[people/ms/u-boot.git] / include / configs / zynq-common.h

/*
 * (C) Copyright 2012 Michal Simek <monstr@monstr.eu>
 * (C) Copyright 2013 Xilinx, Inc.
 *
 * Common configuration options for all Zynq boards.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_ZYNQ_COMMON_H
#define __CONFIG_ZYNQ_COMMON_H

/* High Level configuration Options */
#define CONFIG_ARMV7
#define CONFIG_ZYNQ

/* CPU clock */
#ifndef CONFIG_CPU_FREQ_HZ
# define CONFIG_CPU_FREQ_HZ	800000000
#endif

/* Cache options */
#define CONFIG_CMD_CACHE
#define CONFIG_SYS_CACHELINE_SIZE	32

#define CONFIG_SYS_L2CACHE_OFF
#ifndef CONFIG_SYS_L2CACHE_OFF
# define CONFIG_SYS_L2_PL310
# define CONFIG_SYS_PL310_BASE		0xf8f02000
#endif

/* Serial drivers */
#define CONFIG_BAUDRATE		115200
/* The following table includes the supported baudrates */
#define CONFIG_SYS_BAUDRATE_TABLE  \
	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}

/* DCC driver */
#if defined(CONFIG_ZYNQ_DCC)
# define CONFIG_ARM_DCC
# define CONFIG_CPU_V6 /* Required by CONFIG_ARM_DCC */
#else
# define CONFIG_ZYNQ_SERIAL
#endif

/* Ethernet driver */
#if defined(CONFIG_ZYNQ_GEM0) || defined(CONFIG_ZYNQ_GEM1)
# define CONFIG_NET_MULTI
# define CONFIG_ZYNQ_GEM
# define CONFIG_MII
# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
# define CONFIG_PHYLIB
# define CONFIG_PHY_MARVELL
#endif

/* SPI */
#ifdef CONFIG_ZYNQ_SPI
# define CONFIG_SPI_FLASH
# define CONFIG_SPI_FLASH_SST
# define CONFIG_CMD_SF
#endif

/* NOR */
#ifndef CONFIG_SYS_NO_FLASH
# define CONFIG_SYS_FLASH_BASE		0xE2000000
# define CONFIG_SYS_FLASH_SIZE		(16 * 1024 * 1024)
# define CONFIG_SYS_MAX_FLASH_BANKS	1
# define CONFIG_SYS_MAX_FLASH_SECT	512
# define CONFIG_SYS_FLASH_ERASE_TOUT	1000
# define CONFIG_SYS_FLASH_WRITE_TOUT	5000
# define CONFIG_FLASH_SHOW_PROGRESS	10
# define CONFIG_SYS_FLASH_CFI
# undef CONFIG_SYS_FLASH_EMPTY_INFO
# define CONFIG_FLASH_CFI_DRIVER
# undef CONFIG_SYS_FLASH_PROTECTION
# define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
#endif

/* MMC */
#if defined(CONFIG_ZYNQ_SDHCI0) || defined(CONFIG_ZYNQ_SDHCI1)
# define CONFIG_MMC
# define CONFIG_GENERIC_MMC
# define CONFIG_SDHCI
# define CONFIG_ZYNQ_SDHCI
# define CONFIG_CMD_MMC
# define CONFIG_CMD_FAT
# define CONFIG_SUPPORT_VFAT
# define CONFIG_CMD_EXT2
# define CONFIG_DOS_PARTITION
#endif

/* I2C */
#if defined(CONFIG_ZYNQ_I2C0) || defined(CONFIG_ZYNQ_I2C1)
# define CONFIG_CMD_I2C
# define CONFIG_SYS_I2C
# define CONFIG_SYS_I2C_ZYNQ
# define CONFIG_SYS_I2C_ZYNQ_SPEED		100000
# define CONFIG_SYS_I2C_ZYNQ_SLAVE		1
#endif

/* EEPROM */
#ifdef CONFIG_ZYNQ_EEPROM
# define CONFIG_CMD_EEPROM
# define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
# define CONFIG_SYS_I2C_EEPROM_ADDR		0x54
# define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4
# define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5
# define CONFIG_SYS_EEPROM_SIZE			1024 /* Bytes */
#endif

#define CONFIG_BOOTP_SERVERIP
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
#define CONFIG_BOOTP_MAY_FAIL

/* Total Size of Environment Sector */
#define CONFIG_ENV_SIZE			(128 << 10)

/* Allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE

/* Environment */
#ifndef CONFIG_ENV_IS_NOWHERE
# ifndef CONFIG_SYS_NO_FLASH
#  define CONFIG_ENV_IS_IN_FLASH
# elif defined(CONFIG_SYS_NO_FLASH)
#  define CONFIG_ENV_IS_NOWHERE
# endif

# define CONFIG_ENV_SECT_SIZE		CONFIG_ENV_SIZE
# define CONFIG_ENV_OFFSET		0xE0000
# define CONFIG_CMD_SAVEENV
#endif

/* Default environment */
#define CONFIG_EXTRA_ENV_SETTINGS	\
	"fit_image=fit.itb\0"		\
	"load_addr=0x2000000\0"		\
	"fit_size=0x800000\0"		\
	"flash_off=0x100000\0"		\
	"nor_flash_off=0xE2100000\0"	\
	"fdt_high=0x20000000\0"		\
	"initrd_high=0x20000000\0"	\
	"norboot=echo Copying FIT from NOR flash to RAM... && " \
		"cp.b ${nor_flash_off} ${load_addr} ${fit_size} && " \
		"bootm ${load_addr}\0" \
	"sdboot=echo Copying FIT from SD to RAM... && " \
		"fatload mmc 0 ${load_addr} ${fit_image} && " \
		"bootm ${load_addr}\0" \
	"jtagboot=echo TFTPing FIT to RAM... && " \
		"tftpboot ${load_addr} ${fit_image} && " \
		"bootm ${load_addr}\0"
#define CONFIG_BOOTCOMMAND		"run $modeboot"
#define CONFIG_BOOTDELAY		3 /* -1 to Disable autoboot */
#define CONFIG_SYS_LOAD_ADDR		0 /* default? */

/* Miscellaneous configurable options */
#define CONFIG_SYS_PROMPT		"zynq-uboot> "
#define CONFIG_SYS_HUSH_PARSER

#define CONFIG_CMDLINE_EDITING
#define CONFIG_AUTO_COMPLETE
#define CONFIG_BOARD_LATE_INIT
#define CONFIG_SYS_LONGHELP
#define CONFIG_SYS_MAXARGS		15 /* max number of command args */
#define CONFIG_SYS_CBSIZE		256 /* Console I/O Buffer Size */
#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
					sizeof(CONFIG_SYS_PROMPT) + 16)

/* Physical Memory map */
#define CONFIG_SYS_TEXT_BASE		0x4000000

#define CONFIG_NR_DRAM_BANKS		1
#define CONFIG_SYS_SDRAM_BASE		0

#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + 0x1000)

#define CONFIG_SYS_MALLOC_LEN		0x400000
#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_SDRAM_BASE
#define CONFIG_SYS_INIT_RAM_SIZE	CONFIG_SYS_MALLOC_LEN
#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
					CONFIG_SYS_INIT_RAM_SIZE - \
					GENERATED_GBL_DATA_SIZE)

/* Enable the PL to be downloaded */
#define CONFIG_FPGA
#define CONFIG_FPGA_XILINX
#define CONFIG_FPGA_ZYNQPL
#define CONFIG_CMD_FPGA

/* Open Firmware flat tree */
#define CONFIG_OF_LIBFDT

/* FIT support */
#define CONFIG_FIT
#define CONFIG_FIT_VERBOSE	1 /* enable fit_format_{error,warning}() */

/* FDT support */
#define CONFIG_OF_CONTROL
#define CONFIG_OF_SEPARATE
#define CONFIG_DISPLAY_BOARDINFO_LATE

/* RSA support */
#define CONFIG_FIT_SIGNATURE
#define CONFIG_RSA

/* Extend size of kernel image for uncompression */
#define CONFIG_SYS_BOOTM_LEN	(20 * 1024 * 1024)

/* Boot FreeBSD/vxWorks from an ELF image */
#if defined(CONFIG_ZYNQ_BOOT_FREEBSD)
# define CONFIG_API
# define CONFIG_CMD_ELF
# define CONFIG_SYS_MMC_MAX_DEVICE	1
#endif

#define CONFIG_SYS_LDSCRIPT  "arch/arm/cpu/armv7/zynq/u-boot.lds"

/* Commands */
#include <config_cmd_default.h>

#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_MII
#define CONFIG_CMD_TFTPPUT

#endif /* __CONFIG_ZYNQ_COMMON_H */
Commit	Line	Data
f22651cf MS	1	/*
f22651cf MS	2	* (C) Copyright 2012 Michal Simek <monstr@monstr.eu>
06fe8dae JT	3	* (C) Copyright 2013 Xilinx, Inc.
	4	*
	5	* Common configuration options for all Zynq boards.
f22651cf	6	*
1a459660	7	* SPDX-License-Identifier: GPL-2.0+
f22651cf MS	8	*/
f22651cf MS	9
06fe8dae JT	10	#ifndef __CONFIG_ZYNQ_COMMON_H
06fe8dae JT	11	#define __CONFIG_ZYNQ_COMMON_H
f22651cf	12
53e49f74 JT	13	/* High Level configuration Options */
53e49f74 JT	14	#define CONFIG_ARMV7
f22651cf MS	15	#define CONFIG_ZYNQ
	16
	17	/* CPU clock */
53e49f74 JT	18	#ifndef CONFIG_CPU_FREQ_HZ
	19	# define CONFIG_CPU_FREQ_HZ 800000000
	20	#endif
f22651cf	21
8cfac504 JT	22	/* Cache options */
	23	#define CONFIG_CMD_CACHE
	24	#define CONFIG_SYS_CACHELINE_SIZE 32
	25
	26	#define CONFIG_SYS_L2CACHE_OFF
	27	#ifndef CONFIG_SYS_L2CACHE_OFF
	28	# define CONFIG_SYS_L2_PL310
	29	# define CONFIG_SYS_PL310_BASE 0xf8f02000
	30	#endif
	31
53e49f74 JT	32	/* Serial drivers */
53e49f74 JT	33	#define CONFIG_BAUDRATE 115200
f22651cf MS	34	/* The following table includes the supported baudrates */
	35	#define CONFIG_SYS_BAUDRATE_TABLE \
	36	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
	37
53e49f74 JT	38	/* DCC driver */
	39	#if defined(CONFIG_ZYNQ_DCC)
	40	# define CONFIG_ARM_DCC
	41	# define CONFIG_CPU_V6 /* Required by CONFIG_ARM_DCC */
bf834950 MS	42	#else
bf834950 MS	43	# define CONFIG_ZYNQ_SERIAL
53e49f74 JT	44	#endif
53e49f74 JT	45
f22651cf	46	/* Ethernet driver */
88fcfb1c JT	47	#if defined(CONFIG_ZYNQ_GEM0) \|\| defined(CONFIG_ZYNQ_GEM1)
	48	# define CONFIG_NET_MULTI
	49	# define CONFIG_ZYNQ_GEM
	50	# define CONFIG_MII
	51	# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
	52	# define CONFIG_PHYLIB
	53	# define CONFIG_PHY_MARVELL
	54	#endif
f22651cf	55
53e49f74 JT	56	/* SPI */
	57	#ifdef CONFIG_ZYNQ_SPI
	58	# define CONFIG_SPI_FLASH
	59	# define CONFIG_SPI_FLASH_SST
	60	# define CONFIG_CMD_SF
	61	#endif
	62
fe5eddbf JT	63	/* NOR */
	64	#ifndef CONFIG_SYS_NO_FLASH
	65	# define CONFIG_SYS_FLASH_BASE 0xE2000000
	66	# define CONFIG_SYS_FLASH_SIZE (16 * 1024 * 1024)
	67	# define CONFIG_SYS_MAX_FLASH_BANKS 1
	68	# define CONFIG_SYS_MAX_FLASH_SECT 512
	69	# define CONFIG_SYS_FLASH_ERASE_TOUT 1000
	70	# define CONFIG_SYS_FLASH_WRITE_TOUT 5000
	71	# define CONFIG_FLASH_SHOW_PROGRESS 10
	72	# define CONFIG_SYS_FLASH_CFI
	73	# undef CONFIG_SYS_FLASH_EMPTY_INFO
	74	# define CONFIG_FLASH_CFI_DRIVER
	75	# undef CONFIG_SYS_FLASH_PROTECTION
	76	# define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
	77	#endif
	78
293eb33f MS	79	/* MMC */
	80	#if defined(CONFIG_ZYNQ_SDHCI0) \|\| defined(CONFIG_ZYNQ_SDHCI1)
	81	# define CONFIG_MMC
	82	# define CONFIG_GENERIC_MMC
	83	# define CONFIG_SDHCI
	84	# define CONFIG_ZYNQ_SDHCI
	85	# define CONFIG_CMD_MMC
	86	# define CONFIG_CMD_FAT
	87	# define CONFIG_SUPPORT_VFAT
	88	# define CONFIG_CMD_EXT2
	89	# define CONFIG_DOS_PARTITION
	90	#endif
	91
8934f784 MS	92	/* I2C */
	93	#if defined(CONFIG_ZYNQ_I2C0) \|\| defined(CONFIG_ZYNQ_I2C1)
	94	# define CONFIG_CMD_I2C
0bdffe71 HS	95	# define CONFIG_SYS_I2C
	96	# define CONFIG_SYS_I2C_ZYNQ
	97	# define CONFIG_SYS_I2C_ZYNQ_SPEED 100000
	98	# define CONFIG_SYS_I2C_ZYNQ_SLAVE 1
8934f784 MS	99	#endif
8934f784 MS	100
65da1efd JT	101	/* EEPROM */
	102	#ifdef CONFIG_ZYNQ_EEPROM
	103	# define CONFIG_CMD_EEPROM
	104	# define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
	105	# define CONFIG_SYS_I2C_EEPROM_ADDR 0x54
	106	# define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4
	107	# define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
	108	# define CONFIG_SYS_EEPROM_SIZE 1024 /* Bytes */
	109	#endif
	110
f22651cf MS	111	#define CONFIG_BOOTP_SERVERIP
	112	#define CONFIG_BOOTP_BOOTPATH
	113	#define CONFIG_BOOTP_GATEWAY
	114	#define CONFIG_BOOTP_HOSTNAME
	115	#define CONFIG_BOOTP_MAY_FAIL
	116
18eee22f JT	117	/* Total Size of Environment Sector */
	118	#define CONFIG_ENV_SIZE (128 << 10)
	119
b660ca13 JT	120	/* Allow to overwrite serial and ethaddr */
	121	#define CONFIG_ENV_OVERWRITE
	122
f22651cf	123	/* Environment */
ed53e4d6 JT	124	#ifndef CONFIG_ENV_IS_NOWHERE
	125	# ifndef CONFIG_SYS_NO_FLASH
	126	# define CONFIG_ENV_IS_IN_FLASH
	127	# elif defined(CONFIG_SYS_NO_FLASH)
	128	# define CONFIG_ENV_IS_NOWHERE
	129	# endif
	130
	131	# define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE
	132	# define CONFIG_ENV_OFFSET 0xE0000
	133	# define CONFIG_CMD_SAVEENV
	134	#endif
e83f61a6 JT	135
	136	/* Default environment */
	137	#define CONFIG_EXTRA_ENV_SETTINGS \
	138	"fit_image=fit.itb\0" \
	139	"load_addr=0x2000000\0" \
	140	"fit_size=0x800000\0" \
	141	"flash_off=0x100000\0" \
	142	"nor_flash_off=0xE2100000\0" \
	143	"fdt_high=0x20000000\0" \
	144	"initrd_high=0x20000000\0" \
	145	"norboot=echo Copying FIT from NOR flash to RAM... && " \
	146	"cp.b ${nor_flash_off} ${load_addr} ${fit_size} && " \
	147	"bootm ${load_addr}\0" \
	148	"sdboot=echo Copying FIT from SD to RAM... && " \
	149	"fatload mmc 0 ${load_addr} ${fit_image} && " \
	150	"bootm ${load_addr}\0" \
	151	"jtagboot=echo TFTPing FIT to RAM... && " \
dfa94058	152	"tftpboot ${load_addr} ${fit_image} && " \
e83f61a6 JT	153	"bootm ${load_addr}\0"
	154	#define CONFIG_BOOTCOMMAND "run $modeboot"
	155	#define CONFIG_BOOTDELAY 3 /* -1 to Disable autoboot */
	156	#define CONFIG_SYS_LOAD_ADDR 0 /* default? */
f22651cf	157
36e0e197 JT	158	/* Miscellaneous configurable options */
	159	#define CONFIG_SYS_PROMPT "zynq-uboot> "
	160	#define CONFIG_SYS_HUSH_PARSER
	161
	162	#define CONFIG_CMDLINE_EDITING
	163	#define CONFIG_AUTO_COMPLETE
b3de9249	164	#define CONFIG_BOARD_LATE_INIT
36e0e197 JT	165	#define CONFIG_SYS_LONGHELP
	166	#define CONFIG_SYS_MAXARGS 15 /* max number of command args */
	167	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
	168	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
f22651cf MS	169	sizeof(CONFIG_SYS_PROMPT) + 16)
f22651cf MS	170
7cd04192	171	/* Physical Memory map */
0f5c2156	172	#define CONFIG_SYS_TEXT_BASE 0x4000000
f22651cf	173
7cd04192 JT	174	#define CONFIG_NR_DRAM_BANKS 1
7cd04192 JT	175	#define CONFIG_SYS_SDRAM_BASE 0
7cd04192 JT	176
	177	#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
	178	#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x1000)
	179
53e49f74	180	#define CONFIG_SYS_MALLOC_LEN 0x400000
7cd04192 JT	181	#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_SDRAM_BASE
	182	#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_MALLOC_LEN
	183	#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
	184	CONFIG_SYS_INIT_RAM_SIZE - \
	185	GENERATED_GBL_DATA_SIZE)
53e49f74 JT	186
	187	/* Enable the PL to be downloaded */
	188	#define CONFIG_FPGA
	189	#define CONFIG_FPGA_XILINX
	190	#define CONFIG_FPGA_ZYNQPL
	191	#define CONFIG_CMD_FPGA
	192
	193	/* Open Firmware flat tree */
	194	#define CONFIG_OF_LIBFDT
	195
	196	/* FIT support */
f22651cf	197	#define CONFIG_FIT
773590eb	198	#define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */
f22651cf	199
f8f36c5d JT	200	/* FDT support */
	201	#define CONFIG_OF_CONTROL
	202	#define CONFIG_OF_SEPARATE
	203	#define CONFIG_DISPLAY_BOARDINFO_LATE
	204
a8826eb4 JT	205	/* RSA support */
	206	#define CONFIG_FIT_SIGNATURE
	207	#define CONFIG_RSA
	208
ae9f4899 MS	209	/* Extend size of kernel image for uncompression */
	210	#define CONFIG_SYS_BOOTM_LEN (20 * 1024 * 1024)
	211
09ed635b JT	212	/* Boot FreeBSD/vxWorks from an ELF image */
	213	#if defined(CONFIG_ZYNQ_BOOT_FREEBSD)
	214	# define CONFIG_API
	215	# define CONFIG_CMD_ELF
	216	# define CONFIG_SYS_MMC_MAX_DEVICE 1
	217	#endif
	218
38716189 MS	219	#define CONFIG_SYS_LDSCRIPT "arch/arm/cpu/armv7/zynq/u-boot.lds"
38716189 MS	220
f22651cf MS	221	/* Commands */
	222	#include <config_cmd_default.h>
	223
	224	#define CONFIG_CMD_PING
	225	#define CONFIG_CMD_DHCP
	226	#define CONFIG_CMD_MII
427b2d4e	227	#define CONFIG_CMD_TFTPPUT
f22651cf	228
06fe8dae	229	#endif /* __CONFIG_ZYNQ_COMMON_H */