]> git.ipfire.org Git - people/ms/u-boot.git/blame - include/scsi.h
board: axs103 - add maintainer information
[people/ms/u-boot.git] / include / scsi.h
CommitLineData
e85390dc
WD
1/*
2 * (C) Copyright 2001
3 * Denis Peter, MPL AG Switzerland
4 *
1a459660 5 * SPDX-License-Identifier: GPL-2.0+
e85390dc
WD
6 */
7 #ifndef _SCSI_H
8 #define _SCSI_H
9
10typedef struct SCSI_cmd_block{
11 unsigned char cmd[16]; /* command */
f5766139
PS
12 /* for request sense */
13 unsigned char sense_buf[64]
14 __attribute__((aligned(ARCH_DMA_MINALIGN)));
e85390dc
WD
15 unsigned char status; /* SCSI Status */
16 unsigned char target; /* Target ID */
17 unsigned char lun; /* Target LUN */
18 unsigned char cmdlen; /* command len */
19 unsigned long datalen; /* Total data length */
53677ef1 20 unsigned char * pdata; /* pointer to data */
e85390dc
WD
21 unsigned char msgout[12]; /* Messge out buffer (NOT USED) */
22 unsigned char msgin[12]; /* Message in buffer */
23 unsigned char sensecmdlen; /* Sense command len */
24 unsigned long sensedatalen; /* Sense data len */
25 unsigned char sensecmd[6]; /* Sense command */
26 unsigned long contr_stat; /* Controller Status */
27 unsigned long trans_bytes; /* tranfered bytes */
28
29 unsigned int priv;
30}ccb;
31
32/*-----------------------------------------------------------
33**
34** SCSI constants.
35**
36**-----------------------------------------------------------
37*/
38
39/*
40** Messages
41*/
42
43#define M_COMPLETE (0x00)
44#define M_EXTENDED (0x01)
45#define M_SAVE_DP (0x02)
46#define M_RESTORE_DP (0x03)
47#define M_DISCONNECT (0x04)
48#define M_ID_ERROR (0x05)
49#define M_ABORT (0x06)
50#define M_REJECT (0x07)
51#define M_NOOP (0x08)
52#define M_PARITY (0x09)
53#define M_LCOMPLETE (0x0a)
54#define M_FCOMPLETE (0x0b)
55#define M_RESET (0x0c)
56#define M_ABORT_TAG (0x0d)
57#define M_CLEAR_QUEUE (0x0e)
58#define M_INIT_REC (0x0f)
59#define M_REL_REC (0x10)
60#define M_TERMINATE (0x11)
61#define M_SIMPLE_TAG (0x20)
62#define M_HEAD_TAG (0x21)
63#define M_ORDERED_TAG (0x22)
64#define M_IGN_RESIDUE (0x23)
53677ef1 65#define M_IDENTIFY (0x80)
e85390dc
WD
66
67#define M_X_MODIFY_DP (0x00)
68#define M_X_SYNC_REQ (0x01)
69#define M_X_WIDE_REQ (0x03)
70#define M_X_PPR_REQ (0x04)
71
72
73/*
74** Status
75*/
76
77#define S_GOOD (0x00)
78#define S_CHECK_COND (0x02)
79#define S_COND_MET (0x04)
80#define S_BUSY (0x08)
81#define S_INT (0x10)
82#define S_INT_COND_MET (0x14)
83#define S_CONFLICT (0x18)
84#define S_TERMINATED (0x20)
85#define S_QUEUE_FULL (0x28)
86#define S_ILLEGAL (0xff)
87#define S_SENSE (0x80)
88
89/*
90 * Sense_keys
91 */
92
93#define SENSE_NO_SENSE 0x0
94#define SENSE_RECOVERED_ERROR 0x1
95#define SENSE_NOT_READY 0x2
96#define SENSE_MEDIUM_ERROR 0x3
97#define SENSE_HARDWARE_ERROR 0x4
98#define SENSE_ILLEGAL_REQUEST 0x5
99#define SENSE_UNIT_ATTENTION 0x6
100#define SENSE_DATA_PROTECT 0x7
101#define SENSE_BLANK_CHECK 0x8
102#define SENSE_VENDOR_SPECIFIC 0x9
103#define SENSE_COPY_ABORTED 0xA
104#define SENSE_ABORTED_COMMAND 0xB
105#define SENSE_VOLUME_OVERFLOW 0xD
106#define SENSE_MISCOMPARE 0xE
107
108
109#define SCSI_CHANGE_DEF 0x40 /* Change Definition (Optional) */
110#define SCSI_COMPARE 0x39 /* Compare (O) */
111#define SCSI_COPY 0x18 /* Copy (O) */
112#define SCSI_COP_VERIFY 0x3A /* Copy and Verify (O) */
113#define SCSI_INQUIRY 0x12 /* Inquiry (MANDATORY) */
114#define SCSI_LOG_SELECT 0x4C /* Log Select (O) */
115#define SCSI_LOG_SENSE 0x4D /* Log Sense (O) */
116#define SCSI_MODE_SEL6 0x15 /* Mode Select 6-byte (Device Specific) */
117#define SCSI_MODE_SEL10 0x55 /* Mode Select 10-byte (Device Specific) */
118#define SCSI_MODE_SEN6 0x1A /* Mode Sense 6-byte (Device Specific) */
119#define SCSI_MODE_SEN10 0x5A /* Mode Sense 10-byte (Device Specific) */
120#define SCSI_READ_BUFF 0x3C /* Read Buffer (O) */
121#define SCSI_REQ_SENSE 0x03 /* Request Sense (MANDATORY) */
122#define SCSI_SEND_DIAG 0x1D /* Send Diagnostic (O) */
123#define SCSI_TST_U_RDY 0x00 /* Test Unit Ready (MANDATORY) */
124#define SCSI_WRITE_BUFF 0x3B /* Write Buffer (O) */
125/***************************************************************************
126 * %%% Commands Unique to Direct Access Devices %%%
127 ***************************************************************************/
128#define SCSI_COMPARE 0x39 /* Compare (O) */
129#define SCSI_FORMAT 0x04 /* Format Unit (MANDATORY) */
130#define SCSI_LCK_UN_CAC 0x36 /* Lock Unlock Cache (O) */
131#define SCSI_PREFETCH 0x34 /* Prefetch (O) */
132#define SCSI_MED_REMOVL 0x1E /* Prevent/Allow medium Removal (O) */
133#define SCSI_READ6 0x08 /* Read 6-byte (MANDATORY) */
134#define SCSI_READ10 0x28 /* Read 10-byte (MANDATORY) */
2b42c931 135#define SCSI_READ16 0x48
e85390dc 136#define SCSI_RD_CAPAC 0x25 /* Read Capacity (MANDATORY) */
19d1d41e
GB
137#define SCSI_RD_CAPAC10 SCSI_RD_CAPAC /* Read Capacity (10) */
138#define SCSI_RD_CAPAC16 0x9e /* Read Capacity (16) */
e85390dc
WD
139#define SCSI_RD_DEFECT 0x37 /* Read Defect Data (O) */
140#define SCSI_READ_LONG 0x3E /* Read Long (O) */
141#define SCSI_REASS_BLK 0x07 /* Reassign Blocks (O) */
142#define SCSI_RCV_DIAG 0x1C /* Receive Diagnostic Results (O) */
143#define SCSI_RELEASE 0x17 /* Release Unit (MANDATORY) */
144#define SCSI_REZERO 0x01 /* Rezero Unit (O) */
145#define SCSI_SRCH_DAT_E 0x31 /* Search Data Equal (O) */
146#define SCSI_SRCH_DAT_H 0x30 /* Search Data High (O) */
147#define SCSI_SRCH_DAT_L 0x32 /* Search Data Low (O) */
148#define SCSI_SEEK6 0x0B /* Seek 6-Byte (O) */
149#define SCSI_SEEK10 0x2B /* Seek 10-Byte (O) */
150#define SCSI_SEND_DIAG 0x1D /* Send Diagnostics (MANDATORY) */
151#define SCSI_SET_LIMIT 0x33 /* Set Limits (O) */
152#define SCSI_START_STP 0x1B /* Start/Stop Unit (O) */
153#define SCSI_SYNC_CACHE 0x35 /* Synchronize Cache (O) */
154#define SCSI_VERIFY 0x2F /* Verify (O) */
155#define SCSI_WRITE6 0x0A /* Write 6-Byte (MANDATORY) */
156#define SCSI_WRITE10 0x2A /* Write 10-Byte (MANDATORY) */
157#define SCSI_WRT_VERIFY 0x2E /* Write and Verify (O) */
158#define SCSI_WRITE_LONG 0x3F /* Write Long (O) */
159#define SCSI_WRITE_SAME 0x41 /* Write Same (O) */
160
161
162/****************************************************************************
163 * decleration of functions which have to reside in the LowLevel Part Driver
164 */
165
166void scsi_print_error(ccb *pccb);
167int scsi_exec(ccb *pccb);
168void scsi_bus_reset(void);
169void scsi_low_level_init(int busdevfunc);
170
171
172/***************************************************************************
173 * functions residing inside cmd_scsi.c
174 */
175void scsi_init(void);
942e3143 176void scsi_scan(int mode);
e85390dc 177
447c031b
SR
178/** @return the number of scsi disks */
179int scsi_get_disk_count(void);
e85390dc 180
e85390dc
WD
181#define SCSI_IDENTIFY 0xC0 /* not used */
182
183/* Hardware errors */
184#define SCSI_SEL_TIME_OUT 0x00000101 /* Selection time out */
185#define SCSI_HNS_TIME_OUT 0x00000102 /* Handshake */
53677ef1 186#define SCSI_MA_TIME_OUT 0x00000103 /* Phase error */
e85390dc
WD
187#define SCSI_UNEXP_DIS 0x00000104 /* unexpected disconnect */
188
189#define SCSI_INT_STATE 0x00010000 /* unknown Interrupt number is stored in 16 LSB */
190
e85390dc 191#endif /* _SCSI_H */