[people/ms/u-boot.git] / scripts / Makefile.lib

# Backward compatibility
asflags-y  += $(EXTRA_AFLAGS)
ccflags-y  += $(EXTRA_CFLAGS)
cppflags-y += $(EXTRA_CPPFLAGS)
ldflags-y  += $(EXTRA_LDFLAGS)

#
# flags that take effect in sub directories
export KBUILD_SUBDIR_ASFLAGS := $(KBUILD_SUBDIR_ASFLAGS) $(subdir-asflags-y)
export KBUILD_SUBDIR_CCFLAGS := $(KBUILD_SUBDIR_CCFLAGS) $(subdir-ccflags-y)

# Figure out what we need to build from the various variables
# ===========================================================================

# When an object is listed to be built compiled-in and modular,
# only build the compiled-in version

obj-m := $(filter-out $(obj-y),$(obj-m))

# Libraries are always collected in one lib file.
# Filter out objects already built-in

lib-y := $(filter-out $(obj-y), $(sort $(lib-y) $(lib-m)))


# Handle objects in subdirs
# ---------------------------------------------------------------------------
# o if we encounter foo/ in $(obj-y), replace it by foo/built-in.o
#   and add the directory to the list of dirs to descend into: $(subdir-y)
# o if we encounter foo/ in $(obj-m), remove it from $(obj-m) 
#   and add the directory to the list of dirs to descend into: $(subdir-m)

# Determine modorder.
# Unfortunately, we don't have information about ordering between -y
# and -m subdirs.  Just put -y's first.
modorder	:= $(patsubst %/,%/modules.order, $(filter %/, $(obj-y)) $(obj-m:.o=.ko))

__subdir-y	:= $(patsubst %/,%,$(filter %/, $(obj-y)))
subdir-y	+= $(__subdir-y)
__subdir-m	:= $(patsubst %/,%,$(filter %/, $(obj-m)))
subdir-m	+= $(__subdir-m)
obj-y		:= $(patsubst %/, %/built-in.o, $(obj-y))
obj-m		:= $(filter-out %/, $(obj-m))

# Subdirectories we need to descend into

subdir-ym	:= $(sort $(subdir-y) $(subdir-m))

# if $(foo-objs) exists, foo.o is a composite object 
multi-used-y := $(sort $(foreach m,$(obj-y), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))), $(m))))
multi-used-m := $(sort $(foreach m,$(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))), $(m))))
multi-used   := $(multi-used-y) $(multi-used-m)
single-used-m := $(sort $(filter-out $(multi-used-m),$(obj-m)))

# Build list of the parts of our composite objects, our composite
# objects depend on those (obviously)
multi-objs-y := $(foreach m, $(multi-used-y), $($(m:.o=-objs)) $($(m:.o=-y)))
multi-objs-m := $(foreach m, $(multi-used-m), $($(m:.o=-objs)) $($(m:.o=-y)))
multi-objs   := $(multi-objs-y) $(multi-objs-m)

# $(subdir-obj-y) is the list of objects in $(obj-y) which uses dir/ to
# tell kbuild to descend
subdir-obj-y := $(filter %/built-in.o, $(obj-y))

# $(obj-dirs) is a list of directories that contain object files
obj-dirs := $(dir $(multi-objs) $(obj-y))

# Replace multi-part objects by their individual parts, look at local dir only
real-objs-y := $(foreach m, $(filter-out $(subdir-obj-y), $(obj-y)), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))),$($(m:.o=-objs)) $($(m:.o=-y)),$(m))) $(extra-y)
real-objs-m := $(foreach m, $(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))),$($(m:.o=-objs)) $($(m:.o=-y)),$(m)))

# Add subdir path

extra-y		:= $(addprefix $(obj)/,$(extra-y))
always		:= $(addprefix $(obj)/,$(always))
targets		:= $(addprefix $(obj)/,$(targets))
modorder	:= $(addprefix $(obj)/,$(modorder))
obj-y		:= $(addprefix $(obj)/,$(obj-y))
obj-m		:= $(addprefix $(obj)/,$(obj-m))
lib-y		:= $(addprefix $(obj)/,$(lib-y))
subdir-obj-y	:= $(addprefix $(obj)/,$(subdir-obj-y))
real-objs-y	:= $(addprefix $(obj)/,$(real-objs-y))
real-objs-m	:= $(addprefix $(obj)/,$(real-objs-m))
single-used-m	:= $(addprefix $(obj)/,$(single-used-m))
multi-used-y	:= $(addprefix $(obj)/,$(multi-used-y))
multi-used-m	:= $(addprefix $(obj)/,$(multi-used-m))
multi-objs-y	:= $(addprefix $(obj)/,$(multi-objs-y))
multi-objs-m	:= $(addprefix $(obj)/,$(multi-objs-m))
subdir-ym	:= $(addprefix $(obj)/,$(subdir-ym))
obj-dirs	:= $(addprefix $(obj)/,$(obj-dirs))

# These flags are needed for modversions and compiling, so we define them here
# already
# $(modname_flags) #defines KBUILD_MODNAME as the name of the module it will 
# end up in (or would, if it gets compiled in)
# Note: Files that end up in two or more modules are compiled without the
#       KBUILD_MODNAME definition. The reason is that any made-up name would
#       differ in different configs.
name-fix = $(subst $(comma),_,$(subst -,_,$1))
basename_flags = -D"KBUILD_BASENAME=KBUILD_STR($(call name-fix,$(basetarget)))"
modname_flags  = $(if $(filter 1,$(words $(modname))),\
                 -D"KBUILD_MODNAME=KBUILD_STR($(call name-fix,$(modname)))")

# U-Boot also uses $(CPPFLAGS)
orig_c_flags   = $(KBUILD_CPPFLAGS) $(CPPFLAGS) $(KBUILD_CFLAGS) $(KBUILD_SUBDIR_CCFLAGS) \
                 $(ccflags-y) $(CFLAGS_$(basetarget).o)
_c_flags       = $(filter-out $(CFLAGS_REMOVE_$(basetarget).o), $(orig_c_flags))
_a_flags       = $(KBUILD_CPPFLAGS) $(CPPFLAGS) $(KBUILD_AFLAGS) $(KBUILD_SUBDIR_ASFLAGS) \
                 $(asflags-y) $(AFLAGS_$(basetarget).o)
_cpp_flags     = $(KBUILD_CPPFLAGS) $(CPPFLAGS) $(cppflags-y) $(CPPFLAGS_$(@F))

#
# Enable gcov profiling flags for a file, directory or for all files depending
# on variables GCOV_PROFILE_obj.o, GCOV_PROFILE and CONFIG_GCOV_PROFILE_ALL
# (in this order)
#
ifeq ($(CONFIG_GCOV_KERNEL),y)
_c_flags += $(if $(patsubst n%,, \
		$(GCOV_PROFILE_$(basetarget).o)$(GCOV_PROFILE)$(CONFIG_GCOV_PROFILE_ALL)), \
		$(CFLAGS_GCOV))
endif

# If building the kernel in a separate objtree expand all occurrences
# of -Idir to -I$(srctree)/dir except for absolute paths (starting with '/').

ifeq ($(KBUILD_SRC),)
__c_flags	= $(_c_flags)
__a_flags	= $(_a_flags)
__cpp_flags     = $(_cpp_flags)
else

# -I$(obj) locates generated .h files
# $(call addtree,-I$(obj)) locates .h files in srctree, from generated .c files
#   and locates generated .h files
# FIXME: Replace both with specific CFLAGS* statements in the makefiles
__c_flags	= $(call addtree,-I$(obj)) $(call flags,_c_flags)
__a_flags	=                          $(call flags,_a_flags)
__cpp_flags     =                          $(call flags,_cpp_flags)
endif

# Modified for U-Boot: LINUXINCLUDE -> UBOOTINCLUDE
c_flags        = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(UBOOTINCLUDE)     \
		 $(__c_flags) $(modkern_cflags)                           \
		 -D"KBUILD_STR(s)=\#s" $(basename_flags) $(modname_flags)

a_flags        = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(UBOOTINCLUDE)     \
		 $(__a_flags) $(modkern_aflags)

cpp_flags      = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(UBOOTINCLUDE)     \
		 $(__cpp_flags)

ld_flags       = $(LDFLAGS) $(ldflags-y)

# Modified for U-Boot
dtc_cpp_flags  = -Wp,-MD,$(depfile).pre.tmp -nostdinc                    \
		 -I$(srctree)/arch/$(ARCH)/dts                           \
		 -undef -D__DTS__

# Finds the multi-part object the current object will be linked into
modname-multi = $(sort $(foreach m,$(multi-used),\
		$(if $(filter $(subst $(obj)/,,$*.o), $($(m:.o=-objs)) $($(m:.o=-y))),$(m:.o=))))

ifdef REGENERATE_PARSERS

# GPERF
# ---------------------------------------------------------------------------
quiet_cmd_gperf = GPERF $@
      cmd_gperf = gperf -t --output-file $@ -a -C -E -g -k 1,3,$$ -p -t $<

.PRECIOUS: $(src)/%.hash.c_shipped
$(src)/%.hash.c_shipped: $(src)/%.gperf
	$(call cmd,gperf)

# LEX
# ---------------------------------------------------------------------------
LEX_PREFIX = $(if $(LEX_PREFIX_${baseprereq}),$(LEX_PREFIX_${baseprereq}),yy)

quiet_cmd_flex = LEX     $@
      cmd_flex = flex -o$@ -L -P $(LEX_PREFIX) $<

.PRECIOUS: $(src)/%.lex.c_shipped
$(src)/%.lex.c_shipped: $(src)/%.l
	$(call cmd,flex)

# YACC
# ---------------------------------------------------------------------------
YACC_PREFIX = $(if $(YACC_PREFIX_${baseprereq}),$(YACC_PREFIX_${baseprereq}),yy)

quiet_cmd_bison = YACC    $@
      cmd_bison = bison -o$@ -t -l -p $(YACC_PREFIX) $<

.PRECIOUS: $(src)/%.tab.c_shipped
$(src)/%.tab.c_shipped: $(src)/%.y
	$(call cmd,bison)

quiet_cmd_bison_h = YACC    $@
      cmd_bison_h = bison -o/dev/null --defines=$@ -t -l -p $(YACC_PREFIX) $<

.PRECIOUS: $(src)/%.tab.h_shipped
$(src)/%.tab.h_shipped: $(src)/%.y
	$(call cmd,bison_h)

endif

# Shipped files
# ===========================================================================

quiet_cmd_shipped = SHIPPED $@
cmd_shipped = cat $< > $@

$(obj)/%: $(src)/%_shipped
	$(call cmd,shipped)

# Commands useful for building a boot image
# ===========================================================================
# 
#	Use as following:
#
#	target: source(s) FORCE
#		$(if_changed,ld/objcopy/gzip)
#
#	and add target to extra-y so that we know we have to
#	read in the saved command line

# Linking
# ---------------------------------------------------------------------------

quiet_cmd_ld = LD      $@
cmd_ld = $(LD) $(LDFLAGS) $(ldflags-y) $(LDFLAGS_$(@F)) \
	       $(filter-out FORCE,$^) -o $@ 

# Objcopy
# ---------------------------------------------------------------------------

quiet_cmd_objcopy = OBJCOPY $@
cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@

# Gzip
# ---------------------------------------------------------------------------

quiet_cmd_gzip = GZIP    $@
cmd_gzip = (cat $(filter-out FORCE,$^) | gzip -n -f -9 > $@) || \
	(rm -f $@ ; false)

# DTC
# ---------------------------------------------------------------------------

# Generate an assembly file to wrap the output of the device tree compiler
quiet_cmd_dt_S_dtb= DTB     $@
# Modified for U-Boot
cmd_dt_S_dtb=						\
(							\
	echo '.section .dtb.init.rodata,"a"';		\
	echo '.global __dtb_$(*F)_begin';		\
	echo '__dtb_$(*F)_begin:';			\
	echo '.incbin "$<" ';				\
	echo '__dtb_$(*F)_end:';			\
	echo '.global __dtb_$(*F)_end';			\
) > $@

$(obj)/%.dtb.S: $(obj)/%.dtb
	$(call cmd,dt_S_dtb)

quiet_cmd_dtc = DTC     $@
# Modified for U-Boot
cmd_dtc = $(CPP) $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \
	dtc -O dtb -o $@ -b 0 \
		-i $(dir $<) $(DTC_FLAGS) \
		-d $(depfile).dtc.tmp $(dtc-tmp) ; \
	cat $(depfile).pre.tmp $(depfile).dtc.tmp > $(depfile)

$(obj)/%.dtb: $(src)/%.dts FORCE
	$(call if_changed_dep,dtc)

dtc-tmp = $(subst $(comma),_,$(dot-target).dts.tmp)

# Bzip2
# ---------------------------------------------------------------------------

# Bzip2 and LZMA do not include size in file... so we have to fake that;
# append the size as a 32-bit littleendian number as gzip does.
size_append = printf $(shell						\
dec_size=0;								\
for F in $1; do								\
	fsize=$$(stat -c "%s" $$F);					\
	dec_size=$$(expr $$dec_size + $$fsize);				\
done;									\
printf "%08x\n" $$dec_size |						\
	sed 's/\(..\)/\1 /g' | {					\
		read ch0 ch1 ch2 ch3;					\
		for ch in $$ch3 $$ch2 $$ch1 $$ch0; do			\
			printf '%s%03o' '\\' $$((0x$$ch)); 		\
		done;							\
	}								\
)

quiet_cmd_bzip2 = BZIP2   $@
cmd_bzip2 = (cat $(filter-out FORCE,$^) | \
	bzip2 -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
	(rm -f $@ ; false)

# Lzma
# ---------------------------------------------------------------------------

quiet_cmd_lzma = LZMA    $@
cmd_lzma = (cat $(filter-out FORCE,$^) | \
	lzma -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
	(rm -f $@ ; false)

quiet_cmd_lzo = LZO     $@
cmd_lzo = (cat $(filter-out FORCE,$^) | \
	lzop -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
	(rm -f $@ ; false)

quiet_cmd_lz4 = LZ4     $@
cmd_lz4 = (cat $(filter-out FORCE,$^) | \
	lz4c -l -c1 stdin stdout && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
	(rm -f $@ ; false)

# U-Boot mkimage
# ---------------------------------------------------------------------------

MKIMAGE := $(srctree)/scripts/mkuboot.sh

# SRCARCH just happens to match slightly more than ARCH (on sparc), so reduces
# the number of overrides in arch makefiles
UIMAGE_ARCH ?= $(SRCARCH)
UIMAGE_COMPRESSION ?= $(if $(2),$(2),none)
UIMAGE_OPTS-y ?=
UIMAGE_TYPE ?= kernel
UIMAGE_LOADADDR ?= arch_must_set_this
UIMAGE_ENTRYADDR ?= $(UIMAGE_LOADADDR)
UIMAGE_NAME ?= 'Linux-$(KERNELRELEASE)'
UIMAGE_IN ?= $<
UIMAGE_OUT ?= $@

quiet_cmd_uimage = UIMAGE  $(UIMAGE_OUT)
      cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A $(UIMAGE_ARCH) -O linux \
			-C $(UIMAGE_COMPRESSION) $(UIMAGE_OPTS-y) \
			-T $(UIMAGE_TYPE) \
			-a $(UIMAGE_LOADADDR) -e $(UIMAGE_ENTRYADDR) \
			-n $(UIMAGE_NAME) -d $(UIMAGE_IN) $(UIMAGE_OUT)

# XZ
# ---------------------------------------------------------------------------
# Use xzkern to compress the kernel image and xzmisc to compress other things.
#
# xzkern uses a big LZMA2 dictionary since it doesn't increase memory usage
# of the kernel decompressor. A BCJ filter is used if it is available for
# the target architecture. xzkern also appends uncompressed size of the data
# using size_append. The .xz format has the size information available at
# the end of the file too, but it's in more complex format and it's good to
# avoid changing the part of the boot code that reads the uncompressed size.
# Note that the bytes added by size_append will make the xz tool think that
# the file is corrupt. This is expected.
#
# xzmisc doesn't use size_append, so it can be used to create normal .xz
# files. xzmisc uses smaller LZMA2 dictionary than xzkern, because a very
# big dictionary would increase the memory usage too much in the multi-call
# decompression mode. A BCJ filter isn't used either.
quiet_cmd_xzkern = XZKERN  $@
cmd_xzkern = (cat $(filter-out FORCE,$^) | \
	sh $(srctree)/scripts/xz_wrap.sh && \
	$(call size_append, $(filter-out FORCE,$^))) > $@ || \
	(rm -f $@ ; false)

quiet_cmd_xzmisc = XZMISC  $@
cmd_xzmisc = (cat $(filter-out FORCE,$^) | \
	xz --check=crc32 --lzma2=dict=1MiB) > $@ || \
	(rm -f $@ ; false)

# misc stuff
# ---------------------------------------------------------------------------
quote:="
Commit	Line	Data
22433fc5 MY	1	# Backward compatibility
	2	asflags-y += $(EXTRA_AFLAGS)
	3	ccflags-y += $(EXTRA_CFLAGS)
	4	cppflags-y += $(EXTRA_CPPFLAGS)
	5	ldflags-y += $(EXTRA_LDFLAGS)
	6
	7	#
	8	# flags that take effect in sub directories
	9	export KBUILD_SUBDIR_ASFLAGS := $(KBUILD_SUBDIR_ASFLAGS) $(subdir-asflags-y)
	10	export KBUILD_SUBDIR_CCFLAGS := $(KBUILD_SUBDIR_CCFLAGS) $(subdir-ccflags-y)
	11
	12	# Figure out what we need to build from the various variables
	13	# ===========================================================================
	14
	15	# When an object is listed to be built compiled-in and modular,
	16	# only build the compiled-in version
	17
	18	obj-m := $(filter-out $(obj-y),$(obj-m))
	19
	20	# Libraries are always collected in one lib file.
	21	# Filter out objects already built-in
	22
	23	lib-y := $(filter-out $(obj-y), $(sort $(lib-y) $(lib-m)))
	24
	25
	26	# Handle objects in subdirs
	27	# ---------------------------------------------------------------------------
	28	# o if we encounter foo/ in $(obj-y), replace it by foo/built-in.o
	29	# and add the directory to the list of dirs to descend into: $(subdir-y)
	30	# o if we encounter foo/ in $(obj-m), remove it from $(obj-m)
	31	# and add the directory to the list of dirs to descend into: $(subdir-m)
	32
	33	# Determine modorder.
	34	# Unfortunately, we don't have information about ordering between -y
	35	# and -m subdirs. Just put -y's first.
	36	modorder := $(patsubst %/,%/modules.order, $(filter %/, $(obj-y)) $(obj-m:.o=.ko))
	37
	38	__subdir-y := $(patsubst %/,%,$(filter %/, $(obj-y)))
	39	subdir-y += $(__subdir-y)
	40	__subdir-m := $(patsubst %/,%,$(filter %/, $(obj-m)))
	41	subdir-m += $(__subdir-m)
	42	obj-y := $(patsubst %/, %/built-in.o, $(obj-y))
	43	obj-m := $(filter-out %/, $(obj-m))
	44
	45	# Subdirectories we need to descend into
	46
	47	subdir-ym := $(sort $(subdir-y) $(subdir-m))
	48
	49	# if $(foo-objs) exists, foo.o is a composite object
	50	multi-used-y := $(sort $(foreach m,$(obj-y), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))), $(m))))
	51	multi-used-m := $(sort $(foreach m,$(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))), $(m))))
	52	multi-used := $(multi-used-y) $(multi-used-m)
	53	single-used-m := $(sort $(filter-out $(multi-used-m),$(obj-m)))
	54
	55	# Build list of the parts of our composite objects, our composite
	56	# objects depend on those (obviously)
	57	multi-objs-y := $(foreach m, $(multi-used-y), $($(m:.o=-objs)) $($(m:.o=-y)))
	58	multi-objs-m := $(foreach m, $(multi-used-m), $($(m:.o=-objs)) $($(m:.o=-y)))
	59	multi-objs := $(multi-objs-y) $(multi-objs-m)
	60
	61	# $(subdir-obj-y) is the list of objects in $(obj-y) which uses dir/ to
	62	# tell kbuild to descend
	63	subdir-obj-y := $(filter %/built-in.o, $(obj-y))
	64
65	# $(obj-dirs) is a list of directories that contain object files
66	obj-dirs := $(dir $(multi-objs) $(obj-y))
67
68	# Replace multi-part objects by their individual parts, look at local dir only
69	real-objs-y := $(foreach m, $(filter-out $(subdir-obj-y), $(obj-y)), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))),$($(m:.o=-objs)) $($(m:.o=-y)),$(m))) $(extra-y)
70	real-objs-m := $(foreach m, $(obj-m), $(if $(strip $($(m:.o=-objs)) $($(m:.o=-y))),$($(m:.o=-objs)) $($(m:.o=-y)),$(m)))
71
72	# Add subdir path
73
74	extra-y := $(addprefix $(obj)/,$(extra-y))
75	always := $(addprefix $(obj)/,$(always))
76	targets := $(addprefix $(obj)/,$(targets))
77	modorder := $(addprefix $(obj)/,$(modorder))
78	obj-y := $(addprefix $(obj)/,$(obj-y))
79	obj-m := $(addprefix $(obj)/,$(obj-m))
80	lib-y := $(addprefix $(obj)/,$(lib-y))
81	subdir-obj-y := $(addprefix $(obj)/,$(subdir-obj-y))
82	real-objs-y := $(addprefix $(obj)/,$(real-objs-y))
83	real-objs-m := $(addprefix $(obj)/,$(real-objs-m))
84	single-used-m := $(addprefix $(obj)/,$(single-used-m))
85	multi-used-y := $(addprefix $(obj)/,$(multi-used-y))
86	multi-used-m := $(addprefix $(obj)/,$(multi-used-m))
87	multi-objs-y := $(addprefix $(obj)/,$(multi-objs-y))
88	multi-objs-m := $(addprefix $(obj)/,$(multi-objs-m))
89	subdir-ym := $(addprefix $(obj)/,$(subdir-ym))
90	obj-dirs := $(addprefix $(obj)/,$(obj-dirs))
91
92	# These flags are needed for modversions and compiling, so we define them here
93	# already
94	# $(modname_flags) #defines KBUILD_MODNAME as the name of the module it will
95	# end up in (or would, if it gets compiled in)
96	# Note: Files that end up in two or more modules are compiled without the
97	# KBUILD_MODNAME definition. The reason is that any made-up name would
98	# differ in different configs.
99	name-fix = $(subst $(comma),_,$(subst -,_,$1))
100	basename_flags = -D"KBUILD_BASENAME=KBUILD_STR($(call name-fix,$(basetarget)))"
101	modname_flags = $(if $(filter 1,$(words $(modname))),\
102	-D"KBUILD_MODNAME=KBUILD_STR($(call name-fix,$(modname)))")
103
6825a95b MY	104	# U-Boot also uses $(CPPFLAGS)
6825a95b MY	105	orig_c_flags = $(KBUILD_CPPFLAGS) $(CPPFLAGS) $(KBUILD_CFLAGS) $(KBUILD_SUBDIR_CCFLAGS) \
22433fc5 MY	106	$(ccflags-y) $(CFLAGS_$(basetarget).o)
22433fc5 MY	107	_c_flags = $(filter-out $(CFLAGS_REMOVE_$(basetarget).o), $(orig_c_flags))
6825a95b	108	_a_flags = $(KBUILD_CPPFLAGS) $(CPPFLAGS) $(KBUILD_AFLAGS) $(KBUILD_SUBDIR_ASFLAGS) \
22433fc5	109	$(asflags-y) $(AFLAGS_$(basetarget).o)
6825a95b	110	_cpp_flags = $(KBUILD_CPPFLAGS) $(CPPFLAGS) $(cppflags-y) $(CPPFLAGS_$(@F))
22433fc5 MY	111
	112	#
	113	# Enable gcov profiling flags for a file, directory or for all files depending
	114	# on variables GCOV_PROFILE_obj.o, GCOV_PROFILE and CONFIG_GCOV_PROFILE_ALL
	115	# (in this order)
	116	#
	117	ifeq ($(CONFIG_GCOV_KERNEL),y)
	118	_c_flags += $(if $(patsubst n%,, \
	119	$(GCOV_PROFILE_$(basetarget).o)$(GCOV_PROFILE)$(CONFIG_GCOV_PROFILE_ALL)), \
	120	$(CFLAGS_GCOV))
	121	endif
	122
	123	# If building the kernel in a separate objtree expand all occurrences
	124	# of -Idir to -I$(srctree)/dir except for absolute paths (starting with '/').
	125
	126	ifeq ($(KBUILD_SRC),)
	127	__c_flags = $(_c_flags)
	128	__a_flags = $(_a_flags)
	129	__cpp_flags = $(_cpp_flags)
	130	else
	131
	132	# -I$(obj) locates generated .h files
	133	# $(call addtree,-I$(obj)) locates .h files in srctree, from generated .c files
	134	# and locates generated .h files
	135	# FIXME: Replace both with specific CFLAGS* statements in the makefiles
	136	__c_flags = $(call addtree,-I$(obj)) $(call flags,_c_flags)
	137	__a_flags = $(call flags,_a_flags)
	138	__cpp_flags = $(call flags,_cpp_flags)
	139	endif
	140
6825a95b MY	141	# Modified for U-Boot: LINUXINCLUDE -> UBOOTINCLUDE
6825a95b MY	142	c_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(UBOOTINCLUDE) \
22433fc5 MY	143	$(__c_flags) $(modkern_cflags) \
	144	-D"KBUILD_STR(s)=\#s" $(basename_flags) $(modname_flags)
	145
6825a95b	146	a_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(UBOOTINCLUDE) \
22433fc5 MY	147	$(__a_flags) $(modkern_aflags)
22433fc5 MY	148
6825a95b	149	cpp_flags = -Wp,-MD,$(depfile) $(NOSTDINC_FLAGS) $(UBOOTINCLUDE) \
22433fc5 MY	150	$(__cpp_flags)
	151
	152	ld_flags = $(LDFLAGS) $(ldflags-y)
	153
6ab6b2af	154	# Modified for U-Boot
22433fc5	155	dtc_cpp_flags = -Wp,-MD,$(depfile).pre.tmp -nostdinc \
6ab6b2af	156	-I$(srctree)/arch/$(ARCH)/dts \
22433fc5 MY	157	-undef -D__DTS__
	158
	159	# Finds the multi-part object the current object will be linked into
	160	modname-multi = $(sort $(foreach m,$(multi-used),\
	161	$(if $(filter $(subst $(obj)/,,$*.o), $($(m:.o=-objs)) $($(m:.o=-y))),$(m:.o=))))
	162
	163	ifdef REGENERATE_PARSERS
	164
	165	# GPERF
	166	# ---------------------------------------------------------------------------
	167	quiet_cmd_gperf = GPERF $@
	168	cmd_gperf = gperf -t --output-file $@ -a -C -E -g -k 1,3,$$ -p -t $<
	169
	170	.PRECIOUS: $(src)/%.hash.c_shipped
	171	$(src)/%.hash.c_shipped: $(src)/%.gperf
	172	$(call cmd,gperf)
	173
	174	# LEX
	175	# ---------------------------------------------------------------------------
	176	LEX_PREFIX = $(if $(LEX_PREFIX_${baseprereq}),$(LEX_PREFIX_${baseprereq}),yy)
	177
	178	quiet_cmd_flex = LEX $@
	179	cmd_flex = flex -o$@ -L -P $(LEX_PREFIX) $<
	180
	181	.PRECIOUS: $(src)/%.lex.c_shipped
	182	$(src)/%.lex.c_shipped: $(src)/%.l
	183	$(call cmd,flex)
	184
	185	# YACC
	186	# ---------------------------------------------------------------------------
	187	YACC_PREFIX = $(if $(YACC_PREFIX_${baseprereq}),$(YACC_PREFIX_${baseprereq}),yy)
	188
	189	quiet_cmd_bison = YACC $@
	190	cmd_bison = bison -o$@ -t -l -p $(YACC_PREFIX) $<
	191
	192	.PRECIOUS: $(src)/%.tab.c_shipped
	193	$(src)/%.tab.c_shipped: $(src)/%.y
	194	$(call cmd,bison)
	195
	196	quiet_cmd_bison_h = YACC $@
	197	cmd_bison_h = bison -o/dev/null --defines=$@ -t -l -p $(YACC_PREFIX) $<
	198
	199	.PRECIOUS: $(src)/%.tab.h_shipped
	200	$(src)/%.tab.h_shipped: $(src)/%.y
	201	$(call cmd,bison_h)
	202
	203	endif
	204
	205	# Shipped files
	206	# ===========================================================================
	207
	208	quiet_cmd_shipped = SHIPPED $@
	209	cmd_shipped = cat $< > $@
	210
	211	$(obj)/%: $(src)/%_shipped
	212	$(call cmd,shipped)
	213
	214	# Commands useful for building a boot image
	215	# ===========================================================================
	216	#
	217	# Use as following:
	218	#
	219	# target: source(s) FORCE
	220	# $(if_changed,ld/objcopy/gzip)
221	#
222	# and add target to extra-y so that we know we have to
223	# read in the saved command line
224
225	# Linking
226	# ---------------------------------------------------------------------------
227
228	quiet_cmd_ld = LD $@
229	cmd_ld = $(LD) $(LDFLAGS) $(ldflags-y) $(LDFLAGS_$(@F)) \
230	$(filter-out FORCE,$^) -o $@
231
232	# Objcopy
233	# ---------------------------------------------------------------------------
234
235	quiet_cmd_objcopy = OBJCOPY $@
236	cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
237
238	# Gzip
239	# ---------------------------------------------------------------------------
240
241	quiet_cmd_gzip = GZIP $@
242	cmd_gzip = (cat $(filter-out FORCE,$^) \| gzip -n -f -9 > $@) \|\| \
243	(rm -f $@ ; false)
244
245	# DTC
246	# ---------------------------------------------------------------------------
247
248	# Generate an assembly file to wrap the output of the device tree compiler
249	quiet_cmd_dt_S_dtb= DTB $@
6ab6b2af	250	# Modified for U-Boot
22433fc5 MY	251	cmd_dt_S_dtb= \
22433fc5 MY	252	( \
22433fc5	253	echo '.section .dtb.init.rodata,"a"'; \
22433fc5 MY	254	echo '.global __dtb_$(*F)_begin'; \
	255	echo '__dtb_$(*F)_begin:'; \
	256	echo '.incbin "$<" '; \
	257	echo '__dtb_$(*F)_end:'; \
	258	echo '.global __dtb_$(*F)_end'; \
22433fc5 MY	259	) > $@
	260
	261	$(obj)/%.dtb.S: $(obj)/%.dtb
	262	$(call cmd,dt_S_dtb)
	263
	264	quiet_cmd_dtc = DTC $@
6ab6b2af	265	# Modified for U-Boot
22433fc5	266	cmd_dtc = $(CPP) $(dtc_cpp_flags) -x assembler-with-cpp -o $(dtc-tmp) $< ; \
6ab6b2af	267	dtc -O dtb -o $@ -b 0 \
22433fc5 MY	268	-i $(dir $<) $(DTC_FLAGS) \
	269	-d $(depfile).dtc.tmp $(dtc-tmp) ; \
	270	cat $(depfile).pre.tmp $(depfile).dtc.tmp > $(depfile)
	271
	272	$(obj)/%.dtb: $(src)/%.dts FORCE
	273	$(call if_changed_dep,dtc)
	274
	275	dtc-tmp = $(subst $(comma),_,$(dot-target).dts.tmp)
	276
	277	# Bzip2
	278	# ---------------------------------------------------------------------------
	279
	280	# Bzip2 and LZMA do not include size in file... so we have to fake that;
	281	# append the size as a 32-bit littleendian number as gzip does.
	282	size_append = printf $(shell \
	283	dec_size=0; \
	284	for F in $1; do \
	285	fsize=$$(stat -c "%s" $$F); \
	286	dec_size=$$(expr $$dec_size + $$fsize); \
	287	done; \
	288	printf "%08x\n" $$dec_size \| \
	289	sed 's/\(..\)/\1 /g' \| { \
	290	read ch0 ch1 ch2 ch3; \
	291	for ch in $$ch3 $$ch2 $$ch1 $$ch0; do \
	292	printf '%s%03o' '\\' $$((0x$$ch)); \
	293	done; \
	294	} \
	295	)
	296
	297	quiet_cmd_bzip2 = BZIP2 $@
	298	cmd_bzip2 = (cat $(filter-out FORCE,$^) \| \
	299	bzip2 -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ \|\| \
	300	(rm -f $@ ; false)
	301
	302	# Lzma
	303	# ---------------------------------------------------------------------------
	304
	305	quiet_cmd_lzma = LZMA $@
	306	cmd_lzma = (cat $(filter-out FORCE,$^) \| \
	307	lzma -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ \|\| \
	308	(rm -f $@ ; false)
	309
	310	quiet_cmd_lzo = LZO $@
	311	cmd_lzo = (cat $(filter-out FORCE,$^) \| \
	312	lzop -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ \|\| \
	313	(rm -f $@ ; false)
	314
	315	quiet_cmd_lz4 = LZ4 $@
	316	cmd_lz4 = (cat $(filter-out FORCE,$^) \| \
	317	lz4c -l -c1 stdin stdout && $(call size_append, $(filter-out FORCE,$^))) > $@ \|\| \
	318	(rm -f $@ ; false)
	319
	320	# U-Boot mkimage
	321	# ---------------------------------------------------------------------------
	322
	323	MKIMAGE := $(srctree)/scripts/mkuboot.sh
	324
	325	# SRCARCH just happens to match slightly more than ARCH (on sparc), so reduces
	326	# the number of overrides in arch makefiles
	327	UIMAGE_ARCH ?= $(SRCARCH)
	328	UIMAGE_COMPRESSION ?= $(if $(2),$(2),none)
	329	UIMAGE_OPTS-y ?=
	330	UIMAGE_TYPE ?= kernel
	331	UIMAGE_LOADADDR ?= arch_must_set_this
332	UIMAGE_ENTRYADDR ?= $(UIMAGE_LOADADDR)
333	UIMAGE_NAME ?= 'Linux-$(KERNELRELEASE)'
334	UIMAGE_IN ?= $<
335	UIMAGE_OUT ?= $@
336
337	quiet_cmd_uimage = UIMAGE $(UIMAGE_OUT)
338	cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A $(UIMAGE_ARCH) -O linux \
339	-C $(UIMAGE_COMPRESSION) $(UIMAGE_OPTS-y) \
340	-T $(UIMAGE_TYPE) \
341	-a $(UIMAGE_LOADADDR) -e $(UIMAGE_ENTRYADDR) \
342	-n $(UIMAGE_NAME) -d $(UIMAGE_IN) $(UIMAGE_OUT)
343
344	# XZ
345	# ---------------------------------------------------------------------------
346	# Use xzkern to compress the kernel image and xzmisc to compress other things.
347	#
348	# xzkern uses a big LZMA2 dictionary since it doesn't increase memory usage
349	# of the kernel decompressor. A BCJ filter is used if it is available for
350	# the target architecture. xzkern also appends uncompressed size of the data
351	# using size_append. The .xz format has the size information available at
352	# the end of the file too, but it's in more complex format and it's good to
353	# avoid changing the part of the boot code that reads the uncompressed size.
354	# Note that the bytes added by size_append will make the xz tool think that
355	# the file is corrupt. This is expected.
356	#
357	# xzmisc doesn't use size_append, so it can be used to create normal .xz
358	# files. xzmisc uses smaller LZMA2 dictionary than xzkern, because a very
359	# big dictionary would increase the memory usage too much in the multi-call
360	# decompression mode. A BCJ filter isn't used either.
361	quiet_cmd_xzkern = XZKERN $@
362	cmd_xzkern = (cat $(filter-out FORCE,$^) \| \
363	sh $(srctree)/scripts/xz_wrap.sh && \
364	$(call size_append, $(filter-out FORCE,$^))) > $@ \|\| \
365	(rm -f $@ ; false)
366
367	quiet_cmd_xzmisc = XZMISC $@
368	cmd_xzmisc = (cat $(filter-out FORCE,$^) \| \
369	xz --check=crc32 --lzma2=dict=1MiB) > $@ \|\| \
370	(rm -f $@ ; false)
371
372	# misc stuff
373	# ---------------------------------------------------------------------------
374	quote:="