[people/ms/u-boot.git] / scripts / Makefile.spl

#
# (C) Copyright 2000-2011
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# (C) Copyright 2011
# Daniel Schwierzeck, daniel.schwierzeck@googlemail.com.
#
# (C) Copyright 2011
# Texas Instruments Incorporated - http://www.ti.com/
# Aneesh V <aneesh@ti.com>
#
# SPDX-License-Identifier:	GPL-2.0+
#
# Based on top-level Makefile.
#

src := $(obj)

# Create output directory if not already present
_dummy := $(shell [ -d $(obj) ] || mkdir -p $(obj))

include $(srctree)/scripts/Kbuild.include

-include include/config/auto.conf
-include $(obj)/include/autoconf.mk

KBUILD_CPPFLAGS += -DCONFIG_SPL_BUILD
ifeq ($(CONFIG_TPL_BUILD),y)
KBUILD_CPPFLAGS += -DCONFIG_TPL_BUILD
endif

ifeq ($(CONFIG_TPL_BUILD),y)
SPL_BIN := u-boot-tpl
else
SPL_BIN := u-boot-spl
endif

include $(srctree)/config.mk
include $(srctree)/arch/$(ARCH)/Makefile

# Enable garbage collection of un-used sections for SPL
KBUILD_CFLAGS += -ffunction-sections -fdata-sections
LDFLAGS_FINAL += --gc-sections

# FIX ME
cpp_flags := $(KBUILD_CPPFLAGS) $(PLATFORM_CPPFLAGS) $(UBOOTINCLUDE) \
							$(NOSTDINC_FLAGS)

HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makefile),y,n)

libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/)
libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/

libs-$(CONFIG_SPL_FRAMEWORK) += common/spl/
libs-$(CONFIG_SPL_LIBCOMMON_SUPPORT) += common/
libs-$(CONFIG_SPL_LIBDISK_SUPPORT) += disk/
libs-$(CONFIG_SPL_DM) += drivers/core/
libs-$(CONFIG_SPL_I2C_SUPPORT) += drivers/i2c/
libs-$(CONFIG_SPL_GPIO_SUPPORT) += drivers/gpio/
libs-$(CONFIG_SPL_MMC_SUPPORT) += drivers/mmc/
libs-$(CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT) += drivers/ddr/fsl/
libs-$(CONFIG_SYS_MVEBU_DDR) += drivers/ddr/mvebu/
libs-$(CONFIG_SPL_SERIAL_SUPPORT) += drivers/serial/
libs-$(CONFIG_SPL_SPI_FLASH_SUPPORT) += drivers/mtd/spi/
libs-$(CONFIG_SPL_SPI_SUPPORT) += drivers/spi/
libs-y += fs/
libs-$(CONFIG_SPL_LIBGENERIC_SUPPORT) += lib/
libs-$(CONFIG_SPL_POWER_SUPPORT) += drivers/power/ drivers/power/pmic/
libs-$(CONFIG_SPL_MTD_SUPPORT) += drivers/mtd/
libs-$(CONFIG_SPL_NAND_SUPPORT) += drivers/mtd/nand/
libs-$(CONFIG_SPL_DRIVERS_MISC_SUPPORT) += drivers/misc/
libs-$(CONFIG_SPL_ONENAND_SUPPORT) += drivers/mtd/onenand/
libs-$(CONFIG_SPL_DMA_SUPPORT) += drivers/dma/
libs-$(CONFIG_SPL_POST_MEM_SUPPORT) += post/drivers/
libs-$(CONFIG_SPL_NET_SUPPORT) += net/
libs-$(CONFIG_SPL_ETH_SUPPORT) += drivers/net/
libs-$(CONFIG_SPL_ETH_SUPPORT) += drivers/net/phy/
libs-$(CONFIG_SPL_USBETH_SUPPORT) += drivers/net/phy/
libs-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += drivers/usb/musb-new/
libs-$(CONFIG_SPL_USBETH_SUPPORT) += drivers/usb/gadget/
libs-$(CONFIG_SPL_WATCHDOG_SUPPORT) += drivers/watchdog/
libs-$(CONFIG_SPL_USB_HOST_SUPPORT) += drivers/usb/host/
libs-$(CONFIG_OMAP_USB_PHY) += drivers/usb/phy/
libs-$(CONFIG_SPL_SATA_SUPPORT) += drivers/block/

head-y		:= $(addprefix $(obj)/,$(head-y))
libs-y		:= $(addprefix $(obj)/,$(libs-y))
u-boot-spl-dirs	:= $(patsubst %/,%,$(filter %/, $(libs-y)))

libs-y := $(patsubst %/, %/built-in.o, $(libs-y))

# Add GCC lib
ifeq ($(CONFIG_USE_PRIVATE_LIBGCC),y)
PLATFORM_LIBGCC = arch/$(ARCH)/lib/lib.a
PLATFORM_LIBS := $(filter-out %/lib.a, $(filter-out -lgcc, $(PLATFORM_LIBS))) $(PLATFORM_LIBGCC)
endif

u-boot-spl-init := $(head-y)
u-boot-spl-main := $(libs-y)

# Linker Script
ifdef CONFIG_SPL_LDSCRIPT
# need to strip off double quotes
LDSCRIPT := $(addprefix $(srctree)/,$(CONFIG_SPL_LDSCRIPT:"%"=%))
endif

ifeq ($(wildcard $(LDSCRIPT)),)
	LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot-spl.lds
endif
ifeq ($(wildcard $(LDSCRIPT)),)
	LDSCRIPT := $(srctree)/$(CPUDIR)/u-boot-spl.lds
endif
ifeq ($(wildcard $(LDSCRIPT)),)
	LDSCRIPT := $(srctree)/arch/$(ARCH)/cpu/u-boot-spl.lds
endif
ifeq ($(wildcard $(LDSCRIPT)),)
$(error could not find linker script)
endif

# Special flags for CPP when processing the linker script.
# Pass the version down so we can handle backwards compatibility
# on the fly.
LDPPFLAGS += \
	-include $(srctree)/include/u-boot/u-boot.lds.h \
	-include $(objtree)/include/config.h \
	-DCPUDIR=$(CPUDIR) \
	$(shell $(LD) --version | \
	  sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')

quiet_cmd_mkimage = MKIMAGE $@
cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
	$(if $(KBUILD_VERBOSE:1=), >/dev/null)

MKIMAGEFLAGS_MLO = -T omapimage -a $(CONFIG_SPL_TEXT_BASE)

MKIMAGEFLAGS_MLO.byteswap = -T omapimage -n byteswap -a $(CONFIG_SPL_TEXT_BASE)

MLO MLO.byteswap: $(obj)/u-boot-spl.bin
	$(call if_changed,mkimage)

MKIMAGEFLAGS_boot.bin = -T atmelimage

ifeq ($(CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER),y)
MKIMAGEFLAGS_boot.bin += -n $(shell $(obj)/../tools/atmel_pmecc_params)

boot.bin: $(obj)/../tools/atmel_pmecc_params
endif

boot.bin: $(obj)/u-boot-spl.bin
	$(call if_changed,mkimage)

ALL-y	+= $(obj)/$(SPL_BIN).bin $(obj)/$(SPL_BIN).cfg

ifdef CONFIG_SAMSUNG
ALL-y	+= $(obj)/$(BOARD)-spl.bin
endif

ifdef CONFIG_SUNXI
ALL-y	+= $(obj)/sunxi-spl.bin
endif

ifeq ($(CONFIG_SYS_SOC),"at91")
ALL-y	+= boot.bin
endif

all:	$(ALL-y)

quiet_cmd_cpp_cfg = CFG     $@
cmd_cpp_cfg = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) -ansi \
	-DDO_DEPS_ONLY -D__ASSEMBLY__ -x assembler-with-cpp -P -dM -E -o $@ $<

$(obj)/$(SPL_BIN).cfg:	include/config.h
	$(call if_changed,cpp_cfg)

ifdef CONFIG_SAMSUNG
ifdef CONFIG_VAR_SIZE_SPL
VAR_SIZE_PARAM = --vs
else
VAR_SIZE_PARAM =
endif
$(obj)/$(BOARD)-spl.bin: $(obj)/u-boot-spl.bin
	$(if $(wildcard $(objtree)/spl/board/samsung/$(BOARD)/tools/mk$(BOARD)spl),\
	$(objtree)/spl/board/samsung/$(BOARD)/tools/mk$(BOARD)spl,\
	$(objtree)/tools/mkexynosspl) $(VAR_SIZE_PARAM) $< $@
endif

quiet_cmd_objcopy = OBJCOPY $@
cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@

OBJCOPYFLAGS_$(SPL_BIN).bin = $(SPL_OBJCFLAGS) -O binary

$(obj)/$(SPL_BIN).bin: $(obj)/$(SPL_BIN) FORCE
	$(call if_changed,objcopy)

LDFLAGS_$(SPL_BIN) += -T u-boot-spl.lds $(LDFLAGS_FINAL)
ifneq ($(CONFIG_SPL_TEXT_BASE),)
LDFLAGS_$(SPL_BIN) += -Ttext $(CONFIG_SPL_TEXT_BASE)
endif

ifdef CONFIG_SUNXI
quiet_cmd_mksunxiboot = MKSUNXI $@
cmd_mksunxiboot = $(objtree)/tools/mksunxiboot $< $@
$(obj)/sunxi-spl.bin: $(obj)/$(SPL_BIN).bin
	$(call if_changed,mksunxiboot)
endif

quiet_cmd_u-boot-spl = LD      $@
      cmd_u-boot-spl = (cd $(obj) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) \
		       $(patsubst $(obj)/%,%,$(u-boot-spl-init)) --start-group \
		       $(patsubst $(obj)/%,%,$(u-boot-spl-main)) --end-group \
		       $(PLATFORM_LIBS) -Map $(SPL_BIN).map -o $(SPL_BIN))

$(obj)/$(SPL_BIN): $(u-boot-spl-init) $(u-boot-spl-main) $(obj)/u-boot-spl.lds FORCE
	$(call if_changed,u-boot-spl)

$(sort $(u-boot-spl-init) $(u-boot-spl-main)): $(u-boot-spl-dirs) ;

PHONY += $(u-boot-spl-dirs)
$(u-boot-spl-dirs):
	$(Q)$(MAKE) $(build)=$@

quiet_cmd_cpp_lds = LDS     $@
cmd_cpp_lds = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) -ansi \
		-D__ASSEMBLY__ -x assembler-with-cpp -P -o $@ $<

$(obj)/u-boot-spl.lds: $(LDSCRIPT) FORCE
	$(call if_changed_dep,cpp_lds)

# read all saved command lines

targets := $(wildcard $(sort $(targets)))
cmd_files := $(wildcard $(obj)/.*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))

ifneq ($(cmd_files),)
  $(cmd_files): ;	# Do not try to update included dependency files
  include $(cmd_files)
endif

PHONY += FORCE
FORCE:

# Declare the contents of the .PHONY variable as phony.  We keep that
# information in a variable so we can use it in if_changed and friends.
.PHONY: $(PHONY)
Commit	Line	Data
6a11cf48 DS	1	#
	2	# (C) Copyright 2000-2011
	3	# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
	4	#
	5	# (C) Copyright 2011
	6	# Daniel Schwierzeck, daniel.schwierzeck@googlemail.com.
	7	#
	8	# (C) Copyright 2011
	9	# Texas Instruments Incorporated - http://www.ti.com/
	10	# Aneesh V <aneesh@ti.com>
	11	#
1a459660	12	# SPDX-License-Identifier: GPL-2.0+
6a11cf48 DS	13	#
	14	# Based on top-level Makefile.
	15	#
	16
9e414032 MY	17	src := $(obj)
	18
	19	# Create output directory if not already present
	20	_dummy := $(shell [ -d $(obj) ] \|\| mkdir -p $(obj))
	21
bf4b3de1 MY	22	include $(srctree)/scripts/Kbuild.include
bf4b3de1 MY	23
e02ee254	24	-include include/config/auto.conf
51148790	25	-include $(obj)/include/autoconf.mk
e0d5d9f8	26
e02ee254 MY	27	KBUILD_CPPFLAGS += -DCONFIG_SPL_BUILD
	28	ifeq ($(CONFIG_TPL_BUILD),y)
	29	KBUILD_CPPFLAGS += -DCONFIG_TPL_BUILD
	30	endif
	31
3aa29de0	32	ifeq ($(CONFIG_TPL_BUILD),y)
3aa29de0 YZ	33	SPL_BIN := u-boot-tpl
	34	else
	35	SPL_BIN := u-boot-spl
	36	endif
	37
4379ac61	38	include $(srctree)/config.mk
e19db555	39	include $(srctree)/arch/$(ARCH)/Makefile
6a11cf48	40
026f9cf2 MY	41	# Enable garbage collection of un-used sections for SPL
	42	KBUILD_CFLAGS += -ffunction-sections -fdata-sections
	43	LDFLAGS_FINAL += --gc-sections
	44
5fe6301a	45	# FIX ME
026f9cf2 MY	46	cpp_flags := $(KBUILD_CPPFLAGS) $(PLATFORM_CPPFLAGS) $(UBOOTINCLUDE) \
026f9cf2 MY	47	$(NOSTDINC_FLAGS)
5fe6301a	48
01286329	49	HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makefile),y,n)
6a11cf48	50
bf69d664	51	libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/)
656de6b8 MY	52	libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/
	53
	54	libs-$(CONFIG_SPL_FRAMEWORK) += common/spl/
	55	libs-$(CONFIG_SPL_LIBCOMMON_SUPPORT) += common/
	56	libs-$(CONFIG_SPL_LIBDISK_SUPPORT) += disk/
11516518	57	libs-$(CONFIG_SPL_DM) += drivers/core/
656de6b8 MY	58	libs-$(CONFIG_SPL_I2C_SUPPORT) += drivers/i2c/
	59	libs-$(CONFIG_SPL_GPIO_SUPPORT) += drivers/gpio/
	60	libs-$(CONFIG_SPL_MMC_SUPPORT) += drivers/mmc/
	61	libs-$(CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT) += drivers/ddr/fsl/
0cf47862	62	libs-$(CONFIG_SYS_MVEBU_DDR) += drivers/ddr/mvebu/
656de6b8 MY	63	libs-$(CONFIG_SPL_SERIAL_SUPPORT) += drivers/serial/
	64	libs-$(CONFIG_SPL_SPI_FLASH_SUPPORT) += drivers/mtd/spi/
	65	libs-$(CONFIG_SPL_SPI_SUPPORT) += drivers/spi/
	66	libs-y += fs/
	67	libs-$(CONFIG_SPL_LIBGENERIC_SUPPORT) += lib/
	68	libs-$(CONFIG_SPL_POWER_SUPPORT) += drivers/power/ drivers/power/pmic/
6dd3b566	69	libs-$(CONFIG_SPL_MTD_SUPPORT) += drivers/mtd/
167544e8	70	libs-$(CONFIG_SPL_NAND_SUPPORT) += drivers/mtd/nand/
656de6b8 MY	71	libs-$(CONFIG_SPL_DRIVERS_MISC_SUPPORT) += drivers/misc/
	72	libs-$(CONFIG_SPL_ONENAND_SUPPORT) += drivers/mtd/onenand/
	73	libs-$(CONFIG_SPL_DMA_SUPPORT) += drivers/dma/
	74	libs-$(CONFIG_SPL_POST_MEM_SUPPORT) += post/drivers/
	75	libs-$(CONFIG_SPL_NET_SUPPORT) += net/
	76	libs-$(CONFIG_SPL_ETH_SUPPORT) += drivers/net/
	77	libs-$(CONFIG_SPL_ETH_SUPPORT) += drivers/net/phy/
	78	libs-$(CONFIG_SPL_USBETH_SUPPORT) += drivers/net/phy/
	79	libs-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += drivers/usb/musb-new/
	80	libs-$(CONFIG_SPL_USBETH_SUPPORT) += drivers/usb/gadget/
	81	libs-$(CONFIG_SPL_WATCHDOG_SUPPORT) += drivers/watchdog/
	82	libs-$(CONFIG_SPL_USB_HOST_SUPPORT) += drivers/usb/host/
	83	libs-$(CONFIG_OMAP_USB_PHY) += drivers/usb/phy/
	84	libs-$(CONFIG_SPL_SATA_SUPPORT) += drivers/block/
efcc6096	85
656de6b8 MY	86	head-y := $(addprefix $(obj)/,$(head-y))
	87	libs-y := $(addprefix $(obj)/,$(libs-y))
	88	u-boot-spl-dirs := $(patsubst %/,%,$(filter %/, $(libs-y)))
	89
	90	libs-y := $(patsubst %/, %/built-in.o, $(libs-y))
e2906a59	91
660e98f2	92	# Add GCC lib
cd2e46cb	93	ifeq ($(CONFIG_USE_PRIVATE_LIBGCC),y)
a86cf89c	94	PLATFORM_LIBGCC = arch/$(ARCH)/lib/lib.a
6445262c	95	PLATFORM_LIBS := $(filter-out %/lib.a, $(filter-out -lgcc, $(PLATFORM_LIBS))) $(PLATFORM_LIBGCC)
660e98f2 AM	96	endif
660e98f2 AM	97
656de6b8 MY	98	u-boot-spl-init := $(head-y)
656de6b8 MY	99	u-boot-spl-main := $(libs-y)
6a11cf48 DS	100
	101	# Linker Script
	102	ifdef CONFIG_SPL_LDSCRIPT
	103	# need to strip off double quotes
01286329	104	LDSCRIPT := $(addprefix $(srctree)/,$(CONFIG_SPL_LDSCRIPT:"%"=%))
6a11cf48 DS	105	endif
	106
	107	ifeq ($(wildcard $(LDSCRIPT)),)
4379ac61	108	LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot-spl.lds
6a11cf48 DS	109	endif
6a11cf48 DS	110	ifeq ($(wildcard $(LDSCRIPT)),)
4379ac61	111	LDSCRIPT := $(srctree)/$(CPUDIR)/u-boot-spl.lds
6a11cf48	112	endif
ee60197e	113	ifeq ($(wildcard $(LDSCRIPT)),)
4379ac61	114	LDSCRIPT := $(srctree)/arch/$(ARCH)/cpu/u-boot-spl.lds
ee60197e	115	endif
6a11cf48 DS	116	ifeq ($(wildcard $(LDSCRIPT)),)
	117	$(error could not find linker script)
	118	endif
	119
	120	# Special flags for CPP when processing the linker script.
	121	# Pass the version down so we can handle backwards compatibility
	122	# on the fly.
	123	LDPPFLAGS += \
4379ac61	124	-include $(srctree)/include/u-boot/u-boot.lds.h \
5ee828ca	125	-include $(objtree)/include/config.h \
7e6403a6	126	-DCPUDIR=$(CPUDIR) \
6a11cf48 DS	127	$(shell $(LD) --version \| \
	128	sed -ne 's/GNU ld version \([0-9][0-9]\)\.\([0-9][0-9]\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
	129
b97241b3	130	quiet_cmd_mkimage = MKIMAGE $@
9bf215b0 MY	131	cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
9bf215b0 MY	132	$(if $(KBUILD_VERBOSE:1=), >/dev/null)
79b9ebb7	133
9bf215b0 MY	134	MKIMAGEFLAGS_MLO = -T omapimage -a $(CONFIG_SPL_TEXT_BASE)
	135
	136	MKIMAGEFLAGS_MLO.byteswap = -T omapimage -n byteswap -a $(CONFIG_SPL_TEXT_BASE)
	137
	138	MLO MLO.byteswap: $(obj)/u-boot-spl.bin
	139	$(call if_changed,mkimage)
3decb14a	140
5c390a5b AB	141	MKIMAGEFLAGS_boot.bin = -T atmelimage
	142
	143	ifeq ($(CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER),y)
	144	MKIMAGEFLAGS_boot.bin += -n $(shell $(obj)/../tools/atmel_pmecc_params)
	145
	146	boot.bin: $(obj)/../tools/atmel_pmecc_params
	147	endif
	148
	149	boot.bin: $(obj)/u-boot-spl.bin
	150	$(call if_changed,mkimage)
	151
741e58e0	152	ALL-y += $(obj)/$(SPL_BIN).bin $(obj)/$(SPL_BIN).cfg
6a11cf48	153
98a48c5d	154	ifdef CONFIG_SAMSUNG
9e414032	155	ALL-y += $(obj)/$(BOARD)-spl.bin
98a48c5d CK	156	endif
98a48c5d CK	157
50827a59	158	ifdef CONFIG_SUNXI
50827a59 IC	159	ALL-y += $(obj)/sunxi-spl.bin
50827a59 IC	160	endif
50827a59	161
c001486d HS	162	ifeq ($(CONFIG_SYS_SOC),"at91")
	163	ALL-y += boot.bin
	164	endif
	165
6a11cf48 DS	166	all: $(ALL-y)
6a11cf48 DS	167
741e58e0 SG	168	quiet_cmd_cpp_cfg = CFG $@
741e58e0 SG	169	cmd_cpp_cfg = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) -ansi \
3113471f	170	-DDO_DEPS_ONLY -D__ASSEMBLY__ -x assembler-with-cpp -P -dM -E -o $@ $<
741e58e0 SG	171
	172	$(obj)/$(SPL_BIN).cfg: include/config.h
	173	$(call if_changed,cpp_cfg)
	174
98a48c5d	175	ifdef CONFIG_SAMSUNG
0fcac1ab RS	176	ifdef CONFIG_VAR_SIZE_SPL
	177	VAR_SIZE_PARAM = --vs
	178	else
	179	VAR_SIZE_PARAM =
	180	endif
9e414032	181	$(obj)/$(BOARD)-spl.bin: $(obj)/u-boot-spl.bin
5ee828ca MY	182	$(if $(wildcard $(objtree)/spl/board/samsung/$(BOARD)/tools/mk$(BOARD)spl),\
	183	$(objtree)/spl/board/samsung/$(BOARD)/tools/mk$(BOARD)spl,\
	184	$(objtree)/tools/mkexynosspl) $(VAR_SIZE_PARAM) $< $@
98a48c5d CK	185	endif
98a48c5d CK	186
f9c235fd MY	187	quiet_cmd_objcopy = OBJCOPY $@
	188	cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
	189
	190	OBJCOPYFLAGS_$(SPL_BIN).bin = $(SPL_OBJCFLAGS) -O binary
	191
	192	$(obj)/$(SPL_BIN).bin: $(obj)/$(SPL_BIN) FORCE
	193	$(call if_changed,objcopy)
6a11cf48	194
9e414032	195	LDFLAGS_$(SPL_BIN) += -T u-boot-spl.lds $(LDFLAGS_FINAL)
e0d5d9f8 MY	196	ifneq ($(CONFIG_SPL_TEXT_BASE),)
	197	LDFLAGS_$(SPL_BIN) += -Ttext $(CONFIG_SPL_TEXT_BASE)
	198	endif
	199
50827a59 IC	200	ifdef CONFIG_SUNXI
	201	quiet_cmd_mksunxiboot = MKSUNXI $@
	202	cmd_mksunxiboot = $(objtree)/tools/mksunxiboot $< $@
	203	$(obj)/sunxi-spl.bin: $(obj)/$(SPL_BIN).bin
	204	$(call if_changed,mksunxiboot)
	205	endif
	206
656de6b8	207	quiet_cmd_u-boot-spl = LD $@
9adb6d24	208	cmd_u-boot-spl = (cd $(obj) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) \
656de6b8 MY	209	$(patsubst $(obj)/%,%,$(u-boot-spl-init)) --start-group \
656de6b8 MY	210	$(patsubst $(obj)/%,%,$(u-boot-spl-main)) --end-group \
9adb6d24	211	$(PLATFORM_LIBS) -Map $(SPL_BIN).map -o $(SPL_BIN))
6a11cf48	212
9adb6d24 MY	213	$(obj)/$(SPL_BIN): $(u-boot-spl-init) $(u-boot-spl-main) $(obj)/u-boot-spl.lds FORCE
9adb6d24 MY	214	$(call if_changed,u-boot-spl)
6a11cf48	215
656de6b8	216	$(sort $(u-boot-spl-init) $(u-boot-spl-main)): $(u-boot-spl-dirs) ;
6a11cf48	217
656de6b8 MY	218	PHONY += $(u-boot-spl-dirs)
	219	$(u-boot-spl-dirs):
	220	$(Q)$(MAKE) $(build)=$@
6a11cf48	221
04a34c96	222	quiet_cmd_cpp_lds = LDS $@
395e60cd MY	223	cmd_cpp_lds = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) -ansi \
395e60cd MY	224	-D__ASSEMBLY__ -x assembler-with-cpp -P -o $@ $<
04a34c96	225
6825a95b	226	$(obj)/u-boot-spl.lds: $(LDSCRIPT) FORCE
395e60cd	227	$(call if_changed_dep,cpp_lds)
6a11cf48	228
f9c235fd MY	229	# read all saved command lines
	230
	231	targets := $(wildcard $(sort $(targets)))
	232	cmd_files := $(wildcard $(obj)/.*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
	233
	234	ifneq ($(cmd_files),)
	235	$(cmd_files): ; # Do not try to update included dependency files
	236	include $(cmd_files)
	237	endif
	238
6825a95b MY	239	PHONY += FORCE
	240	FORCE:
	241
	242	# Declare the contents of the .PHONY variable as phony. We keep that
	243	# information in a variable so we can use it in if_changed and friends.
	244	.PHONY: $(PHONY)