| | 1 | # |
| | 2 | # (C) Copyright 2000-2010 |
| | 3 | # Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| | 4 | # |
| | 5 | # See file CREDITS for list of people who contributed to this |
| | 6 | # project. |
| | 7 | # |
| | 8 | # This program is free software; you can redistribute it and/or |
| | 9 | # modify it under the terms of the GNU General Public License as |
| | 10 | # published by the Free Software Foundatio; either version 2 of |
| | 11 | # the License, or (at your option) any later version. |
| | 12 | # |
| | 13 | # This program is distributed in the hope that it will be useful, |
| | 14 | # but WITHOUT ANY WARRANTY; without even the implied warranty of |
| | 15 | # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| | 16 | # GNU General Public License for more details. |
| | 17 | # |
| | 18 | # You should have received a copy of the GNU General Public License |
| | 19 | # along with this program; if not, write to the Free Software |
| | 20 | # Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| | 21 | # MA 02111-1307 USA |
| | 22 | # |
| | 23 | |
| | 24 | VERSION = 2010 |
| | 25 | PATCHLEVEL = 12 |
| | 26 | SUBLEVEL = |
| | 27 | EXTRAVERSION = -rc2 |
| | 28 | ifneq "$(SUBLEVEL)" "" |
| | 29 | U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) |
| | 30 | else |
| | 31 | U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL)$(EXTRAVERSION) |
| | 32 | endif |
| | 33 | TIMESTAMP_FILE = $(obj)include/timestamp_autogenerated.h |
| | 34 | VERSION_FILE = $(obj)include/version_autogenerated.h |
| | 35 | |
| | 36 | HOSTARCH := $(shell uname -m | \ |
| | 37 | sed -e s/i.86/i386/ \ |
| | 38 | -e s/sun4u/sparc64/ \ |
| | 39 | -e s/arm.*/arm/ \ |
| | 40 | -e s/sa110/arm/ \ |
| | 41 | -e s/ppc64/powerpc/ \ |
| | 42 | -e s/ppc/powerpc/ \ |
| | 43 | -e s/macppc/powerpc/\ |
| | 44 | -e s/sh.*/sh/) |
| | 45 | |
| | 46 | HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \ |
| | 47 | sed -e 's/\(cygwin\).*/cygwin/') |
| | 48 | |
| | 49 | # Set shell to bash if possible, otherwise fall back to sh |
| | 50 | SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \ |
| | 51 | else if [ -x /bin/bash ]; then echo /bin/bash; \ |
| | 52 | else echo sh; fi; fi) |
| | 53 | |
| | 54 | export HOSTARCH HOSTOS SHELL |
| | 55 | |
| | 56 | # Deal with colliding definitions from tcsh etc. |
| | 57 | VENDOR= |
| | 58 | |
| | 59 | ######################################################################### |
| | 60 | # Allow for silent builds |
| | 61 | ifeq (,$(findstring s,$(MAKEFLAGS))) |
| | 62 | XECHO = echo |
| | 63 | else |
| | 64 | XECHO = : |
| | 65 | endif |
| | 66 | |
| | 67 | ######################################################################### |
| | 68 | # |
| | 69 | # U-boot build supports producing a object files to the separate external |
| | 70 | # directory. Two use cases are supported: |
| | 71 | # |
| | 72 | # 1) Add O= to the make command line |
| | 73 | # 'make O=/tmp/build all' |
| | 74 | # |
| | 75 | # 2) Set environement variable BUILD_DIR to point to the desired location |
| | 76 | # 'export BUILD_DIR=/tmp/build' |
| | 77 | # 'make' |
| | 78 | # |
| | 79 | # The second approach can also be used with a MAKEALL script |
| | 80 | # 'export BUILD_DIR=/tmp/build' |
| | 81 | # './MAKEALL' |
| | 82 | # |
| | 83 | # Command line 'O=' setting overrides BUILD_DIR environent variable. |
| | 84 | # |
| | 85 | # When none of the above methods is used the local build is performed and |
| | 86 | # the object files are placed in the source directory. |
| | 87 | # |
| | 88 | |
| | 89 | ifdef O |
| | 90 | ifeq ("$(origin O)", "command line") |
| | 91 | BUILD_DIR := $(O) |
| | 92 | endif |
| | 93 | endif |
| | 94 | |
| | 95 | ifneq ($(BUILD_DIR),) |
| | 96 | saved-output := $(BUILD_DIR) |
| | 97 | |
| | 98 | # Attempt to create a output directory. |
| | 99 | $(shell [ -d ${BUILD_DIR} ] || mkdir -p ${BUILD_DIR}) |
| | 100 | |
| | 101 | # Verify if it was successful. |
| | 102 | BUILD_DIR := $(shell cd $(BUILD_DIR) && /bin/pwd) |
| | 103 | $(if $(BUILD_DIR),,$(error output directory "$(saved-output)" does not exist)) |
| | 104 | endif # ifneq ($(BUILD_DIR),) |
| | 105 | |
| | 106 | OBJTREE := $(if $(BUILD_DIR),$(BUILD_DIR),$(CURDIR)) |
| | 107 | SRCTREE := $(CURDIR) |
| | 108 | TOPDIR := $(SRCTREE) |
| | 109 | LNDIR := $(OBJTREE) |
| | 110 | export TOPDIR SRCTREE OBJTREE |
| | 111 | |
| | 112 | MKCONFIG := $(SRCTREE)/mkconfig |
| | 113 | export MKCONFIG |
| | 114 | |
| | 115 | ifneq ($(OBJTREE),$(SRCTREE)) |
| | 116 | REMOTE_BUILD := 1 |
| | 117 | export REMOTE_BUILD |
| | 118 | endif |
| | 119 | |
| | 120 | # $(obj) and (src) are defined in config.mk but here in main Makefile |
| | 121 | # we also need them before config.mk is included which is the case for |
| | 122 | # some targets like unconfig, clean, clobber, distclean, etc. |
| | 123 | ifneq ($(OBJTREE),$(SRCTREE)) |
| | 124 | obj := $(OBJTREE)/ |
| | 125 | src := $(SRCTREE)/ |
| | 126 | else |
| | 127 | obj := |
| | 128 | src := |
| | 129 | endif |
| | 130 | export obj src |
| | 131 | |
| | 132 | # Make sure CDPATH settings don't interfere |
| | 133 | unexport CDPATH |
| | 134 | |
| | 135 | ######################################################################### |
| | 136 | |
| | 137 | # The "tools" are needed early, so put this first |
| | 138 | # Don't include stuff already done in $(LIBS) |
| | 139 | SUBDIRS = tools \ |
| | 140 | examples/standalone \ |
| | 141 | examples/api |
| | 142 | |
| | 143 | .PHONY : $(SUBDIRS) |
| | 144 | |
| | 145 | ifeq ($(obj)include/config.mk,$(wildcard $(obj)include/config.mk)) |
| | 146 | |
| | 147 | # Include autoconf.mk before config.mk so that the config options are available |
| | 148 | # to all top level build files. We need the dummy all: target to prevent the |
| | 149 | # dependency target in autoconf.mk.dep from being the default. |
| | 150 | all: |
| | 151 | sinclude $(obj)include/autoconf.mk.dep |
| | 152 | sinclude $(obj)include/autoconf.mk |
| | 153 | |
| | 154 | # load ARCH, BOARD, and CPU configuration |
| | 155 | include $(obj)include/config.mk |
| | 156 | export ARCH CPU BOARD VENDOR SOC |
| | 157 | |
| | 158 | # set default to nothing for native builds |
| | 159 | ifeq ($(HOSTARCH),$(ARCH)) |
| | 160 | CROSS_COMPILE ?= |
| | 161 | endif |
| | 162 | |
| | 163 | # load other configuration |
| | 164 | include $(TOPDIR)/config.mk |
| | 165 | |
| | 166 | ######################################################################### |
| | 167 | # U-Boot objects....order is important (i.e. start must be first) |
| | 168 | |
| | 169 | OBJS = $(CPUDIR)/start.o |
| | 170 | ifeq ($(CPU),i386) |
| | 171 | OBJS += $(CPUDIR)/start16.o |
| | 172 | OBJS += $(CPUDIR)/resetvec.o |
| | 173 | endif |
| | 174 | ifeq ($(CPU),ppc4xx) |
| | 175 | OBJS += $(CPUDIR)/resetvec.o |
| | 176 | endif |
| | 177 | ifeq ($(CPU),mpc85xx) |
| | 178 | OBJS += $(CPUDIR)/resetvec.o |
| | 179 | endif |
| | 180 | |
| | 181 | OBJS := $(addprefix $(obj),$(OBJS)) |
| | 182 | |
| | 183 | LIBS = lib/libgeneric.o |
| | 184 | LIBS += lib/lzma/liblzma.o |
| | 185 | LIBS += lib/lzo/liblzo.o |
| | 186 | LIBS += $(shell if [ -f board/$(VENDOR)/common/Makefile ]; then echo \ |
| | 187 | "board/$(VENDOR)/common/lib$(VENDOR).o"; fi) |
| | 188 | LIBS += $(CPUDIR)/lib$(CPU).o |
| | 189 | ifdef SOC |
| | 190 | LIBS += $(CPUDIR)/$(SOC)/lib$(SOC).o |
| | 191 | endif |
| | 192 | ifeq ($(CPU),ixp) |
| | 193 | LIBS += arch/arm/cpu/ixp/npe/libnpe.o |
| | 194 | endif |
| | 195 | LIBS += arch/$(ARCH)/lib/lib$(ARCH).o |
| | 196 | LIBS += fs/cramfs/libcramfs.o fs/fat/libfat.o fs/fdos/libfdos.o fs/jffs2/libjffs2.o \ |
| | 197 | fs/reiserfs/libreiserfs.o fs/ext2/libext2fs.o fs/yaffs2/libyaffs2.o \ |
| | 198 | fs/ubifs/libubifs.o |
| | 199 | LIBS += net/libnet.o |
| | 200 | LIBS += disk/libdisk.o |
| | 201 | LIBS += drivers/bios_emulator/libatibiosemu.o |
| | 202 | LIBS += drivers/block/libblock.o |
| | 203 | LIBS += drivers/dma/libdma.o |
| | 204 | LIBS += drivers/fpga/libfpga.o |
| | 205 | LIBS += drivers/gpio/libgpio.o |
| | 206 | LIBS += drivers/hwmon/libhwmon.o |
| | 207 | LIBS += drivers/i2c/libi2c.o |
| | 208 | LIBS += drivers/input/libinput.o |
| | 209 | LIBS += drivers/misc/libmisc.o |
| | 210 | LIBS += drivers/mmc/libmmc.o |
| | 211 | LIBS += drivers/mtd/libmtd.o |
| | 212 | LIBS += drivers/mtd/nand/libnand.o |
| | 213 | LIBS += drivers/mtd/onenand/libonenand.o |
| | 214 | LIBS += drivers/mtd/ubi/libubi.o |
| | 215 | LIBS += drivers/mtd/spi/libspi_flash.o |
| | 216 | LIBS += drivers/net/libnet.o |
| | 217 | LIBS += drivers/net/phy/libphy.o |
| | 218 | LIBS += drivers/pci/libpci.o |
| | 219 | LIBS += drivers/pcmcia/libpcmcia.o |
| | 220 | LIBS += drivers/power/libpower.o |
| | 221 | LIBS += drivers/spi/libspi.o |
| | 222 | ifeq ($(CPU),mpc83xx) |
| | 223 | LIBS += drivers/qe/libqe.o |
| | 224 | LIBS += arch/powerpc/cpu/mpc8xxx/lib8xxx.o |
| | 225 | endif |
| | 226 | ifeq ($(CPU),mpc85xx) |
| | 227 | LIBS += drivers/qe/libqe.o |
| | 228 | LIBS += arch/powerpc/cpu/mpc8xxx/ddr/libddr.o |
| | 229 | LIBS += arch/powerpc/cpu/mpc8xxx/lib8xxx.o |
| | 230 | endif |
| | 231 | ifeq ($(CPU),mpc86xx) |
| | 232 | LIBS += arch/powerpc/cpu/mpc8xxx/ddr/libddr.o |
| | 233 | LIBS += arch/powerpc/cpu/mpc8xxx/lib8xxx.o |
| | 234 | endif |
| | 235 | LIBS += drivers/rtc/librtc.o |
| | 236 | LIBS += drivers/serial/libserial.o |
| | 237 | LIBS += drivers/twserial/libtws.o |
| | 238 | LIBS += drivers/usb/gadget/libusb_gadget.o |
| | 239 | LIBS += drivers/usb/host/libusb_host.o |
| | 240 | LIBS += drivers/usb/musb/libusb_musb.o |
| | 241 | LIBS += drivers/usb/phy/libusb_phy.o |
| | 242 | LIBS += drivers/video/libvideo.o |
| | 243 | LIBS += drivers/watchdog/libwatchdog.o |
| | 244 | LIBS += common/libcommon.o |
| | 245 | LIBS += lib/libfdt/libfdt.o |
| | 246 | LIBS += api/libapi.o |
| | 247 | LIBS += post/libpost.o |
| | 248 | |
| | 249 | ifeq ($(SOC),omap3) |
| | 250 | LIBS += $(CPUDIR)/omap-common/libomap-common.o |
| | 251 | endif |
| | 252 | ifeq ($(SOC),omap4) |
| | 253 | LIBS += $(CPUDIR)/omap-common/libomap-common.o |
| | 254 | endif |
| | 255 | |
| | 256 | ifeq ($(SOC),s5pc1xx) |
| | 257 | LIBS += $(CPUDIR)/s5p-common/libs5p-common.o |
| | 258 | endif |
| | 259 | ifeq ($(SOC),s5pc2xx) |
| | 260 | LIBS += $(CPUDIR)/s5p-common/libs5p-common.o |
| | 261 | endif |
| | 262 | |
| | 263 | LIBS := $(addprefix $(obj),$(sort $(LIBS))) |
| | 264 | .PHONY : $(LIBS) $(TIMESTAMP_FILE) $(VERSION_FILE) |
| | 265 | |
| | 266 | LIBBOARD = board/$(BOARDDIR)/lib$(BOARD).o |
| | 267 | LIBBOARD := $(addprefix $(obj),$(LIBBOARD)) |
| | 268 | |
| | 269 | # Add GCC lib |
| | 270 | ifdef USE_PRIVATE_LIBGCC |
| | 271 | ifeq ("$(USE_PRIVATE_LIBGCC)", "yes") |
| | 272 | PLATFORM_LIBGCC = $(OBJTREE)/arch/$(ARCH)/lib/libgcc.o |
| | 273 | else |
| | 274 | PLATFORM_LIBGCC = -L $(USE_PRIVATE_LIBGCC) -lgcc |
| | 275 | endif |
| | 276 | else |
| | 277 | PLATFORM_LIBGCC = -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc |
| | 278 | endif |
| | 279 | PLATFORM_LIBS += $(PLATFORM_LIBGCC) |
| | 280 | export PLATFORM_LIBS |
| | 281 | |
| | 282 | # Special flags for CPP when processing the linker script. |
| | 283 | # Pass the version down so we can handle backwards compatibility |
| | 284 | # on the fly. |
| | 285 | LDPPFLAGS += \ |
| | 286 | -include $(TOPDIR)/include/u-boot/u-boot.lds.h \ |
| | 287 | $(shell $(LD) --version | \ |
| | 288 | sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p') |
| | 289 | |
| | 290 | ifeq ($(CONFIG_NAND_U_BOOT),y) |
| | 291 | NAND_SPL = nand_spl |
| | 292 | U_BOOT_NAND = $(obj)u-boot-nand.bin |
| | 293 | endif |
| | 294 | |
| | 295 | ifeq ($(CONFIG_ONENAND_U_BOOT),y) |
| | 296 | ONENAND_IPL = onenand_ipl |
| | 297 | U_BOOT_ONENAND = $(obj)u-boot-onenand.bin |
| | 298 | ONENAND_BIN ?= $(obj)onenand_ipl/onenand-ipl-2k.bin |
| | 299 | endif |
| | 300 | |
| | 301 | __OBJS := $(subst $(obj),,$(OBJS)) |
| | 302 | __LIBS := $(subst $(obj),,$(LIBS)) $(subst $(obj),,$(LIBBOARD)) |
| | 303 | |
| | 304 | ######################################################################### |
| | 305 | ######################################################################### |
| | 306 | |
| | 307 | ifneq ($(CONFIG_BOARD_SIZE_LIMIT),) |
| | 308 | BOARD_SIZE_CHECK = \ |
| | 309 | @actual=`wc -c $@ | awk '{print $$1}'`; \ |
| | 310 | limit=$(CONFIG_BOARD_SIZE_LIMIT); \ |
| | 311 | if test $$actual -gt $$limit; then \ |
| | 312 | echo "$@ exceeds file size limit:"; \ |
| | 313 | echo " limit: $$limit bytes"; \ |
| | 314 | echo " actual: $$actual bytes"; \ |
| | 315 | echo " excess: $$((actual - limit)) bytes"; \ |
| | 316 | exit 1; \ |
| | 317 | fi |
| | 318 | else |
| | 319 | BOARD_SIZE_CHECK = |
| | 320 | endif |
| | 321 | |
| | 322 | # Always append ALL so that arch config.mk's can add custom ones |
| | 323 | ALL += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map $(U_BOOT_NAND) $(U_BOOT_ONENAND) |
| | 324 | |
| | 325 | all: $(ALL) |
| | 326 | |
| | 327 | $(obj)u-boot.hex: $(obj)u-boot |
| | 328 | $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@ |
| | 329 | |
| | 330 | $(obj)u-boot.srec: $(obj)u-boot |
| | 331 | $(OBJCOPY) -O srec $< $@ |
| | 332 | |
| | 333 | $(obj)u-boot.bin: $(obj)u-boot |
| | 334 | $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@ |
| | 335 | $(BOARD_SIZE_CHECK) |
| | 336 | |
| | 337 | $(obj)u-boot.ldr: $(obj)u-boot |
| | 338 | $(CREATE_LDR_ENV) |
| | 339 | $(LDR) -T $(CONFIG_BFIN_CPU) -c $@ $< $(LDR_FLAGS) |
| | 340 | $(BOARD_SIZE_CHECK) |
| | 341 | |
| | 342 | $(obj)u-boot.ldr.hex: $(obj)u-boot.ldr |
| | 343 | $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@ -I binary |
| | 344 | |
| | 345 | $(obj)u-boot.ldr.srec: $(obj)u-boot.ldr |
| | 346 | $(OBJCOPY) ${OBJCFLAGS} -O srec $< $@ -I binary |
| | 347 | |
| | 348 | $(obj)u-boot.img: $(obj)u-boot.bin |
| | 349 | $(obj)tools/mkimage -A $(ARCH) -T firmware -C none \ |
| | 350 | -a $(CONFIG_SYS_TEXT_BASE) -e 0 \ |
| | 351 | -n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \ |
| | 352 | sed -e 's/"[ ]*$$/ for $(BOARD) board"/') \ |
| | 353 | -d $< $@ |
| | 354 | |
| | 355 | $(obj)u-boot.imx: $(obj)u-boot.bin |
| | 356 | $(obj)tools/mkimage -n $(IMX_CONFIG) -T imximage \ |
| | 357 | -e $(CONFIG_SYS_TEXT_BASE) -d $< $@ |
| | 358 | |
| | 359 | $(obj)u-boot.kwb: $(obj)u-boot.bin |
| | 360 | $(obj)tools/mkimage -n $(CONFIG_SYS_KWD_CONFIG) -T kwbimage \ |
| | 361 | -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) -d $< $@ |
| | 362 | |
| | 363 | $(obj)u-boot.sha1: $(obj)u-boot.bin |
| | 364 | $(obj)tools/ubsha1 $(obj)u-boot.bin |
| | 365 | |
| | 366 | $(obj)u-boot.dis: $(obj)u-boot |
| | 367 | $(OBJDUMP) -d $< > $@ |
| | 368 | |
| | 369 | GEN_UBOOT = \ |
| | 370 | UNDEF_SYM=`$(OBJDUMP) -x $(LIBBOARD) $(LIBS) | \ |
| | 371 | sed -n -e 's/.*\($(SYM_PREFIX)__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\ |
| | 372 | cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \ |
| | 373 | --start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \ |
| | 374 | -Map u-boot.map -o u-boot |
| | 375 | $(obj)u-boot: depend \ |
| | 376 | $(SUBDIRS) $(OBJS) $(LIBBOARD) $(LIBS) $(LDSCRIPT) $(obj)u-boot.lds |
| | 377 | $(GEN_UBOOT) |
| | 378 | ifeq ($(CONFIG_KALLSYMS),y) |
| | 379 | smap=`$(call SYSTEM_MAP,u-boot) | \ |
| | 380 | awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \ |
| | 381 | $(CC) $(CFLAGS) -DSYSTEM_MAP="\"$${smap}\"" \ |
| | 382 | -c common/system_map.c -o $(obj)common/system_map.o |
| | 383 | $(GEN_UBOOT) $(obj)common/system_map.o |
| | 384 | endif |
| | 385 | |
| | 386 | $(OBJS): depend |
| | 387 | $(MAKE) -C $(CPUDIR) $(if $(REMOTE_BUILD),$@,$(notdir $@)) |
| | 388 | |
| | 389 | $(LIBS): depend $(SUBDIRS) |
| | 390 | $(MAKE) -C $(dir $(subst $(obj),,$@)) |
| | 391 | |
| | 392 | $(LIBBOARD): depend $(LIBS) |
| | 393 | $(MAKE) -C $(dir $(subst $(obj),,$@)) |
| | 394 | |
| | 395 | $(SUBDIRS): depend |
| | 396 | $(MAKE) -C $@ all |
| | 397 | |
| | 398 | $(LDSCRIPT): depend |
| | 399 | $(MAKE) -C $(dir $@) $(notdir $@) |
| | 400 | |
| | 401 | $(obj)u-boot.lds: $(LDSCRIPT) |
| | 402 | $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@ |
| | 403 | |
| | 404 | $(NAND_SPL): $(TIMESTAMP_FILE) $(VERSION_FILE) depend |
| | 405 | $(MAKE) -C nand_spl/board/$(BOARDDIR) all |
| | 406 | |
| | 407 | $(U_BOOT_NAND): $(NAND_SPL) $(obj)u-boot.bin |
| | 408 | cat $(obj)nand_spl/u-boot-spl-16k.bin $(obj)u-boot.bin > $(obj)u-boot-nand.bin |
| | 409 | |
| | 410 | $(ONENAND_IPL): $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk |
| | 411 | $(MAKE) -C onenand_ipl/board/$(BOARDDIR) all |
| | 412 | |
| | 413 | $(U_BOOT_ONENAND): $(ONENAND_IPL) $(obj)u-boot.bin |
| | 414 | cat $(ONENAND_BIN) $(obj)u-boot.bin > $(obj)u-boot-onenand.bin |
| | 415 | |
| | 416 | $(VERSION_FILE): |
| | 417 | @( printf '#define U_BOOT_VERSION "U-Boot %s%s"\n' "$(U_BOOT_VERSION)" \ |
| | 418 | '$(shell $(TOPDIR)/tools/setlocalversion $(TOPDIR))' ) > $@.tmp |
| | 419 | @cmp -s $@ $@.tmp && rm -f $@.tmp || mv -f $@.tmp $@ |
| | 420 | |
| | 421 | $(TIMESTAMP_FILE): |
| | 422 | @LC_ALL=C date +'#define U_BOOT_DATE "%b %d %C%y"' > $@ |
| | 423 | @LC_ALL=C date +'#define U_BOOT_TIME "%T"' >> $@ |
| | 424 | |
| | 425 | updater: |
| | 426 | $(MAKE) -C tools/updater all |
| | 427 | |
| | 428 | # Explicitly make _depend in subdirs containing multiple targets to prevent |
| | 429 | # parallel sub-makes creating .depend files simultaneously. |
| | 430 | depend dep: $(TIMESTAMP_FILE) $(VERSION_FILE) \ |
| | 431 | $(obj)include/autoconf.mk \ |
| | 432 | $(obj)include/generated/generic-asm-offsets.h |
| | 433 | for dir in $(SUBDIRS) $(CPUDIR) $(dir $(LDSCRIPT)) ; do \ |
| | 434 | $(MAKE) -C $$dir _depend ; done |
| | 435 | |
| | 436 | TAG_SUBDIRS = $(SUBDIRS) |
| | 437 | TAG_SUBDIRS += $(dir $(__LIBS)) |
| | 438 | TAG_SUBDIRS += include |
| | 439 | |
| | 440 | tags ctags: |
| | 441 | ctags -w -o $(obj)ctags `find $(TAG_SUBDIRS) \ |
| | 442 | -name '*.[chS]' -print` |
| | 443 | |
| | 444 | etags: |
| | 445 | etags -a -o $(obj)etags `find $(TAG_SUBDIRS) \ |
| | 446 | -name '*.[chS]' -print` |
| | 447 | cscope: |
| | 448 | find $(TAG_SUBDIRS) -name '*.[chS]' -print > cscope.files |
| | 449 | cscope -b -q -k |
| | 450 | |
| | 451 | SYSTEM_MAP = \ |
| | 452 | $(NM) $1 | \ |
| | 453 | grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \ |
| | 454 | LC_ALL=C sort |
| | 455 | $(obj)System.map: $(obj)u-boot |
| | 456 | @$(call SYSTEM_MAP,$<) > $(obj)System.map |
| | 457 | |
| | 458 | # |
| | 459 | # Auto-generate the autoconf.mk file (which is included by all makefiles) |
| | 460 | # |
| | 461 | # This target actually generates 2 files; autoconf.mk and autoconf.mk.dep. |
| | 462 | # the dep file is only include in this top level makefile to determine when |
| | 463 | # to regenerate the autoconf.mk file. |
| | 464 | $(obj)include/autoconf.mk.dep: $(obj)include/config.h include/common.h |
| | 465 | @$(XECHO) Generating $@ ; \ |
| | 466 | set -e ; \ |
| | 467 | : Generate the dependancies ; \ |
| | 468 | $(CC) -x c -DDO_DEPS_ONLY -M $(HOSTCFLAGS) $(CPPFLAGS) \ |
| | 469 | -MQ $(obj)include/autoconf.mk include/common.h > $@ |
| | 470 | |
| | 471 | $(obj)include/autoconf.mk: $(obj)include/config.h |
| | 472 | @$(XECHO) Generating $@ ; \ |
| | 473 | set -e ; \ |
| | 474 | : Extract the config macros ; \ |
| | 475 | $(CPP) $(CFLAGS) -DDO_DEPS_ONLY -dM include/common.h | \ |
| | 476 | sed -n -f tools/scripts/define2mk.sed > $@.tmp && \ |
| | 477 | mv $@.tmp $@ |
| | 478 | |
| | 479 | $(obj)include/generated/generic-asm-offsets.h: $(obj)include/autoconf.mk.dep \ |
| | 480 | $(obj)lib/asm-offsets.s |
| | 481 | @$(XECHO) Generating $@ |
| | 482 | tools/scripts/make-asm-offsets $(obj)lib/asm-offsets.s $@ |
| | 483 | |
| | 484 | $(obj)lib/asm-offsets.s: $(obj)include/autoconf.mk.dep \ |
| | 485 | $(src)lib/asm-offsets.c |
| | 486 | @mkdir -p $(obj)lib |
| | 487 | $(CC) -DDO_DEPS_ONLY \ |
| | 488 | $(CFLAGS) $(CFLAGS_$(BCURDIR)/$(@F)) $(CFLAGS_$(BCURDIR)) \ |
| | 489 | -o $@ $(src)lib/asm-offsets.c -c -S |
| | 490 | |
| | 491 | ######################################################################### |
| | 492 | else # !config.mk |
| | 493 | all $(obj)u-boot.hex $(obj)u-boot.srec $(obj)u-boot.bin \ |
| | 494 | $(obj)u-boot.img $(obj)u-boot.dis $(obj)u-boot \ |
| | 495 | $(filter-out tools,$(SUBDIRS)) $(TIMESTAMP_FILE) $(VERSION_FILE) \ |
| | 496 | updater depend dep tags ctags etags cscope $(obj)System.map: |
| | 497 | @echo "System not configured - see README" >&2 |
| | 498 | @ exit 1 |
| | 499 | |
| | 500 | tools: |
| | 501 | $(MAKE) -C $@ all |
| | 502 | endif # config.mk |
| | 503 | |
| | 504 | easylogo env gdb: |
| | 505 | $(MAKE) -C tools/$@ all MTD_VERSION=${MTD_VERSION} |
| | 506 | gdbtools: gdb |
| | 507 | |
| | 508 | tools-all: easylogo env gdb |
| | 509 | $(MAKE) -C tools HOST_TOOLS_ALL=y |
| | 510 | |
| | 511 | .PHONY : CHANGELOG |
| | 512 | CHANGELOG: |
| | 513 | git log --no-merges U-Boot-1_1_5.. | \ |
| | 514 | unexpand -a | sed -e 's/\s\s*$$//' > $@ |
| | 515 | |
| | 516 | include/license.h: tools/bin2header COPYING |
| | 517 | cat COPYING | gzip -9 -c | ./tools/bin2header license_gzip > include/license.h |
| | 518 | ######################################################################### |
| | 519 | |
| | 520 | unconfig: |
| | 521 | @rm -f $(obj)include/config.h $(obj)include/config.mk \ |
| | 522 | $(obj)board/*/config.tmp $(obj)board/*/*/config.tmp \ |
| | 523 | $(obj)include/autoconf.mk $(obj)include/autoconf.mk.dep |
| | 524 | |
| | 525 | %_config:: unconfig |
| | 526 | @$(MKCONFIG) -A $(@:_config=) |
| | 527 | |
| | 528 | sinclude .boards.depend |
| | 529 | .boards.depend: boards.cfg |
| | 530 | awk '(NF && $$1 !~ /^#/) { print $$1 ": " $$1 "_config; $$(MAKE)" }' $< > $@ |
| | 531 | |
| | 532 | # |
| | 533 | # Functions to generate common board directory names |
| | 534 | # |
| | 535 | lcname = $(shell echo $(1) | sed -e 's/\(.*\)_config/\L\1/') |
| | 536 | ucname = $(shell echo $(1) | sed -e 's/\(.*\)_config/\U\1/') |
| | 537 | |
| | 538 | ######################################################################### |
| | 539 | ## Coldfire |
| | 540 | ######################################################################### |
| | 541 | |
| | 542 | astro_mcf5373l_config \ |
| | 543 | astro_mcf5373l_RAM_config : unconfig |
| | 544 | @$(MKCONFIG) -n $@ -t $@ astro_mcf5373l m68k mcf532x mcf5373l astro |
| | 545 | |
| | 546 | M52277EVB_config \ |
| | 547 | M52277EVB_spansion_config \ |
| | 548 | M52277EVB_stmicro_config : unconfig |
| | 549 | @case "$@" in \ |
| | 550 | M52277EVB_config) FLASH=SPANSION;; \ |
| | 551 | M52277EVB_spansion_config) FLASH=SPANSION;; \ |
| | 552 | M52277EVB_stmicro_config) FLASH=STMICRO;; \ |
| | 553 | esac; \ |
| | 554 | if [ "$${FLASH}" = "SPANSION" ] ; then \ |
| | 555 | echo "#define CONFIG_SYS_SPANSION_BOOT" >> $(obj)include/config.h ; \ |
| | 556 | echo "CONFIG_SYS_TEXT_BASE = 0x00000000" > $(obj)board/freescale/m52277evb/config.tmp ; \ |
| | 557 | cp $(obj)board/freescale/m52277evb/u-boot.spa $(obj)board/freescale/m52277evb/u-boot.lds ; \ |
| | 558 | fi; \ |
| | 559 | if [ "$${FLASH}" = "STMICRO" ] ; then \ |
| | 560 | echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \ |
| | 561 | echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \ |
| | 562 | echo "CONFIG_SYS_TEXT_BASE = 0x43E00000" > $(obj)board/freescale/m52277evb/config.tmp ; \ |
| | 563 | cp $(obj)board/freescale/m52277evb/u-boot.stm $(obj)board/freescale/m52277evb/u-boot.lds ; \ |
| | 564 | fi |
| | 565 | @$(MKCONFIG) -n $@ -a M52277EVB m68k mcf5227x m52277evb freescale |
| | 566 | |
| | 567 | M5235EVB_config \ |
| | 568 | M5235EVB_Flash16_config \ |
| | 569 | M5235EVB_Flash32_config: unconfig |
| | 570 | @case "$@" in \ |
| | 571 | M5235EVB_config) FLASH=16;; \ |
| | 572 | M5235EVB_Flash16_config) FLASH=16;; \ |
| | 573 | M5235EVB_Flash32_config) FLASH=32;; \ |
| | 574 | esac; \ |
| | 575 | if [ "$${FLASH}" != "16" ] ; then \ |
| | 576 | echo "#define NORFLASH_PS32BIT 1" >> $(obj)include/config.h ; \ |
| | 577 | echo "CONFIG_SYS_TEXT_BASE = 0xFFC00000" > $(obj)board/freescale/m5235evb/config.tmp ; \ |
| | 578 | cp $(obj)board/freescale/m5235evb/u-boot.32 $(obj)board/freescale/m5235evb/u-boot.lds ; \ |
| | 579 | else \ |
| | 580 | echo "CONFIG_SYS_TEXT_BASE = 0xFFE00000" > $(obj)board/freescale/m5235evb/config.tmp ; \ |
| | 581 | cp $(obj)board/freescale/m5235evb/u-boot.16 $(obj)board/freescale/m5235evb/u-boot.lds ; \ |
| | 582 | fi |
| | 583 | @$(MKCONFIG) -n $@ -a M5235EVB m68k mcf523x m5235evb freescale |
| | 584 | |
| | 585 | cobra5272_config : unconfig |
| | 586 | @$(MKCONFIG) $@ m68k mcf52x2 cobra5272 |
| | 587 | |
| | 588 | EB+MCF-EV123_config : unconfig |
| | 589 | @mkdir -p $(obj)include |
| | 590 | @mkdir -p $(obj)board/BuS/EB+MCF-EV123 |
| | 591 | @echo "CONFIG_SYS_TEXT_BASE = 0xFFE00000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk |
| | 592 | @$(MKCONFIG) -n $@ EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS |
| | 593 | |
| | 594 | EB+MCF-EV123_internal_config : unconfig |
| | 595 | @mkdir -p $(obj)include |
| | 596 | @mkdir -p $(obj)board/BuS/EB+MCF-EV123 |
| | 597 | @echo "CONFIG_SYS_TEXT_BASE = 0xF0000000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk |
| | 598 | @$(MKCONFIG) -n $@ EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS |
| | 599 | |
| | 600 | M5329AFEE_config \ |
| | 601 | M5329BFEE_config : unconfig |
| | 602 | @case "$@" in \ |
| | 603 | M5329AFEE_config) NAND=0;; \ |
| | 604 | M5329BFEE_config) NAND=16;; \ |
| | 605 | esac; \ |
| | 606 | if [ "$${NAND}" != "0" ] ; then \ |
| | 607 | echo "#define NANDFLASH_SIZE $${NAND}" > $(obj)include/config.h ; \ |
| | 608 | fi |
| | 609 | @$(MKCONFIG) -n $@ -a M5329EVB m68k mcf532x m5329evb freescale |
| | 610 | |
| | 611 | M5373EVB_config : unconfig |
| | 612 | @case "$@" in \ |
| | 613 | M5373EVB_config) NAND=16;; \ |
| | 614 | esac; \ |
| | 615 | if [ "$${NAND}" != "0" ] ; then \ |
| | 616 | echo "#define NANDFLASH_SIZE $${NAND}" > $(obj)include/config.h ; \ |
| | 617 | fi |
| | 618 | @$(MKCONFIG) -a M5373EVB m68k mcf532x m5373evb freescale |
| | 619 | |
| | 620 | M54451EVB_config \ |
| | 621 | M54451EVB_stmicro_config : unconfig |
| | 622 | @case "$@" in \ |
| | 623 | M54451EVB_config) FLASH=NOR;; \ |
| | 624 | M54451EVB_stmicro_config) FLASH=STMICRO;; \ |
| | 625 | esac; \ |
| | 626 | if [ "$${FLASH}" = "NOR" ] ; then \ |
| | 627 | echo "CONFIG_SYS_TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54451evb/config.tmp ; \ |
| | 628 | cp $(obj)board/freescale/m54451evb/u-boot.spa $(obj)board/freescale/m54451evb/u-boot.lds ; \ |
| | 629 | fi; \ |
| | 630 | if [ "$${FLASH}" = "STMICRO" ] ; then \ |
| | 631 | echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \ |
| | 632 | echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \ |
| | 633 | echo "CONFIG_SYS_TEXT_BASE = 0x47E00000" > $(obj)board/freescale/m54451evb/config.tmp ; \ |
| | 634 | cp $(obj)board/freescale/m54451evb/u-boot.stm $(obj)board/freescale/m54451evb/u-boot.lds ; \ |
| | 635 | fi; \ |
| | 636 | echo "#define CONFIG_SYS_INPUT_CLKSRC 24000000" >> $(obj)include/config.h ; |
| | 637 | @$(MKCONFIG) -n $@ -a M54451EVB m68k mcf5445x m54451evb freescale |
| | 638 | |
| | 639 | M54455EVB_config \ |
| | 640 | M54455EVB_atmel_config \ |
| | 641 | M54455EVB_intel_config \ |
| | 642 | M54455EVB_a33_config \ |
| | 643 | M54455EVB_a66_config \ |
| | 644 | M54455EVB_i33_config \ |
| | 645 | M54455EVB_i66_config \ |
| | 646 | M54455EVB_stm33_config : unconfig |
| | 647 | @case "$@" in \ |
| | 648 | M54455EVB_config) FLASH=ATMEL; FREQ=33333333;; \ |
| | 649 | M54455EVB_atmel_config) FLASH=ATMEL; FREQ=33333333;; \ |
| | 650 | M54455EVB_intel_config) FLASH=INTEL; FREQ=33333333;; \ |
| | 651 | M54455EVB_a33_config) FLASH=ATMEL; FREQ=33333333;; \ |
| | 652 | M54455EVB_a66_config) FLASH=ATMEL; FREQ=66666666;; \ |
| | 653 | M54455EVB_i33_config) FLASH=INTEL; FREQ=33333333;; \ |
| | 654 | M54455EVB_i66_config) FLASH=INTEL; FREQ=66666666;; \ |
| | 655 | M54455EVB_stm33_config) FLASH=STMICRO; FREQ=33333333;; \ |
| | 656 | esac; \ |
| | 657 | if [ "$${FLASH}" = "INTEL" ] ; then \ |
| | 658 | echo "#define CONFIG_SYS_INTEL_BOOT" >> $(obj)include/config.h ; \ |
| | 659 | echo "CONFIG_SYS_TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54455evb/config.tmp ; \ |
| | 660 | cp $(obj)board/freescale/m54455evb/u-boot.int $(obj)board/freescale/m54455evb/u-boot.lds ; \ |
| | 661 | fi; \ |
| | 662 | if [ "$${FLASH}" = "ATMEL" ] ; then \ |
| | 663 | echo "#define CONFIG_SYS_ATMEL_BOOT" >> $(obj)include/config.h ; \ |
| | 664 | echo "CONFIG_SYS_TEXT_BASE = 0x04000000" > $(obj)board/freescale/m54455evb/config.tmp ; \ |
| | 665 | cp $(obj)board/freescale/m54455evb/u-boot.atm $(obj)board/freescale/m54455evb/u-boot.lds ; \ |
| | 666 | fi; \ |
| | 667 | if [ "$${FLASH}" = "STMICRO" ] ; then \ |
| | 668 | echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \ |
| | 669 | echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \ |
| | 670 | echo "CONFIG_SYS_TEXT_BASE = 0x4FE00000" > $(obj)board/freescale/m54455evb/config.tmp ; \ |
| | 671 | cp $(obj)board/freescale/m54455evb/u-boot.stm $(obj)board/freescale/m54455evb/u-boot.lds ; \ |
| | 672 | fi; \ |
| | 673 | echo "#define CONFIG_SYS_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \ |
| | 674 | @$(MKCONFIG) -n $@ -a M54455EVB m68k mcf5445x m54455evb freescale |
| | 675 | |
| | 676 | M5475AFE_config \ |
| | 677 | M5475BFE_config \ |
| | 678 | M5475CFE_config \ |
| | 679 | M5475DFE_config \ |
| | 680 | M5475EFE_config \ |
| | 681 | M5475FFE_config \ |
| | 682 | M5475GFE_config : unconfig |
| | 683 | @case "$@" in \ |
| | 684 | M5475AFE_config) BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \ |
| | 685 | M5475BFE_config) BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \ |
| | 686 | M5475CFE_config) BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \ |
| | 687 | M5475DFE_config) BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \ |
| | 688 | M5475EFE_config) BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \ |
| | 689 | M5475FFE_config) BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \ |
| | 690 | M5475GFE_config) BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \ |
| | 691 | esac; \ |
| | 692 | echo "#define CONFIG_SYS_BUSCLK 133333333" > $(obj)include/config.h ; \ |
| | 693 | echo "#define CONFIG_SYS_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \ |
| | 694 | echo "#define CONFIG_SYS_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \ |
| | 695 | if [ "$${RAM1}" != "0" ] ; then \ |
| | 696 | echo "#define CONFIG_SYS_DRAMSZ1 $${RAM1}" >> $(obj)include/config.h ; \ |
| | 697 | fi; \ |
| | 698 | if [ "$${CODE}" != "0" ] ; then \ |
| | 699 | echo "#define CONFIG_SYS_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \ |
| | 700 | fi; \ |
| | 701 | if [ "$${VID}" == "1" ] ; then \ |
| | 702 | echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \ |
| | 703 | fi; \ |
| | 704 | if [ "$${USB}" == "1" ] ; then \ |
| | 705 | echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \ |
| | 706 | fi |
| | 707 | @$(MKCONFIG) -n $@ -a M5475EVB m68k mcf547x_8x m547xevb freescale |
| | 708 | |
| | 709 | M5485AFE_config \ |
| | 710 | M5485BFE_config \ |
| | 711 | M5485CFE_config \ |
| | 712 | M5485DFE_config \ |
| | 713 | M5485EFE_config \ |
| | 714 | M5485FFE_config \ |
| | 715 | M5485GFE_config \ |
| | 716 | M5485HFE_config : unconfig |
| | 717 | @case "$@" in \ |
| | 718 | M5485AFE_config) BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \ |
| | 719 | M5485BFE_config) BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \ |
| | 720 | M5485CFE_config) BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \ |
| | 721 | M5485DFE_config) BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \ |
| | 722 | M5485EFE_config) BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \ |
| | 723 | M5485FFE_config) BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \ |
| | 724 | M5485GFE_config) BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \ |
| | 725 | M5485HFE_config) BOOT=2;CODE=16;VID=1;USB=0;RAM=64;RAM1=0;; \ |
| | 726 | esac; \ |
| | 727 | echo "#define CONFIG_SYS_BUSCLK 100000000" > $(obj)include/config.h ; \ |
| | 728 | echo "#define CONFIG_SYS_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \ |
| | 729 | echo "#define CONFIG_SYS_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \ |
| | 730 | if [ "$${RAM1}" != "0" ] ; then \ |
| | 731 | echo "#define CONFIG_SYS_DRAMSZ1 $${RAM1}" >> $(obj)include/config.h ; \ |
| | 732 | fi; \ |
| | 733 | if [ "$${CODE}" != "0" ] ; then \ |
| | 734 | echo "#define CONFIG_SYS_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \ |
| | 735 | fi; \ |
| | 736 | if [ "$${VID}" == "1" ] ; then \ |
| | 737 | echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \ |
| | 738 | fi; \ |
| | 739 | if [ "$${USB}" == "1" ] ; then \ |
| | 740 | echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \ |
| | 741 | fi |
| | 742 | @$(MKCONFIG) -n $@ -a M5485EVB m68k mcf547x_8x m548xevb freescale |
| | 743 | |
| | 744 | #======================================================================== |
| | 745 | # ARM |
| | 746 | #======================================================================== |
| | 747 | |
| | 748 | ######################################################################### |
| | 749 | ## Atmel AT91RM9200 Systems |
| | 750 | ######################################################################### |
| | 751 | |
| | 752 | CPUAT91_RAM_config \ |
| | 753 | CPUAT91_config : unconfig |
| | 754 | @mkdir -p $(obj)include |
| | 755 | @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h |
| | 756 | @$(MKCONFIG) -n $@ -a cpuat91 arm arm920t cpuat91 eukrea at91 |
| | 757 | |
| | 758 | ######################################################################### |
| | 759 | ## ARM926EJ-S Systems |
| | 760 | ######################################################################### |
| | 761 | |
| | 762 | at91sam9260ek_nandflash_config \ |
| | 763 | at91sam9260ek_dataflash_cs0_config \ |
| | 764 | at91sam9260ek_dataflash_cs1_config \ |
| | 765 | at91sam9260ek_config \ |
| | 766 | at91sam9g20ek_nandflash_config \ |
| | 767 | at91sam9g20ek_dataflash_cs0_config \ |
| | 768 | at91sam9g20ek_dataflash_cs1_config \ |
| | 769 | at91sam9g20ek_config : unconfig |
| | 770 | @mkdir -p $(obj)include |
| | 771 | @if [ "$(findstring 9g20,$@)" ] ; then \ |
| | 772 | echo "#define CONFIG_AT91SAM9G20EK 1" >>$(obj)include/config.h ; \ |
| | 773 | else \ |
| | 774 | echo "#define CONFIG_AT91SAM9260EK 1" >>$(obj)include/config.h ; \ |
| | 775 | fi; |
| | 776 | @if [ "$(findstring _nandflash,$@)" ] ; then \ |
| | 777 | echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ |
| | 778 | elif [ "$(findstring dataflash_cs0,$@)" ] ; then \ |
| | 779 | echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \ |
| | 780 | else \ |
| | 781 | echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1" >>$(obj)include/config.h ; \ |
| | 782 | fi; |
| | 783 | @$(MKCONFIG) -n $@ -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91 |
| | 784 | |
| | 785 | at91sam9xeek_nandflash_config \ |
| | 786 | at91sam9xeek_dataflash_cs0_config \ |
| | 787 | at91sam9xeek_dataflash_cs1_config \ |
| | 788 | at91sam9xeek_config : unconfig |
| | 789 | @mkdir -p $(obj)include |
| | 790 | @if [ "$(findstring _nandflash,$@)" ] ; then \ |
| | 791 | echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ |
| | 792 | elif [ "$(findstring dataflash_cs0,$@)" ] ; then \ |
| | 793 | echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \ |
| | 794 | else \ |
| | 795 | echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1" >>$(obj)include/config.h ; \ |
| | 796 | fi; |
| | 797 | @$(MKCONFIG) -n $@ -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91 |
| | 798 | |
| | 799 | at91sam9261ek_nandflash_config \ |
| | 800 | at91sam9261ek_dataflash_cs0_config \ |
| | 801 | at91sam9261ek_dataflash_cs3_config \ |
| | 802 | at91sam9261ek_config \ |
| | 803 | at91sam9g10ek_nandflash_config \ |
| | 804 | at91sam9g10ek_dataflash_cs0_config \ |
| | 805 | at91sam9g10ek_dataflash_cs3_config \ |
| | 806 | at91sam9g10ek_config : unconfig |
| | 807 | @mkdir -p $(obj)include |
| | 808 | @if [ "$(findstring 9g10,$@)" ] ; then \ |
| | 809 | echo "#define CONFIG_AT91SAM9G10EK 1" >>$(obj)include/config.h ; \ |
| | 810 | else \ |
| | 811 | echo "#define CONFIG_AT91SAM9261EK 1" >>$(obj)include/config.h ; \ |
| | 812 | fi; |
| | 813 | @if [ "$(findstring _nandflash,$@)" ] ; then \ |
| | 814 | echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ |
| | 815 | elif [ "$(findstring dataflash_cs0,$@)" ] ; then \ |
| | 816 | echo "#define CONFIG_SYS_USE_DATAFLASH_CS3 1" >>$(obj)include/config.h ; \ |
| | 817 | else \ |
| | 818 | echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \ |
| | 819 | fi; |
| | 820 | @$(MKCONFIG) -n $@ -a at91sam9261ek arm arm926ejs at91sam9261ek atmel at91 |
| | 821 | |
| | 822 | at91sam9263ek_norflash_config \ |
| | 823 | at91sam9263ek_norflash_boot_config \ |
| | 824 | at91sam9263ek_nandflash_config \ |
| | 825 | at91sam9263ek_dataflash_config \ |
| | 826 | at91sam9263ek_dataflash_cs0_config \ |
| | 827 | at91sam9263ek_config : unconfig |
| | 828 | @mkdir -p $(obj)include |
| | 829 | @if [ "$(findstring _nandflash,$@)" ] ; then \ |
| | 830 | echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ |
| | 831 | elif [ "$(findstring norflash,$@)" ] ; then \ |
| | 832 | echo "#define CONFIG_SYS_USE_NORFLASH 1" >>$(obj)include/config.h ; \ |
| | 833 | else \ |
| | 834 | echo "#define CONFIG_SYS_USE_DATAFLASH 1" >>$(obj)include/config.h ; \ |
| | 835 | fi; |
| | 836 | @if [ "$(findstring norflash_boot,$@)" ] ; then \ |
| | 837 | echo "#define CONFIG_SYS_USE_BOOT_NORFLASH 1" >>$(obj)include/config.h ; \ |
| | 838 | fi; |
| | 839 | @$(MKCONFIG) -n $@ -a at91sam9263ek arm arm926ejs at91sam9263ek atmel at91 |
| | 840 | |
| | 841 | at91sam9rlek_nandflash_config \ |
| | 842 | at91sam9rlek_dataflash_config \ |
| | 843 | at91sam9rlek_dataflash_cs0_config \ |
| | 844 | at91sam9rlek_config : unconfig |
| | 845 | @mkdir -p $(obj)include |
| | 846 | @if [ "$(findstring _nandflash,$@)" ] ; then \ |
| | 847 | echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ |
| | 848 | else \ |
| | 849 | echo "#define CONFIG_SYS_USE_DATAFLASH 1" >>$(obj)include/config.h ; \ |
| | 850 | fi; |
| | 851 | @$(MKCONFIG) -n $@ -a at91sam9rlek arm arm926ejs at91sam9rlek atmel at91 |
| | 852 | |
| | 853 | CPU9G20_128M_config \ |
| | 854 | CPU9G20_config \ |
| | 855 | CPU9260_128M_config \ |
| | 856 | CPU9260_config : unconfig |
| | 857 | @mkdir -p $(obj)include |
| | 858 | @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h |
| | 859 | @$(MKCONFIG) -n $@ -a cpu9260 arm arm926ejs cpu9260 eukrea at91 |
| | 860 | |
| | 861 | at91sam9m10g45ek_nandflash_config \ |
| | 862 | at91sam9m10g45ek_dataflash_config \ |
| | 863 | at91sam9m10g45ek_dataflash_cs0_config \ |
| | 864 | at91sam9m10g45ek_config \ |
| | 865 | at91sam9g45ekes_nandflash_config \ |
| | 866 | at91sam9g45ekes_dataflash_config \ |
| | 867 | at91sam9g45ekes_dataflash_cs0_config \ |
| | 868 | at91sam9g45ekes_config : unconfig |
| | 869 | @mkdir -p $(obj)include |
| | 870 | @if [ "$(findstring 9m10,$@)" ] ; then \ |
| | 871 | echo "#define CONFIG_AT91SAM9M10G45EK 1" >>$(obj)include/config.h ; \ |
| | 872 | else \ |
| | 873 | echo "#define CONFIG_AT91SAM9G45EKES 1" >>$(obj)include/config.h ; \ |
| | 874 | fi; |
| | 875 | @if [ "$(findstring _nandflash,$@)" ] ; then \ |
| | 876 | echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ |
| | 877 | else \ |
| | 878 | echo "#define CONFIG_ATMEL_SPI 1" >>$(obj)include/config.h ; \ |
| | 879 | fi; |
| | 880 | @$(MKCONFIG) -n $@ -a at91sam9m10g45ek arm arm926ejs at91sam9m10g45ek atmel at91 |
| | 881 | |
| | 882 | pm9g45_config : unconfig |
| | 883 | @mkdir -p $(obj)include |
| | 884 | @$(MKCONFIG) -a pm9g45 arm arm926ejs pm9g45 ronetix at91 |
| | 885 | |
| | 886 | SBC35_A9G20_NANDFLASH_config \ |
| | 887 | SBC35_A9G20_EEPROM_config \ |
| | 888 | SBC35_A9G20_config : unconfig |
| | 889 | @mkdir -p $(obj)include |
| | 890 | @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h |
| | 891 | @$(MKCONFIG) -n $@ -a sbc35_a9g20 arm arm926ejs sbc35_a9g20 calao at91 |
| | 892 | |
| | 893 | TNY_A9G20_NANDFLASH_config \ |
| | 894 | TNY_A9G20_EEPROM_config \ |
| | 895 | TNY_A9G20_config \ |
| | 896 | TNY_A9260_NANDFLASH_config \ |
| | 897 | TNY_A9260_EEPROM_config \ |
| | 898 | TNY_A9260_config : unconfig |
| | 899 | @mkdir -p $(obj)include |
| | 900 | @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h |
| | 901 | @$(MKCONFIG) -n $@ -a tny_a9260 arm arm926ejs tny_a9260 calao at91 |
| | 902 | |
| | 903 | ######################################################################## |
| | 904 | ## ARM Integrator boards - see doc/README-integrator for more info. |
| | 905 | integratorap_config \ |
| | 906 | ap_config \ |
| | 907 | ap966_config \ |
| | 908 | ap922_config \ |
| | 909 | ap922_XA10_config \ |
| | 910 | ap7_config \ |
| | 911 | ap720t_config \ |
| | 912 | ap920t_config \ |
| | 913 | ap926ejs_config \ |
| | 914 | ap946es_config: unconfig |
| | 915 | @board/armltd/integrator/split_by_variant.sh ap $@ |
| | 916 | |
| | 917 | integratorcp_config \ |
| | 918 | cp_config \ |
| | 919 | cp920t_config \ |
| | 920 | cp926ejs_config \ |
| | 921 | cp946es_config \ |
| | 922 | cp1136_config \ |
| | 923 | cp966_config \ |
| | 924 | cp922_config \ |
| | 925 | cp922_XA10_config \ |
| | 926 | cp1026_config: unconfig |
| | 927 | @board/armltd/integrator/split_by_variant.sh cp $@ |
| | 928 | |
| | 929 | nhk8815_config \ |
| | 930 | nhk8815_onenand_config: unconfig |
| | 931 | @mkdir -p $(obj)include |
| | 932 | @ > $(obj)include/config.h |
| | 933 | @if [ "$(findstring _onenand, $@)" ] ; then \ |
| | 934 | echo "#define CONFIG_BOOT_ONENAND" >> $(obj)include/config.h; \ |
| | 935 | fi |
| | 936 | @$(MKCONFIG) -n $@ -a nhk8815 arm arm926ejs nhk8815 st nomadik |
| | 937 | |
| | 938 | xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1)))) |
| | 939 | |
| | 940 | omap1610inn_config \ |
| | 941 | omap1610inn_cs0boot_config \ |
| | 942 | omap1610inn_cs3boot_config \ |
| | 943 | omap1610inn_cs_autoboot_config \ |
| | 944 | omap1610h2_config \ |
| | 945 | omap1610h2_cs0boot_config \ |
| | 946 | omap1610h2_cs3boot_config \ |
| | 947 | omap1610h2_cs_autoboot_config: unconfig |
| | 948 | @mkdir -p $(obj)include |
| | 949 | @if [ "$(findstring _cs0boot_, $@)" ] ; then \ |
| | 950 | echo "#define CONFIG_CS0_BOOT" >> .$(obj)include/config.h ; \ |
| | 951 | elif [ "$(findstring _cs_autoboot_, $@)" ] ; then \ |
| | 952 | echo "#define CONFIG_CS_AUTOBOOT" >> $(obj)include/config.h ; \ |
| | 953 | else \ |
| | 954 | echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \ |
| | 955 | fi; |
| | 956 | @$(MKCONFIG) -n $@ -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn ti omap |
| | 957 | |
| | 958 | omap730p2_config \ |
| | 959 | omap730p2_cs0boot_config \ |
| | 960 | omap730p2_cs3boot_config : unconfig |
| | 961 | @mkdir -p $(obj)include |
| | 962 | @if [ "$(findstring _cs0boot_, $@)" ] ; then \ |
| | 963 | echo "#define CONFIG_CS0_BOOT" >> $(obj)include/config.h ; \ |
| | 964 | else \ |
| | 965 | echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \ |
| | 966 | fi; |
| | 967 | @$(MKCONFIG) -n $@ -a omap730p2 arm arm926ejs omap730p2 ti omap |
| | 968 | |
| | 969 | spear300_config \ |
| | 970 | spear310_config \ |
| | 971 | spear320_config : unconfig |
| | 972 | @$(MKCONFIG) -n $@ -t $@ spear3xx arm arm926ejs $(@:_config=) spear spear |
| | 973 | |
| | 974 | spear600_config : unconfig |
| | 975 | @$(MKCONFIG) -n $@ -t $@ spear6xx arm arm926ejs $(@:_config=) spear spear |
| | 976 | |
| | 977 | SX1_stdout_serial_config \ |
| | 978 | SX1_config: unconfig |
| | 979 | @mkdir -p $(obj)include |
| | 980 | @if [ "$(findstring _stdout_serial_, $@)" ] ; then \ |
| | 981 | echo "#undef CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \ |
| | 982 | else \ |
| | 983 | echo "#define CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \ |
| | 984 | fi; |
| | 985 | @$(MKCONFIG) -n $@ SX1 arm arm925t sx1 |
| | 986 | |
| | 987 | # TRAB default configuration: 8 MB Flash, 32 MB RAM |
| | 988 | trab_config \ |
| | 989 | trab_bigram_config \ |
| | 990 | trab_bigflash_config \ |
| | 991 | trab_old_config: unconfig |
| | 992 | @mkdir -p $(obj)include |
| | 993 | @mkdir -p $(obj)board/trab |
| | 994 | @[ -z "$(findstring _bigram,$@)" ] || \ |
| | 995 | { echo "#define CONFIG_FLASH_8MB" >>$(obj)include/config.h ; \ |
| | 996 | echo "#define CONFIG_RAM_32MB" >>$(obj)include/config.h ; \ |
| | 997 | } |
| | 998 | @[ -z "$(findstring _bigflash,$@)" ] || \ |
| | 999 | { echo "#define CONFIG_FLASH_16MB" >>$(obj)include/config.h ; \ |
| | 1000 | echo "#define CONFIG_RAM_16MB" >>$(obj)include/config.h ; \ |
| | 1001 | echo "CONFIG_SYS_TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \ |
| | 1002 | } |
| | 1003 | @[ -z "$(findstring _old,$@)" ] || \ |
| | 1004 | { echo "#define CONFIG_FLASH_8MB" >>$(obj)include/config.h ; \ |
| | 1005 | echo "#define CONFIG_RAM_16MB" >>$(obj)include/config.h ; \ |
| | 1006 | echo "CONFIG_SYS_TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \ |
| | 1007 | } |
| | 1008 | @$(MKCONFIG) -n $@ -a trab arm arm920t trab - s3c24x0 |
| | 1009 | |
| | 1010 | tx25_config : unconfig |
| | 1011 | @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk |
| | 1012 | @$(MKCONFIG) $@ arm arm926ejs tx25 karo mx25 |
| | 1013 | |
| | 1014 | edb9301_config \ |
| | 1015 | edb9302_config \ |
| | 1016 | edb9302a_config \ |
| | 1017 | edb9307_config \ |
| | 1018 | edb9307a_config \ |
| | 1019 | edb9312_config \ |
| | 1020 | edb9315_config \ |
| | 1021 | edb9315a_config: unconfig |
| | 1022 | @$(MKCONFIG) -n $@ -t $(@:_config=) edb93xx arm arm920t edb93xx - ep93xx |
| | 1023 | |
| | 1024 | ######################################################################### |
| | 1025 | # ARM supplied Versatile development boards |
| | 1026 | ######################################################################### |
| | 1027 | |
| | 1028 | versatile_config \ |
| | 1029 | versatileab_config \ |
| | 1030 | versatilepb_config : unconfig |
| | 1031 | @board/armltd/versatile/split_by_variant.sh $@ |
| | 1032 | |
| | 1033 | ######################################################################### |
| | 1034 | ## XScale Systems |
| | 1035 | ######################################################################### |
| | 1036 | |
| | 1037 | pdnb3_config \ |
| | 1038 | scpu_config: unconfig |
| | 1039 | @mkdir -p $(obj)include |
| | 1040 | @if [ "$(findstring scpu_,$@)" ] ; then \ |
| | 1041 | echo "#define CONFIG_SCPU" >>$(obj)include/config.h ; \ |
| | 1042 | fi |
| | 1043 | @$(MKCONFIG) -n $@ -a pdnb3 arm ixp pdnb3 prodrive |
| | 1044 | |
| | 1045 | ######################################################################### |
| | 1046 | ## ARM1136 Systems |
| | 1047 | ######################################################################### |
| | 1048 | |
| | 1049 | apollon_config : unconfig |
| | 1050 | @mkdir -p $(obj)include |
| | 1051 | @echo "#define CONFIG_ONENAND_U_BOOT" > $(obj)include/config.h |
| | 1052 | @echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk |
| | 1053 | @$(MKCONFIG) $@ arm arm1136 apollon - omap24xx |
| | 1054 | |
| | 1055 | imx31_phycore_eet_config \ |
| | 1056 | imx31_phycore_config : unconfig |
| | 1057 | @mkdir -p $(obj)include |
| | 1058 | @if [ -n "$(findstring _eet_,$@)" ]; then \ |
| | 1059 | echo "#define CONFIG_IMX31_PHYCORE_EET" >> $(obj)include/config.h; \ |
| | 1060 | fi |
| | 1061 | @$(MKCONFIG) -n $@ -a imx31_phycore arm arm1136 imx31_phycore - mx31 |
| | 1062 | |
| | 1063 | mx31pdk_config \ |
| | 1064 | mx31pdk_nand_config : unconfig |
| | 1065 | @mkdir -p $(obj)include |
| | 1066 | @if [ -n "$(findstring _nand_,$@)" ]; then \ |
| | 1067 | echo "#define CONFIG_NAND_U_BOOT" >> $(obj)include/config.h; \ |
| | 1068 | else \ |
| | 1069 | echo "#define CONFIG_SKIP_LOWLEVEL_INIT" >> $(obj)include/config.h; \ |
| | 1070 | fi |
| | 1071 | @$(MKCONFIG) -n $@ -a mx31pdk arm arm1136 mx31pdk freescale mx31 |
| | 1072 | |
| | 1073 | ######################################################################### |
| | 1074 | ## ARM1176 Systems |
| | 1075 | ######################################################################### |
| | 1076 | smdk6400_noUSB_config \ |
| | 1077 | smdk6400_config : unconfig |
| | 1078 | @mkdir -p $(obj)include $(obj)board/samsung/smdk6400 |
| | 1079 | @mkdir -p $(obj)nand_spl/board/samsung/smdk6400 |
| | 1080 | @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h |
| | 1081 | @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk |
| | 1082 | @if [ -z "$(findstring smdk6400_noUSB_config,$@)" ]; then \ |
| | 1083 | echo "RAM_TEXT = 0x57e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\ |
| | 1084 | else \ |
| | 1085 | echo "RAM_TEXT = 0xc7e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\ |
| | 1086 | fi |
| | 1087 | @$(MKCONFIG) smdk6400 arm arm1176 smdk6400 samsung s3c64xx |
| | 1088 | @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk |
| | 1089 | |
| | 1090 | #======================================================================== |
| | 1091 | # MIPS |
| | 1092 | #======================================================================== |
| | 1093 | ######################################################################### |
| | 1094 | ## MIPS32 4Kc |
| | 1095 | ######################################################################### |
| | 1096 | |
| | 1097 | incaip_100MHz_config \ |
| | 1098 | incaip_133MHz_config \ |
| | 1099 | incaip_150MHz_config \ |
| | 1100 | incaip_config: unconfig |
| | 1101 | @mkdir -p $(obj)include |
| | 1102 | @[ -z "$(findstring _100MHz,$@)" ] || \ |
| | 1103 | echo "#define CPU_CLOCK_RATE 100000000" >>$(obj)include/config.h |
| | 1104 | @[ -z "$(findstring _133MHz,$@)" ] || \ |
| | 1105 | echo "#define CPU_CLOCK_RATE 133000000" >>$(obj)include/config.h |
| | 1106 | @[ -z "$(findstring _150MHz,$@)" ] || \ |
| | 1107 | echo "#define CPU_CLOCK_RATE 150000000" >>$(obj)include/config.h |
| | 1108 | @$(MKCONFIG) -n $@ -a incaip mips mips incaip |
| | 1109 | |
| | 1110 | vct_premium_config \ |
| | 1111 | vct_premium_small_config \ |
| | 1112 | vct_premium_onenand_config \ |
| | 1113 | vct_premium_onenand_small_config \ |
| | 1114 | vct_platinum_config \ |
| | 1115 | vct_platinum_small_config \ |
| | 1116 | vct_platinum_onenand_config \ |
| | 1117 | vct_platinum_onenand_small_config \ |
| | 1118 | vct_platinumavc_config \ |
| | 1119 | vct_platinumavc_small_config \ |
| | 1120 | vct_platinumavc_onenand_config \ |
| | 1121 | vct_platinumavc_onenand_small_config: unconfig |
| | 1122 | @mkdir -p $(obj)include |
| | 1123 | @[ -z "$(findstring _premium,$@)" ] || \ |
| | 1124 | echo "#define CONFIG_VCT_PREMIUM" > $(obj)include/config.h |
| | 1125 | @[ -z "$(findstring _platinum_,$@)" ] || \ |
| | 1126 | echo "#define CONFIG_VCT_PLATINUM" > $(obj)include/config.h |
| | 1127 | @[ -z "$(findstring _platinumavc,$@)" ] || \ |
| | 1128 | echo "#define CONFIG_VCT_PLATINUMAVC" > $(obj)include/config.h |
| | 1129 | @[ -z "$(findstring _onenand,$@)" ] || \ |
| | 1130 | echo "#define CONFIG_VCT_ONENAND" >> $(obj)include/config.h |
| | 1131 | @[ -z "$(findstring _small,$@)" ] || \ |
| | 1132 | echo "#define CONFIG_VCT_SMALL_IMAGE" >> $(obj)include/config.h |
| | 1133 | @$(MKCONFIG) -n $@ -a vct mips mips vct micronas |
| | 1134 | |
| | 1135 | ######################################################################### |
| | 1136 | ## MIPS32 AU1X00 |
| | 1137 | ######################################################################### |
| | 1138 | |
| | 1139 | dbau1000_config : unconfig |
| | 1140 | @mkdir -p $(obj)include |
| | 1141 | @echo "#define CONFIG_DBAU1000 1" >$(obj)include/config.h |
| | 1142 | @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 |
| | 1143 | |
| | 1144 | dbau1100_config : unconfig |
| | 1145 | @mkdir -p $(obj)include |
| | 1146 | @echo "#define CONFIG_DBAU1100 1" >$(obj)include/config.h |
| | 1147 | @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 |
| | 1148 | |
| | 1149 | dbau1500_config : unconfig |
| | 1150 | @mkdir -p $(obj)include |
| | 1151 | @echo "#define CONFIG_DBAU1500 1" >$(obj)include/config.h |
| | 1152 | @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 |
| | 1153 | |
| | 1154 | dbau1550_config : unconfig |
| | 1155 | @mkdir -p $(obj)include |
| | 1156 | @echo "#define CONFIG_DBAU1550 1" >$(obj)include/config.h |
| | 1157 | @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 |
| | 1158 | |
| | 1159 | dbau1550_el_config : unconfig |
| | 1160 | @mkdir -p $(obj)include |
| | 1161 | @echo "#define CONFIG_DBAU1550 1" >$(obj)include/config.h |
| | 1162 | @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 |
| | 1163 | |
| | 1164 | gth2_config : unconfig |
| | 1165 | @mkdir -p $(obj)include |
| | 1166 | @echo "#define CONFIG_GTH2 1" >$(obj)include/config.h |
| | 1167 | @$(MKCONFIG) -a $@ mips mips gth2 |
| | 1168 | |
| | 1169 | pb1000_config : unconfig |
| | 1170 | @mkdir -p $(obj)include |
| | 1171 | @echo "#define CONFIG_PB1000 1" >$(obj)include/config.h |
| | 1172 | @$(MKCONFIG) -a pb1x00 mips mips pb1x00 |
| | 1173 | |
| | 1174 | qemu_mips_config : unconfig |
| | 1175 | @mkdir -p $(obj)include |
| | 1176 | @echo "#define CONFIG_QEMU_MIPS 1" >$(obj)include/config.h |
| | 1177 | @$(MKCONFIG) -a qemu-mips mips mips qemu-mips |
| | 1178 | |
| | 1179 | #======================================================================== |
| | 1180 | # Nios |
| | 1181 | #======================================================================== |
| | 1182 | |
| | 1183 | ######################################################################### |
| | 1184 | ## Nios-II |
| | 1185 | ######################################################################### |
| | 1186 | |
| | 1187 | # nios2 generic boards |
| | 1188 | NIOS2_GENERIC = nios2-generic |
| | 1189 | |
| | 1190 | $(NIOS2_GENERIC:%=%_config) : unconfig |
| | 1191 | @$(MKCONFIG) $@ nios2 nios2 nios2-generic altera |
| | 1192 | |
| | 1193 | ######################################################################### |
| | 1194 | ######################################################################### |
| | 1195 | |
| | 1196 | clean: |
| | 1197 | @rm -f $(obj)examples/standalone/82559_eeprom \ |
| | 1198 | $(obj)examples/standalone/atmel_df_pow2 \ |
| | 1199 | $(obj)examples/standalone/eepro100_eeprom \ |
| | 1200 | $(obj)examples/standalone/hello_world \ |
| | 1201 | $(obj)examples/standalone/interrupt \ |
| | 1202 | $(obj)examples/standalone/mem_to_mem_idma2intr \ |
| | 1203 | $(obj)examples/standalone/sched \ |
| | 1204 | $(obj)examples/standalone/smc91111_eeprom \ |
| | 1205 | $(obj)examples/standalone/test_burst \ |
| | 1206 | $(obj)examples/standalone/timer |
| | 1207 | @rm -f $(obj)examples/api/demo{,.bin} |
| | 1208 | @rm -f $(obj)tools/bmp_logo $(obj)tools/easylogo/easylogo \ |
| | 1209 | $(obj)tools/env/{fw_printenv,fw_setenv} \ |
| | 1210 | $(obj)tools/envcrc \ |
| | 1211 | $(obj)tools/gdb/{astest,gdbcont,gdbsend} \ |
| | 1212 | $(obj)tools/gen_eth_addr $(obj)tools/img2srec \ |
| | 1213 | $(obj)tools/mkimage $(obj)tools/mpc86x_clk \ |
| | 1214 | $(obj)tools/ncb $(obj)tools/ubsha1 |
| | 1215 | @rm -f $(obj)board/cray/L1/{bootscript.c,bootscript.image} \ |
| | 1216 | $(obj)board/matrix_vision/*/bootscript.img \ |
| | 1217 | $(obj)board/netstar/{eeprom,crcek,crcit,*.srec,*.bin} \ |
| | 1218 | $(obj)board/trab/trab_fkt $(obj)board/voiceblue/eeprom \ |
| | 1219 | $(obj)board/armltd/{integratorap,integratorcp}/u-boot.lds \ |
| | 1220 | $(obj)u-boot.lds \ |
| | 1221 | $(obj)arch/blackfin/cpu/bootrom-asm-offsets.[chs] |
| | 1222 | @rm -f $(obj)include/bmp_logo.h |
| | 1223 | @rm -f $(obj)lib/asm-offsets.s |
| | 1224 | @rm -f $(obj)nand_spl/{u-boot.lds,u-boot-spl,u-boot-spl.map,System.map} |
| | 1225 | @rm -f $(obj)onenand_ipl/onenand-{ipl,ipl.bin,ipl.map} |
| | 1226 | @rm -f $(ONENAND_BIN) |
| | 1227 | @rm -f $(obj)onenand_ipl/u-boot.lds |
| | 1228 | @rm -f $(TIMESTAMP_FILE) $(VERSION_FILE) |
| | 1229 | @find $(OBJTREE) -type f \ |
| | 1230 | \( -name 'core' -o -name '*.bak' -o -name '*~' \ |
| | 1231 | -o -name '*.o' -o -name '*.a' -o -name '*.exe' \) -print \ |
| | 1232 | | xargs rm -f |
| | 1233 | |
| | 1234 | clobber: clean |
| | 1235 | @find $(OBJTREE) -type f \( -name '*.depend' \ |
| | 1236 | -o -name '*.srec' -o -name '*.bin' -o -name u-boot.img \) \ |
| | 1237 | -print0 \ |
| | 1238 | | xargs -0 rm -f |
| | 1239 | @rm -f $(OBJS) $(obj)*.bak $(obj)ctags $(obj)etags $(obj)TAGS \ |
| | 1240 | $(obj)cscope.* $(obj)*.*~ |
| | 1241 | @rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL) |
| | 1242 | @rm -f $(obj)u-boot.kwb |
| | 1243 | @rm -f $(obj)u-boot.imx |
| | 1244 | @rm -f $(obj)tools/{env/crc32.c,inca-swap-bytes} |
| | 1245 | @rm -f $(obj)arch/powerpc/cpu/mpc824x/bedbug_603e.c |
| | 1246 | @rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm |
| | 1247 | @rm -fr $(obj)include/generated |
| | 1248 | @[ ! -d $(obj)nand_spl ] || find $(obj)nand_spl -name "*" -type l -print | xargs rm -f |
| | 1249 | @[ ! -d $(obj)onenand_ipl ] || find $(obj)onenand_ipl -name "*" -type l -print | xargs rm -f |
| | 1250 | |
| | 1251 | ifeq ($(OBJTREE),$(SRCTREE)) |
| | 1252 | mrproper \ |
| | 1253 | distclean: clobber unconfig |
| | 1254 | else |
| | 1255 | mrproper \ |
| | 1256 | distclean: clobber unconfig |
| | 1257 | rm -rf $(obj)* |
| | 1258 | endif |
| | 1259 | |
| | 1260 | backup: |
| | 1261 | F=`basename $(TOPDIR)` ; cd .. ; \ |
| | 1262 | gtar --force-local -zcvf `LC_ALL=C date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F |
| | 1263 | |
| | 1264 | ######################################################################### |
projects / people / ms / u-boot.git / blame_incremental