| | 1 | CONFIG_ARM=y |
| | 2 | CONFIG_ARCH_AT91=y |
| | 3 | CONFIG_SYS_TEXT_BASE=0x21f00000 |
| | 4 | CONFIG_TARGET_AT91SAM9261EK=y |
| | 5 | CONFIG_SYS_MALLOC_F_LEN=0x2000 |
| | 6 | CONFIG_DEFAULT_DEVICE_TREE="at91sam9261ek" |
| | 7 | CONFIG_DEBUG_UART=y |
| | 8 | CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9261,SYS_USE_DATAFLASH_CS3" |
| | 9 | CONFIG_BOOTDELAY=3 |
| | 10 | CONFIG_USE_BOOTARGS=y |
| | 11 | CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock0 mtdparts=atmel_nand:-(root) rw rootfstype=jffs2" |
| | 12 | # CONFIG_CONSOLE_MUX is not set |
| | 13 | CONFIG_SYS_CONSOLE_IS_IN_ENV=y |
| | 14 | # CONFIG_DISPLAY_BOARDINFO is not set |
| | 15 | CONFIG_SYS_PROMPT="U-Boot> " |
| | 16 | # CONFIG_CMD_BDI is not set |
| | 17 | # CONFIG_CMD_IMI is not set |
| | 18 | # CONFIG_CMD_LOADS is not set |
| | 19 | CONFIG_CMD_NAND=y |
| | 20 | CONFIG_CMD_SF=y |
| | 21 | CONFIG_CMD_USB=y |
| | 22 | # CONFIG_CMD_SOURCE is not set |
| | 23 | # CONFIG_CMD_SETEXPR is not set |
| | 24 | CONFIG_CMD_DHCP=y |
| | 25 | CONFIG_CMD_PING=y |
| | 26 | CONFIG_CMD_FAT=y |
| | 27 | CONFIG_OF_CONTROL=y |
| | 28 | CONFIG_ENV_IS_IN_SPI_FLASH=y |
| | 29 | CONFIG_DM=y |
| | 30 | CONFIG_CLK=y |
| | 31 | CONFIG_CLK_AT91=y |
| | 32 | CONFIG_DM_GPIO=y |
| | 33 | CONFIG_AT91_GPIO=y |
| | 34 | # CONFIG_MMC is not set |
| | 35 | CONFIG_DM_SPI_FLASH=y |
| | 36 | CONFIG_SPI_FLASH=y |
| | 37 | CONFIG_SPI_FLASH_ATMEL=y |
| | 38 | CONFIG_SPI_FLASH_DATAFLASH=y |
| | 39 | CONFIG_PINCTRL=y |
| | 40 | CONFIG_PINCTRL_AT91=y |
| | 41 | CONFIG_DM_SERIAL=y |
| | 42 | CONFIG_DEBUG_UART_ATMEL=y |
| | 43 | CONFIG_DEBUG_UART_BASE=0xfffff200 |
| | 44 | CONFIG_DEBUG_UART_CLOCK=100000000 |
| | 45 | CONFIG_DEBUG_UART_BOARD_INIT=y |
| | 46 | CONFIG_DEBUG_UART_ANNOUNCE=y |
| | 47 | CONFIG_ATMEL_USART=y |
| | 48 | CONFIG_DM_SPI=y |
| | 49 | CONFIG_ATMEL_SPI=y |
| | 50 | CONFIG_TIMER=y |
| | 51 | CONFIG_ATMEL_PIT_TIMER=y |
| | 52 | CONFIG_USB=y |
| | 53 | CONFIG_USB_STORAGE=y |
| | 54 | CONFIG_LCD=y |
projects / people / ms / u-boot.git / blame_incremental