| | 1 | CONFIG_ARM=y |
| | 2 | # CONFIG_SPL_USE_ARCH_MEMCPY is not set |
| | 3 | # CONFIG_SPL_USE_ARCH_MEMSET is not set |
| | 4 | CONFIG_ARCH_AT91=y |
| | 5 | CONFIG_SYS_TEXT_BASE=0x72000000 |
| | 6 | CONFIG_TARGET_CORVUS=y |
| | 7 | CONFIG_SPL_GPIO_SUPPORT=y |
| | 8 | CONFIG_SPL_LIBCOMMON_SUPPORT=y |
| | 9 | CONFIG_SPL_LIBGENERIC_SUPPORT=y |
| | 10 | CONFIG_SYS_MALLOC_F_LEN=0x800 |
| | 11 | CONFIG_SPL_SERIAL_SUPPORT=y |
| | 12 | CONFIG_SPL_NAND_SUPPORT=y |
| | 13 | CONFIG_DEFAULT_DEVICE_TREE="at91sam9g45-corvus" |
| | 14 | CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9M10G45,MACH_TYPE=2066,SYS_USE_NANDFLASH" |
| | 15 | CONFIG_BOOTDELAY=3 |
| | 16 | CONFIG_USE_BOOTARGS=y |
| | 17 | CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,256k(env),256k(env_redundant),256k(spare),512k(dtb),6M(kernel)ro,-(rootfs) root=/dev/mtdblock7 rw rootfstype=jffs2" |
| | 18 | # CONFIG_DISPLAY_BOARDINFO is not set |
| | 19 | CONFIG_BOARD_EARLY_INIT_F=y |
| | 20 | CONFIG_SPL=y |
| | 21 | CONFIG_HUSH_PARSER=y |
| | 22 | CONFIG_SYS_PROMPT="U-Boot> " |
| | 23 | # CONFIG_CMD_BDI is not set |
| | 24 | CONFIG_CMD_BOOTZ=y |
| | 25 | # CONFIG_CMD_IMI is not set |
| | 26 | CONFIG_CMD_DFU=y |
| | 27 | CONFIG_CMD_GPIO=y |
| | 28 | # CONFIG_CMD_LOADS is not set |
| | 29 | CONFIG_CMD_NAND=y |
| | 30 | CONFIG_CMD_USB=y |
| | 31 | # CONFIG_CMD_SOURCE is not set |
| | 32 | # CONFIG_CMD_SETEXPR is not set |
| | 33 | CONFIG_CMD_DHCP=y |
| | 34 | CONFIG_CMD_PING=y |
| | 35 | CONFIG_CMD_MTDPARTS=y |
| | 36 | CONFIG_OF_CONTROL=y |
| | 37 | CONFIG_OF_EMBED=y |
| | 38 | CONFIG_ENV_IS_IN_NAND=y |
| | 39 | CONFIG_CLK=y |
| | 40 | CONFIG_CLK_AT91=y |
| | 41 | CONFIG_DFU_NAND=y |
| | 42 | # CONFIG_MMC is not set |
| | 43 | CONFIG_PHYLIB=y |
| | 44 | # CONFIG_SPL_DM_SERIAL is not set |
| | 45 | CONFIG_ATMEL_USART=y |
| | 46 | CONFIG_USB=y |
| | 47 | CONFIG_USB_EHCI_HCD=y |
| | 48 | CONFIG_USB_STORAGE=y |
| | 49 | CONFIG_USB_GADGET=y |
| | 50 | CONFIG_USB_GADGET_MANUFACTURER="Siemens AG" |
| | 51 | CONFIG_USB_GADGET_VENDOR_NUM=0x0908 |
| | 52 | CONFIG_USB_GADGET_PRODUCT_NUM=0x02d2 |
| | 53 | CONFIG_USB_GADGET_ATMEL_USBA=y |
| | 54 | CONFIG_USB_GADGET_DOWNLOAD=y |
| | 55 | # CONFIG_EFI_LOADER is not set |
projects / people / ms / u-boot.git / blame_incremental