| | 1 | CONFIG_ARM=y |
| | 2 | CONFIG_ARCH_AT91=y |
| | 3 | CONFIG_TARGET_SAMA5D3_XPLAINED=y |
| | 4 | CONFIG_SPL_GPIO_SUPPORT=y |
| | 5 | CONFIG_SPL_LIBCOMMON_SUPPORT=y |
| | 6 | CONFIG_SPL_LIBGENERIC_SUPPORT=y |
| | 7 | CONFIG_SYS_MALLOC_F_LEN=0x2000 |
| | 8 | CONFIG_SPL_MMC_SUPPORT=y |
| | 9 | CONFIG_SPL_SERIAL_SUPPORT=y |
| | 10 | CONFIG_SPL_DRIVERS_MISC_SUPPORT=y |
| | 11 | CONFIG_SPL_LIBDISK_SUPPORT=y |
| | 12 | CONFIG_SPL_FAT_SUPPORT=y |
| | 13 | CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d3_xplained" |
| | 14 | CONFIG_FIT=y |
| | 15 | CONFIG_SYS_EXTRA_OPTIONS="SAMA5D3,SYS_USE_MMC" |
| | 16 | CONFIG_BOOTDELAY=3 |
| | 17 | # CONFIG_DISPLAY_BOARDINFO is not set |
| | 18 | CONFIG_SPL=y |
| | 19 | CONFIG_SPL_SEPARATE_BSS=y |
| | 20 | CONFIG_HUSH_PARSER=y |
| | 21 | CONFIG_CMD_BOOTZ=y |
| | 22 | # CONFIG_CMD_IMI is not set |
| | 23 | # CONFIG_CMD_IMLS is not set |
| | 24 | # CONFIG_CMD_LOADS is not set |
| | 25 | # CONFIG_CMD_FLASH is not set |
| | 26 | CONFIG_CMD_MMC=y |
| | 27 | CONFIG_CMD_USB=y |
| | 28 | # CONFIG_CMD_FPGA is not set |
| | 29 | CONFIG_CMD_DHCP=y |
| | 30 | CONFIG_CMD_MII=y |
| | 31 | CONFIG_CMD_PING=y |
| | 32 | CONFIG_CMD_EXT4=y |
| | 33 | CONFIG_CMD_EXT4_WRITE=y |
| | 34 | CONFIG_CMD_FAT=y |
| | 35 | CONFIG_CMD_UBI=y |
| | 36 | CONFIG_OF_CONTROL=y |
| | 37 | CONFIG_SPL_OF_CONTROL=y |
| | 38 | CONFIG_OF_SPL_REMOVE_PROPS="interrupts interrupt-parent dmas dma-names" |
| | 39 | CONFIG_DM=y |
| | 40 | CONFIG_SPL_DM=y |
| | 41 | CONFIG_SPL_DM_SEQ_ALIAS=y |
| | 42 | CONFIG_CLK=y |
| | 43 | CONFIG_SPL_CLK=y |
| | 44 | CONFIG_CLK_AT91=y |
| | 45 | CONFIG_AT91_UTMI=y |
| | 46 | CONFIG_AT91_H32MX=y |
| | 47 | CONFIG_DM_GPIO=y |
| | 48 | CONFIG_AT91_GPIO=y |
| | 49 | CONFIG_DM_MMC=y |
| | 50 | CONFIG_GENERIC_ATMEL_MCI=y |
| | 51 | CONFIG_DM_ETH=y |
| | 52 | CONFIG_MACB=y |
| | 53 | CONFIG_PINCTRL=y |
| | 54 | CONFIG_SPL_PINCTRL=y |
| | 55 | CONFIG_PINCTRL_AT91=y |
| | 56 | CONFIG_DM_SERIAL=y |
| | 57 | CONFIG_DEBUG_UART=y |
| | 58 | CONFIG_DEBUG_UART_ATMEL=y |
| | 59 | CONFIG_DEBUG_UART_BASE=0xffffee00 |
| | 60 | CONFIG_DEBUG_UART_CLOCK=132000000 |
| | 61 | CONFIG_DEBUG_UART_BOARD_INIT=y |
| | 62 | CONFIG_DEBUG_UART_ANNOUNCE=y |
| | 63 | CONFIG_ATMEL_USART=y |
| | 64 | CONFIG_USB=y |
| | 65 | CONFIG_DM_USB=y |
| | 66 | CONFIG_USB_EHCI_HCD=y |
| | 67 | CONFIG_USB_STORAGE=y |
projects / people / ms / u-boot.git / blame_incremental