| | 1 | /* |
| | 2 | * Copyright (C) 2011 |
| | 3 | * Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net> |
| | 4 | * |
| | 5 | * Based on Kirkwood support: |
| | 6 | * (C) Copyright 2009 |
| | 7 | * Marvell Semiconductor <www.marvell.com> |
| | 8 | * Written-by: Prafulla Wadaskar <prafulla@marvell.com> |
| | 9 | * |
| | 10 | * SPDX-License-Identifier: GPL-2.0+ |
| | 11 | */ |
| | 12 | |
| | 13 | #ifndef _CONFIG_DNS325_H |
| | 14 | #define _CONFIG_DNS325_H |
| | 15 | |
| | 16 | /* |
| | 17 | * Machine number definition |
| | 18 | */ |
| | 19 | #define MACH_TYPE_DNS325 3800 |
| | 20 | #define CONFIG_MACH_TYPE MACH_TYPE_DNS325 |
| | 21 | #define CONFIG_IDENT_STRING "\nD-Link DNS-325" |
| | 22 | |
| | 23 | /* |
| | 24 | * High Level Configuration Options (easy to change) |
| | 25 | */ |
| | 26 | #define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */ |
| | 27 | #define CONFIG_KW88F6281 /* SOC Name */ |
| | 28 | #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ |
| | 29 | |
| | 30 | /* |
| | 31 | * Commands configuration |
| | 32 | */ |
| | 33 | #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ |
| | 34 | #define CONFIG_CMD_DHCP |
| | 35 | #define CONFIG_CMD_ENV |
| | 36 | #define CONFIG_CMD_NAND |
| | 37 | #define CONFIG_CMD_PING |
| | 38 | #define CONFIG_CMD_USB |
| | 39 | #define CONFIG_CMD_IDE |
| | 40 | #define CONFIG_CMD_DATE |
| | 41 | #define CONFIG_SYS_MVFS |
| | 42 | |
| | 43 | #define CONFIG_NR_DRAM_BANKS 1 |
| | 44 | |
| | 45 | /* |
| | 46 | * mv-common.h should be defined after CMD configs since it used them |
| | 47 | * to enable certain macros |
| | 48 | */ |
| | 49 | #include "mv-common.h" |
| | 50 | |
| | 51 | /* Remove or override few declarations from mv-common.h */ |
| | 52 | #undef CONFIG_SYS_PROMPT |
| | 53 | |
| | 54 | /* |
| | 55 | * Ethernet Driver configuration |
| | 56 | */ |
| | 57 | #ifdef CONFIG_CMD_NET |
| | 58 | #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ |
| | 59 | #define CONFIG_NETCONSOLE |
| | 60 | #endif |
| | 61 | |
| | 62 | /* |
| | 63 | * SATA Driver configuration |
| | 64 | */ |
| | 65 | #ifdef CONFIG_MVSATA_IDE |
| | 66 | #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET |
| | 67 | #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET |
| | 68 | #endif |
| | 69 | |
| | 70 | /* |
| | 71 | * RTC driver configuration |
| | 72 | */ |
| | 73 | #ifdef CONFIG_CMD_DATE |
| | 74 | #define CONFIG_RTC_MV |
| | 75 | #endif |
| | 76 | |
| | 77 | /* |
| | 78 | * Enable GPI0 support |
| | 79 | */ |
| | 80 | #define CONFIG_KIRKWOOD_GPIO |
| | 81 | |
| | 82 | /* |
| | 83 | * Use the HUSH parser |
| | 84 | */ |
| | 85 | #define CONFIG_SYS_HUSH_PARSER |
| | 86 | |
| | 87 | /* |
| | 88 | * Console configuration |
| | 89 | */ |
| | 90 | #define CONFIG_CONSOLE_MUX |
| | 91 | #define CONFIG_SYS_CONSOLE_IS_IN_ENV |
| | 92 | |
| | 93 | /* |
| | 94 | * Display cpu info at boot |
| | 95 | */ |
| | 96 | #define CONFIG_DISPLAY_CPUINFO |
| | 97 | |
| | 98 | /* |
| | 99 | * Environment variables configurations |
| | 100 | */ |
| | 101 | #ifdef CONFIG_CMD_NAND |
| | 102 | #define CONFIG_ENV_IS_IN_NAND |
| | 103 | #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128KB */ |
| | 104 | #else |
| | 105 | #define CONFIG_ENV_IS_NOWHERE |
| | 106 | #endif |
| | 107 | |
| | 108 | #define CONFIG_ENV_SIZE 0x20000 /* 128KB */ |
| | 109 | #define CONFIG_ENV_ADDR 0xe0000 |
| | 110 | #define CONFIG_ENV_OFFSET 0xe0000 /* env starts here */ |
| | 111 | |
| | 112 | /* |
| | 113 | * Default environment variables |
| | 114 | */ |
| | 115 | #define MTDIDS_DEFAULT "nand0=orion_nand" |
| | 116 | |
| | 117 | #define MTDPARTS_DEFAULT "mtdparts=orion_nand:" \ |
| | 118 | "896k(u-boot),128k(u-boot-env),5m(kernel),-(rootfs)\0" |
| | 119 | |
| | 120 | #define CONFIG_EXTRA_ENV_SETTINGS \ |
| | 121 | "stdin=serial\0" \ |
| | 122 | "stdout=serial\0" \ |
| | 123 | "stderr=serial\0" \ |
| | 124 | "loadaddr=0x800000\0" \ |
| | 125 | "autoload=no\0" \ |
| | 126 | "console=ttyS0,115200\0" \ |
| | 127 | "mtdparts="MTDPARTS_DEFAULT \ |
| | 128 | "optargs=\0" \ |
| | 129 | "bootenv=uEnv.txt\0" \ |
| | 130 | "importbootenv=echo Importing environment ...; " \ |
| | 131 | "env import -t ${loadaddr} ${filesize}\0" \ |
| | 132 | "loadbootenv=fatload usb 0 ${loadaddr} ${bootenv}\0" \ |
| | 133 | "setbootargs=setenv bootargs console=${console} " \ |
| | 134 | "${optargs} " \ |
| | 135 | "${mtdparts} " \ |
| | 136 | "root=${bootenvroot} " \ |
| | 137 | "rootfstype=${bootenvrootfstype}\0" \ |
| | 138 | "subbootcmd=run setbootargs; " \ |
| | 139 | "if run bootenvloadimage; then " \ |
| | 140 | "bootm ${loadaddr};" \ |
| | 141 | "fi;\0" \ |
| | 142 | "nandroot=ubi0:rootfs ubi.mtd=rootfs\0" \ |
| | 143 | "nandrootfstype=ubifs\0" \ |
| | 144 | "nandloadimage=nand read ${loadaddr} kernel\0" \ |
| | 145 | "setnandbootenv=echo Booting from nand ...; " \ |
| | 146 | "setenv bootenvroot ${nandroot}; " \ |
| | 147 | "setenv bootenvrootfstype ${nandrootfstype}; " \ |
| | 148 | "setenv bootenvloadimage ${nandloadimage}\0" |
| | 149 | |
| | 150 | #define CONFIG_BOOTCOMMAND \ |
| | 151 | "if test -n ${bootenv} && usb start; then " \ |
| | 152 | "if run loadbootenv; then " \ |
| | 153 | "echo Loaded environment ${bootenv} from usb;" \ |
| | 154 | "run importbootenv;" \ |
| | 155 | "fi;" \ |
| | 156 | "if test -n ${bootenvcmd}; then " \ |
| | 157 | "echo Running bootenvcmd ...;" \ |
| | 158 | "run bootenvcmd;" \ |
| | 159 | "fi;" \ |
| | 160 | "fi;" \ |
| | 161 | "run setnandbootenv subbootcmd;" |
| | 162 | |
| | 163 | #endif /* _CONFIG_DNS325_H */ |
projects / people / ms / u-boot.git / blame_incremental