[people/ms/u-boot.git] / include / configs / xilinx_zynqmp.h

/*
 * Configuration for Xilinx ZynqMP
 * (C) Copyright 2014 - 2015 Xilinx, Inc.
 * Michal Simek <michal.simek@xilinx.com>
 *
 * Based on Configuration for Versatile Express
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __XILINX_ZYNQMP_H
#define __XILINX_ZYNQMP_H

#define CONFIG_REMAKE_ELF

/* #define CONFIG_ARMV8_SWITCH_TO_EL1 */

#define CONFIG_SYS_NO_FLASH


/* Generic Interrupt Controller Definitions */
#define CONFIG_GICV2
#define GICD_BASE	0xF9010000
#define GICC_BASE	0xF9020000

#define CONFIG_SYS_ALT_MEMTEST
#define CONFIG_SYS_MEMTEST_SCRATCH	0xfffc0000

#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
#define CONFIG_SYS_MEMTEST_END		CONFIG_SYS_SDRAM_SIZE

/* Have release address at the end of 256MB for now */
#define CPU_RELEASE_ADDR	0xFFFFFF0

/* Cache Definitions */
#define CONFIG_SYS_CACHELINE_SIZE	64

#if !defined(CONFIG_IDENT_STRING)
# define CONFIG_IDENT_STRING		" Xilinx ZynqMP"
#endif

#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x7fff0)

/* Flat Device Tree Definitions */

/* Generic Timer Definitions - setup in EL3. Setup by ATF for other cases */
#if !defined(COUNTER_FREQUENCY)
# define COUNTER_FREQUENCY		100000000
#endif

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 0x2000000)

/* Serial setup */
#define CONFIG_ARM_DCC
#define CONFIG_CPU_ARMV8
#define CONFIG_ZYNQ_SERIAL

#define CONFIG_CONS_INDEX		0
#define CONFIG_BAUDRATE			115200
#define CONFIG_SYS_BAUDRATE_TABLE \
	{ 4800, 9600, 19200, 38400, 57600, 115200 }

/* Command line configuration */
#define CONFIG_CMD_ENV
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_EXT4
#define CONFIG_CMD_FAT
#define CONFIG_CMD_FS_GENERIC
#define CONFIG_DOS_PARTITION
#define CONFIG_MP

#define CONFIG_CMD_MII

/* BOOTP options */
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME
#define CONFIG_BOOTP_MAY_FAIL
#define CONFIG_BOOTP_SERVERIP

/* SPI */
#ifdef CONFIG_ZYNQ_SPI
# define CONFIG_CMD_SF
#endif

#if defined(CONFIG_ZYNQ_SDHCI)
# define CONFIG_MMC
# define CONFIG_GENERIC_MMC
# define CONFIG_SDHCI
# define CONFIG_CMD_MMC
# ifndef CONFIG_ZYNQ_SDHCI_MAX_FREQ
#  define CONFIG_ZYNQ_SDHCI_MAX_FREQ	200000000
# endif
# define CONFIG_FAT_WRITE
# define CONFIG_CMD_EXT4_WRITE
#endif

#ifdef CONFIG_NAND_ARASAN
# define CONFIG_CMD_NAND
# define CONFIG_CMD_NAND_LOCK_UNLOCK
# define CONFIG_SYS_MAX_NAND_DEVICE	1
# define CONFIG_SYS_NAND_SELF_INIT
# define CONFIG_SYS_NAND_ONFI_DETECTION
# define CONFIG_MTD_DEVICE
#endif

/* Miscellaneous configurable options */
#define CONFIG_SYS_LOAD_ADDR		0x8000000

#if defined(CONFIG_ZYNQMP_USB)
#define CONFIG_USB_XHCI_DWC3
#define CONFIG_USB_XHCI
#define CONFIG_USB_MAX_CONTROLLER_COUNT         1
#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS      2
#define CONFIG_CMD_USB
#define CONFIG_USB_STORAGE
#define CONFIG_USB_XHCI_ZYNQMP

#define CONFIG_USB_DWC3
#define CONFIG_USB_DWC3_GADGET

#define CONFIG_USB_GADGET
#define CONFIG_USB_GADGET_DOWNLOAD
#define CONFIG_USB_GADGET_DUALSPEED
#define CONFIG_USB_GADGET_VBUS_DRAW	2
#define CONFIG_USBDOWNLOAD_GADGET
#define CONFIG_SYS_DFU_DATA_BUF_SIZE	0x1800000
#define DFU_DEFAULT_POLL_TIMEOUT	300
#define CONFIG_USB_FUNCTION_DFU
#define CONFIG_DFU_RAM
#define CONFIG_G_DNL_VENDOR_NUM		0x03FD
#define CONFIG_G_DNL_PRODUCT_NUM	0x0300
#define CONFIG_G_DNL_MANUFACTURER	"Xilinx"
#define CONFIG_USB_CABLE_CHECK
#define CONFIG_CMD_DFU
#define CONFIG_CMD_THOR_DOWNLOAD
#define CONFIG_USB_FUNCTION_THOR
#define CONFIG_THOR_RESET_OFF
#define DFU_ALT_INFO_RAM \
	"dfu_ram_info=" \
	"setenv dfu_alt_info " \
	"Image ram $kernel_addr $kernel_size\\\\;" \
	"system.dtb ram $fdt_addr $fdt_size\0" \
	"dfu_ram=run dfu_ram_info && dfu 0 ram 0\0" \
	"thor_ram=run dfu_ram_info && thordown 0 ram 0\0"

#define DFU_ALT_INFO  \
		DFU_ALT_INFO_RAM
#endif

#if !defined(DFU_ALT_INFO)
# define DFU_ALT_INFO
#endif

/* Initial environment variables */
#define CONFIG_EXTRA_ENV_SETTINGS \
	"kernel_addr=0x80000\0" \
	"fdt_addr=0x7000000\0" \
	"fdt_high=0x10000000\0" \
	"kernel_size=0x2000000\0" \
	"fdt_size=0x80000\0" \
	"sdbootdev=0\0"\
	"sdboot=mmc dev $sdbootdev && mmcinfo && load mmc $sdbootdev:$partid $fdt_addr system.dtb && " \
		"load mmc $sdbootdev:$partid $kernel_addr Image && " \
		"booti $kernel_addr - $fdt_addr\0" \
	DFU_ALT_INFO

#define CONFIG_PREBOOT		"run bootargs"
#define CONFIG_BOOTCOMMAND	"run $modeboot"
#define CONFIG_BOOTDELAY	5

#define CONFIG_BOARD_LATE_INIT

/* Do not preserve environment */
#define CONFIG_ENV_IS_NOWHERE		1
#define CONFIG_ENV_SIZE			0x1000

/* Monitor Command Prompt */
/* Console I/O Buffer Size */
#define CONFIG_SYS_CBSIZE		2048
#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
					sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
#define CONFIG_SYS_LONGHELP
#define CONFIG_CMDLINE_EDITING
#define CONFIG_SYS_MAXARGS		64

/* Ethernet driver */
#if defined(CONFIG_ZYNQ_GEM)
# define CONFIG_NET_MULTI
# define CONFIG_MII
# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
# define CONFIG_PHY_MARVELL
# define CONFIG_PHY_NATSEMI
# define CONFIG_PHY_TI
# define CONFIG_PHY_GIGE
# define PHY_ANEG_TIMEOUT       20000
#endif

/* I2C */
#if defined(CONFIG_SYS_I2C_ZYNQ)
# define CONFIG_CMD_I2C
# define CONFIG_SYS_I2C
# define CONFIG_SYS_I2C_ZYNQ_SPEED		100000
# define CONFIG_SYS_I2C_ZYNQ_SLAVE		0
#endif

/* EEPROM */
#ifdef CONFIG_ZYNQMP_EEPROM
# define CONFIG_CMD_EEPROM
# define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		2
# define CONFIG_SYS_I2C_EEPROM_ADDR		0x54
# define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4
# define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5
# define CONFIG_SYS_EEPROM_SIZE			(64 * 1024)
#endif

#ifdef CONFIG_AHCI
#define CONFIG_LIBATA
#define CONFIG_SCSI_AHCI
#define CONFIG_SCSI_AHCI_PLAT
#define CONFIG_SYS_SCSI_MAX_SCSI_ID	1
#define CONFIG_SYS_SCSI_MAX_LUN		1
#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
					 CONFIG_SYS_SCSI_MAX_LUN)
#define CONFIG_CMD_SCSI
#endif

#define CONFIG_SYS_BOOTM_LEN	(60 * 1024 * 1024)

#define CONFIG_CMD_BOOTI
#define CONFIG_CMD_UNZIP

#define CONFIG_BOARD_EARLY_INIT_R
#define CONFIG_CLOCKS

#endif /* __XILINX_ZYNQMP_H */
Commit	Line	Data
	1	/*
	2	* Configuration for Xilinx ZynqMP
	3	* (C) Copyright 2014 - 2015 Xilinx, Inc.
	4	* Michal Simek <michal.simek@xilinx.com>
	5	*
	6	* Based on Configuration for Versatile Express
	7	*
	8	* SPDX-License-Identifier: GPL-2.0+
	9	*/
	10
	11	#ifndef __XILINX_ZYNQMP_H
	12	#define __XILINX_ZYNQMP_H
	13
	14	#define CONFIG_REMAKE_ELF
	15
	16	/* #define CONFIG_ARMV8_SWITCH_TO_EL1 */
	17
	18	#define CONFIG_SYS_NO_FLASH
	19
	20
	21	/* Generic Interrupt Controller Definitions */
	22	#define CONFIG_GICV2
	23	#define GICD_BASE 0xF9010000
	24	#define GICC_BASE 0xF9020000
	25
	26	#define CONFIG_SYS_ALT_MEMTEST
	27	#define CONFIG_SYS_MEMTEST_SCRATCH 0xfffc0000
	28
	29	#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
	30	#define CONFIG_SYS_MEMTEST_END CONFIG_SYS_SDRAM_SIZE
	31
	32	/* Have release address at the end of 256MB for now */
	33	#define CPU_RELEASE_ADDR 0xFFFFFF0
	34
	35	/* Cache Definitions */
	36	#define CONFIG_SYS_CACHELINE_SIZE 64
	37
	38	#if !defined(CONFIG_IDENT_STRING)
	39	# define CONFIG_IDENT_STRING " Xilinx ZynqMP"
	40	#endif
	41
	42	#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
	43
	44	/* Flat Device Tree Definitions */
	45
	46	/* Generic Timer Definitions - setup in EL3. Setup by ATF for other cases */
	47	#if !defined(COUNTER_FREQUENCY)
	48	# define COUNTER_FREQUENCY 100000000
	49	#endif
	50
	51	/* Size of malloc() pool */
	52	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 0x2000000)
	53
	54	/* Serial setup */
	55	#define CONFIG_ARM_DCC
	56	#define CONFIG_CPU_ARMV8
	57	#define CONFIG_ZYNQ_SERIAL
	58
	59	#define CONFIG_CONS_INDEX 0
	60	#define CONFIG_BAUDRATE 115200
	61	#define CONFIG_SYS_BAUDRATE_TABLE \
	62	{ 4800, 9600, 19200, 38400, 57600, 115200 }
	63
	64	/* Command line configuration */
	65	#define CONFIG_CMD_ENV
	66	#define CONFIG_CMD_EXT2
	67	#define CONFIG_CMD_EXT4
	68	#define CONFIG_CMD_FAT
	69	#define CONFIG_CMD_FS_GENERIC
	70	#define CONFIG_DOS_PARTITION
	71	#define CONFIG_MP
	72
	73	#define CONFIG_CMD_MII
	74
	75	/* BOOTP options */
	76	#define CONFIG_BOOTP_BOOTFILESIZE
	77	#define CONFIG_BOOTP_BOOTPATH
	78	#define CONFIG_BOOTP_GATEWAY
	79	#define CONFIG_BOOTP_HOSTNAME
	80	#define CONFIG_BOOTP_MAY_FAIL
	81	#define CONFIG_BOOTP_SERVERIP
	82
	83	/* SPI */
	84	#ifdef CONFIG_ZYNQ_SPI
	85	# define CONFIG_CMD_SF
	86	#endif
	87
	88	#if defined(CONFIG_ZYNQ_SDHCI)
	89	# define CONFIG_MMC
	90	# define CONFIG_GENERIC_MMC
	91	# define CONFIG_SDHCI
	92	# define CONFIG_CMD_MMC
	93	# ifndef CONFIG_ZYNQ_SDHCI_MAX_FREQ
	94	# define CONFIG_ZYNQ_SDHCI_MAX_FREQ 200000000
	95	# endif
	96	# define CONFIG_FAT_WRITE
	97	# define CONFIG_CMD_EXT4_WRITE
	98	#endif
	99
	100	#ifdef CONFIG_NAND_ARASAN
	101	# define CONFIG_CMD_NAND
	102	# define CONFIG_CMD_NAND_LOCK_UNLOCK
	103	# define CONFIG_SYS_MAX_NAND_DEVICE 1
	104	# define CONFIG_SYS_NAND_SELF_INIT
	105	# define CONFIG_SYS_NAND_ONFI_DETECTION
	106	# define CONFIG_MTD_DEVICE
	107	#endif
	108
	109	/* Miscellaneous configurable options */
	110	#define CONFIG_SYS_LOAD_ADDR 0x8000000
	111
	112	#if defined(CONFIG_ZYNQMP_USB)
	113	#define CONFIG_USB_XHCI_DWC3
	114	#define CONFIG_USB_XHCI
	115	#define CONFIG_USB_MAX_CONTROLLER_COUNT 1
	116	#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2
	117	#define CONFIG_CMD_USB
	118	#define CONFIG_USB_STORAGE
	119	#define CONFIG_USB_XHCI_ZYNQMP
	120
	121	#define CONFIG_USB_DWC3
	122	#define CONFIG_USB_DWC3_GADGET
	123
	124	#define CONFIG_USB_GADGET
	125	#define CONFIG_USB_GADGET_DOWNLOAD
	126	#define CONFIG_USB_GADGET_DUALSPEED
	127	#define CONFIG_USB_GADGET_VBUS_DRAW 2
	128	#define CONFIG_USBDOWNLOAD_GADGET
	129	#define CONFIG_SYS_DFU_DATA_BUF_SIZE 0x1800000
	130	#define DFU_DEFAULT_POLL_TIMEOUT 300
	131	#define CONFIG_USB_FUNCTION_DFU
	132	#define CONFIG_DFU_RAM
	133	#define CONFIG_G_DNL_VENDOR_NUM 0x03FD
	134	#define CONFIG_G_DNL_PRODUCT_NUM 0x0300
	135	#define CONFIG_G_DNL_MANUFACTURER "Xilinx"
	136	#define CONFIG_USB_CABLE_CHECK
	137	#define CONFIG_CMD_DFU
	138	#define CONFIG_CMD_THOR_DOWNLOAD
	139	#define CONFIG_USB_FUNCTION_THOR
	140	#define CONFIG_THOR_RESET_OFF
	141	#define DFU_ALT_INFO_RAM \
	142	"dfu_ram_info=" \
	143	"setenv dfu_alt_info " \
	144	"Image ram $kernel_addr $kernel_size\\\\;" \
	145	"system.dtb ram $fdt_addr $fdt_size\0" \
	146	"dfu_ram=run dfu_ram_info && dfu 0 ram 0\0" \
	147	"thor_ram=run dfu_ram_info && thordown 0 ram 0\0"
	148
	149	#define DFU_ALT_INFO \
	150	DFU_ALT_INFO_RAM
	151	#endif
	152
	153	#if !defined(DFU_ALT_INFO)
	154	# define DFU_ALT_INFO
	155	#endif
	156
	157	/* Initial environment variables */
	158	#define CONFIG_EXTRA_ENV_SETTINGS \
	159	"kernel_addr=0x80000\0" \
	160	"fdt_addr=0x7000000\0" \
	161	"fdt_high=0x10000000\0" \
	162	"kernel_size=0x2000000\0" \
	163	"fdt_size=0x80000\0" \
	164	"sdbootdev=0\0"\
	165	"sdboot=mmc dev $sdbootdev && mmcinfo && load mmc $sdbootdev:$partid $fdt_addr system.dtb && " \
	166	"load mmc $sdbootdev:$partid $kernel_addr Image && " \
	167	"booti $kernel_addr - $fdt_addr\0" \
	168	DFU_ALT_INFO
	169
	170	#define CONFIG_PREBOOT "run bootargs"
	171	#define CONFIG_BOOTCOMMAND "run $modeboot"
	172	#define CONFIG_BOOTDELAY 5
	173
	174	#define CONFIG_BOARD_LATE_INIT
	175
	176	/* Do not preserve environment */
	177	#define CONFIG_ENV_IS_NOWHERE 1
	178	#define CONFIG_ENV_SIZE 0x1000
	179
	180	/* Monitor Command Prompt */
	181	/* Console I/O Buffer Size */
	182	#define CONFIG_SYS_CBSIZE 2048
	183	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
	184	sizeof(CONFIG_SYS_PROMPT) + 16)
	185	#define CONFIG_SYS_HUSH_PARSER
	186	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
	187	#define CONFIG_SYS_LONGHELP
	188	#define CONFIG_CMDLINE_EDITING
	189	#define CONFIG_SYS_MAXARGS 64
	190
	191	/* Ethernet driver */
	192	#if defined(CONFIG_ZYNQ_GEM)
	193	# define CONFIG_NET_MULTI
	194	# define CONFIG_MII
	195	# define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
	196	# define CONFIG_PHY_MARVELL
	197	# define CONFIG_PHY_NATSEMI
	198	# define CONFIG_PHY_TI
	199	# define CONFIG_PHY_GIGE
	200	# define PHY_ANEG_TIMEOUT 20000
	201	#endif
	202
	203	/* I2C */
	204	#if defined(CONFIG_SYS_I2C_ZYNQ)
	205	# define CONFIG_CMD_I2C
	206	# define CONFIG_SYS_I2C
	207	# define CONFIG_SYS_I2C_ZYNQ_SPEED 100000
	208	# define CONFIG_SYS_I2C_ZYNQ_SLAVE 0
	209	#endif
	210
	211	/* EEPROM */
	212	#ifdef CONFIG_ZYNQMP_EEPROM
	213	# define CONFIG_CMD_EEPROM
	214	# define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
	215	# define CONFIG_SYS_I2C_EEPROM_ADDR 0x54
	216	# define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4
	217	# define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
	218	# define CONFIG_SYS_EEPROM_SIZE (64 * 1024)
	219	#endif
	220
	221	#ifdef CONFIG_AHCI
	222	#define CONFIG_LIBATA
	223	#define CONFIG_SCSI_AHCI
	224	#define CONFIG_SCSI_AHCI_PLAT
	225	#define CONFIG_SYS_SCSI_MAX_SCSI_ID 1
	226	#define CONFIG_SYS_SCSI_MAX_LUN 1
	227	#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
	228	CONFIG_SYS_SCSI_MAX_LUN)
	229	#define CONFIG_CMD_SCSI
	230	#endif
	231
	232	#define CONFIG_SYS_BOOTM_LEN (60 * 1024 * 1024)
	233
	234	#define CONFIG_CMD_BOOTI
	235	#define CONFIG_CMD_UNZIP
	236
	237	#define CONFIG_BOARD_EARLY_INIT_R
	238	#define CONFIG_CLOCKS
	239
	240	#endif /* __XILINX_ZYNQMP_H */