Makefile

   1 #
   2 # (C) Copyright 2000-2013
   3 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4 #
   5 # SPDX-License-Identifier:      GPL-2.0+
   6 #
   7
   8 VERSION = 2014
   9 PATCHLEVEL = 04
  10 SUBLEVEL =
  11 EXTRAVERSION = -rc1
  12 NAME =
  13
  14 # *DOCUMENTATION*
  15 # To see a list of typical targets execute "make help"
  16 # More info can be located in ./README
  17 # Comments in this file are targeted only to the developer, do not
  18 # expect to learn how to build the kernel reading this file.
  19
  20 # Do not:
  21 # o  use make's built-in rules and variables
  22 #    (this increases performance and avoids hard-to-debug behaviour);
  23 # o  print "Entering directory ...";
  24 MAKEFLAGS += -rR --no-print-directory
  25
  26 # Avoid funny character set dependencies
  27 unexport LC_ALL
  28 LC_COLLATE=C
  29 LC_NUMERIC=C
  30 export LC_COLLATE LC_NUMERIC
  31
  32 # We are using a recursive build, so we need to do a little thinking
  33 # to get the ordering right.
  34 #
  35 # Most importantly: sub-Makefiles should only ever modify files in
  36 # their own directory. If in some directory we have a dependency on
  37 # a file in another dir (which doesn't happen often, but it's often
  38 # unavoidable when linking the built-in.o targets which finally
  39 # turn into vmlinux), we will call a sub make in that other dir, and
  40 # after that we are sure that everything which is in that other dir
  41 # is now up to date.
  42 #
  43 # The only cases where we need to modify files which have global
  44 # effects are thus separated out and done before the recursive
  45 # descending is started. They are now explicitly listed as the
  46 # prepare rule.
  47
  48 # To put more focus on warnings, be less verbose as default
  49 # Use 'make V=1' to see the full commands
  50
  51 ifeq ("$(origin V)", "command line")
  52   KBUILD_VERBOSE = $(V)
  53 endif
  54 ifndef KBUILD_VERBOSE
  55   KBUILD_VERBOSE = 0
  56 endif
  57
  58 # Call a source code checker (by default, "sparse") as part of the
  59 # C compilation.
  60 #
  61 # Use 'make C=1' to enable checking of only re-compiled files.
  62 # Use 'make C=2' to enable checking of *all* source files, regardless
  63 # of whether they are re-compiled or not.
  64 #
  65 # See the file "Documentation/sparse.txt" for more details, including
  66 # where to get the "sparse" utility.
  67
  68 ifeq ("$(origin C)", "command line")
  69   KBUILD_CHECKSRC = $(C)
  70 endif
  71 ifndef KBUILD_CHECKSRC
  72   KBUILD_CHECKSRC = 0
  73 endif
  74
  75 # Use make M=dir to specify directory of external module to build
  76 # Old syntax make ... SUBDIRS=$PWD is still supported
  77 # Setting the environment variable KBUILD_EXTMOD take precedence
  78 ifdef SUBDIRS
  79   KBUILD_EXTMOD ?= $(SUBDIRS)
  80 endif
  81
  82 ifeq ("$(origin M)", "command line")
  83   KBUILD_EXTMOD := $(M)
  84 endif
  85
  86 # kbuild supports saving output files in a separate directory.
  87 # To locate output files in a separate directory two syntaxes are supported.
  88 # In both cases the working directory must be the root of the kernel src.
  89 # 1) O=
  90 # Use "make O=dir/to/store/output/files/"
  91 #
  92 # 2) Set KBUILD_OUTPUT
  93 # Set the environment variable KBUILD_OUTPUT to point to the directory
  94 # where the output files shall be placed.
  95 # export KBUILD_OUTPUT=dir/to/store/output/files/
  96 # make
  97 #
  98 # The O= assignment takes precedence over the KBUILD_OUTPUT environment
  99 # variable.
 100
 101
 102 # KBUILD_SRC is set on invocation of make in OBJ directory
 103 # KBUILD_SRC is not intended to be used by the regular user (for now)
 104 ifeq ($(KBUILD_SRC),)
 105
 106 # OK, Make called in directory where kernel src resides
 107 # Do we want to locate output files in a separate directory?
 108 ifeq ("$(origin O)", "command line")
 109   KBUILD_OUTPUT := $(O)
 110 endif
 111
 112 ifeq ("$(origin W)", "command line")
 113   export KBUILD_ENABLE_EXTRA_GCC_CHECKS := $(W)
 114 endif
 115
 116 # That's our default target when none is given on the command line
 117 PHONY := _all
 118 _all:
 119
 120 # Cancel implicit rules on top Makefile
 121 $(CURDIR)/Makefile Makefile: ;
 122
 123 ifneq ($(KBUILD_OUTPUT),)
 124 # Invoke a second make in the output directory, passing relevant variables
 125 # check that the output directory actually exists
 126 saved-output := $(KBUILD_OUTPUT)
 127 KBUILD_OUTPUT := $(shell cd $(KBUILD_OUTPUT) && /bin/pwd)
 128 $(if $(KBUILD_OUTPUT),, \
 129      $(error output directory "$(saved-output)" does not exist))
 130
 131 PHONY += $(MAKECMDGOALS) sub-make
 132
 133 $(filter-out _all sub-make $(CURDIR)/Makefile, $(MAKECMDGOALS)) _all: sub-make
 134         @:
 135
 136 sub-make: FORCE
 137         $(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \
 138         KBUILD_SRC=$(CURDIR) \
 139         KBUILD_EXTMOD="$(KBUILD_EXTMOD)" -f $(CURDIR)/Makefile \
 140         $(filter-out _all sub-make,$(MAKECMDGOALS))
 141
 142 # Leave processing to above invocation of make
 143 skip-makefile := 1
 144 endif # ifneq ($(KBUILD_OUTPUT),)
 145 endif # ifeq ($(KBUILD_SRC),)
 146
 147 # We process the rest of the Makefile if this is the final invocation of make
 148 ifeq ($(skip-makefile),)
 149
 150 # If building an external module we do not care about the all: rule
 151 # but instead _all depend on modules
 152 PHONY += all
 153 ifeq ($(KBUILD_EXTMOD),)
 154 _all: all
 155 else
 156 _all: modules
 157 endif
 158
 159 srctree         := $(if $(KBUILD_SRC),$(KBUILD_SRC),$(CURDIR))
 160 objtree         := $(CURDIR)
 161 src             := $(srctree)
 162 obj             := $(objtree)
 163
 164 VPATH           := $(srctree)$(if $(KBUILD_EXTMOD),:$(KBUILD_EXTMOD))
 165
 166 export srctree objtree VPATH
 167
 168 OBJTREE         := $(objtree)
 169 SPLTREE         := $(OBJTREE)/spl
 170 TPLTREE         := $(OBJTREE)/tpl
 171 SRCTREE         := $(srctree)
 172 TOPDIR          := $(SRCTREE)
 173 export  TOPDIR SRCTREE OBJTREE SPLTREE TPLTREE
 174
 175 MKCONFIG        := $(SRCTREE)/mkconfig
 176 export MKCONFIG
 177
 178 # Make sure CDPATH settings don't interfere
 179 unexport CDPATH
 180
 181 #########################################################################
 182
 183 HOSTARCH := $(shell uname -m | \
 184         sed -e s/i.86/x86/ \
 185             -e s/sun4u/sparc64/ \
 186             -e s/arm.*/arm/ \
 187             -e s/sa110/arm/ \
 188             -e s/ppc64/powerpc/ \
 189             -e s/ppc/powerpc/ \
 190             -e s/macppc/powerpc/\
 191             -e s/sh.*/sh/)
 192
 193 HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \
 194             sed -e 's/\(cygwin\).*/cygwin/')
 195
 196 export  HOSTARCH HOSTOS
 197
 198 # Deal with colliding definitions from tcsh etc.
 199 VENDOR=
 200
 201 #########################################################################
 202
 203 # set default to nothing for native builds
 204 ifeq ($(HOSTARCH),$(ARCH))
 205 CROSS_COMPILE ?=
 206 endif
 207
 208 # SHELL used by kbuild
 209 CONFIG_SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
 210           else if [ -x /bin/bash ]; then echo /bin/bash; \
 211           else echo sh; fi ; fi)
 212
 213 HOSTCC       = gcc
 214 HOSTCFLAGS   = -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer
 215
 216 ifeq ($(HOSTOS),cygwin)
 217 HOSTCFLAGS      += -ansi
 218 endif
 219
 220 # Mac OS X / Darwin's C preprocessor is Apple specific.  It
 221 # generates numerous errors and warnings.  We want to bypass it
 222 # and use GNU C's cpp.  To do this we pass the -traditional-cpp
 223 # option to the compiler.  Note that the -traditional-cpp flag
 224 # DOES NOT have the same semantics as GNU C's flag, all it does
 225 # is invoke the GNU preprocessor in stock ANSI/ISO C fashion.
 226 #
 227 # Apple's linker is similar, thanks to the new 2 stage linking
 228 # multiple symbol definitions are treated as errors, hence the
 229 # -multiply_defined suppress option to turn off this error.
 230 #
 231 ifeq ($(HOSTOS),darwin)
 232 # get major and minor product version (e.g. '10' and '6' for Snow Leopard)
 233 DARWIN_MAJOR_VERSION    = $(shell sw_vers -productVersion | cut -f 1 -d '.')
 234 DARWIN_MINOR_VERSION    = $(shell sw_vers -productVersion | cut -f 2 -d '.')
 235
 236 os_x_before     = $(shell if [ $(DARWIN_MAJOR_VERSION) -le $(1) -a \
 237         $(DARWIN_MINOR_VERSION) -le $(2) ] ; then echo "$(3)"; else echo "$(4)"; fi ;)
 238
 239 # Snow Leopards build environment has no longer restrictions as described above
 240 HOSTCC       = $(call os_x_before, 10, 5, "cc", "gcc")
 241 HOSTCFLAGS  += $(call os_x_before, 10, 4, "-traditional-cpp")
 242 HOSTLDFLAGS += $(call os_x_before, 10, 5, "-multiply_defined suppress")
 243 endif
 244
 245 # Decide whether to build built-in, modular, or both.
 246 # Normally, just do built-in.
 247
 248 KBUILD_MODULES :=
 249 KBUILD_BUILTIN := 1
 250
 251 #       If we have only "make modules", don't compile built-in objects.
 252 #       When we're building modules with modversions, we need to consider
 253 #       the built-in objects during the descend as well, in order to
 254 #       make sure the checksums are up to date before we record them.
 255
 256 ifeq ($(MAKECMDGOALS),modules)
 257   KBUILD_BUILTIN := $(if $(CONFIG_MODVERSIONS),1)
 258 endif
 259
 260 #       If we have "make <whatever> modules", compile modules
 261 #       in addition to whatever we do anyway.
 262 #       Just "make" or "make all" shall build modules as well
 263
 264 # U-Boot does not need modules
 265 #ifneq ($(filter all _all modules,$(MAKECMDGOALS)),)
 266 #  KBUILD_MODULES := 1
 267 #endif
 268
 269 #ifeq ($(MAKECMDGOALS),)
 270 #  KBUILD_MODULES := 1
 271 #endif
 272
 273 export KBUILD_MODULES KBUILD_BUILTIN
 274 export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
 275
 276 # Beautify output
 277 # ---------------------------------------------------------------------------
 278 #
 279 # Normally, we echo the whole command before executing it. By making
 280 # that echo $($(quiet)$(cmd)), we now have the possibility to set
 281 # $(quiet) to choose other forms of output instead, e.g.
 282 #
 283 #         quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
 284 #         cmd_cc_o_c       = $(CC) $(c_flags) -c -o $@ $<
 285 #
 286 # If $(quiet) is empty, the whole command will be printed.
 287 # If it is set to "quiet_", only the short version will be printed.
 288 # If it is set to "silent_", nothing will be printed at all, since
 289 # the variable $(silent_cmd_cc_o_c) doesn't exist.
 290 #
 291 # A simple variant is to prefix commands with $(Q) - that's useful
 292 # for commands that shall be hidden in non-verbose mode.
 293 #
 294 #       $(Q)ln $@ :<
 295 #
 296 # If KBUILD_VERBOSE equals 0 then the above command will be hidden.
 297 # If KBUILD_VERBOSE equals 1 then the above command is displayed.
 298
 299 ifeq ($(KBUILD_VERBOSE),1)
 300   quiet =
 301   Q =
 302 else
 303   quiet=quiet_
 304   Q = @
 305 endif
 306
 307 # If the user is running make -s (silent mode), suppress echoing of
 308 # commands
 309
 310 ifneq ($(filter s% -s%,$(MAKEFLAGS)),)
 311   quiet=silent_
 312 endif
 313
 314 export quiet Q KBUILD_VERBOSE
 315
 316
 317 # Look for make include files relative to root of kernel src
 318 MAKEFLAGS += --include-dir=$(srctree)
 319
 320 # We need some generic definitions (do not try to remake the file).
 321 $(srctree)/scripts/Kbuild.include: ;
 322 include $(srctree)/scripts/Kbuild.include
 323
 324 # Make variables (CC, etc...)
 325
 326 AS              = $(CROSS_COMPILE)as
 327 # Always use GNU ld
 328 ifneq ($(shell $(CROSS_COMPILE)ld.bfd -v 2> /dev/null),)
 329 LD              = $(CROSS_COMPILE)ld.bfd
 330 else
 331 LD              = $(CROSS_COMPILE)ld
 332 endif
 333 CC              = $(CROSS_COMPILE)gcc
 334 CPP             = $(CC) -E
 335 AR              = $(CROSS_COMPILE)ar
 336 NM              = $(CROSS_COMPILE)nm
 337 LDR             = $(CROSS_COMPILE)ldr
 338 STRIP           = $(CROSS_COMPILE)strip
 339 OBJCOPY         = $(CROSS_COMPILE)objcopy
 340 OBJDUMP         = $(CROSS_COMPILE)objdump
 341 AWK             = awk
 342 RANLIB          = $(CROSS_COMPILE)RANLIB
 343 DTC             = dtc
 344 CHECK           = sparse
 345
 346 CHECKFLAGS     := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \
 347                   -Wbitwise -Wno-return-void -D__CHECK_ENDIAN__ $(CF)
 348
 349 KBUILD_CPPFLAGS := -D__KERNEL__
 350
 351 KBUILD_CFLAGS   := -Wall -Wstrict-prototypes \
 352                    -Wno-format-security \
 353                    -fno-builtin -ffreestanding
 354 KBUILD_AFLAGS   := -D__ASSEMBLY__
 355
 356 # Read UBOOTRELEASE from include/config/uboot.release (if it exists)
 357 UBOOTRELEASE = $(shell cat include/config/uboot.release 2> /dev/null)
 358 UBOOTVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(SUBLEVEL)))$(EXTRAVERSION)
 359
 360 export VERSION PATCHLEVEL SUBLEVEL UBOOTRELEASE UBOOTVERSION
 361 export ARCH CPU BOARD VENDOR SOC CPUDIR BOARDDIR
 362 export CONFIG_SHELL HOSTCC HOSTCFLAGS HOSTLDFLAGS CROSS_COMPILE AS LD CC
 363 export CPP AR NM LDR STRIP OBJCOPY OBJDUMP
 364 export MAKE AWK
 365 export DTC CHECK CHECKFLAGS
 366
 367 export KBUILD_CPPFLAGS NOSTDINC_FLAGS UBOOTINCLUDE OBJCOPYFLAGS LDFLAGS
 368 export KBUILD_CFLAGS KBUILD_AFLAGS
 369
 370 # When compiling out-of-tree modules, put MODVERDIR in the module
 371 # tree rather than in the kernel tree. The kernel tree might
 372 # even be read-only.
 373 export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions
 374
 375 # Files to ignore in find ... statements
 376
 377 RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS \
 378                    -o -name .pc -o -name .hg -o -name .git \) -prune -o
 379 export RCS_TAR_IGNORE := --exclude SCCS --exclude BitKeeper --exclude .svn \
 380                          --exclude CVS --exclude .pc --exclude .hg --exclude .git
 381
 382 # ===========================================================================
 383 # Rules shared between *config targets and build targets
 384
 385 # Basic helpers built in scripts/
 386 PHONY += scripts_basic
 387 scripts_basic:
 388         $(Q)$(MAKE) $(build)=scripts/basic
 389         $(Q)rm -f .tmp_quiet_recordmcount
 390
 391 # To avoid any implicit rule to kick in, define an empty command.
 392 scripts/basic/%: scripts_basic ;
 393
 394 PHONY += outputmakefile
 395 # outputmakefile generates a Makefile in the output directory, if using a
 396 # separate output directory. This allows convenient use of make in the
 397 # output directory.
 398 outputmakefile:
 399 ifneq ($(KBUILD_SRC),)
 400         $(Q)ln -fsn $(srctree) source
 401         $(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \
 402             $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL)
 403 endif
 404
 405 # To make sure we do not include .config for any of the *config targets
 406 # catch them early, and hand them over to scripts/kconfig/Makefile
 407 # It is allowed to specify more targets when calling make, including
 408 # mixing *config targets and build targets.
 409 # For example 'make oldconfig all'.
 410 # Detect when mixed targets is specified, and make a second invocation
 411 # of make so .config is not included in this case either (for *config).
 412
 413 version_h := include/generated/version_autogenerated.h
 414 timestamp_h := include/generated/timestamp_autogenerated.h
 415
 416 no-dot-config-targets := clean clobber mrproper distclean \
 417                          help %docs check% coccicheck \
 418                          ubootversion backup
 419
 420 config-targets := 0
 421 mixed-targets  := 0
 422 dot-config     := 1
 423
 424 ifneq ($(filter $(no-dot-config-targets), $(MAKECMDGOALS)),)
 425         ifeq ($(filter-out $(no-dot-config-targets), $(MAKECMDGOALS)),)
 426                 dot-config := 0
 427         endif
 428 endif
 429
 430 ifeq ($(KBUILD_EXTMOD),)
 431         ifneq ($(filter config %config,$(MAKECMDGOALS)),)
 432                 config-targets := 1
 433                 ifneq ($(filter-out config %config,$(MAKECMDGOALS)),)
 434                         mixed-targets := 1
 435                 endif
 436         endif
 437 endif
 438
 439 ifeq ($(mixed-targets),1)
 440 # ===========================================================================
 441 # We're called with mixed targets (*config and build targets).
 442 # Handle them one by one.
 443
 444 PHONY += $(MAKECMDGOALS) build-one-by-one
 445
 446 $(MAKECMDGOALS): build-one-by-one
 447         @:
 448
 449 build-one-by-one:
 450         $(Q)set -e; \
 451         for i in $(MAKECMDGOALS); do \
 452                 $(MAKE) -f $(srctree)/Makefile $$i; \
 453         done
 454
 455 else
 456 ifeq ($(config-targets),1)
 457 # ===========================================================================
 458 # *config targets only - make sure prerequisites are updated, and descend
 459 # in scripts/kconfig to make the *config target
 460
 461 # Read arch specific Makefile to set KBUILD_DEFCONFIG as needed.
 462 # KBUILD_DEFCONFIG may point out an alternative default configuration
 463 # used for 'make defconfig'
 464
 465 %_config:: outputmakefile
 466         @$(MKCONFIG) -A $(@:_config=)
 467
 468 else
 469 # ===========================================================================
 470 # Build targets only - this includes vmlinux, arch specific targets, clean
 471 # targets and others. In general all targets except *config targets.
 472
 473 # load ARCH, BOARD, and CPU configuration
 474 -include include/config.mk
 475
 476 ifeq ($(dot-config),1)
 477 # Read in config
 478 -include include/autoconf.mk
 479 -include include/autoconf.mk.dep
 480
 481 # load other configuration
 482 include $(srctree)/config.mk
 483
 484 ifeq ($(wildcard include/config.mk),)
 485 $(error "System not configured - see README")
 486 endif
 487
 488 # If board code explicitly specified LDSCRIPT or CONFIG_SYS_LDSCRIPT, use
 489 # that (or fail if absent).  Otherwise, search for a linker script in a
 490 # standard location.
 491
 492 ifndef LDSCRIPT
 493         #LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot.lds.debug
 494         ifdef CONFIG_SYS_LDSCRIPT
 495                 # need to strip off double quotes
 496                 LDSCRIPT := $(srctree)/$(CONFIG_SYS_LDSCRIPT:"%"=%)
 497         endif
 498 endif
 499
 500 # If there is no specified link script, we look in a number of places for it
 501 ifndef LDSCRIPT
 502         ifeq ($(CONFIG_NAND_U_BOOT),y)
 503                 LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot-nand.lds
 504                 ifeq ($(wildcard $(LDSCRIPT)),)
 505                         LDSCRIPT := $(TOPDIR)/$(CPUDIR)/u-boot-nand.lds
 506                 endif
 507         endif
 508         ifeq ($(wildcard $(LDSCRIPT)),)
 509                 LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot.lds
 510         endif
 511         ifeq ($(wildcard $(LDSCRIPT)),)
 512                 LDSCRIPT := $(TOPDIR)/$(CPUDIR)/u-boot.lds
 513         endif
 514         ifeq ($(wildcard $(LDSCRIPT)),)
 515                 LDSCRIPT := $(TOPDIR)/arch/$(ARCH)/cpu/u-boot.lds
 516         endif
 517 endif
 518
 519 else
 520
 521
 522 endif # $(dot-config)
 523
 524 KBUILD_CFLAGS += -Os #-fomit-frame-pointer
 525
 526 ifdef BUILD_TAG
 527 KBUILD_CFLAGS += -DBUILD_TAG='"$(BUILD_TAG)"'
 528 endif
 529
 530 KBUILD_CFLAGS += $(call cc-option,-fno-stack-protector)
 531
 532 KBUILD_CFLAGS   += -g
 533 # $(KBUILD_AFLAGS) sets -g, which causes gcc to pass a suitable -g<format>
 534 # option to the assembler.
 535 KBUILD_AFLAGS   += -g
 536
 537 # Report stack usage if supported
 538 ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-stack-usage.sh $(CC)),y)
 539         KBUILD_CFLAGS += -fstack-usage
 540 endif
 541
 542 KBUILD_CFLAGS += $(call cc-option,-Wno-format-nonliteral)
 543
 544 # turn jbsr into jsr for m68k
 545 ifeq ($(ARCH),m68k)
 546 ifeq ($(findstring 3.4,$(shell $(CC) --version)),3.4)
 547 KBUILD_AFLAGS += -Wa,-gstabs,-S
 548 endif
 549 endif
 550
 551 ifneq ($(CONFIG_SYS_TEXT_BASE),)
 552 KBUILD_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE)
 553 endif
 554
 555 export CONFIG_SYS_TEXT_BASE
 556
 557 # Use UBOOTINCLUDE when you must reference the include/ directory.
 558 # Needed to be compatible with the O= option
 559 UBOOTINCLUDE    :=
 560 ifneq ($(OBJTREE),$(SRCTREE))
 561 UBOOTINCLUDE    += -I$(OBJTREE)/include
 562 endif
 563 UBOOTINCLUDE    += -I$(srctree)/include \
 564                 -I$(srctree)/arch/$(ARCH)/include
 565
 566 NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
 567 CHECKFLAGS     += $(NOSTDINC_FLAGS)
 568
 569 # FIX ME
 570 cpp_flags := $(KBUILD_CPPFLAGS) $(PLATFORM_CPPFLAGS) $(UBOOTINCLUDE) \
 571                                                         $(NOSTDINC_FLAGS)
 572 c_flags := $(KBUILD_CFLAGS) $(cpp_flags)
 573
 574 #########################################################################
 575 # U-Boot objects....order is important (i.e. start must be first)
 576
 577 head-y := $(CPUDIR)/start.o
 578 head-$(CONFIG_4xx) += arch/powerpc/cpu/ppc4xx/resetvec.o
 579 head-$(CONFIG_MPC85xx) += arch/powerpc/cpu/mpc85xx/resetvec.o
 580
 581 HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makefile),y,n)
 582
 583 libs-y += lib/
 584 libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/
 585 libs-y += $(CPUDIR)/
 586 ifdef SOC
 587 libs-y += $(CPUDIR)/$(SOC)/
 588 endif
 589 libs-$(CONFIG_OF_EMBED) += dts/
 590 libs-y += arch/$(ARCH)/lib/
 591 libs-y += fs/
 592 libs-y += net/
 593 libs-y += disk/
 594 libs-y += drivers/
 595 libs-$(CONFIG_DM) += drivers/core/
 596 libs-y += drivers/dma/
 597 libs-y += drivers/gpio/
 598 libs-y += drivers/i2c/
 599 libs-y += drivers/input/
 600 libs-y += drivers/mmc/
 601 libs-y += drivers/mtd/
 602 libs-$(CONFIG_CMD_NAND) += drivers/mtd/nand/
 603 libs-y += drivers/mtd/onenand/
 604 libs-$(CONFIG_CMD_UBI) += drivers/mtd/ubi/
 605 libs-y += drivers/mtd/spi/
 606 libs-y += drivers/net/
 607 libs-y += drivers/net/phy/
 608 libs-y += drivers/pci/
 609 libs-y += drivers/power/ \
 610         drivers/power/fuel_gauge/ \
 611         drivers/power/mfd/ \
 612         drivers/power/pmic/ \
 613         drivers/power/battery/
 614 libs-y += drivers/spi/
 615 libs-$(CONFIG_FMAN_ENET) += drivers/net/fm/
 616 libs-$(CONFIG_SYS_FSL_DDR) += drivers/ddr/fsl/
 617 libs-y += drivers/serial/
 618 libs-y += drivers/usb/eth/
 619 libs-y += drivers/usb/gadget/
 620 libs-y += drivers/usb/host/
 621 libs-y += drivers/usb/musb/
 622 libs-y += drivers/usb/musb-new/
 623 libs-y += drivers/usb/phy/
 624 libs-y += drivers/usb/ulpi/
 625 libs-y += common/
 626 libs-y += lib/libfdt/
 627 libs-$(CONFIG_API) += api/
 628 libs-$(CONFIG_HAS_POST) += post/
 629 libs-y += test/
 630 libs-y += test/dm/
 631 libs-$(CONFIG_DM_DEMO) += drivers/demo/
 632
 633 ifneq (,$(filter $(SOC), mx25 mx27 mx5 mx6 mx31 mx35 mxs vf610))
 634 libs-y += arch/$(ARCH)/imx-common/
 635 endif
 636
 637 libs-$(CONFIG_ARM) += arch/arm/cpu/
 638 libs-$(CONFIG_PPC) += arch/powerpc/cpu/
 639
 640 libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/)
 641
 642 libs-y := $(sort $(libs-y))
 643
 644 u-boot-dirs     := $(patsubst %/,%,$(filter %/, $(libs-y))) tools examples
 645
 646 u-boot-alldirs  := $(sort $(u-boot-dirs) $(patsubst %/,%,$(filter %/, $(libs-))))
 647
 648 libs-y          := $(patsubst %/, %/built-in.o, $(libs-y))
 649
 650 u-boot-init := $(head-y)
 651 u-boot-main := $(libs-y)
 652
 653
 654 # Add GCC lib
 655 ifdef CONFIG_USE_PRIVATE_LIBGCC
 656 ifeq ($(CONFIG_USE_PRIVATE_LIBGCC),y)
 657 PLATFORM_LIBGCC = arch/$(ARCH)/lib/lib.a
 658 else
 659 PLATFORM_LIBGCC = -L $(CONFIG_USE_PRIVATE_LIBGCC) -lgcc
 660 endif
 661 else
 662 PLATFORM_LIBGCC := -L $(shell dirname `$(CC) $(c_flags) -print-libgcc-file-name`) -lgcc
 663 endif
 664 PLATFORM_LIBS += $(PLATFORM_LIBGCC)
 665 export PLATFORM_LIBS
 666
 667 # Special flags for CPP when processing the linker script.
 668 # Pass the version down so we can handle backwards compatibility
 669 # on the fly.
 670 LDPPFLAGS += \
 671         -include $(TOPDIR)/include/u-boot/u-boot.lds.h \
 672         -DCPUDIR=$(CPUDIR) \
 673         $(shell $(LD) --version | \
 674           sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
 675
 676 #########################################################################
 677 #########################################################################
 678
 679 ifneq ($(CONFIG_BOARD_SIZE_LIMIT),)
 680 BOARD_SIZE_CHECK = \
 681         @actual=`wc -c $@ | awk '{print $$1}'`; \
 682         limit=`printf "%d" $(CONFIG_BOARD_SIZE_LIMIT)`; \
 683         if test $$actual -gt $$limit; then \
 684                 echo "$@ exceeds file size limit:" >&2 ; \
 685                 echo "  limit:  $$limit bytes" >&2 ; \
 686                 echo "  actual: $$actual bytes" >&2 ; \
 687                 echo "  excess: $$((actual - limit)) bytes" >&2; \
 688                 exit 1; \
 689         fi
 690 else
 691 BOARD_SIZE_CHECK =
 692 endif
 693
 694 # Statically apply RELA-style relocations (currently arm64 only)
 695 ifneq ($(CONFIG_STATIC_RELA),)
 696 # $(1) is u-boot ELF, $(2) is u-boot bin, $(3) is text base
 697 DO_STATIC_RELA = \
 698         start=$$($(NM) $(1) | grep __rel_dyn_start | cut -f 1 -d ' '); \
 699         end=$$($(NM) $(1) | grep __rel_dyn_end | cut -f 1 -d ' '); \
 700         tools/relocate-rela $(2) $(3) $$start $$end
 701 else
 702 DO_STATIC_RELA =
 703 endif
 704
 705 # Always append ALL so that arch config.mk's can add custom ones
 706 ALL-y += u-boot.srec u-boot.bin System.map
 707
 708 ALL-$(CONFIG_NAND_U_BOOT) += u-boot-nand.bin
 709 ALL-$(CONFIG_ONENAND_U_BOOT) += u-boot-onenand.bin
 710 ALL-$(CONFIG_RAMBOOT_PBL) += u-boot.pbl
 711 ALL-$(CONFIG_SPL) += spl/u-boot-spl.bin
 712 ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot.img
 713 ALL-$(CONFIG_TPL) += tpl/u-boot-tpl.bin
 714 ALL-$(CONFIG_OF_SEPARATE) += u-boot.dtb u-boot-dtb.bin
 715 ALL-$(CONFIG_OF_HOSTFILE) += u-boot.dtb
 716 ifneq ($(CONFIG_SPL_TARGET),)
 717 ALL-$(CONFIG_SPL) += $(CONFIG_SPL_TARGET:"%"=%)
 718 endif
 719 ALL-$(CONFIG_REMAKE_ELF) += u-boot.elf
 720
 721 # enable combined SPL/u-boot/dtb rules for tegra
 722 ifneq ($(CONFIG_TEGRA),)
 723 ifeq ($(CONFIG_SPL),y)
 724 ifeq ($(CONFIG_OF_SEPARATE),y)
 725 ALL-y += u-boot-dtb-tegra.bin
 726 else
 727 ALL-y += u-boot-nodtb-tegra.bin
 728 endif
 729 endif
 730 endif
 731
 732 LDFLAGS_u-boot += $(LDFLAGS_FINAL)
 733 ifneq ($(CONFIG_SYS_TEXT_BASE),)
 734 LDFLAGS_u-boot += -Ttext $(CONFIG_SYS_TEXT_BASE)
 735 endif
 736
 737 quiet_cmd_objcopy = OBJCOPY $@
 738 cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
 739
 740 quiet_cmd_mkimage = UIMAGE  $@
 741 cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
 742         $(if $(KBUILD_VERBOSE:1=), >/dev/null)
 743
 744 quiet_cmd_cat = CAT     $@
 745 cmd_cat = cat $(filter-out $(PHONY), $^) > $@
 746
 747 append = cat $(filter-out $< $(PHONY), $^) >> $@
 748
 749 quiet_cmd_pad_cat = CAT     $@
 750 cmd_pad_cat = $(cmd_objcopy) && $(append) || rm -f $@
 751
 752 all:            $(ALL-y)
 753
 754 PHONY += dtbs
 755 dtbs dts/dt.dtb: checkdtc u-boot
 756         $(Q)$(MAKE) $(build)=dts dtbs
 757
 758 u-boot-dtb.bin: u-boot.bin dts/dt.dtb FORCE
 759         $(call if_changed,cat)
 760
 761 quiet_cmd_copy = COPY    $@
 762       cmd_copy = cp $< $@
 763
 764 u-boot.dtb: dts/dt.dtb
 765         $(call cmd,copy)
 766
 767 OBJCOPYFLAGS_u-boot.hex := -O ihex
 768
 769 OBJCOPYFLAGS_u-boot.srec := -O srec
 770
 771 u-boot.hex u-boot.srec: u-boot FORCE
 772         $(call if_changed,objcopy)
 773
 774 OBJCOPYFLAGS_u-boot.bin := -O binary
 775
 776 u-boot.bin: u-boot FORCE
 777         $(call if_changed,objcopy)
 778         $(call DO_STATIC_RELA,$<,$@,$(CONFIG_SYS_TEXT_BASE))
 779         $(BOARD_SIZE_CHECK)
 780
 781 u-boot.ldr:     u-boot
 782                 $(CREATE_LDR_ENV)
 783                 $(LDR) -T $(CONFIG_BFIN_CPU) -c $@ $< $(LDR_FLAGS)
 784                 $(BOARD_SIZE_CHECK)
 785
 786 OBJCOPYFLAGS_u-boot.ldr.hex := -I binary -O ihex
 787
 788 OBJCOPYFLAGS_u-boot.ldr.srec := -I binary -O srec
 789
 790 u-boot.ldr.hex u-boot.ldr.srec: u-boot.ldr FORCE
 791         $(call if_changed,objcopy)
 792
 793 #
 794 # U-Boot entry point, needed for booting of full-blown U-Boot
 795 # from the SPL U-Boot version.
 796 #
 797 ifndef CONFIG_SYS_UBOOT_START
 798 CONFIG_SYS_UBOOT_START := 0
 799 endif
 800
 801 MKIMAGEFLAGS_u-boot.img = -A $(ARCH) -T firmware -C none -O u-boot \
 802         -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
 803         -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
 804
 805 MKIMAGEFLAGS_u-boot.kwb = -n $(CONFIG_SYS_KWD_CONFIG) -T kwbimage \
 806                 -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE)
 807
 808 MKIMAGEFLAGS_u-boot.pbl = -n $(CONFIG_SYS_FSL_PBL_RCW) \
 809                 -R $(CONFIG_SYS_FSL_PBL_PBI) -T pblimage
 810
 811 u-boot.img u-boot.kwb u-boot.pbl: u-boot.bin FORCE
 812         $(call if_changed,mkimage)
 813
 814 u-boot.imx: u-boot.bin
 815         $(Q)$(MAKE) $(build)=arch/arm/imx-common $@
 816
 817 u-boot.sha1:    u-boot.bin
 818                 tools/ubsha1 u-boot.bin
 819
 820 u-boot.dis:     u-boot
 821                 $(OBJDUMP) -d $< > $@
 822
 823 ifdef CONFIG_TPL
 824 SPL_PAYLOAD := tpl/u-boot-with-tpl.bin
 825 else
 826 SPL_PAYLOAD := u-boot.bin
 827 endif
 828
 829 OBJCOPYFLAGS_u-boot-with-spl.bin = -I binary -O binary \
 830                                    --pad-to=$(CONFIG_SPL_PAD_TO)
 831 u-boot-with-spl.bin: spl/u-boot-spl.bin $(SPL_PAYLOAD) FORCE
 832         $(call if_changed,pad_cat)
 833
 834 OBJCOPYFLAGS_u-boot-with-tpl.bin = -I binary -O binary \
 835                                    --pad-to=$(CONFIG_TPL_PAD_TO)
 836 tpl/u-boot-with-tpl.bin: tpl/u-boot-tpl.bin u-boot.bin FORCE
 837         $(call if_changed,pad_cat)
 838
 839 SPL: spl/u-boot-spl.bin FORCE
 840         $(Q)$(MAKE) $(build)=arch/arm/imx-common $@
 841
 842 u-boot-with-spl.imx u-boot-with-nand-spl.imx: SPL u-boot.bin FORCE
 843         $(Q)$(MAKE) $(build)=arch/arm/imx-common $@
 844
 845 MKIMAGEFLAGS_u-boot.ubl = -n $(UBL_CONFIG) -T ublimage -e $(CONFIG_SYS_TEXT_BASE)
 846
 847 u-boot.ubl: u-boot-with-spl.bin FORCE
 848         $(call if_changed,mkimage)
 849
 850 MKIMAGEFLAGS_u-boot-spl.ais = -s -n $(if $(CONFIG_AIS_CONFIG_FILE), \
 851         $(srctree)/$(CONFIG_AIS_CONFIG_FILE:"%"=%),"/dev/null") \
 852         -T aisimage -e $(CONFIG_SPL_TEXT_BASE)
 853 spl/u-boot-spl.ais: spl/u-boot-spl.bin FORCE
 854         $(call if_changed,mkimage)
 855
 856 OBJCOPYFLAGS_u-boot.ais = -I binary -O binary --pad-to=$(CONFIG_SPL_MAX_SIZE)
 857 u-boot.ais: spl/u-boot-spl.ais u-boot.img FORCE
 858         $(call if_changed,pad_cat)
 859
 860 u-boot.sb: u-boot.bin spl/u-boot-spl.bin
 861         $(Q)$(MAKE) $(build)=arch/arm/cpu/arm926ejs/mxs $(objtree)/u-boot.sb
 862
 863 # On x600 (SPEAr600) U-Boot is appended to U-Boot SPL.
 864 # Both images are created using mkimage (crc etc), so that the ROM
 865 # bootloader can check its integrity. Padding needs to be done to the
 866 # SPL image (with mkimage header) and not the binary. Otherwise the resulting image
 867 # which is loaded/copied by the ROM bootloader to SRAM doesn't fit.
 868 # The resulting image containing both U-Boot images is called u-boot.spr
 869 MKIMAGEFLAGS_u-boot-spl.img = -A $(ARCH) -T firmware -C none \
 870         -a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE) -n XLOADER
 871 spl/u-boot-spl.img: spl/u-boot-spl.bin FORCE
 872         $(call if_changed,mkimage)
 873
 874 OBJCOPYFLAGS_u-boot.spr = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
 875                           --gap-fill=0xff
 876 u-boot.spr: spl/u-boot-spl.img u-boot.img FORCE
 877         $(call if_changed,pad_cat)
 878
 879 ifneq ($(CONFIG_TEGRA),)
 880 OBJCOPYFLAGS_u-boot-nodtb-tegra.bin = -O binary --pad-to=$(CONFIG_SYS_TEXT_BASE)
 881 u-boot-nodtb-tegra.bin: spl/u-boot-spl u-boot.bin FORCE
 882         $(call if_changed,pad_cat)
 883
 884 ifeq ($(CONFIG_OF_SEPARATE),y)
 885 u-boot-dtb-tegra.bin: u-boot-nodtb-tegra.bin dts/dt.dtb FORCE
 886         $(call if_changed,cat)
 887 endif
 888 endif
 889
 890 u-boot-img.bin: spl/u-boot-spl.bin u-boot.img FORCE
 891         $(call if_changed,cat)
 892
 893 # PPC4xx needs the SPL at the end of the image, since the reset vector
 894 # is located at 0xfffffffc. So we can't use the "u-boot-img.bin" target
 895 # and need to introduce a new build target with the full blown U-Boot
 896 # at the start padded up to the start of the SPL image. And then concat
 897 # the SPL image to the end.
 898
 899 OBJCOPYFLAGS_u-boot-img-spl-at-end.bin := -I binary -O binary \
 900         --pad-to=$(CONFIG_UBOOT_PAD_TO) --gap-fill=0xff
 901 u-boot-img-spl-at-end.bin: u-boot.img spl/u-boot-spl.bin FORCE
 902         $(call if_changed,pad_cat)
 903
 904 # Create a new ELF from a raw binary file.  This is useful for arm64
 905 # where static relocation needs to be performed on the raw binary,
 906 # but certain simulators only accept an ELF file (but don't do the
 907 # relocation).
 908 # FIXME refactor dts/Makefile to share target/arch detection
 909 u-boot.elf: u-boot.bin
 910         @$(OBJCOPY)  -B aarch64 -I binary -O elf64-littleaarch64 \
 911                 $< u-boot-elf.o
 912         @$(LD) u-boot-elf.o -o $@ \
 913                 --defsym=_start=$(CONFIG_SYS_TEXT_BASE) \
 914                 -Ttext=$(CONFIG_SYS_TEXT_BASE)
 915
 916 # Rule to link u-boot
 917 # May be overridden by arch/$(ARCH)/config.mk
 918 quiet_cmd_u-boot__ ?= LD      $@
 919       cmd_u-boot__ ?= $(LD) $(LDFLAGS) $(LDFLAGS_u-boot) -o $@ \
 920       -T u-boot.lds $(u-boot-init)                             \
 921       --start-group $(u-boot-main) --end-group                 \
 922       $(PLATFORM_LIBS) -Map u-boot.map
 923
 924 u-boot: $(u-boot-init) $(u-boot-main) u-boot.lds
 925         $(call if_changed,u-boot__)
 926 ifeq ($(CONFIG_KALLSYMS),y)
 927         smap=`$(call SYSTEM_MAP,u-boot) | \
 928                 awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \
 929         $(CC) $(c_flags) -DSYSTEM_MAP="\"$${smap}\"" \
 930                 -c $(srctree)/common/system_map.c -o common/system_map.o
 931         $(call cmd,u-boot__) common/system_map.o
 932 endif
 933
 934 # The actual objects are generated when descending,
 935 # make sure no implicit rule kicks in
 936 $(sort $(u-boot-init) $(u-boot-main)): $(u-boot-dirs) ;
 937
 938 # Handle descending into subdirectories listed in $(vmlinux-dirs)
 939 # Preset locale variables to speed up the build process. Limit locale
 940 # tweaks to this spot to avoid wrong language settings when running
 941 # make menuconfig etc.
 942 # Error messages still appears in the original language
 943
 944 PHONY += $(u-boot-dirs)
 945 $(u-boot-dirs): prepare scripts
 946         $(Q)$(MAKE) $(build)=$@
 947
 948 tools: prepare
 949 # The "tools" are needed early
 950 $(filter-out tools, $(u-boot-dirs)): tools
 951 # The "examples" conditionally depend on U-Boot (say, when USE_PRIVATE_LIBGCC
 952 # is "yes"), so compile examples after U-Boot is compiled.
 953 examples: $(filter-out examples, $(u-boot-dirs))
 954
 955 define filechk_uboot.release
 956         echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
 957 endef
 958
 959 # Store (new) UBOOTRELEASE string in include/config/uboot.release
 960 include/config/uboot.release: Makefile FORCE
 961         $(call filechk,uboot.release)
 962
 963
 964 # Things we need to do before we recursively start building the kernel
 965 # or the modules are listed in "prepare".
 966 # A multi level approach is used. prepareN is processed before prepareN-1.
 967 # archprepare is used in arch Makefiles and when processed asm symlink,
 968 # version.h and scripts_basic is processed / created.
 969
 970 # Listed in dependency order
 971 PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3
 972
 973 # prepare3 is used to check if we are building in a separate output directory,
 974 # and if so do:
 975 # 1) Check that make has not been executed in the kernel src $(srctree)
 976 prepare3: include/config/uboot.release
 977 ifneq ($(KBUILD_SRC),)
 978         @$(kecho) '  Using $(srctree) as source for u-boot'
 979         $(Q)if [ -f $(srctree)/include/config.mk ]; then \
 980                 echo >&2 "  $(srctree) is not clean, please run 'make mrproper'"; \
 981                 echo >&2 "  in the '$(srctree)' directory.";\
 982                 /bin/false; \
 983         fi;
 984 endif
 985
 986 # prepare2 creates a makefile if using a separate output directory
 987 prepare2: prepare3 outputmakefile
 988
 989 prepare1: prepare2 $(version_h) $(timestamp_h)
 990 ifeq ($(__HAVE_ARCH_GENERIC_BOARD),)
 991 ifeq ($(CONFIG_SYS_GENERIC_BOARD),y)
 992         @echo >&2 "  Your architecture does not support generic board."
 993         @echo >&2 "  Please undefine CONFIG_SYS_GENERIC_BOARD in your board config file."
 994         @/bin/false
 995 endif
 996 endif
 997 ifeq ($(wildcard $(LDSCRIPT)),)
 998         @echo >&2 "  Could not find linker script."
 999         @/bin/false
1000 endif
1001
1002 archprepare: prepare1 scripts_basic
1003
1004 prepare0: archprepare FORCE
1005         $(Q)$(MAKE) $(build)=.
1006
1007 # All the preparing..
1008 prepare: prepare0
1009
1010 # Generate some files
1011 # ---------------------------------------------------------------------------
1012
1013 define filechk_version.h
1014         (echo \#define PLAIN_VERSION \"$(UBOOTRELEASE)\"; \
1015         echo \#define U_BOOT_VERSION \"U-Boot \" PLAIN_VERSION; \
1016         echo \#define CC_VERSION_STRING \"$$($(CC) --version | head -n 1)\"; \
1017         echo \#define LD_VERSION_STRING \"$$($(LD) --version | head -n 1)\"; )
1018 endef
1019
1020 define filechk_timestamp.h
1021         (LC_ALL=C date +'#define U_BOOT_DATE "%b %d %C%y"'; \
1022         LC_ALL=C date +'#define U_BOOT_TIME "%T"')
1023 endef
1024
1025 $(version_h): $(srctree)/Makefile FORCE
1026         $(call filechk,version.h)
1027
1028 $(timestamp_h): $(srctree)/Makefile FORCE
1029         $(call filechk,timestamp.h)
1030
1031 #
1032 # Auto-generate the autoconf.mk file (which is included by all makefiles)
1033 #
1034 # This target actually generates 2 files; autoconf.mk and autoconf.mk.dep.
1035 # the dep file is only include in this top level makefile to determine when
1036 # to regenerate the autoconf.mk file.
1037
1038 quiet_cmd_autoconf_dep = GEN     $@
1039       cmd_autoconf_dep = $(CC) -x c -DDO_DEPS_ONLY -M $(c_flags) \
1040         -MQ include/autoconf.mk $(srctree)/include/common.h > $@ || rm $@
1041
1042 include/autoconf.mk.dep: include/config.h include/common.h
1043         $(call cmd,autoconf_dep)
1044
1045 quiet_cmd_autoconf = GEN     $@
1046       cmd_autoconf = \
1047         $(CPP) $(c_flags) -DDO_DEPS_ONLY -dM $(srctree)/include/common.h > $@.tmp && \
1048         sed -n -f $(srctree)/tools/scripts/define2mk.sed $@.tmp > $@; \
1049         rm $@.tmp
1050
1051 include/autoconf.mk: include/config.h
1052         $(call cmd,autoconf)
1053
1054 # ---------------------------------------------------------------------------
1055
1056 PHONY += depend dep
1057 depend dep:
1058         @echo '*** Warning: make $@ is unnecessary now.'
1059
1060 # ---------------------------------------------------------------------------
1061 quiet_cmd_cpp_lds = LDS     $@
1062 cmd_cpp_lds = $(CPP) $(cpp_flags) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ \
1063                 -x assembler-with-cpp -P -o $@ $<
1064
1065 u-boot.lds: $(LDSCRIPT) prepare FORCE
1066         $(call if_changed,cpp_lds)
1067
1068 PHONY += nand_spl
1069 nand_spl: prepare
1070         $(Q)$(MAKE) $(build)=nand_spl/board/$(BOARDDIR) all
1071         @echo >&2
1072         @echo >&2 "==================== WARNING ====================="
1073         @echo >&2 "nand_spl will not be included in v2014.07 release."
1074         @echo >&2 "Please switch over to SPL."
1075         @echo >&2 "Otherwise, this board will be removed."
1076         @echo >&2 "=================================================="
1077         @echo >&2
1078
1079 nand_spl/u-boot-spl-16k.bin: nand_spl
1080         @:
1081
1082 u-boot-nand.bin: nand_spl/u-boot-spl-16k.bin u-boot.bin FORCE
1083         $(call if_changed,cat)
1084
1085 spl/u-boot-spl.bin: spl/u-boot-spl
1086         @:
1087 spl/u-boot-spl: tools prepare
1088         $(Q)$(MAKE) obj=spl -f $(srctree)/spl/Makefile all
1089
1090 tpl/u-boot-tpl.bin: tools prepare
1091         $(Q)$(MAKE) obj=tpl -f $(srctree)/spl/Makefile all CONFIG_TPL_BUILD=y
1092
1093 TAG_SUBDIRS := $(u-boot-dirs) include
1094
1095 FIND := find
1096 FINDFLAGS := -L
1097
1098 tags ctags:
1099                 ctags -w -o ctags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
1100                                                 -name '*.[chS]' -print`
1101
1102 etags:
1103                 etags -a -o $(obj)etags `$(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) \
1104                                                 -name '*.[chS]' -print`
1105 cscope:
1106                 $(FIND) $(FINDFLAGS) $(TAG_SUBDIRS) -name '*.[chS]' -print > \
1107                                                 cscope.files
1108                 cscope -b -q -k
1109
1110 SYSTEM_MAP = \
1111                 $(NM) $1 | \
1112                 grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
1113                 LC_ALL=C sort
1114 System.map:     u-boot
1115                 @$(call SYSTEM_MAP,$<) > $@
1116
1117 checkthumb:
1118         @if test $(call cc-version) -lt 0404; then \
1119                 echo -n '*** Your GCC does not produce working '; \
1120                 echo 'binaries in THUMB mode.'; \
1121                 echo '*** Your board is configured for THUMB mode.'; \
1122                 false; \
1123         fi
1124
1125 # GCC 3.x is reported to have problems generating the type of relocation
1126 # that U-Boot wants.
1127 # See http://lists.denx.de/pipermail/u-boot/2012-September/135156.html
1128 checkgcc4:
1129         @if test $(call cc-version) -lt 0400; then \
1130                 echo -n '*** Your GCC is too old, please upgrade to GCC 4.x or newer'; \
1131                 false; \
1132         fi
1133
1134 checkdtc:
1135         @if test $(call dtc-version) -lt 0104; then \
1136                 echo '*** Your dtc is too old, please upgrade to dtc 1.4 or newer'; \
1137                 false; \
1138         fi
1139
1140 #########################################################################
1141
1142 # ARM relocations should all be R_ARM_RELATIVE (32-bit) or
1143 # R_AARCH64_RELATIVE (64-bit).
1144 checkarmreloc: u-boot
1145         @RELOC="`$(CROSS_COMPILE)readelf -r -W $< | cut -d ' ' -f 4 | \
1146                 grep R_A | sort -u`"; \
1147         if test "$$RELOC" != "R_ARM_RELATIVE" -a \
1148                  "$$RELOC" != "R_AARCH64_RELATIVE"; then \
1149                 echo "$< contains unexpected relocations: $$RELOC"; \
1150                 false; \
1151         fi
1152
1153 env: scripts_basic
1154         $(Q)$(MAKE) $(build)=tools/$@
1155
1156 tools-all: export HOST_TOOLS_ALL=y
1157 tools-all: env tools ;
1158
1159 cross_tools: export CROSS_BUILD_TOOLS=y
1160 cross_tools: tools ;
1161
1162 .PHONY : CHANGELOG
1163 CHANGELOG:
1164         git log --no-merges U-Boot-1_1_5.. | \
1165         unexpand -a | sed -e 's/\s\s*$$//' > $@
1166
1167 include/license.h: tools/bin2header COPYING
1168         cat COPYING | gzip -9 -c | ./tools/bin2header license_gzip > include/license.h
1169 #########################################################################
1170
1171 ###
1172 # Cleaning is done on three levels.
1173 # make clean     Delete most generated files
1174 #                Leave enough to build external modules
1175 # make mrproper  Delete the current configuration, and all generated files
1176 # make distclean Remove editor backup files, patch leftover files and the like
1177
1178 # Directories & files removed with 'make clean'
1179 CLEAN_DIRS  += $(MODVERDIR)
1180 CLEAN_FILES += u-boot.lds include/bmp_logo.h include/bmp_logo_data.h \
1181                include/autoconf.mk* include/spl-autoconf.mk \
1182                include/tpl-autoconf.mk
1183
1184 # Directories & files removed with 'make clobber'
1185 CLOBBER_DIRS  += $(patsubst %,spl/%, $(filter-out Makefile, \
1186                  $(shell ls -1 spl 2>/dev/null))) \
1187                  tpl
1188 CLOBBER_FILES += u-boot* MLO* SPL System.map nand_spl/u-boot*
1189
1190 # Directories & files removed with 'make mrproper'
1191 MRPROPER_DIRS  += include/config include/generated
1192 MRPROPER_FILES += .config .config.old \
1193                   tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS \
1194                   include/config.h include/config.mk
1195
1196 # clean - Delete most, but leave enough to build external modules
1197 #
1198 clean: rm-dirs  := $(CLEAN_DIRS)
1199 clean: rm-files := $(CLEAN_FILES)
1200
1201 clean-dirs      := $(foreach f,$(u-boot-alldirs),$(if $(wildcard $f/Makefile),$f))
1202
1203 clean-dirs      := $(addprefix _clean_, $(clean-dirs) doc/DocBook)
1204
1205 PHONY += $(clean-dirs) clean archclean
1206 $(clean-dirs):
1207         $(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
1208
1209 # TODO: Do not use *.cfgtmp
1210 clean: $(clean-dirs)
1211         $(call cmd,rmdirs)
1212         $(call cmd,rmfiles)
1213         @find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
1214                 \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \
1215                 -o -name '*.ko.*' -o -name '*.su' -o -name '*.cfgtmp' \
1216                 -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \
1217                 -o -name '*.symtypes' -o -name 'modules.order' \
1218                 -o -name modules.builtin -o -name '.tmp_*.o.*' \
1219                 -o -name '*.gcno' \) -type f -print | xargs rm -f
1220         @find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \
1221                 -path './nand_spl/*' -type l -print | xargs rm -f
1222
1223 # clobber
1224 #
1225 clobber: rm-dirs  := $(CLOBBER_DIRS)
1226 clobber: rm-files := $(CLOBBER_FILES)
1227
1228 PHONY += clobber
1229
1230 clobber: clean
1231         $(call cmd,rmdirs)
1232         $(call cmd,rmfiles)
1233
1234 # mrproper - Delete all generated files, including .config
1235 #
1236 mrproper: rm-dirs  := $(wildcard $(MRPROPER_DIRS))
1237 mrproper: rm-files := $(wildcard $(MRPROPER_FILES))
1238 mrproper-dirs      := $(addprefix _mrproper_,scripts)
1239
1240 PHONY += $(mrproper-dirs) mrproper archmrproper
1241 $(mrproper-dirs):
1242         $(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)
1243
1244 mrproper: clobber $(mrproper-dirs)
1245         $(call cmd,rmdirs)
1246         $(call cmd,rmfiles)
1247         @rm -f arch/*/include/asm/arch arch/*/include/asm/proc
1248
1249 # distclean
1250 #
1251 PHONY += distclean
1252
1253 distclean: mrproper
1254         @find $(srctree) $(RCS_FIND_IGNORE) \
1255                 \( -name '*.orig' -o -name '*.rej' -o -name '*~' \
1256                 -o -name '*.bak' -o -name '#*#' -o -name '.*.orig' \
1257                 -o -name '.*.rej' \
1258                 -o -name '*%' -o -name '.*.cmd' -o -name 'core' \) \
1259                 -type f -print | xargs rm -f
1260
1261 backup:
1262         F=`basename $(TOPDIR)` ; cd .. ; \
1263         gtar --force-local -zcvf `LC_ALL=C date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F
1264
1265 help:
1266         @echo  'Cleaning targets:'
1267         @echo  '  clean           - Remove most generated files but keep the config and'
1268         @echo  '                    necessities for testing u-boot'
1269         @echo  '  clobber         - Remove most generated files but keep the config'
1270         @echo  '  mrproper        - Remove all generated files + config + various backup files'
1271         @echo  '  distclean       - mrproper + remove editor backup and patch files'
1272         @echo  ''
1273 # uncomment after adding Kconfig feature
1274 #       @echo  'Configuration targets:'
1275 #       @$(MAKE) -f $(srctree)/scripts/kconfig/Makefile help
1276 #       @echo  ''
1277         @echo  'Other generic targets:'
1278         @echo  '  all             - Build all necessary images depending on configuration'
1279         @echo  '  u-boot          - Build the bare u-boot'
1280         @echo  '  dir/            - Build all files in dir and below'
1281         @echo  '  dir/file.[oisS] - Build specified target only'
1282         @echo  '  dir/file.lst    - Build specified mixed source/assembly target only'
1283         @echo  '                    (requires a recent binutils and recent build (System.map))'
1284         @echo  '  tags/TAGS       - Generate tags file for editors'
1285         @echo  '  cscope          - Generate cscope index'
1286         @echo  '  ubootrelease    - Output the release version string'
1287         @echo  '  ubootversion    - Output the version stored in Makefile'
1288         @echo  ''
1289         @echo  'Static analysers'
1290         @echo  '  checkstack      - Generate a list of stack hogs'
1291         @echo  ''
1292         @echo  'Documentation targets:'
1293         @$(MAKE) -f $(srctree)/doc/DocBook/Makefile dochelp
1294         @echo  ''
1295         @echo  '  make V=0|1 [targets] 0 => quiet build (default), 1 => verbose build'
1296         @echo  '  make V=2   [targets] 2 => give reason for rebuild of target'
1297         @echo  '  make O=dir [targets] Locate all output files in "dir", including .config'
1298         @echo  '  make C=1   [targets] Check all c source with $$CHECK (sparse by default)'
1299         @echo  '  make C=2   [targets] Force check of all c source with $$CHECK'
1300         @echo  '  make RECORDMCOUNT_WARN=1 [targets] Warn about ignored mcount sections'
1301         @echo  '  make W=n   [targets] Enable extra gcc checks, n=1,2,3 where'
1302         @echo  '                1: warnings which may be relevant and do not occur too often'
1303         @echo  '                2: warnings which occur quite often but may still be relevant'
1304         @echo  '                3: more obscure warnings, can most likely be ignored'
1305         @echo  '                Multiple levels can be combined with W=12 or W=123'
1306         @echo  ''
1307         @echo  'Execute "make" or "make all" to build all targets marked with [*] '
1308         @echo  'For further info see the ./README file'
1309
1310
1311 # Documentation targets
1312 # ---------------------------------------------------------------------------
1313 %docs: scripts_basic FORCE
1314         $(Q)$(MAKE) $(build)=scripts build_docproc
1315         $(Q)$(MAKE) $(build)=doc/DocBook $@
1316
1317 # Dummies...
1318 PHONY += prepare scripts
1319 prepare: ;
1320 scripts: ;
1321
1322 endif #ifeq ($(config-targets),1)
1323 endif #ifeq ($(mixed-targets),1)
1324
1325 PHONY += checkstack ubootrelease ubootversion
1326
1327 checkstack:
1328         $(OBJDUMP) -d u-boot $$(find . -name u-boot-spl) | \
1329         $(PERL) $(src)/scripts/checkstack.pl $(ARCH)
1330
1331 ubootrelease:
1332         @echo "$(UBOOTVERSION)$$($(CONFIG_SHELL) $(srctree)/scripts/setlocalversion $(srctree))"
1333
1334 ubootversion:
1335         @echo $(UBOOTVERSION)
1336
1337 # Single targets
1338 # ---------------------------------------------------------------------------
1339 # Single targets are compatible with:
1340 # - build with mixed source and output
1341 # - build with separate output dir 'make O=...'
1342 # - external modules
1343 #
1344 #  target-dir => where to store outputfile
1345 #  build-dir  => directory in kernel source tree to use
1346
1347 ifeq ($(KBUILD_EXTMOD),)
1348         build-dir  = $(patsubst %/,%,$(dir $@))
1349         target-dir = $(dir $@)
1350 else
1351         zap-slash=$(filter-out .,$(patsubst %/,%,$(dir $@)))
1352         build-dir  = $(KBUILD_EXTMOD)$(if $(zap-slash),/$(zap-slash))
1353         target-dir = $(if $(KBUILD_EXTMOD),$(dir $<),$(dir $@))
1354 endif
1355
1356 %.s: %.c prepare scripts FORCE
1357         $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1358 %.i: %.c prepare scripts FORCE
1359         $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1360 %.o: %.c prepare scripts FORCE
1361         $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1362 %.lst: %.c prepare scripts FORCE
1363         $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1364 %.s: %.S prepare scripts FORCE
1365         $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1366 %.o: %.S prepare scripts FORCE
1367         $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1368 %.symtypes: %.c prepare scripts FORCE
1369         $(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
1370
1371 # Modules
1372 /: prepare scripts FORCE
1373         $(cmd_crmodverdir)
1374         $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
1375         $(build)=$(build-dir)
1376 %/: prepare scripts FORCE
1377         $(cmd_crmodverdir)
1378         $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
1379         $(build)=$(build-dir)
1380 %.ko: prepare scripts FORCE
1381         $(cmd_crmodverdir)
1382         $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1)   \
1383         $(build)=$(build-dir) $(@:.ko=.o)
1384         $(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
1385
1386 # FIXME Should go into a make.lib or something
1387 # ===========================================================================
1388
1389 quiet_cmd_rmdirs = $(if $(wildcard $(rm-dirs)),CLEAN   $(wildcard $(rm-dirs)))
1390       cmd_rmdirs = rm -rf $(rm-dirs)
1391
1392 quiet_cmd_rmfiles = $(if $(wildcard $(rm-files)),CLEAN   $(wildcard $(rm-files)))
1393       cmd_rmfiles = rm -f $(rm-files)
1394
1395 # read all saved command lines
1396
1397 targets := $(wildcard $(sort $(targets)))
1398 cmd_files := $(wildcard .*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
1399
1400 ifneq ($(cmd_files),)
1401   $(cmd_files): ;       # Do not try to update included dependency files
1402   include $(cmd_files)
1403 endif
1404
1405 # Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=dir
1406 # Usage:
1407 # $(Q)$(MAKE) $(clean)=dir
1408 clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj
1409
1410 endif   # skip-makefile
1411
1412 PHONY += FORCE
1413 FORCE:
1414
1415 # Declare the contents of the .PHONY variable as phony.  We keep that
1416 # information in a variable so we can use it in if_changed and friends.
1417 .PHONY: $(PHONY)