]> git.ipfire.org Git - people/ms/u-boot.git/blob - arch/arm/dts/dra7.dtsi
projects / people / ms / u-boot.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
ARM: dts: DRA7: use new dra7-specific compatible string
[people/ms/u-boot.git] / arch / arm / dts / dra7.dtsi
1 /*
2 * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
3 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
7 * Based on "omap4.dtsi"
8 */
9
10 #include <dt-bindings/interrupt-controller/arm-gic.h>
11 #include <dt-bindings/pinctrl/dra.h>
12
13 #define MAX_SOURCES 400
14
15 / {
16 #address-cells = <2>;
17 #size-cells = <2>;
18
19 compatible = "ti,dra7xx";
20 interrupt-parent = <&crossbar_mpu>;
21 chosen { };
22
23 aliases {
24 i2c0 = &i2c1;
25 i2c1 = &i2c2;
26 i2c2 = &i2c3;
27 i2c3 = &i2c4;
28 i2c4 = &i2c5;
29 serial0 = &uart1;
30 serial1 = &uart2;
31 serial2 = &uart3;
32 serial3 = &uart4;
33 serial4 = &uart5;
34 serial5 = &uart6;
35 serial6 = &uart7;
36 serial7 = &uart8;
37 serial8 = &uart9;
38 serial9 = &uart10;
39 ethernet0 = &cpsw_emac0;
40 ethernet1 = &cpsw_emac1;
41 d_can0 = &dcan1;
42 d_can1 = &dcan2;
43 spi0 = &qspi;
44 };
45
46 timer {
47 compatible = "arm,armv7-timer";
48 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
49 <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
50 <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
51 <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
52 interrupt-parent = <&gic>;
53 };
54
55 gic: interrupt-controller@48211000 {
56 compatible = "arm,cortex-a15-gic";
57 interrupt-controller;
58 #interrupt-cells = <3>;
59 reg = <0x0 0x48211000 0x0 0x1000>,
60 <0x0 0x48212000 0x0 0x2000>,
61 <0x0 0x48214000 0x0 0x2000>,
62 <0x0 0x48216000 0x0 0x2000>;
63 interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
64 interrupt-parent = <&gic>;
65 };
66
67 wakeupgen: interrupt-controller@48281000 {
68 compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu";
69 interrupt-controller;
70 #interrupt-cells = <3>;
71 reg = <0x0 0x48281000 0x0 0x1000>;
72 interrupt-parent = <&gic>;
73 };
74
75 cpus {
76 #address-cells = <1>;
77 #size-cells = <0>;
78
79 cpu0: cpu@0 {
80 device_type = "cpu";
81 compatible = "arm,cortex-a15";
82 reg = <0>;
83
84 operating-points-v2 = <&cpu0_opp_table>;
85
86 clocks = <&dpll_mpu_ck>;
87 clock-names = "cpu";
88
89 clock-latency = <300000>; /* From omap-cpufreq driver */
90
91 /* cooling options */
92 cooling-min-level = <0>;
93 cooling-max-level = <2>;
94 #cooling-cells = <2>; /* min followed by max */
95 };
96 };
97
98 cpu0_opp_table: opp-table {
99 compatible = "operating-points-v2-ti-cpu";
100 syscon = <&scm_wkup>;
101
102 opp_nom-1000000000 {
103 opp-hz = /bits/ 64 <1000000000>;
104 opp-microvolt = <1060000 850000 1150000>;
105 opp-supported-hw = <0xFF 0x01>;
106 opp-suspend;
107 };
108
109 opp_od-1176000000 {
110 opp-hz = /bits/ 64 <1176000000>;
111 opp-microvolt = <1160000 885000 1160000>;
112 opp-supported-hw = <0xFF 0x02>;
113 };
114 };
115
116 /*
117 * The soc node represents the soc top level view. It is used for IPs
118 * that are not memory mapped in the MPU view or for the MPU itself.
119 */
120 soc {
121 compatible = "ti,omap-infra";
122 mpu {
123 compatible = "ti,omap5-mpu";
124 ti,hwmods = "mpu";
125 };
126 };
127
128 /*
129 * XXX: Use a flat representation of the SOC interconnect.
130 * The real OMAP interconnect network is quite complex.
131 * Since it will not bring real advantage to represent that in DT for
132 * the moment, just use a fake OCP bus entry to represent the whole bus
133 * hierarchy.
134 */
135 ocp {
136 compatible = "ti,dra7-l3-noc", "simple-bus";
137 #address-cells = <1>;
138 #size-cells = <1>;
139 ranges = <0x0 0x0 0x0 0xc0000000>;
140 ti,hwmods = "l3_main_1", "l3_main_2";
141 reg = <0x0 0x44000000 0x0 0x1000000>,
142 <0x0 0x45000000 0x0 0x1000>;
143 interrupts-extended = <&crossbar_mpu GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
144 <&wakeupgen GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
145
146 l4_cfg: l4@4a000000 {
147 compatible = "ti,dra7-l4-cfg", "simple-bus";
148 #address-cells = <1>;
149 #size-cells = <1>;
150 ranges = <0 0x4a000000 0x22c000>;
151
152 scm: scm@2000 {
153 compatible = "ti,dra7-scm-core", "simple-bus";
154 reg = <0x2000 0x2000>;
155 #address-cells = <1>;
156 #size-cells = <1>;
157 ranges = <0 0x2000 0x2000>;
158
159 scm_conf: scm_conf@0 {
160 compatible = "syscon", "simple-bus";
161 reg = <0x0 0x1400>;
162 #address-cells = <1>;
163 #size-cells = <1>;
164 ranges = <0 0x0 0x1400>;
165
166 pbias_regulator: pbias_regulator@e00 {
167 compatible = "ti,pbias-dra7", "ti,pbias-omap";
168 reg = <0xe00 0x4>;
169 syscon = <&scm_conf>;
170 pbias_mmc_reg: pbias_mmc_omap5 {
171 regulator-name = "pbias_mmc_omap5";
172 regulator-min-microvolt = <1800000>;
173 regulator-max-microvolt = <3000000>;
174 };
175 };
176
177 scm_conf_clocks: clocks {
178 #address-cells = <1>;
179 #size-cells = <0>;
180 };
181 };
182
183 dra7_pmx_core: pinmux@1400 {
184 compatible = "ti,dra7-padconf",
185 "pinctrl-single";
186 reg = <0x1400 0x0468>;
187 #address-cells = <1>;
188 #size-cells = <0>;
189 #pinctrl-cells = <1>;
190 #interrupt-cells = <1>;
191 interrupt-controller;
192 pinctrl-single,register-width = <32>;
193 pinctrl-single,function-mask = <0x3fffffff>;
194 };
195
196 scm_conf1: scm_conf@1c04 {
197 compatible = "syscon";
198 reg = <0x1c04 0x0020>;
199 #syscon-cells = <2>;
200 };
201
202 scm_conf_pcie: scm_conf@1c24 {
203 compatible = "syscon";
204 reg = <0x1c24 0x0024>;
205 };
206
207 sdma_xbar: dma-router@b78 {
208 compatible = "ti,dra7-dma-crossbar";
209 reg = <0xb78 0xfc>;
210 #dma-cells = <1>;
211 dma-requests = <205>;
212 ti,dma-safe-map = <0>;
213 dma-masters = <&sdma>;
214 };
215
216 edma_xbar: dma-router@c78 {
217 compatible = "ti,dra7-dma-crossbar";
218 reg = <0xc78 0x7c>;
219 #dma-cells = <2>;
220 dma-requests = <204>;
221 ti,dma-safe-map = <0>;
222 dma-masters = <&edma>;
223 };
224 };
225
226 cm_core_aon: cm_core_aon@5000 {
227 compatible = "ti,dra7-cm-core-aon";
228 reg = <0x5000 0x2000>;
229
230 cm_core_aon_clocks: clocks {
231 #address-cells = <1>;
232 #size-cells = <0>;
233 };
234
235 cm_core_aon_clockdomains: clockdomains {
236 };
237 };
238
239 cm_core: cm_core@8000 {
240 compatible = "ti,dra7-cm-core";
241 reg = <0x8000 0x3000>;
242
243 cm_core_clocks: clocks {
244 #address-cells = <1>;
245 #size-cells = <0>;
246 };
247
248 cm_core_clockdomains: clockdomains {
249 };
250 };
251 };
252
253 l4_wkup: l4@4ae00000 {
254 compatible = "ti,dra7-l4-wkup", "simple-bus";
255 #address-cells = <1>;
256 #size-cells = <1>;
257 ranges = <0 0x4ae00000 0x3f000>;
258
259 counter32k: counter@4000 {
260 compatible = "ti,omap-counter32k";
261 reg = <0x4000 0x40>;
262 ti,hwmods = "counter_32k";
263 };
264
265 prm: prm@6000 {
266 compatible = "ti,dra7-prm";
267 reg = <0x6000 0x3000>;
268 interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
269
270 prm_clocks: clocks {
271 #address-cells = <1>;
272 #size-cells = <0>;
273 };
274
275 prm_clockdomains: clockdomains {
276 };
277 };
278
279 scm_wkup: scm_conf@c000 {
280 compatible = "syscon";
281 reg = <0xc000 0x1000>;
282 };
283 };
284
285 axi@0 {
286 compatible = "simple-bus";
287 #size-cells = <1>;
288 #address-cells = <1>;
289 ranges = <0x51000000 0x51000000 0x3000
290 0x0 0x20000000 0x10000000>;
291 /**
292 * To enable PCI endpoint mode, disable the pcie1_rc
293 * node and enable pcie1_ep mode.
294 */
295 pcie1_rc: pcie@51000000 {
296 compatible = "ti,dra7-pcie";
297 reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>;
298 reg-names = "rc_dbics", "ti_conf", "config";
299 interrupts = <0 232 0x4>, <0 233 0x4>;
300 #address-cells = <3>;
301 #size-cells = <2>;
302 device_type = "pci";
303 ranges = <0x81000000 0 0 0x03000 0 0x00010000
304 0x82000000 0 0x20013000 0x13000 0 0xffed000>;
305 bus-range = <0x00 0xff>;
306 #interrupt-cells = <1>;
307 num-lanes = <1>;
308 linux,pci-domain = <0>;
309 ti,hwmods = "pcie1";
310 phys = <&pcie1_phy>;
311 phy-names = "pcie-phy0";
312 interrupt-map-mask = <0 0 0 7>;
313 interrupt-map = <0 0 0 1 &pcie1_intc 1>,
314 <0 0 0 2 &pcie1_intc 2>,
315 <0 0 0 3 &pcie1_intc 3>,
316 <0 0 0 4 &pcie1_intc 4>;
317 status = "disabled";
318 pcie1_intc: interrupt-controller {
319 interrupt-controller;
320 #address-cells = <0>;
321 #interrupt-cells = <1>;
322 };
323 };
324
325 pcie1_ep: pcie_ep@51000000 {
326 compatible = "ti,dra7-pcie-ep";
327 reg = <0x51000000 0x28>, <0x51002000 0x14c>, <0x51001000 0x28>, <0x1000 0x10000000>;
328 reg-names = "ep_dbics", "ti_conf", "ep_dbics2", "addr_space";
329 interrupts = <0 232 0x4>;
330 num-lanes = <1>;
331 num-ib-windows = <4>;
332 num-ob-windows = <16>;
333 ti,hwmods = "pcie1";
334 phys = <&pcie1_phy>;
335 phy-names = "pcie-phy0";
336 ti,syscon-unaligned-access = <&scm_conf1 0x14 2>;
337 status = "disabled";
338 };
339 };
340
341 axi@1 {
342 compatible = "simple-bus";
343 #size-cells = <1>;
344 #address-cells = <1>;
345 ranges = <0x51800000 0x51800000 0x3000
346 0x0 0x30000000 0x10000000>;
347 status = "disabled";
348 pcie@51800000 {
349 compatible = "ti,dra7-pcie";
350 reg = <0x51800000 0x2000>, <0x51802000 0x14c>, <0x1000 0x2000>;
351 reg-names = "rc_dbics", "ti_conf", "config";
352 interrupts = <0 355 0x4>, <0 356 0x4>;
353 #address-cells = <3>;
354 #size-cells = <2>;
355 device_type = "pci";
356 ranges = <0x81000000 0 0 0x03000 0 0x00010000
357 0x82000000 0 0x30013000 0x13000 0 0xffed000>;
358 bus-range = <0x00 0xff>;
359 #interrupt-cells = <1>;
360 num-lanes = <1>;
361 linux,pci-domain = <1>;
362 ti,hwmods = "pcie2";
363 phys = <&pcie2_phy>;
364 phy-names = "pcie-phy0";
365 interrupt-map-mask = <0 0 0 7>;
366 interrupt-map = <0 0 0 1 &pcie2_intc 1>,
367 <0 0 0 2 &pcie2_intc 2>,
368 <0 0 0 3 &pcie2_intc 3>,
369 <0 0 0 4 &pcie2_intc 4>;
370 pcie2_intc: interrupt-controller {
371 interrupt-controller;
372 #address-cells = <0>;
373 #interrupt-cells = <1>;
374 };
375 };
376 };
377
378 ocmcram1: ocmcram@40300000 {
379 compatible = "mmio-sram";
380 reg = <0x40300000 0x80000>;
381 ranges = <0x0 0x40300000 0x80000>;
382 #address-cells = <1>;
383 #size-cells = <1>;
384 /*
385 * This is a placeholder for an optional reserved
386 * region for use by secure software. The size
387 * of this region is not known until runtime so it
388 * is set as zero to either be updated to reserve
389 * space or left unchanged to leave all SRAM for use.
390 * On HS parts that that require the reserved region
391 * either the bootloader can update the size to
392 * the required amount or the node can be overridden
393 * from the board dts file for the secure platform.
394 */
395 sram-hs@0 {
396 compatible = "ti,secure-ram";
397 reg = <0x0 0x0>;
398 };
399 };
400
401 /*
402 * NOTE: ocmcram2 and ocmcram3 are not available on all
403 * DRA7xx and AM57xx variants. Confirm availability in
404 * the data manual for the exact part number in use
405 * before enabling these nodes in the board dts file.
406 */
407 ocmcram2: ocmcram@40400000 {
408 status = "disabled";
409 compatible = "mmio-sram";
410 reg = <0x40400000 0x100000>;
411 ranges = <0x0 0x40400000 0x100000>;
412 #address-cells = <1>;
413 #size-cells = <1>;
414 };
415
416 ocmcram3: ocmcram@40500000 {
417 status = "disabled";
418 compatible = "mmio-sram";
419 reg = <0x40500000 0x100000>;
420 ranges = <0x0 0x40500000 0x100000>;
421 #address-cells = <1>;
422 #size-cells = <1>;
423 };
424
425 bandgap: bandgap@4a0021e0 {
426 reg = <0x4a0021e0 0xc
427 0x4a00232c 0xc
428 0x4a002380 0x2c
429 0x4a0023C0 0x3c
430 0x4a002564 0x8
431 0x4a002574 0x50>;
432 compatible = "ti,dra752-bandgap";
433 interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
434 #thermal-sensor-cells = <1>;
435 };
436
437 dsp1_system: dsp_system@40d00000 {
438 compatible = "syscon";
439 reg = <0x40d00000 0x100>;
440 };
441
442 dra7_iodelay_core: padconf@4844a000 {
443 compatible = "ti,dra7-iodelay";
444 reg = <0x4844a000 0x0d1c>;
445 #address-cells = <1>;
446 #size-cells = <0>;
447 #pinctrl-cells = <2>;
448 };
449
450 sdma: dma-controller@4a056000 {
451 compatible = "ti,omap4430-sdma";
452 reg = <0x4a056000 0x1000>;
453 interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
454 <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
455 <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
456 <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
457 #dma-cells = <1>;
458 dma-channels = <32>;
459 dma-requests = <127>;
460 };
461
462 edma: edma@43300000 {
463 compatible = "ti,edma3-tpcc";
464 ti,hwmods = "tpcc";
465 reg = <0x43300000 0x100000>;
466 reg-names = "edma3_cc";
467 interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
468 <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
469 <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
470 interrupt-names = "edma3_ccint", "edma3_mperr",
471 "edma3_ccerrint";
472 dma-requests = <64>;
473 #dma-cells = <2>;
474
475 ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 0>;
476
477 /*
478 * memcpy is disabled, can be enabled with:
479 * ti,edma-memcpy-channels = <20 21>;
480 * for example. Note that these channels need to be
481 * masked in the xbar as well.
482 */
483 };
484
485 edma_tptc0: tptc@43400000 {
486 compatible = "ti,edma3-tptc";
487 ti,hwmods = "tptc0";
488 reg = <0x43400000 0x100000>;
489 interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
490 interrupt-names = "edma3_tcerrint";
491 };
492
493 edma_tptc1: tptc@43500000 {
494 compatible = "ti,edma3-tptc";
495 ti,hwmods = "tptc1";
496 reg = <0x43500000 0x100000>;
497 interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
498 interrupt-names = "edma3_tcerrint";
499 };
500
501 gpio1: gpio@4ae10000 {
502 compatible = "ti,omap4-gpio";
503 reg = <0x4ae10000 0x200>;
504 interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
505 ti,hwmods = "gpio1";
506 gpio-controller;
507 #gpio-cells = <2>;
508 interrupt-controller;
509 #interrupt-cells = <2>;
510 };
511
512 gpio2: gpio@48055000 {
513 compatible = "ti,omap4-gpio";
514 reg = <0x48055000 0x200>;
515 interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
516 ti,hwmods = "gpio2";
517 gpio-controller;
518 #gpio-cells = <2>;
519 interrupt-controller;
520 #interrupt-cells = <2>;
521 };
522
523 gpio3: gpio@48057000 {
524 compatible = "ti,omap4-gpio";
525 reg = <0x48057000 0x200>;
526 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
527 ti,hwmods = "gpio3";
528 gpio-controller;
529 #gpio-cells = <2>;
530 interrupt-controller;
531 #interrupt-cells = <2>;
532 };
533
534 gpio4: gpio@48059000 {
535 compatible = "ti,omap4-gpio";
536 reg = <0x48059000 0x200>;
537 interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
538 ti,hwmods = "gpio4";
539 gpio-controller;
540 #gpio-cells = <2>;
541 interrupt-controller;
542 #interrupt-cells = <2>;
543 };
544
545 gpio5: gpio@4805b000 {
546 compatible = "ti,omap4-gpio";
547 reg = <0x4805b000 0x200>;
548 interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
549 ti,hwmods = "gpio5";
550 gpio-controller;
551 #gpio-cells = <2>;
552 interrupt-controller;
553 #interrupt-cells = <2>;
554 };
555
556 gpio6: gpio@4805d000 {
557 compatible = "ti,omap4-gpio";
558 reg = <0x4805d000 0x200>;
559 interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
560 ti,hwmods = "gpio6";
561 gpio-controller;
562 #gpio-cells = <2>;
563 interrupt-controller;
564 #interrupt-cells = <2>;
565 };
566
567 gpio7: gpio@48051000 {
568 compatible = "ti,omap4-gpio";
569 reg = <0x48051000 0x200>;
570 interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
571 ti,hwmods = "gpio7";
572 gpio-controller;
573 #gpio-cells = <2>;
574 interrupt-controller;
575 #interrupt-cells = <2>;
576 };
577
578 gpio8: gpio@48053000 {
579 compatible = "ti,omap4-gpio";
580 reg = <0x48053000 0x200>;
581 interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
582 ti,hwmods = "gpio8";
583 gpio-controller;
584 #gpio-cells = <2>;
585 interrupt-controller;
586 #interrupt-cells = <2>;
587 };
588
589 uart1: serial@4806a000 {
590 compatible = "ti,dra742-uart", "ti,omap4-uart";
591 reg = <0x4806a000 0x100>;
592 interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
593 ti,hwmods = "uart1";
594 clock-frequency = <48000000>;
595 status = "disabled";
596 dmas = <&sdma_xbar 49>, <&sdma_xbar 50>;
597 dma-names = "tx", "rx";
598 };
599
600 uart2: serial@4806c000 {
601 compatible = "ti,dra742-uart", "ti,omap4-uart";
602 reg = <0x4806c000 0x100>;
603 interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
604 ti,hwmods = "uart2";
605 clock-frequency = <48000000>;
606 status = "disabled";
607 dmas = <&sdma_xbar 51>, <&sdma_xbar 52>;
608 dma-names = "tx", "rx";
609 };
610
611 uart3: serial@48020000 {
612 compatible = "ti,dra742-uart", "ti,omap4-uart";
613 reg = <0x48020000 0x100>;
614 interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
615 ti,hwmods = "uart3";
616 clock-frequency = <48000000>;
617 status = "disabled";
618 dmas = <&sdma_xbar 53>, <&sdma_xbar 54>;
619 dma-names = "tx", "rx";
620 };
621
622 uart4: serial@4806e000 {
623 compatible = "ti,dra742-uart", "ti,omap4-uart";
624 reg = <0x4806e000 0x100>;
625 interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
626 ti,hwmods = "uart4";
627 clock-frequency = <48000000>;
628 status = "disabled";
629 dmas = <&sdma_xbar 55>, <&sdma_xbar 56>;
630 dma-names = "tx", "rx";
631 };
632
633 uart5: serial@48066000 {
634 compatible = "ti,dra742-uart", "ti,omap4-uart";
635 reg = <0x48066000 0x100>;
636 interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
637 ti,hwmods = "uart5";
638 clock-frequency = <48000000>;
639 status = "disabled";
640 dmas = <&sdma_xbar 63>, <&sdma_xbar 64>;
641 dma-names = "tx", "rx";
642 };
643
644 uart6: serial@48068000 {
645 compatible = "ti,dra742-uart", "ti,omap4-uart";
646 reg = <0x48068000 0x100>;
647 interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
648 ti,hwmods = "uart6";
649 clock-frequency = <48000000>;
650 status = "disabled";
651 dmas = <&sdma_xbar 79>, <&sdma_xbar 80>;
652 dma-names = "tx", "rx";
653 };
654
655 uart7: serial@48420000 {
656 compatible = "ti,dra742-uart", "ti,omap4-uart";
657 reg = <0x48420000 0x100>;
658 interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
659 ti,hwmods = "uart7";
660 clock-frequency = <48000000>;
661 status = "disabled";
662 };
663
664 uart8: serial@48422000 {
665 compatible = "ti,dra742-uart", "ti,omap4-uart";
666 reg = <0x48422000 0x100>;
667 interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
668 ti,hwmods = "uart8";
669 clock-frequency = <48000000>;
670 status = "disabled";
671 };
672
673 uart9: serial@48424000 {
674 compatible = "ti,dra742-uart", "ti,omap4-uart";
675 reg = <0x48424000 0x100>;
676 interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
677 ti,hwmods = "uart9";
678 clock-frequency = <48000000>;
679 status = "disabled";
680 };
681
682 uart10: serial@4ae2b000 {
683 compatible = "ti,dra742-uart", "ti,omap4-uart";
684 reg = <0x4ae2b000 0x100>;
685 interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
686 ti,hwmods = "uart10";
687 clock-frequency = <48000000>;
688 status = "disabled";
689 };
690
691 mailbox1: mailbox@4a0f4000 {
692 compatible = "ti,omap4-mailbox";
693 reg = <0x4a0f4000 0x200>;
694 interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
695 <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
696 <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
697 ti,hwmods = "mailbox1";
698 #mbox-cells = <1>;
699 ti,mbox-num-users = <3>;
700 ti,mbox-num-fifos = <8>;
701 status = "disabled";
702 };
703
704 mailbox2: mailbox@4883a000 {
705 compatible = "ti,omap4-mailbox";
706 reg = <0x4883a000 0x200>;
707 interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>,
708 <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
709 <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>,
710 <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
711 ti,hwmods = "mailbox2";
712 #mbox-cells = <1>;
713 ti,mbox-num-users = <4>;
714 ti,mbox-num-fifos = <12>;
715 status = "disabled";
716 };
717
718 mailbox3: mailbox@4883c000 {
719 compatible = "ti,omap4-mailbox";
720 reg = <0x4883c000 0x200>;
721 interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>,
722 <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
723 <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>,
724 <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;
725 ti,hwmods = "mailbox3";
726 #mbox-cells = <1>;
727 ti,mbox-num-users = <4>;
728 ti,mbox-num-fifos = <12>;
729 status = "disabled";
730 };
731
732 mailbox4: mailbox@4883e000 {
733 compatible = "ti,omap4-mailbox";
734 reg = <0x4883e000 0x200>;
735 interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
736 <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
737 <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
738 <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
739 ti,hwmods = "mailbox4";
740 #mbox-cells = <1>;
741 ti,mbox-num-users = <4>;
742 ti,mbox-num-fifos = <12>;
743 status = "disabled";
744 };
745
746 mailbox5: mailbox@48840000 {
747 compatible = "ti,omap4-mailbox";
748 reg = <0x48840000 0x200>;
749 interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
750 <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
751 <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
752 <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>;
753 ti,hwmods = "mailbox5";
754 #mbox-cells = <1>;
755 ti,mbox-num-users = <4>;
756 ti,mbox-num-fifos = <12>;
757 status = "disabled";
758 };
759
760 mailbox6: mailbox@48842000 {
761 compatible = "ti,omap4-mailbox";
762 reg = <0x48842000 0x200>;
763 interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
764 <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
765 <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
766 <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
767 ti,hwmods = "mailbox6";
768 #mbox-cells = <1>;
769 ti,mbox-num-users = <4>;
770 ti,mbox-num-fifos = <12>;
771 status = "disabled";
772 };
773
774 mailbox7: mailbox@48844000 {
775 compatible = "ti,omap4-mailbox";
776 reg = <0x48844000 0x200>;
777 interrupts = <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
778 <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
779 <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
780 <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>;
781 ti,hwmods = "mailbox7";
782 #mbox-cells = <1>;
783 ti,mbox-num-users = <4>;
784 ti,mbox-num-fifos = <12>;
785 status = "disabled";
786 };
787
788 mailbox8: mailbox@48846000 {
789 compatible = "ti,omap4-mailbox";
790 reg = <0x48846000 0x200>;
791 interrupts = <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
792 <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
793 <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
794 <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>;
795 ti,hwmods = "mailbox8";
796 #mbox-cells = <1>;
797 ti,mbox-num-users = <4>;
798 ti,mbox-num-fifos = <12>;
799 status = "disabled";
800 };
801
802 mailbox9: mailbox@4885e000 {
803 compatible = "ti,omap4-mailbox";
804 reg = <0x4885e000 0x200>;
805 interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
806 <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
807 <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
808 <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
809 ti,hwmods = "mailbox9";
810 #mbox-cells = <1>;
811 ti,mbox-num-users = <4>;
812 ti,mbox-num-fifos = <12>;
813 status = "disabled";
814 };
815
816 mailbox10: mailbox@48860000 {
817 compatible = "ti,omap4-mailbox";
818 reg = <0x48860000 0x200>;
819 interrupts = <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
820 <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>,
821 <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
822 <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
823 ti,hwmods = "mailbox10";
824 #mbox-cells = <1>;
825 ti,mbox-num-users = <4>;
826 ti,mbox-num-fifos = <12>;
827 status = "disabled";
828 };
829
830 mailbox11: mailbox@48862000 {
831 compatible = "ti,omap4-mailbox";
832 reg = <0x48862000 0x200>;
833 interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
834 <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
835 <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
836 <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>;
837 ti,hwmods = "mailbox11";
838 #mbox-cells = <1>;
839 ti,mbox-num-users = <4>;
840 ti,mbox-num-fifos = <12>;
841 status = "disabled";
842 };
843
844 mailbox12: mailbox@48864000 {
845 compatible = "ti,omap4-mailbox";
846 reg = <0x48864000 0x200>;
847 interrupts = <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
848 <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
849 <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
850 <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>;
851 ti,hwmods = "mailbox12";
852 #mbox-cells = <1>;
853 ti,mbox-num-users = <4>;
854 ti,mbox-num-fifos = <12>;
855 status = "disabled";
856 };
857
858 mailbox13: mailbox@48802000 {
859 compatible = "ti,omap4-mailbox";
860 reg = <0x48802000 0x200>;
861 interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>,
862 <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>,
863 <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>,
864 <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>;
865 ti,hwmods = "mailbox13";
866 #mbox-cells = <1>;
867 ti,mbox-num-users = <4>;
868 ti,mbox-num-fifos = <12>;
869 status = "disabled";
870 };
871
872 timer1: timer@4ae18000 {
873 compatible = "ti,omap5430-timer";
874 reg = <0x4ae18000 0x80>;
875 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
876 ti,hwmods = "timer1";
877 ti,timer-alwon;
878 };
879
880 timer2: timer@48032000 {
881 compatible = "ti,omap5430-timer";
882 reg = <0x48032000 0x80>;
883 interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
884 ti,hwmods = "timer2";
885 };
886
887 timer3: timer@48034000 {
888 compatible = "ti,omap5430-timer";
889 reg = <0x48034000 0x80>;
890 interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
891 ti,hwmods = "timer3";
892 };
893
894 timer4: timer@48036000 {
895 compatible = "ti,omap5430-timer";
896 reg = <0x48036000 0x80>;
897 interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
898 ti,hwmods = "timer4";
899 };
900
901 timer5: timer@48820000 {
902 compatible = "ti,omap5430-timer";
903 reg = <0x48820000 0x80>;
904 interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
905 ti,hwmods = "timer5";
906 };
907
908 timer6: timer@48822000 {
909 compatible = "ti,omap5430-timer";
910 reg = <0x48822000 0x80>;
911 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
912 ti,hwmods = "timer6";
913 };
914
915 timer7: timer@48824000 {
916 compatible = "ti,omap5430-timer";
917 reg = <0x48824000 0x80>;
918 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
919 ti,hwmods = "timer7";
920 };
921
922 timer8: timer@48826000 {
923 compatible = "ti,omap5430-timer";
924 reg = <0x48826000 0x80>;
925 interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
926 ti,hwmods = "timer8";
927 };
928
929 timer9: timer@4803e000 {
930 compatible = "ti,omap5430-timer";
931 reg = <0x4803e000 0x80>;
932 interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
933 ti,hwmods = "timer9";
934 };
935
936 timer10: timer@48086000 {
937 compatible = "ti,omap5430-timer";
938 reg = <0x48086000 0x80>;
939 interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
940 ti,hwmods = "timer10";
941 };
942
943 timer11: timer@48088000 {
944 compatible = "ti,omap5430-timer";
945 reg = <0x48088000 0x80>;
946 interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
947 ti,hwmods = "timer11";
948 };
949
950 timer12: timer@4ae20000 {
951 compatible = "ti,omap5430-timer";
952 reg = <0x4ae20000 0x80>;
953 interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
954 ti,hwmods = "timer12";
955 ti,timer-alwon;
956 ti,timer-secure;
957 };
958
959 timer13: timer@48828000 {
960 compatible = "ti,omap5430-timer";
961 reg = <0x48828000 0x80>;
962 interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
963 ti,hwmods = "timer13";
964 };
965
966 timer14: timer@4882a000 {
967 compatible = "ti,omap5430-timer";
968 reg = <0x4882a000 0x80>;
969 interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>;
970 ti,hwmods = "timer14";
971 };
972
973 timer15: timer@4882c000 {
974 compatible = "ti,omap5430-timer";
975 reg = <0x4882c000 0x80>;
976 interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
977 ti,hwmods = "timer15";
978 };
979
980 timer16: timer@4882e000 {
981 compatible = "ti,omap5430-timer";
982 reg = <0x4882e000 0x80>;
983 interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>;
984 ti,hwmods = "timer16";
985 };
986
987 wdt2: wdt@4ae14000 {
988 compatible = "ti,omap3-wdt";
989 reg = <0x4ae14000 0x80>;
990 interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
991 ti,hwmods = "wd_timer2";
992 };
993
994 hwspinlock: spinlock@4a0f6000 {
995 compatible = "ti,omap4-hwspinlock";
996 reg = <0x4a0f6000 0x1000>;
997 ti,hwmods = "spinlock";
998 #hwlock-cells = <1>;
999 };
1000
1001 dmm@4e000000 {
1002 compatible = "ti,omap5-dmm";
1003 reg = <0x4e000000 0x800>;
1004 interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
1005 ti,hwmods = "dmm";
1006 };
1007
1008 i2c1: i2c@48070000 {
1009 compatible = "ti,omap4-i2c";
1010 reg = <0x48070000 0x100>;
1011 interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
1012 #address-cells = <1>;
1013 #size-cells = <0>;
1014 ti,hwmods = "i2c1";
1015 status = "disabled";
1016 };
1017
1018 i2c2: i2c@48072000 {
1019 compatible = "ti,omap4-i2c";
1020 reg = <0x48072000 0x100>;
1021 interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
1022 #address-cells = <1>;
1023 #size-cells = <0>;
1024 ti,hwmods = "i2c2";
1025 status = "disabled";
1026 };
1027
1028 i2c3: i2c@48060000 {
1029 compatible = "ti,omap4-i2c";
1030 reg = <0x48060000 0x100>;
1031 interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
1032 #address-cells = <1>;
1033 #size-cells = <0>;
1034 ti,hwmods = "i2c3";
1035 status = "disabled";
1036 };
1037
1038 i2c4: i2c@4807a000 {
1039 compatible = "ti,omap4-i2c";
1040 reg = <0x4807a000 0x100>;
1041 interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
1042 #address-cells = <1>;
1043 #size-cells = <0>;
1044 ti,hwmods = "i2c4";
1045 status = "disabled";
1046 };
1047
1048 i2c5: i2c@4807c000 {
1049 compatible = "ti,omap4-i2c";
1050 reg = <0x4807c000 0x100>;
1051 interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
1052 #address-cells = <1>;
1053 #size-cells = <0>;
1054 ti,hwmods = "i2c5";
1055 status = "disabled";
1056 };
1057
1058 mmc1: mmc@4809c000 {
1059 compatible = "ti,dra7-hsmmc", "ti,omap4-hsmmc";
1060 reg = <0x4809c000 0x400>;
1061 interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
1062 ti,hwmods = "mmc1";
1063 ti,dual-volt;
1064 ti,needs-special-reset;
1065 dmas = <&sdma_xbar 61>, <&sdma_xbar 62>;
1066 dma-names = "tx", "rx";
1067 status = "disabled";
1068 pbias-supply = <&pbias_mmc_reg>;
1069 max-frequency = <192000000>;
1070 };
1071
1072 mmc2: mmc@480b4000 {
1073 compatible = "ti,dra7-hsmmc", "ti,omap4-hsmmc";
1074 reg = <0x480b4000 0x400>;
1075 interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
1076 ti,hwmods = "mmc2";
1077 ti,needs-special-reset;
1078 dmas = <&sdma_xbar 47>, <&sdma_xbar 48>;
1079 dma-names = "tx", "rx";
1080 status = "disabled";
1081 max-frequency = <192000000>;
1082 };
1083
1084 mmc3: mmc@480ad000 {
1085 compatible = "ti,dra7-hsmmc", "ti,omap4-hsmmc";
1086 reg = <0x480ad000 0x400>;
1087 interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
1088 ti,hwmods = "mmc3";
1089 ti,needs-special-reset;
1090 dmas = <&sdma_xbar 77>, <&sdma_xbar 78>;
1091 dma-names = "tx", "rx";
1092 status = "disabled";
1093 /* Errata i887 limits max-frequency of MMC3 to 64 MHz */
1094 max-frequency = <64000000>;
1095 };
1096
1097 mmc4: mmc@480d1000 {
1098 compatible = "ti,dra7-hsmmc", "ti,omap4-hsmmc";
1099 reg = <0x480d1000 0x400>;
1100 interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
1101 ti,hwmods = "mmc4";
1102 ti,needs-special-reset;
1103 dmas = <&sdma_xbar 57>, <&sdma_xbar 58>;
1104 dma-names = "tx", "rx";
1105 status = "disabled";
1106 max-frequency = <192000000>;
1107 };
1108
1109 mmu0_dsp1: mmu@40d01000 {
1110 compatible = "ti,dra7-dsp-iommu";
1111 reg = <0x40d01000 0x100>;
1112 interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
1113 ti,hwmods = "mmu0_dsp1";
1114 #iommu-cells = <0>;
1115 ti,syscon-mmuconfig = <&dsp1_system 0x0>;
1116 status = "disabled";
1117 };
1118
1119 mmu1_dsp1: mmu@40d02000 {
1120 compatible = "ti,dra7-dsp-iommu";
1121 reg = <0x40d02000 0x100>;
1122 interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
1123 ti,hwmods = "mmu1_dsp1";
1124 #iommu-cells = <0>;
1125 ti,syscon-mmuconfig = <&dsp1_system 0x1>;
1126 status = "disabled";
1127 };
1128
1129 mmu_ipu1: mmu@58882000 {
1130 compatible = "ti,dra7-iommu";
1131 reg = <0x58882000 0x100>;
1132 interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>;
1133 ti,hwmods = "mmu_ipu1";
1134 #iommu-cells = <0>;
1135 ti,iommu-bus-err-back;
1136 status = "disabled";
1137 };
1138
1139 mmu_ipu2: mmu@55082000 {
1140 compatible = "ti,dra7-iommu";
1141 reg = <0x55082000 0x100>;
1142 interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>;
1143 ti,hwmods = "mmu_ipu2";
1144 #iommu-cells = <0>;
1145 ti,iommu-bus-err-back;
1146 status = "disabled";
1147 };
1148
1149 abb_mpu: regulator-abb-mpu {
1150 compatible = "ti,abb-v3";
1151 regulator-name = "abb_mpu";
1152 #address-cells = <0>;
1153 #size-cells = <0>;
1154 clocks = <&sys_clkin1>;
1155 ti,settling-time = <50>;
1156 ti,clock-cycles = <16>;
1157
1158 reg = <0x4ae07ddc 0x4>, <0x4ae07de0 0x4>,
1159 <0x4ae06014 0x4>, <0x4a003b20 0xc>,
1160 <0x4ae0c158 0x4>;
1161 reg-names = "setup-address", "control-address",
1162 "int-address", "efuse-address",
1163 "ldo-address";
1164 ti,tranxdone-status-mask = <0x80>;
1165 /* LDOVBBMPU_FBB_MUX_CTRL */
1166 ti,ldovbb-override-mask = <0x400>;
1167 /* LDOVBBMPU_FBB_VSET_OUT */
1168 ti,ldovbb-vset-mask = <0x1F>;
1169
1170 /*
1171 * NOTE: only FBB mode used but actual vset will
1172 * determine final biasing
1173 */
1174 ti,abb_info = <
1175 /*uV ABB efuse rbb_m fbb_m vset_m*/
1176 1060000 0 0x0 0 0x02000000 0x01F00000
1177 1160000 0 0x4 0 0x02000000 0x01F00000
1178 1210000 0 0x8 0 0x02000000 0x01F00000
1179 >;
1180 };
1181
1182 abb_ivahd: regulator-abb-ivahd {
1183 compatible = "ti,abb-v3";
1184 regulator-name = "abb_ivahd";
1185 #address-cells = <0>;
1186 #size-cells = <0>;
1187 clocks = <&sys_clkin1>;
1188 ti,settling-time = <50>;
1189 ti,clock-cycles = <16>;
1190
1191 reg = <0x4ae07e34 0x4>, <0x4ae07e24 0x4>,
1192 <0x4ae06010 0x4>, <0x4a0025cc 0xc>,
1193 <0x4a002470 0x4>;
1194 reg-names = "setup-address", "control-address",
1195 "int-address", "efuse-address",
1196 "ldo-address";
1197 ti,tranxdone-status-mask = <0x40000000>;
1198 /* LDOVBBIVA_FBB_MUX_CTRL */
1199 ti,ldovbb-override-mask = <0x400>;
1200 /* LDOVBBIVA_FBB_VSET_OUT */
1201 ti,ldovbb-vset-mask = <0x1F>;
1202
1203 /*
1204 * NOTE: only FBB mode used but actual vset will
1205 * determine final biasing
1206 */
1207 ti,abb_info = <
1208 /*uV ABB efuse rbb_m fbb_m vset_m*/
1209 1055000 0 0x0 0 0x02000000 0x01F00000
1210 1150000 0 0x4 0 0x02000000 0x01F00000
1211 1250000 0 0x8 0 0x02000000 0x01F00000
1212 >;
1213 };
1214
1215 abb_dspeve: regulator-abb-dspeve {
1216 compatible = "ti,abb-v3";
1217 regulator-name = "abb_dspeve";
1218 #address-cells = <0>;
1219 #size-cells = <0>;
1220 clocks = <&sys_clkin1>;
1221 ti,settling-time = <50>;
1222 ti,clock-cycles = <16>;
1223
1224 reg = <0x4ae07e30 0x4>, <0x4ae07e20 0x4>,
1225 <0x4ae06010 0x4>, <0x4a0025e0 0xc>,
1226 <0x4a00246c 0x4>;
1227 reg-names = "setup-address", "control-address",
1228 "int-address", "efuse-address",
1229 "ldo-address";
1230 ti,tranxdone-status-mask = <0x20000000>;
1231 /* LDOVBBDSPEVE_FBB_MUX_CTRL */
1232 ti,ldovbb-override-mask = <0x400>;
1233 /* LDOVBBDSPEVE_FBB_VSET_OUT */
1234 ti,ldovbb-vset-mask = <0x1F>;
1235
1236 /*
1237 * NOTE: only FBB mode used but actual vset will
1238 * determine final biasing
1239 */
1240 ti,abb_info = <
1241 /*uV ABB efuse rbb_m fbb_m vset_m*/
1242 1055000 0 0x0 0 0x02000000 0x01F00000
1243 1150000 0 0x4 0 0x02000000 0x01F00000
1244 1250000 0 0x8 0 0x02000000 0x01F00000
1245 >;
1246 };
1247
1248 abb_gpu: regulator-abb-gpu {
1249 compatible = "ti,abb-v3";
1250 regulator-name = "abb_gpu";
1251 #address-cells = <0>;
1252 #size-cells = <0>;
1253 clocks = <&sys_clkin1>;
1254 ti,settling-time = <50>;
1255 ti,clock-cycles = <16>;
1256
1257 reg = <0x4ae07de4 0x4>, <0x4ae07de8 0x4>,
1258 <0x4ae06010 0x4>, <0x4a003b08 0xc>,
1259 <0x4ae0c154 0x4>;
1260 reg-names = "setup-address", "control-address",
1261 "int-address", "efuse-address",
1262 "ldo-address";
1263 ti,tranxdone-status-mask = <0x10000000>;
1264 /* LDOVBBGPU_FBB_MUX_CTRL */
1265 ti,ldovbb-override-mask = <0x400>;
1266 /* LDOVBBGPU_FBB_VSET_OUT */
1267 ti,ldovbb-vset-mask = <0x1F>;
1268
1269 /*
1270 * NOTE: only FBB mode used but actual vset will
1271 * determine final biasing
1272 */
1273 ti,abb_info = <
1274 /*uV ABB efuse rbb_m fbb_m vset_m*/
1275 1090000 0 0x0 0 0x02000000 0x01F00000
1276 1210000 0 0x4 0 0x02000000 0x01F00000
1277 1280000 0 0x8 0 0x02000000 0x01F00000
1278 >;
1279 };
1280
1281 mcspi1: spi@48098000 {
1282 compatible = "ti,omap4-mcspi";
1283 reg = <0x48098000 0x200>;
1284 interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
1285 #address-cells = <1>;
1286 #size-cells = <0>;
1287 ti,hwmods = "mcspi1";
1288 ti,spi-num-cs = <4>;
1289 dmas = <&sdma_xbar 35>,
1290 <&sdma_xbar 36>,
1291 <&sdma_xbar 37>,
1292 <&sdma_xbar 38>,
1293 <&sdma_xbar 39>,
1294 <&sdma_xbar 40>,
1295 <&sdma_xbar 41>,
1296 <&sdma_xbar 42>;
1297 dma-names = "tx0", "rx0", "tx1", "rx1",
1298 "tx2", "rx2", "tx3", "rx3";
1299 status = "disabled";
1300 };
1301
1302 mcspi2: spi@4809a000 {
1303 compatible = "ti,omap4-mcspi";
1304 reg = <0x4809a000 0x200>;
1305 interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
1306 #address-cells = <1>;
1307 #size-cells = <0>;
1308 ti,hwmods = "mcspi2";
1309 ti,spi-num-cs = <2>;
1310 dmas = <&sdma_xbar 43>,
1311 <&sdma_xbar 44>,
1312 <&sdma_xbar 45>,
1313 <&sdma_xbar 46>;
1314 dma-names = "tx0", "rx0", "tx1", "rx1";
1315 status = "disabled";
1316 };
1317
1318 mcspi3: spi@480b8000 {
1319 compatible = "ti,omap4-mcspi";
1320 reg = <0x480b8000 0x200>;
1321 interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
1322 #address-cells = <1>;
1323 #size-cells = <0>;
1324 ti,hwmods = "mcspi3";
1325 ti,spi-num-cs = <2>;
1326 dmas = <&sdma_xbar 15>, <&sdma_xbar 16>;
1327 dma-names = "tx0", "rx0";
1328 status = "disabled";
1329 };
1330
1331 mcspi4: spi@480ba000 {
1332 compatible = "ti,omap4-mcspi";
1333 reg = <0x480ba000 0x200>;
1334 interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
1335 #address-cells = <1>;
1336 #size-cells = <0>;
1337 ti,hwmods = "mcspi4";
1338 ti,spi-num-cs = <1>;
1339 dmas = <&sdma_xbar 70>, <&sdma_xbar 71>;
1340 dma-names = "tx0", "rx0";
1341 status = "disabled";
1342 };
1343
1344 qspi: qspi@4b300000 {
1345 compatible = "ti,dra7xxx-qspi";
1346 reg = <0x4b300000 0x100>,
1347 <0x5c000000 0x4000000>;
1348 reg-names = "qspi_base", "qspi_mmap";
1349 syscon-chipselects = <&scm_conf 0x558>;
1350 #address-cells = <1>;
1351 #size-cells = <0>;
1352 ti,hwmods = "qspi";
1353 clocks = <&qspi_gfclk_div>;
1354 clock-names = "fck";
1355 num-cs = <4>;
1356 interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
1357 status = "disabled";
1358 };
1359
1360 /* OCP2SCP3 */
1361 ocp2scp@4a090000 {
1362 compatible = "ti,omap-ocp2scp";
1363 #address-cells = <1>;
1364 #size-cells = <1>;
1365 ranges;
1366 reg = <0x4a090000 0x20>;
1367 ti,hwmods = "ocp2scp3";
1368 sata_phy: phy@4A096000 {
1369 compatible = "ti,phy-pipe3-sata";
1370 reg = <0x4A096000 0x80>, /* phy_rx */
1371 <0x4A096400 0x64>, /* phy_tx */
1372 <0x4A096800 0x40>; /* pll_ctrl */
1373 reg-names = "phy_rx", "phy_tx", "pll_ctrl";
1374 syscon-phy-power = <&scm_conf 0x374>;
1375 clocks = <&sys_clkin1>, <&sata_ref_clk>;
1376 clock-names = "sysclk", "refclk";
1377 syscon-pllreset = <&scm_conf 0x3fc>;
1378 #phy-cells = <0>;
1379 };
1380
1381 pcie1_phy: pciephy@4a094000 {
1382 compatible = "ti,phy-pipe3-pcie";
1383 reg = <0x4a094000 0x80>, /* phy_rx */
1384 <0x4a094400 0x64>; /* phy_tx */
1385 reg-names = "phy_rx", "phy_tx";
1386 syscon-phy-power = <&scm_conf_pcie 0x1c>;
1387 syscon-pcs = <&scm_conf_pcie 0x10>;
1388 clocks = <&dpll_pcie_ref_ck>,
1389 <&dpll_pcie_ref_m2ldo_ck>,
1390 <&optfclk_pciephy1_32khz>,
1391 <&optfclk_pciephy1_clk>,
1392 <&optfclk_pciephy1_div_clk>,
1393 <&optfclk_pciephy_div>,
1394 <&sys_clkin1>;
1395 clock-names = "dpll_ref", "dpll_ref_m2",
1396 "wkupclk", "refclk",
1397 "div-clk", "phy-div", "sysclk";
1398 #phy-cells = <0>;
1399 };
1400
1401 pcie2_phy: pciephy@4a095000 {
1402 compatible = "ti,phy-pipe3-pcie";
1403 reg = <0x4a095000 0x80>, /* phy_rx */
1404 <0x4a095400 0x64>; /* phy_tx */
1405 reg-names = "phy_rx", "phy_tx";
1406 syscon-phy-power = <&scm_conf_pcie 0x20>;
1407 syscon-pcs = <&scm_conf_pcie 0x10>;
1408 clocks = <&dpll_pcie_ref_ck>,
1409 <&dpll_pcie_ref_m2ldo_ck>,
1410 <&optfclk_pciephy2_32khz>,
1411 <&optfclk_pciephy2_clk>,
1412 <&optfclk_pciephy2_div_clk>,
1413 <&optfclk_pciephy_div>,
1414 <&sys_clkin1>;
1415 clock-names = "dpll_ref", "dpll_ref_m2",
1416 "wkupclk", "refclk",
1417 "div-clk", "phy-div", "sysclk";
1418 #phy-cells = <0>;
1419 status = "disabled";
1420 };
1421 };
1422
1423 sata: sata@4a141100 {
1424 compatible = "snps,dwc-ahci";
1425 reg = <0x4a140000 0x1100>, <0x4a141100 0x7>;
1426 interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
1427 phys = <&sata_phy>;
1428 phy-names = "sata-phy";
1429 clocks = <&sata_ref_clk>;
1430 ti,hwmods = "sata";
1431 ports-implemented = <0x1>;
1432 };
1433
1434 rtc: rtc@48838000 {
1435 compatible = "ti,am3352-rtc";
1436 reg = <0x48838000 0x100>;
1437 interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
1438 <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>;
1439 ti,hwmods = "rtcss";
1440 clocks = <&sys_32k_ck>;
1441 };
1442
1443 /* OCP2SCP1 */
1444 ocp2scp@4a080000 {
1445 compatible = "ti,omap-ocp2scp";
1446 #address-cells = <1>;
1447 #size-cells = <1>;
1448 ranges;
1449 reg = <0x4a080000 0x20>;
1450 ti,hwmods = "ocp2scp1";
1451
1452 usb2_phy1: phy@4a084000 {
1453 compatible = "ti,dra7x-usb2", "ti,omap-usb2";
1454 reg = <0x4a084000 0x400>;
1455 syscon-phy-power = <&scm_conf 0x300>;
1456 clocks = <&usb_phy1_always_on_clk32k>,
1457 <&usb_otg_ss1_refclk960m>;
1458 clock-names = "wkupclk",
1459 "refclk";
1460 #phy-cells = <0>;
1461 };
1462
1463 usb2_phy2: phy@4a085000 {
1464 compatible = "ti,dra7x-usb2-phy2",
1465 "ti,omap-usb2";
1466 reg = <0x4a085000 0x400>;
1467 syscon-phy-power = <&scm_conf 0xe74>;
1468 clocks = <&usb_phy2_always_on_clk32k>,
1469 <&usb_otg_ss2_refclk960m>;
1470 clock-names = "wkupclk",
1471 "refclk";
1472 #phy-cells = <0>;
1473 };
1474
1475 usb3_phy1: phy@4a084400 {
1476 compatible = "ti,omap-usb3";
1477 reg = <0x4a084400 0x80>,
1478 <0x4a084800 0x64>,
1479 <0x4a084c00 0x40>;
1480 reg-names = "phy_rx", "phy_tx", "pll_ctrl";
1481 syscon-phy-power = <&scm_conf 0x370>;
1482 clocks = <&usb_phy3_always_on_clk32k>,
1483 <&sys_clkin1>,
1484 <&usb_otg_ss1_refclk960m>;
1485 clock-names = "wkupclk",
1486 "sysclk",
1487 "refclk";
1488 #phy-cells = <0>;
1489 };
1490 };
1491
1492 omap_dwc3_1: omap_dwc3_1@48880000 {
1493 compatible = "ti,dwc3";
1494 ti,hwmods = "usb_otg_ss1";
1495 reg = <0x48880000 0x10000>;
1496 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
1497 #address-cells = <1>;
1498 #size-cells = <1>;
1499 utmi-mode = <2>;
1500 ranges;
1501 usb1: usb@48890000 {
1502 compatible = "snps,dwc3";
1503 reg = <0x48890000 0x17000>;
1504 interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
1505 <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
1506 <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
1507 interrupt-names = "peripheral",
1508 "host",
1509 "otg";
1510 phys = <&usb2_phy1>, <&usb3_phy1>;
1511 phy-names = "usb2-phy", "usb3-phy";
1512 maximum-speed = "super-speed";
1513 dr_mode = "otg";
1514 snps,dis_u3_susphy_quirk;
1515 snps,dis_u2_susphy_quirk;
1516 };
1517 };
1518
1519 omap_dwc3_2: omap_dwc3_2@488c0000 {
1520 compatible = "ti,dwc3";
1521 ti,hwmods = "usb_otg_ss2";
1522 reg = <0x488c0000 0x10000>;
1523 interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
1524 #address-cells = <1>;
1525 #size-cells = <1>;
1526 utmi-mode = <2>;
1527 ranges;
1528 usb2: usb@488d0000 {
1529 compatible = "snps,dwc3";
1530 reg = <0x488d0000 0x17000>;
1531 interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
1532 <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
1533 <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
1534 interrupt-names = "peripheral",
1535 "host",
1536 "otg";
1537 phys = <&usb2_phy2>;
1538 phy-names = "usb2-phy";
1539 maximum-speed = "high-speed";
1540 dr_mode = "otg";
1541 snps,dis_u3_susphy_quirk;
1542 snps,dis_u2_susphy_quirk;
1543 };
1544 };
1545
1546 /* IRQ for DWC3_3 and DWC3_4 need IRQ crossbar */
1547 omap_dwc3_3: omap_dwc3_3@48900000 {
1548 compatible = "ti,dwc3";
1549 ti,hwmods = "usb_otg_ss3";
1550 reg = <0x48900000 0x10000>;
1551 interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
1552 #address-cells = <1>;
1553 #size-cells = <1>;
1554 utmi-mode = <2>;
1555 ranges;
1556 status = "disabled";
1557 usb3: usb@48910000 {
1558 compatible = "snps,dwc3";
1559 reg = <0x48910000 0x17000>;
1560 interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
1561 <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
1562 <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
1563 interrupt-names = "peripheral",
1564 "host",
1565 "otg";
1566 maximum-speed = "high-speed";
1567 dr_mode = "otg";
1568 snps,dis_u3_susphy_quirk;
1569 snps,dis_u2_susphy_quirk;
1570 };
1571 };
1572
1573 elm: elm@48078000 {
1574 compatible = "ti,am3352-elm";
1575 reg = <0x48078000 0xfc0>; /* device IO registers */
1576 interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
1577 ti,hwmods = "elm";
1578 status = "disabled";
1579 };
1580
1581 gpmc: gpmc@50000000 {
1582 compatible = "ti,am3352-gpmc";
1583 ti,hwmods = "gpmc";
1584 reg = <0x50000000 0x37c>; /* device IO registers */
1585 interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
1586 dmas = <&edma_xbar 4 0>;
1587 dma-names = "rxtx";
1588 gpmc,num-cs = <8>;
1589 gpmc,num-waitpins = <2>;
1590 #address-cells = <2>;
1591 #size-cells = <1>;
1592 interrupt-controller;
1593 #interrupt-cells = <2>;
1594 gpio-controller;
1595 #gpio-cells = <2>;
1596 status = "disabled";
1597 };
1598
1599 atl: atl@4843c000 {
1600 compatible = "ti,dra7-atl";
1601 reg = <0x4843c000 0x3ff>;
1602 ti,hwmods = "atl";
1603 ti,provided-clocks = <&atl_clkin0_ck>, <&atl_clkin1_ck>,
1604 <&atl_clkin2_ck>, <&atl_clkin3_ck>;
1605 clocks = <&atl_gfclk_mux>;
1606 clock-names = "fck";
1607 status = "disabled";
1608 };
1609
1610 mcasp1: mcasp@48460000 {
1611 compatible = "ti,dra7-mcasp-audio";
1612 ti,hwmods = "mcasp1";
1613 reg = <0x48460000 0x2000>,
1614 <0x45800000 0x1000>;
1615 reg-names = "mpu","dat";
1616 interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
1617 <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
1618 interrupt-names = "tx", "rx";
1619 dmas = <&edma_xbar 129 1>, <&edma_xbar 128 1>;
1620 dma-names = "tx", "rx";
1621 clocks = <&mcasp1_aux_gfclk_mux>, <&mcasp1_ahclkx_mux>,
1622 <&mcasp1_ahclkr_mux>;
1623 clock-names = "fck", "ahclkx", "ahclkr";
1624 status = "disabled";
1625 };
1626
1627 mcasp2: mcasp@48464000 {
1628 compatible = "ti,dra7-mcasp-audio";
1629 ti,hwmods = "mcasp2";
1630 reg = <0x48464000 0x2000>,
1631 <0x45c00000 0x1000>;
1632 reg-names = "mpu","dat";
1633 interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
1634 <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
1635 interrupt-names = "tx", "rx";
1636 dmas = <&edma_xbar 131 1>, <&edma_xbar 130 1>;
1637 dma-names = "tx", "rx";
1638 clocks = <&mcasp2_aux_gfclk_mux>, <&mcasp2_ahclkx_mux>,
1639 <&mcasp2_ahclkr_mux>;
1640 clock-names = "fck", "ahclkx", "ahclkr";
1641 status = "disabled";
1642 };
1643
1644 mcasp3: mcasp@48468000 {
1645 compatible = "ti,dra7-mcasp-audio";
1646 ti,hwmods = "mcasp3";
1647 reg = <0x48468000 0x2000>,
1648 <0x46000000 0x1000>;
1649 reg-names = "mpu","dat";
1650 interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
1651 <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
1652 interrupt-names = "tx", "rx";
1653 dmas = <&edma_xbar 133 1>, <&edma_xbar 132 1>;
1654 dma-names = "tx", "rx";
1655 clocks = <&mcasp3_aux_gfclk_mux>, <&mcasp3_ahclkx_mux>;
1656 clock-names = "fck", "ahclkx";
1657 status = "disabled";
1658 };
1659
1660 mcasp4: mcasp@4846c000 {
1661 compatible = "ti,dra7-mcasp-audio";
1662 ti,hwmods = "mcasp4";
1663 reg = <0x4846c000 0x2000>,
1664 <0x48436000 0x1000>;
1665 reg-names = "mpu","dat";
1666 interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
1667 <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
1668 interrupt-names = "tx", "rx";
1669 dmas = <&edma_xbar 135 1>, <&edma_xbar 134 1>;
1670 dma-names = "tx", "rx";
1671 clocks = <&mcasp4_aux_gfclk_mux>, <&mcasp4_ahclkx_mux>;
1672 clock-names = "fck", "ahclkx";
1673 status = "disabled";
1674 };
1675
1676 mcasp5: mcasp@48470000 {
1677 compatible = "ti,dra7-mcasp-audio";
1678 ti,hwmods = "mcasp5";
1679 reg = <0x48470000 0x2000>,
1680 <0x4843a000 0x1000>;
1681 reg-names = "mpu","dat";
1682 interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
1683 <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
1684 interrupt-names = "tx", "rx";
1685 dmas = <&edma_xbar 137 1>, <&edma_xbar 136 1>;
1686 dma-names = "tx", "rx";
1687 clocks = <&mcasp5_aux_gfclk_mux>, <&mcasp5_ahclkx_mux>;
1688 clock-names = "fck", "ahclkx";
1689 status = "disabled";
1690 };
1691
1692 mcasp6: mcasp@48474000 {
1693 compatible = "ti,dra7-mcasp-audio";
1694 ti,hwmods = "mcasp6";
1695 reg = <0x48474000 0x2000>,
1696 <0x4844c000 0x1000>;
1697 reg-names = "mpu","dat";
1698 interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
1699 <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
1700 interrupt-names = "tx", "rx";
1701 dmas = <&edma_xbar 139 1>, <&edma_xbar 138 1>;
1702 dma-names = "tx", "rx";
1703 clocks = <&mcasp6_aux_gfclk_mux>, <&mcasp6_ahclkx_mux>;
1704 clock-names = "fck", "ahclkx";
1705 status = "disabled";
1706 };
1707
1708 mcasp7: mcasp@48478000 {
1709 compatible = "ti,dra7-mcasp-audio";
1710 ti,hwmods = "mcasp7";
1711 reg = <0x48478000 0x2000>,
1712 <0x48450000 0x1000>;
1713 reg-names = "mpu","dat";
1714 interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
1715 <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
1716 interrupt-names = "tx", "rx";
1717 dmas = <&edma_xbar 141 1>, <&edma_xbar 140 1>;
1718 dma-names = "tx", "rx";
1719 clocks = <&mcasp7_aux_gfclk_mux>, <&mcasp7_ahclkx_mux>;
1720 clock-names = "fck", "ahclkx";
1721 status = "disabled";
1722 };
1723
1724 mcasp8: mcasp@4847c000 {
1725 compatible = "ti,dra7-mcasp-audio";
1726 ti,hwmods = "mcasp8";
1727 reg = <0x4847c000 0x2000>,
1728 <0x48454000 0x1000>;
1729 reg-names = "mpu","dat";
1730 interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
1731 <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
1732 interrupt-names = "tx", "rx";
1733 dmas = <&edma_xbar 143 1>, <&edma_xbar 142 1>;
1734 dma-names = "tx", "rx";
1735 clocks = <&mcasp8_aux_gfclk_mux>, <&mcasp8_ahclkx_mux>;
1736 clock-names = "fck", "ahclkx";
1737 status = "disabled";
1738 };
1739
1740 crossbar_mpu: crossbar@4a002a48 {
1741 compatible = "ti,irq-crossbar";
1742 reg = <0x4a002a48 0x130>;
1743 interrupt-controller;
1744 interrupt-parent = <&wakeupgen>;
1745 #interrupt-cells = <3>;
1746 ti,max-irqs = <160>;
1747 ti,max-crossbar-sources = <MAX_SOURCES>;
1748 ti,reg-size = <2>;
1749 ti,irqs-reserved = <0 1 2 3 5 6 131 132>;
1750 ti,irqs-skip = <10 133 139 140>;
1751 ti,irqs-safe-map = <0>;
1752 };
1753
1754 mac: ethernet@48484000 {
1755 compatible = "ti,dra7-cpsw","ti,cpsw";
1756 ti,hwmods = "gmac";
1757 clocks = <&gmac_main_clk>, <&gmac_rft_clk_mux>;
1758 clock-names = "fck", "cpts";
1759 cpdma_channels = <8>;
1760 ale_entries = <1024>;
1761 bd_ram_size = <0x2000>;
1762 mac_control = <0x20>;
1763 slaves = <2>;
1764 active_slave = <0>;
1765 cpts_clock_mult = <0x784CFE14>;
1766 cpts_clock_shift = <29>;
1767 reg = <0x48484000 0x1000
1768 0x48485200 0x2E00>;
1769 #address-cells = <1>;
1770 #size-cells = <1>;
1771
1772 /*
1773 * Do not allow gating of cpsw clock as workaround
1774 * for errata i877. Keeping internal clock disabled
1775 * causes the device switching characteristics
1776 * to degrade over time and eventually fail to meet
1777 * the data manual delay time/skew specs.
1778 */
1779 ti,no-idle;
1780
1781 /*
1782 * rx_thresh_pend
1783 * rx_pend
1784 * tx_pend
1785 * misc_pend
1786 */
1787 interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
1788 <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
1789 <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
1790 <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
1791 ranges;
1792 syscon = <&scm_conf>;
1793 status = "disabled";
1794
1795 davinci_mdio: mdio@48485000 {
1796 compatible = "ti,cpsw-mdio","ti,davinci_mdio";
1797 #address-cells = <1>;
1798 #size-cells = <0>;
1799 ti,hwmods = "davinci_mdio";
1800 bus_freq = <1000000>;
1801 reg = <0x48485000 0x100>;
1802 };
1803
1804 cpsw_emac0: slave@48480200 {
1805 /* Filled in by U-Boot */
1806 mac-address = [ 00 00 00 00 00 00 ];
1807 };
1808
1809 cpsw_emac1: slave@48480300 {
1810 /* Filled in by U-Boot */
1811 mac-address = [ 00 00 00 00 00 00 ];
1812 };
1813
1814 phy_sel: cpsw-phy-sel@4a002554 {
1815 compatible = "ti,dra7xx-cpsw-phy-sel";
1816 reg= <0x4a002554 0x4>;
1817 reg-names = "gmii-sel";
1818 };
1819 };
1820
1821 dcan1: can@481cc000 {
1822 compatible = "ti,dra7-d_can";
1823 ti,hwmods = "dcan1";
1824 reg = <0x4ae3c000 0x2000>;
1825 syscon-raminit = <&scm_conf 0x558 0>;
1826 interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
1827 clocks = <&dcan1_sys_clk_mux>;
1828 status = "disabled";
1829 };
1830
1831 dcan2: can@481d0000 {
1832 compatible = "ti,dra7-d_can";
1833 ti,hwmods = "dcan2";
1834 reg = <0x48480000 0x2000>;
1835 syscon-raminit = <&scm_conf 0x558 1>;
1836 interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
1837 clocks = <&sys_clkin1>;
1838 status = "disabled";
1839 };
1840
1841 dss: dss@58000000 {
1842 compatible = "ti,dra7-dss";
1843 /* 'reg' defined in dra72x.dtsi and dra74x.dtsi */
1844 /* 'clocks' defined in dra72x.dtsi and dra74x.dtsi */
1845 status = "disabled";
1846 ti,hwmods = "dss_core";
1847 /* CTRL_CORE_DSS_PLL_CONTROL */
1848 syscon-pll-ctrl = <&scm_conf 0x538>;
1849 #address-cells = <1>;
1850 #size-cells = <1>;
1851 ranges;
1852
1853 dispc@58001000 {
1854 compatible = "ti,dra7-dispc";
1855 reg = <0x58001000 0x1000>;
1856 interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
1857 ti,hwmods = "dss_dispc";
1858 clocks = <&dss_dss_clk>;
1859 clock-names = "fck";
1860 /* CTRL_CORE_SMA_SW_1 */
1861 syscon-pol = <&scm_conf 0x534>;
1862 };
1863
1864 hdmi: encoder@58060000 {
1865 compatible = "ti,dra7-hdmi";
1866 reg = <0x58040000 0x200>,
1867 <0x58040200 0x80>,
1868 <0x58040300 0x80>,
1869 <0x58060000 0x19000>;
1870 reg-names = "wp", "pll", "phy", "core";
1871 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
1872 status = "disabled";
1873 ti,hwmods = "dss_hdmi";
1874 clocks = <&dss_48mhz_clk>, <&dss_hdmi_clk>;
1875 clock-names = "fck", "sys_clk";
1876 };
1877 };
1878
1879 epwmss0: epwmss@4843e000 {
1880 compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
1881 reg = <0x4843e000 0x30>;
1882 ti,hwmods = "epwmss0";
1883 #address-cells = <1>;
1884 #size-cells = <1>;
1885 status = "disabled";
1886 ranges;
1887
1888 ehrpwm0: pwm@4843e200 {
1889 compatible = "ti,dra746-ehrpwm",
1890 "ti,am3352-ehrpwm";
1891 #pwm-cells = <3>;
1892 reg = <0x4843e200 0x80>;
1893 clocks = <&ehrpwm0_tbclk>, <&l4_root_clk_div>;
1894 clock-names = "tbclk", "fck";
1895 status = "disabled";
1896 };
1897
1898 ecap0: ecap@4843e100 {
1899 compatible = "ti,dra746-ecap",
1900 "ti,am3352-ecap";
1901 #pwm-cells = <3>;
1902 reg = <0x4843e100 0x80>;
1903 clocks = <&l4_root_clk_div>;
1904 clock-names = "fck";
1905 status = "disabled";
1906 };
1907 };
1908
1909 epwmss1: epwmss@48440000 {
1910 compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
1911 reg = <0x48440000 0x30>;
1912 ti,hwmods = "epwmss1";
1913 #address-cells = <1>;
1914 #size-cells = <1>;
1915 status = "disabled";
1916 ranges;
1917
1918 ehrpwm1: pwm@48440200 {
1919 compatible = "ti,dra746-ehrpwm",
1920 "ti,am3352-ehrpwm";
1921 #pwm-cells = <3>;
1922 reg = <0x48440200 0x80>;
1923 clocks = <&ehrpwm1_tbclk>, <&l4_root_clk_div>;
1924 clock-names = "tbclk", "fck";
1925 status = "disabled";
1926 };
1927
1928 ecap1: ecap@48440100 {
1929 compatible = "ti,dra746-ecap",
1930 "ti,am3352-ecap";
1931 #pwm-cells = <3>;
1932 reg = <0x48440100 0x80>;
1933 clocks = <&l4_root_clk_div>;
1934 clock-names = "fck";
1935 status = "disabled";
1936 };
1937 };
1938
1939 epwmss2: epwmss@48442000 {
1940 compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
1941 reg = <0x48442000 0x30>;
1942 ti,hwmods = "epwmss2";
1943 #address-cells = <1>;
1944 #size-cells = <1>;
1945 status = "disabled";
1946 ranges;
1947
1948 ehrpwm2: pwm@48442200 {
1949 compatible = "ti,dra746-ehrpwm",
1950 "ti,am3352-ehrpwm";
1951 #pwm-cells = <3>;
1952 reg = <0x48442200 0x80>;
1953 clocks = <&ehrpwm2_tbclk>, <&l4_root_clk_div>;
1954 clock-names = "tbclk", "fck";
1955 status = "disabled";
1956 };
1957
1958 ecap2: ecap@48442100 {
1959 compatible = "ti,dra746-ecap",
1960 "ti,am3352-ecap";
1961 #pwm-cells = <3>;
1962 reg = <0x48442100 0x80>;
1963 clocks = <&l4_root_clk_div>;
1964 clock-names = "fck";
1965 status = "disabled";
1966 };
1967 };
1968
1969 aes1: aes@4b500000 {
1970 compatible = "ti,omap4-aes";
1971 ti,hwmods = "aes1";
1972 reg = <0x4b500000 0xa0>;
1973 interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
1974 dmas = <&edma_xbar 111 0>, <&edma_xbar 110 0>;
1975 dma-names = "tx", "rx";
1976 clocks = <&l3_iclk_div>;
1977 clock-names = "fck";
1978 };
1979
1980 aes2: aes@4b700000 {
1981 compatible = "ti,omap4-aes";
1982 ti,hwmods = "aes2";
1983 reg = <0x4b700000 0xa0>;
1984 interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
1985 dmas = <&edma_xbar 114 0>, <&edma_xbar 113 0>;
1986 dma-names = "tx", "rx";
1987 clocks = <&l3_iclk_div>;
1988 clock-names = "fck";
1989 };
1990
1991 des: des@480a5000 {
1992 compatible = "ti,omap4-des";
1993 ti,hwmods = "des";
1994 reg = <0x480a5000 0xa0>;
1995 interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
1996 dmas = <&sdma_xbar 117>, <&sdma_xbar 116>;
1997 dma-names = "tx", "rx";
1998 clocks = <&l3_iclk_div>;
1999 clock-names = "fck";
2000 };
2001
2002 sham: sham@53100000 {
2003 compatible = "ti,omap5-sham";
2004 ti,hwmods = "sham";
2005 reg = <0x4b101000 0x300>;
2006 interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
2007 dmas = <&edma_xbar 119 0>;
2008 dma-names = "rx";
2009 clocks = <&l3_iclk_div>;
2010 clock-names = "fck";
2011 };
2012
2013 rng: rng@48090000 {
2014 compatible = "ti,omap4-rng";
2015 ti,hwmods = "rng";
2016 reg = <0x48090000 0x2000>;
2017 interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
2018 clocks = <&l3_iclk_div>;
2019 clock-names = "fck";
2020 };
2021 };
2022
2023 thermal_zones: thermal-zones {
2024 #include "omap4-cpu-thermal.dtsi"
2025 #include "omap5-gpu-thermal.dtsi"
2026 #include "omap5-core-thermal.dtsi"
2027 #include "dra7-dspeve-thermal.dtsi"
2028 #include "dra7-iva-thermal.dtsi"
2029 };
2030
2031 };
2032
2033 &cpu_thermal {
2034 polling-delay = <500>; /* milliseconds */
2035 coefficients = <0 2000>;
2036 };
2037
2038 &gpu_thermal {
2039 coefficients = <0 2000>;
2040 };
2041
2042 &core_thermal {
2043 coefficients = <0 2000>;
2044 };
2045
2046 &dspeve_thermal {
2047 coefficients = <0 2000>;
2048 };
2049
2050 &iva_thermal {
2051 coefficients = <0 2000>;
2052 };
2053
2054 &cpu_crit {
2055 temperature = <120000>; /* milli Celsius */
2056 };
2057
2058 /include/ "dra7xx-clocks.dtsi"
"Das U-Boot" Source Tree