configs/pm9263_defconfig

   1 CONFIG_ARM=y
   2 CONFIG_ARCH_AT91=y
   3 CONFIG_SYS_TEXT_BASE=0
   4 CONFIG_TARGET_PM9263=y
   5 CONFIG_SYS_MALLOC_F_LEN=0x2000
   6 CONFIG_DEFAULT_DEVICE_TREE="at91sam9263ek"
   7 CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263"
   8 CONFIG_BOOTDELAY=3
   9 CONFIG_USE_BOOTARGS=y
  10 CONFIG_BOOTARGS="root=/dev/mtdblock4 rootfstype=jffs2 fbcon=rotate:3 "
  11 # CONFIG_CONSOLE_MUX is not set
  12 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
  13 CONFIG_BOARD_EARLY_INIT_F=y
  14 # CONFIG_AUTO_COMPLETE is not set
  15 CONFIG_SYS_PROMPT="u-boot-pm9263> "
  16 # CONFIG_CMD_BDI is not set
  17 # CONFIG_CMD_IMI is not set
  18 # CONFIG_CMD_LOADS is not set
  19 CONFIG_CMD_NAND=y
  20 CONFIG_CMD_SF=y
  21 CONFIG_CMD_USB=y
  22 # CONFIG_CMD_SETEXPR is not set
  23 CONFIG_CMD_DHCP=y
  24 CONFIG_CMD_PING=y
  25 CONFIG_CMD_CACHE=y
  26 CONFIG_CMD_JFFS2=y
  27 CONFIG_MTDIDS_DEFAULT="nor0=physmap-flash.0,nand0=nand"
  28 CONFIG_MTDPARTS_DEFAULT="mtdparts=physmap-flash.0:256k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),-(rootfs);nand:-(nand)"
  29 CONFIG_OF_CONTROL=y
  30 CONFIG_ENV_IS_IN_FLASH=y
  31 CONFIG_BOOTP_BOOTPATH=y
  32 CONFIG_BOOTP_GATEWAY=y
  33 CONFIG_BOOTP_HOSTNAME=y
  34 CONFIG_DM=y
  35 CONFIG_CLK=y
  36 CONFIG_CLK_AT91=y
  37 CONFIG_DM_GPIO=y
  38 CONFIG_AT91_GPIO=y
  39 # CONFIG_MMC is not set
  40 CONFIG_MTD_NOR_FLASH=y
  41 CONFIG_DM_SPI_FLASH=y
  42 CONFIG_SPI_FLASH=y
  43 CONFIG_SPI_FLASH_ATMEL=y
  44 CONFIG_SPI_FLASH_DATAFLASH=y
  45 CONFIG_DM_SERIAL=y
  46 CONFIG_ATMEL_USART=y
  47 CONFIG_DM_SPI=y
  48 CONFIG_ATMEL_SPI=y
  49 CONFIG_USB=y
  50 CONFIG_USB_STORAGE=y
  51 CONFIG_LCD=y