drivers/usb/host/ehci.h

   1 /*-
   2  * Copyright (c) 2007-2008, Juniper Networks, Inc.
   3  * Copyright (c) 2008, Michael Trimarchi <trimarchimichael@yahoo.it>
   4  * All rights reserved.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0
   7  */
   8
   9 #ifndef USB_EHCI_H
  10 #define USB_EHCI_H
  11
  12 #include <usb.h>
  13
  14 #if !defined(CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS)
  15 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS      2
  16 #endif
  17
  18 /*
  19  * Register Space.
  20  */
  21 struct ehci_hccr {
  22         uint32_t cr_capbase;
  23 #define HC_LENGTH(p)            (((p) >> 0) & 0x00ff)
  24 #define HC_VERSION(p)           (((p) >> 16) & 0xffff)
  25         uint32_t cr_hcsparams;
  26 #define HCS_PPC(p)              ((p) & (1 << 4))
  27 #define HCS_INDICATOR(p)        ((p) & (1 << 16)) /* Port indicators */
  28 #define HCS_N_PORTS(p)          (((p) >> 0) & 0xf)
  29         uint32_t cr_hccparams;
  30         uint8_t cr_hcsp_portrt[8];
  31 } __attribute__ ((packed, aligned(4)));
  32
  33 struct ehci_hcor {
  34         uint32_t or_usbcmd;
  35 #define CMD_PARK        (1 << 11)               /* enable "park" */
  36 #define CMD_PARK_CNT(c) (((c) >> 8) & 3)        /* how many transfers to park */
  37 #define CMD_LRESET      (1 << 7)                /* partial reset */
  38 #define CMD_IAAD        (1 << 6)                /* "doorbell" interrupt */
  39 #define CMD_ASE         (1 << 5)                /* async schedule enable */
  40 #define CMD_PSE         (1 << 4)                /* periodic schedule enable */
  41 #define CMD_RESET       (1 << 1)                /* reset HC not bus */
  42 #define CMD_RUN         (1 << 0)                /* start/stop HC */
  43         uint32_t or_usbsts;
  44 #define STS_ASS         (1 << 15)
  45 #define STS_PSS         (1 << 14)
  46 #define STS_HALT        (1 << 12)
  47         uint32_t or_usbintr;
  48 #define INTR_UE         (1 << 0)                /* USB interrupt enable */
  49 #define INTR_UEE        (1 << 1)                /* USB error interrupt enable */
  50 #define INTR_PCE        (1 << 2)                /* Port change detect enable */
  51 #define INTR_SEE        (1 << 4)                /* system error enable */
  52 #define INTR_AAE        (1 << 5)                /* Interrupt on async adavance enable */
  53         uint32_t or_frindex;
  54         uint32_t or_ctrldssegment;
  55         uint32_t or_periodiclistbase;
  56         uint32_t or_asynclistaddr;
  57         uint32_t _reserved_0_;
  58         uint32_t or_burstsize;
  59         uint32_t or_txfilltuning;
  60 #define TXFIFO_THRESH_MASK              (0x3f << 16)
  61 #define TXFIFO_THRESH(p)                ((p & 0x3f) << 16)
  62         uint32_t _reserved_1_[6];
  63         uint32_t or_configflag;
  64 #define FLAG_CF         (1 << 0)        /* true:  we'll support "high speed" */
  65         uint32_t or_portsc[CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS];
  66 #define PORTSC_PSPD(x)          (((x) >> 26) & 0x3)
  67 #define PORTSC_PSPD_FS                  0x0
  68 #define PORTSC_PSPD_LS                  0x1
  69 #define PORTSC_PSPD_HS                  0x2
  70         uint32_t or_systune;
  71 } __attribute__ ((packed, aligned(4)));
  72
  73 #define USBMODE         0x68            /* USB Device mode */
  74 #define USBMODE_SDIS    (1 << 3)        /* Stream disable */
  75 #define USBMODE_BE      (1 << 2)        /* BE/LE endiannes select */
  76 #define USBMODE_CM_HC   (3 << 0)        /* host controller mode */
  77 #define USBMODE_CM_IDLE (0 << 0)        /* idle state */
  78
  79 /* Interface descriptor */
  80 struct usb_linux_interface_descriptor {
  81         unsigned char   bLength;
  82         unsigned char   bDescriptorType;
  83         unsigned char   bInterfaceNumber;
  84         unsigned char   bAlternateSetting;
  85         unsigned char   bNumEndpoints;
  86         unsigned char   bInterfaceClass;
  87         unsigned char   bInterfaceSubClass;
  88         unsigned char   bInterfaceProtocol;
  89         unsigned char   iInterface;
  90 } __attribute__ ((packed));
  91
  92 /* Configuration descriptor information.. */
  93 struct usb_linux_config_descriptor {
  94         unsigned char   bLength;
  95         unsigned char   bDescriptorType;
  96         unsigned short  wTotalLength;
  97         unsigned char   bNumInterfaces;
  98         unsigned char   bConfigurationValue;
  99         unsigned char   iConfiguration;
 100         unsigned char   bmAttributes;
 101         unsigned char   MaxPower;
 102 } __attribute__ ((packed));
 103
 104 #if defined CONFIG_EHCI_DESC_BIG_ENDIAN
 105 #define ehci_readl(x)           cpu_to_be32((*((volatile u32 *)(x))))
 106 #define ehci_writel(a, b)       (*((volatile u32 *)(a)) = \
 107                                         cpu_to_be32(((volatile u32)b)))
 108 #else
 109 #define ehci_readl(x)           cpu_to_le32((*((volatile u32 *)(x))))
 110 #define ehci_writel(a, b)       (*((volatile u32 *)(a)) = \
 111                                         cpu_to_le32(((volatile u32)b)))
 112 #endif
 113
 114 #if defined CONFIG_EHCI_MMIO_BIG_ENDIAN
 115 #define hc32_to_cpu(x)          be32_to_cpu((x))
 116 #define cpu_to_hc32(x)          cpu_to_be32((x))
 117 #else
 118 #define hc32_to_cpu(x)          le32_to_cpu((x))
 119 #define cpu_to_hc32(x)          cpu_to_le32((x))
 120 #endif
 121
 122 #define EHCI_PS_WKOC_E          (1 << 22)       /* RW wake on over current */
 123 #define EHCI_PS_WKDSCNNT_E      (1 << 21)       /* RW wake on disconnect */
 124 #define EHCI_PS_WKCNNT_E        (1 << 20)       /* RW wake on connect */
 125 #define EHCI_PS_PO              (1 << 13)       /* RW port owner */
 126 #define EHCI_PS_PP              (1 << 12)       /* RW,RO port power */
 127 #define EHCI_PS_LS              (3 << 10)       /* RO line status */
 128 #define EHCI_PS_PR              (1 << 8)        /* RW port reset */
 129 #define EHCI_PS_SUSP            (1 << 7)        /* RW suspend */
 130 #define EHCI_PS_FPR             (1 << 6)        /* RW force port resume */
 131 #define EHCI_PS_OCC             (1 << 5)        /* RWC over current change */
 132 #define EHCI_PS_OCA             (1 << 4)        /* RO over current active */
 133 #define EHCI_PS_PEC             (1 << 3)        /* RWC port enable change */
 134 #define EHCI_PS_PE              (1 << 2)        /* RW port enable */
 135 #define EHCI_PS_CSC             (1 << 1)        /* RWC connect status change */
 136 #define EHCI_PS_CS              (1 << 0)        /* RO connect status */
 137 #define EHCI_PS_CLEAR           (EHCI_PS_OCC | EHCI_PS_PEC | EHCI_PS_CSC)
 138
 139 #define EHCI_PS_IS_LOWSPEED(x)  (((x) & EHCI_PS_LS) == (1 << 10))
 140
 141 /*
 142  * Schedule Interface Space.
 143  *
 144  * IMPORTANT: Software must ensure that no interface data structure
 145  * reachable by the EHCI host controller spans a 4K page boundary!
 146  *
 147  * Periodic transfers (i.e. isochronous and interrupt transfers) are
 148  * not supported.
 149  */
 150
 151 /* Queue Element Transfer Descriptor (qTD). */
 152 struct qTD {
 153         /* this part defined by EHCI spec */
 154         uint32_t qt_next;                       /* see EHCI 3.5.1 */
 155 #define QT_NEXT_TERMINATE       1
 156         uint32_t qt_altnext;                    /* see EHCI 3.5.2 */
 157         uint32_t qt_token;                      /* see EHCI 3.5.3 */
 158 #define QT_TOKEN_DT(x)          (((x) & 0x1) << 31)     /* Data Toggle */
 159 #define QT_TOKEN_GET_DT(x)              (((x) >> 31) & 0x1)
 160 #define QT_TOKEN_TOTALBYTES(x)  (((x) & 0x7fff) << 16)  /* Total Bytes to Transfer */
 161 #define QT_TOKEN_GET_TOTALBYTES(x)      (((x) >> 16) & 0x7fff)
 162 #define QT_TOKEN_IOC(x)         (((x) & 0x1) << 15)     /* Interrupt On Complete */
 163 #define QT_TOKEN_CPAGE(x)       (((x) & 0x7) << 12)     /* Current Page */
 164 #define QT_TOKEN_CERR(x)        (((x) & 0x3) << 10)     /* Error Counter */
 165 #define QT_TOKEN_PID(x)         (((x) & 0x3) << 8)      /* PID Code */
 166 #define QT_TOKEN_PID_OUT                0x0
 167 #define QT_TOKEN_PID_IN                 0x1
 168 #define QT_TOKEN_PID_SETUP              0x2
 169 #define QT_TOKEN_STATUS(x)      (((x) & 0xff) << 0)     /* Status */
 170 #define QT_TOKEN_GET_STATUS(x)          (((x) >> 0) & 0xff)
 171 #define QT_TOKEN_STATUS_ACTIVE          0x80
 172 #define QT_TOKEN_STATUS_HALTED          0x40
 173 #define QT_TOKEN_STATUS_DATBUFERR       0x20
 174 #define QT_TOKEN_STATUS_BABBLEDET       0x10
 175 #define QT_TOKEN_STATUS_XACTERR         0x08
 176 #define QT_TOKEN_STATUS_MISSEDUFRAME    0x04
 177 #define QT_TOKEN_STATUS_SPLITXSTATE     0x02
 178 #define QT_TOKEN_STATUS_PERR            0x01
 179 #define QT_BUFFER_CNT           5
 180         uint32_t qt_buffer[QT_BUFFER_CNT];      /* see EHCI 3.5.4 */
 181         uint32_t qt_buffer_hi[QT_BUFFER_CNT];   /* Appendix B */
 182         /* pad struct for 32 byte alignment */
 183         uint32_t unused[3];
 184 };
 185
 186 #define EHCI_PAGE_SIZE          4096
 187
 188 /* Queue Head (QH). */
 189 struct QH {
 190         uint32_t qh_link;
 191 #define QH_LINK_TERMINATE       1
 192 #define QH_LINK_TYPE_ITD        0
 193 #define QH_LINK_TYPE_QH         2
 194 #define QH_LINK_TYPE_SITD       4
 195 #define QH_LINK_TYPE_FSTN       6
 196         uint32_t qh_endpt1;
 197 #define QH_ENDPT1_RL(x)         (((x) & 0xf) << 28)     /* NAK Count Reload */
 198 #define QH_ENDPT1_C(x)          (((x) & 0x1) << 27)     /* Control Endpoint Flag */
 199 #define QH_ENDPT1_MAXPKTLEN(x)  (((x) & 0x7ff) << 16)   /* Maximum Packet Length */
 200 #define QH_ENDPT1_H(x)          (((x) & 0x1) << 15)     /* Head of Reclamation List Flag */
 201 #define QH_ENDPT1_DTC(x)        (((x) & 0x1) << 14)     /* Data Toggle Control */
 202 #define QH_ENDPT1_DTC_IGNORE_QTD_TD     0x0
 203 #define QH_ENDPT1_DTC_DT_FROM_QTD       0x1
 204 #define QH_ENDPT1_EPS(x)        (((x) & 0x3) << 12)     /* Endpoint Speed */
 205 #define QH_ENDPT1_EPS_FS                0x0
 206 #define QH_ENDPT1_EPS_LS                0x1
 207 #define QH_ENDPT1_EPS_HS                0x2
 208 #define QH_ENDPT1_ENDPT(x)      (((x) & 0xf) << 8)      /* Endpoint Number */
 209 #define QH_ENDPT1_I(x)          (((x) & 0x1) << 7)      /* Inactivate on Next Transaction */
 210 #define QH_ENDPT1_DEVADDR(x)    (((x) & 0x7f) << 0)     /* Device Address */
 211         uint32_t qh_endpt2;
 212 #define QH_ENDPT2_MULT(x)       (((x) & 0x3) << 30)     /* High-Bandwidth Pipe Multiplier */
 213 #define QH_ENDPT2_PORTNUM(x)    (((x) & 0x7f) << 23)    /* Port Number */
 214 #define QH_ENDPT2_HUBADDR(x)    (((x) & 0x7f) << 16)    /* Hub Address */
 215 #define QH_ENDPT2_UFCMASK(x)    (((x) & 0xff) << 8)     /* Split Completion Mask */
 216 #define QH_ENDPT2_UFSMASK(x)    (((x) & 0xff) << 0)     /* Interrupt Schedule Mask */
 217         uint32_t qh_curtd;
 218         struct qTD qh_overlay;
 219         /*
 220          * Add dummy fill value to make the size of this struct
 221          * aligned to 32 bytes
 222          */
 223         union {
 224                 uint32_t fill[4];
 225                 void *buffer;
 226         };
 227 };
 228
 229 /* Tweak flags for EHCI, used to control operation */
 230 enum {
 231         /* don't use or_configflag in init */
 232         EHCI_TWEAK_NO_INIT_CF           = 1 << 0,
 233 };
 234
 235 struct ehci_ctrl;
 236
 237 struct ehci_ops {
 238         void (*set_usb_mode)(struct ehci_ctrl *ctrl);
 239         int (*get_port_speed)(struct ehci_ctrl *ctrl, uint32_t reg);
 240         void (*powerup_fixup)(struct ehci_ctrl *ctrl, uint32_t *status_reg,
 241                               uint32_t *reg);
 242         uint32_t *(*get_portsc_register)(struct ehci_ctrl *ctrl, int port);
 243         int (*init_after_reset)(struct ehci_ctrl *ctrl);
 244 };
 245
 246 struct ehci_ctrl {
 247         enum usb_init_type init;
 248         struct ehci_hccr *hccr; /* R/O registers, not need for volatile */
 249         struct ehci_hcor *hcor;
 250         int rootdev;
 251         uint16_t portreset;
 252         struct QH qh_list __aligned(USB_DMA_MINALIGN);
 253         struct QH periodic_queue __aligned(USB_DMA_MINALIGN);
 254         uint32_t *periodic_list;
 255         int periodic_schedules;
 256         int ntds;
 257         struct ehci_ops ops;
 258         void *priv;     /* client's private data */
 259 };
 260
 261 /**
 262  * ehci_set_controller_info() - Set up private data for the controller
 263  *
 264  * This function can be called in ehci_hcd_init() to tell the EHCI layer
 265  * about the controller's private data pointer. Then in the above functions
 266  * this can be accessed given the struct ehci_ctrl pointer. Also special
 267  * EHCI operation methods can be provided if required
 268  *
 269  * @index:      Controller number to set
 270  * @priv:       Controller pointer
 271  * @ops:        Controller operations, or NULL to use default
 272  */
 273 void ehci_set_controller_priv(int index, void *priv,
 274                               const struct ehci_ops *ops);
 275
 276 /**
 277  * ehci_get_controller_priv() - Get controller private data
 278  *
 279  * @index       Controller number to get
 280  * @return controller pointer for this index
 281  */
 282 void *ehci_get_controller_priv(int index);
 283
 284 /* Low level init functions */
 285 int ehci_hcd_init(int index, enum usb_init_type init,
 286                 struct ehci_hccr **hccr, struct ehci_hcor **hcor);
 287 int ehci_hcd_stop(int index);
 288
 289 int ehci_register(struct udevice *dev, struct ehci_hccr *hccr,
 290                   struct ehci_hcor *hcor, const struct ehci_ops *ops,
 291                   uint tweaks, enum usb_init_type init);
 292 int ehci_deregister(struct udevice *dev);
 293 extern struct dm_usb_ops ehci_usb_ops;
 294
 295 #endif /* USB_EHCI_H */