include/configs/M5275EVB.h

   1 /*
   2  * Configuation settings for the Motorola MC5275EVB board.
   3  *
   4  * By Arthur Shipkowski <art@videon-central.com>
   5  * Copyright (C) 2005 Videon Central, Inc.
   6  *
   7  * Based off of M5272C3 board code by Josef Baumgartner
   8  * <josef.baumgartner@telex.de>
   9  *
  10  * SPDX-License-Identifier:     GPL-2.0+
  11  */
  12
  13 /*
  14  * board/config.h - configuration options, board specific
  15  */
  16
  17 #ifndef _M5275EVB_H
  18 #define _M5275EVB_H
  19
  20 /*
  21  * High Level Configuration Options
  22  * (easy to change)
  23  */
  24
  25 #define CONFIG_MCFTMR
  26
  27 #define CONFIG_MCFUART
  28 #define CONFIG_SYS_UART_PORT            (0)
  29
  30 /* Configuration for environment
  31  * Environment is embedded in u-boot in the second sector of the flash
  32  */
  33 #ifndef CONFIG_MONITOR_IS_IN_RAM
  34 #define CONFIG_ENV_OFFSET               0x4000
  35 #define CONFIG_ENV_SECT_SIZE    0x2000
  36 #else
  37 #define CONFIG_ENV_ADDR         0xffe04000
  38 #define CONFIG_ENV_SECT_SIZE    0x2000
  39 #endif
  40
  41 #define LDS_BOARD_TEXT \
  42         . = DEFINED(env_offset) ? env_offset : .; \
  43         env/embedded.o(.text);
  44
  45 /*
  46  * BOOTP options
  47  */
  48 #define CONFIG_BOOTP_BOOTFILESIZE
  49
  50 /* Available command configuration */
  51
  52 #define CONFIG_MCFFEC
  53 #ifdef CONFIG_MCFFEC
  54 #define CONFIG_MII              1
  55 #define CONFIG_MII_INIT         1
  56 #define CONFIG_SYS_DISCOVER_PHY
  57 #define CONFIG_SYS_RX_ETH_BUFFER        8
  58 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  59 #define CONFIG_SYS_FEC0_PINMUX          0
  60 #define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE
  61 #define CONFIG_SYS_FEC1_PINMUX          0
  62 #define CONFIG_SYS_FEC1_MIIBASE CONFIG_SYS_FEC1_IOBASE
  63 #define MCFFEC_TOUT_LOOP        50000
  64 #define CONFIG_HAS_ETH1
  65 /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
  66 #ifndef CONFIG_SYS_DISCOVER_PHY
  67 #define FECDUPLEX               FULL
  68 #define FECSPEED                _100BASET
  69 #else
  70 #ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  71 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  72 #endif
  73 #endif
  74 #endif
  75
  76 /* I2C */
  77 #define CONFIG_SYS_I2C
  78 #define CONFIG_SYS_I2C_FSL
  79 #define CONFIG_SYS_FSL_I2C_SPEED        80000
  80 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
  81 #define CONFIG_SYS_FSL_I2C_OFFSET       0x00000300
  82 #define CONFIG_SYS_IMMR         CONFIG_SYS_MBAR
  83 #define CONFIG_SYS_I2C_PINMUX_REG       (gpio_reg->par_feci2c)
  84 #define CONFIG_SYS_I2C_PINMUX_CLR       (0xFFF0)
  85 #define CONFIG_SYS_I2C_PINMUX_SET       (0x000F)
  86
  87 #define CONFIG_SYS_LOAD_ADDR            0x800000
  88
  89 #define CONFIG_BOOTCOMMAND      "bootm ffe40000"
  90 #define CONFIG_SYS_MEMTEST_START        0x400
  91 #define CONFIG_SYS_MEMTEST_END          0x380000
  92
  93 #ifdef CONFIG_MCFFEC
  94 #       define CONFIG_NET_RETRY_COUNT   5
  95 #       define CONFIG_OVERWRITE_ETHADDR_ONCE
  96 #endif                          /* FEC_ENET */
  97
  98 #define CONFIG_EXTRA_ENV_SETTINGS               \
  99         "netdev=eth0\0"                         \
 100         "loadaddr=10000\0"                      \
 101         "uboot=u-boot.bin\0"                    \
 102         "load=tftp ${loadaddr} ${uboot}\0"      \
 103         "upd=run load; run prog\0"              \
 104         "prog=prot off ffe00000 ffe3ffff;"      \
 105         "era ffe00000 ffe3ffff;"                \
 106         "cp.b ${loadaddr} ffe00000 ${filesize};"\
 107         "save\0"                                \
 108         ""
 109
 110 #define CONFIG_SYS_CLK                  150000000
 111
 112 /*
 113  * Low Level Configuration Settings
 114  * (address mappings, register initial values, etc.)
 115  * You should know what you are doing if you make changes here.
 116  */
 117
 118 #define CONFIG_SYS_MBAR         0x40000000
 119
 120 /*-----------------------------------------------------------------------
 121  * Definitions for initial stack pointer and data area (in DPRAM)
 122  */
 123 #define CONFIG_SYS_INIT_RAM_ADDR        0x20000000
 124 #define CONFIG_SYS_INIT_RAM_SIZE        0x10000 /* Size of used area in internal SRAM */
 125 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 126 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 127
 128 /*-----------------------------------------------------------------------
 129  * Start addresses for the final memory configuration
 130  * (Set up by the startup code)
 131  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 132  */
 133 #define CONFIG_SYS_SDRAM_BASE           0x00000000
 134 #define CONFIG_SYS_SDRAM_SIZE           16      /* SDRAM size in MB */
 135 #define CONFIG_SYS_FLASH_BASE           CONFIG_SYS_CS0_BASE
 136
 137 #ifdef CONFIG_MONITOR_IS_IN_RAM
 138 #define CONFIG_SYS_MONITOR_BASE 0x20000
 139 #else
 140 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
 141 #endif
 142
 143 #define CONFIG_SYS_MONITOR_LEN          0x20000
 144 #define CONFIG_SYS_MALLOC_LEN           (256 << 10)
 145 #define CONFIG_SYS_BOOTPARAMS_LEN       64*1024
 146
 147 /*
 148  * For booting Linux, the board info and command line data
 149  * have to be in the first 8 MB of memory, since this is
 150  * the maximum mapped by the Linux kernel during initialization ??
 151  */
 152 #define CONFIG_SYS_BOOTMAPSZ            (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
 153 #define CONFIG_SYS_BOOTM_LEN            (CONFIG_SYS_SDRAM_SIZE << 20)
 154
 155 /*-----------------------------------------------------------------------
 156  * FLASH organization
 157  */
 158 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* max number of memory banks */
 159 #define CONFIG_SYS_MAX_FLASH_SECT       11      /* max number of sectors on one chip */
 160 #define CONFIG_SYS_FLASH_ERASE_TOUT     1000
 161
 162 #define CONFIG_SYS_FLASH_CFI            1
 163 #define CONFIG_FLASH_CFI_DRIVER 1
 164 #define CONFIG_SYS_FLASH_SIZE           0x200000
 165
 166 /*-----------------------------------------------------------------------
 167  * Cache Configuration
 168  */
 169 #define CONFIG_SYS_CACHELINE_SIZE       16
 170
 171 #define ICACHE_STATUS                   (CONFIG_SYS_INIT_RAM_ADDR + \
 172                                          CONFIG_SYS_INIT_RAM_SIZE - 8)
 173 #define DCACHE_STATUS                   (CONFIG_SYS_INIT_RAM_ADDR + \
 174                                          CONFIG_SYS_INIT_RAM_SIZE - 4)
 175 #define CONFIG_SYS_ICACHE_INV           (CF_CACR_CINV | CF_CACR_INVI)
 176 #define CONFIG_SYS_CACHE_ACR0           (CONFIG_SYS_SDRAM_BASE | \
 177                                          CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
 178                                          CF_ACR_EN | CF_ACR_SM_ALL)
 179 #define CONFIG_SYS_CACHE_ICACR          (CF_CACR_CENB | CF_CACR_CINV | \
 180                                          CF_CACR_DISD | CF_CACR_INVI | \
 181                                          CF_CACR_CEIB | CF_CACR_DCM | \
 182                                          CF_CACR_EUSP)
 183
 184 /*-----------------------------------------------------------------------
 185  * Memory bank definitions
 186  */
 187 #define CONFIG_SYS_CS0_BASE             0xffe00000
 188 #define CONFIG_SYS_CS0_CTRL             0x00001980
 189 #define CONFIG_SYS_CS0_MASK             0x001F0001
 190
 191 #define CONFIG_SYS_CS1_BASE             0x30000000
 192 #define CONFIG_SYS_CS1_CTRL             0x00001900
 193 #define CONFIG_SYS_CS1_MASK             0x00070001
 194
 195 /*-----------------------------------------------------------------------
 196  * Port configuration
 197  */
 198 #define CONFIG_SYS_FECI2C               0x0FA0
 199
 200 #endif  /* _M5275EVB_H */