include/configs/M53017EVB.h

   1 /*
   2  * Configuation settings for the Freescale MCF53017EVB.
   3  *
   4  * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
   5  * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 /*
  11  * board/config.h - configuration options, board specific
  12  */
  13
  14 #ifndef _M53017EVB_H
  15 #define _M53017EVB_H
  16
  17 /*
  18  * High Level Configuration Options
  19  * (easy to change)
  20  */
  21
  22 #define CONFIG_MCFUART
  23 #define CONFIG_SYS_UART_PORT            (0)
  24
  25 #undef CONFIG_WATCHDOG
  26 #define CONFIG_WATCHDOG_TIMEOUT         5000
  27
  28 #define CONFIG_SYS_UNIFY_CACHE
  29
  30 #define CONFIG_MCFFEC
  31 #ifdef CONFIG_MCFFEC
  32 #       define CONFIG_MII               1
  33 #       define CONFIG_MII_INIT          1
  34 #       define CONFIG_SYS_DISCOVER_PHY
  35 #       define CONFIG_SYS_RX_ETH_BUFFER 8
  36 #       define CONFIG_SYS_TX_ETH_BUFFER 8
  37 #       define CONFIG_SYS_FEC_BUF_USE_SRAM
  38 #       define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  39 #       define CONFIG_HAS_ETH1
  40
  41 #       define CONFIG_SYS_FEC0_PINMUX   0
  42 #       define CONFIG_SYS_FEC0_MIIBASE  CONFIG_SYS_FEC0_IOBASE
  43 #       define CONFIG_SYS_FEC1_PINMUX   0
  44 #       define CONFIG_SYS_FEC1_MIIBASE  CONFIG_SYS_FEC1_IOBASE
  45 #       define MCFFEC_TOUT_LOOP         50000
  46
  47 /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
  48 #       ifndef CONFIG_SYS_DISCOVER_PHY
  49 #               define FECDUPLEX        FULL
  50 #               define FECSPEED         _100BASET
  51 #       else
  52 #               ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  53 #                       define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
  54 #               endif
  55 #       endif                   /* CONFIG_SYS_DISCOVER_PHY */
  56 #endif
  57
  58 #define CONFIG_MCFRTC
  59 #undef RTC_DEBUG
  60 #define CONFIG_SYS_RTC_CNT              (0x8000)
  61 #define CONFIG_SYS_RTC_SETUP            (RTC_OCEN_OSCBYP | RTC_OCEN_CLKEN)
  62
  63 /* Timer */
  64 #define CONFIG_MCFTMR
  65 #undef CONFIG_MCFPIT
  66
  67 /* I2C */
  68 #define CONFIG_SYS_I2C
  69 #define CONFIG_SYS_I2C_FSL
  70 #define CONFIG_SYS_FSL_I2C_SPEED        80000
  71 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
  72 #define CONFIG_SYS_FSL_I2C_OFFSET       0x58000
  73 #define CONFIG_SYS_IMMR                 CONFIG_SYS_MBAR
  74
  75 #define CONFIG_UDP_CHECKSUM
  76
  77 #ifdef CONFIG_MCFFEC
  78 #       define CONFIG_IPADDR    192.162.1.2
  79 #       define CONFIG_NETMASK   255.255.255.0
  80 #       define CONFIG_SERVERIP  192.162.1.1
  81 #       define CONFIG_GATEWAYIP 192.162.1.1
  82 #endif                          /* FEC_ENET */
  83
  84 #define CONFIG_HOSTNAME         M53017
  85 #define CONFIG_EXTRA_ENV_SETTINGS               \
  86         "netdev=eth0\0"                         \
  87         "loadaddr=40010000\0"                   \
  88         "u-boot=u-boot.bin\0"                   \
  89         "load=tftp ${loadaddr) ${u-boot}\0"     \
  90         "upd=run load; run prog\0"              \
  91         "prog=prot off 0 3ffff;"                \
  92         "era 0 3ffff;"                          \
  93         "cp.b ${loadaddr} 0 ${filesize};"       \
  94         "save\0"                                \
  95         ""
  96
  97 #define CONFIG_PRAM             512     /* 512 KB */
  98
  99 #define CONFIG_SYS_LOAD_ADDR    0x40010000
 100
 101 #define CONFIG_SYS_CLK          80000000
 102 #define CONFIG_SYS_CPU_CLK      CONFIG_SYS_CLK * 3
 103
 104 #define CONFIG_SYS_MBAR         0xFC000000
 105
 106 /*
 107  * Low Level Configuration Settings
 108  * (address mappings, register initial values, etc.)
 109  * You should know what you are doing if you make changes here.
 110  */
 111 /*
 112  * Definitions for initial stack pointer and data area (in DPRAM)
 113  */
 114 #define CONFIG_SYS_INIT_RAM_ADDR        0x80000000
 115 #define CONFIG_SYS_INIT_RAM_SIZE                0x20000 /* Size of used area in internal SRAM */
 116 #define CONFIG_SYS_INIT_RAM_CTRL        0x221
 117 #define CONFIG_SYS_GBL_DATA_OFFSET      ((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 0x10)
 118 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 119
 120 /*
 121  * Start addresses for the final memory configuration
 122  * (Set up by the startup code)
 123  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 124  */
 125 #define CONFIG_SYS_SDRAM_BASE           0x40000000
 126 #define CONFIG_SYS_SDRAM_SIZE           64      /* SDRAM size in MB */
 127 #define CONFIG_SYS_SDRAM_CFG1           0x43711630
 128 #define CONFIG_SYS_SDRAM_CFG2           0x56670000
 129 #define CONFIG_SYS_SDRAM_CTRL           0xE1092000
 130 #define CONFIG_SYS_SDRAM_EMOD           0x80010000
 131 #define CONFIG_SYS_SDRAM_MODE           0x00CD0000
 132
 133 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE + 0x400
 134 #define CONFIG_SYS_MEMTEST_END          ((CONFIG_SYS_SDRAM_SIZE - 3) << 20)
 135
 136 #define CONFIG_SYS_MONITOR_BASE         (CONFIG_SYS_FLASH_BASE + 0x400)
 137 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)     /* Reserve 256 kB for Monitor */
 138
 139 #define CONFIG_SYS_BOOTPARAMS_LEN       64*1024
 140 #define CONFIG_SYS_MALLOC_LEN           (128 << 10)     /* Reserve 128 kB for malloc() */
 141
 142 /*
 143  * For booting Linux, the board info and command line data
 144  * have to be in the first 8 MB of memory, since this is
 145  * the maximum mapped by the Linux kernel during initialization ??
 146  */
 147 #define CONFIG_SYS_BOOTMAPSZ            (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
 148 #define CONFIG_SYS_BOOTM_LEN            (CONFIG_SYS_SDRAM_SIZE << 20)
 149
 150 /*-----------------------------------------------------------------------
 151  * FLASH organization
 152  */
 153 #define CONFIG_SYS_FLASH_CFI
 154 #ifdef CONFIG_SYS_FLASH_CFI
 155 #       define CONFIG_FLASH_CFI_DRIVER          1
 156 #       define CONFIG_SYS_FLASH_USE_BUFFER_WRITE        1
 157 #       define CONFIG_FLASH_SPANSION_S29WS_N    1
 158 #       define CONFIG_SYS_FLASH_SIZE            0x1000000       /* Max size that the board might have */
 159 #       define CONFIG_SYS_FLASH_CFI_WIDTH       FLASH_CFI_16BIT
 160 #       define CONFIG_SYS_MAX_FLASH_BANKS       1       /* max number of memory banks */
 161 #       define CONFIG_SYS_MAX_FLASH_SECT        137     /* max number of sectors on one chip */
 162 #       define CONFIG_SYS_FLASH_PROTECTION      /* "Real" (hardware) sectors protection */
 163 #endif
 164
 165 #define CONFIG_SYS_FLASH_BASE           CONFIG_SYS_CS0_BASE
 166
 167 /* Configuration for environment
 168  * Environment is embedded in u-boot in the second sector of the flash
 169  */
 170 #define CONFIG_ENV_OFFSET               (CONFIG_SYS_FLASH_BASE + 0x40000)
 171 #define CONFIG_ENV_SIZE                 0x1000
 172 #define CONFIG_ENV_SECT_SIZE            0x8000
 173
 174 #define LDS_BOARD_TEXT \
 175         . = DEFINED(env_offset) ? env_offset : .; \
 176         env/embedded.o(.text*)
 177
 178 /*-----------------------------------------------------------------------
 179  * Cache Configuration
 180  */
 181 #define CONFIG_SYS_CACHELINE_SIZE       16
 182
 183 #define ICACHE_STATUS                   (CONFIG_SYS_INIT_RAM_ADDR + \
 184                                          CONFIG_SYS_INIT_RAM_SIZE - 8)
 185 #define DCACHE_STATUS                   (CONFIG_SYS_INIT_RAM_ADDR + \
 186                                          CONFIG_SYS_INIT_RAM_SIZE - 4)
 187 #define CONFIG_SYS_ICACHE_INV           (CF_CACR_CINVA)
 188 #define CONFIG_SYS_CACHE_ACR0           (CONFIG_SYS_SDRAM_BASE | \
 189                                          CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
 190                                          CF_ACR_EN | CF_ACR_SM_ALL)
 191 #define CONFIG_SYS_CACHE_ICACR          (CF_CACR_EC | CF_CACR_CINVA | \
 192                                          CF_CACR_DCM_P)
 193
 194 /*-----------------------------------------------------------------------
 195  * Chipselect bank definitions
 196  */
 197 /*
 198  * CS0 - NOR Flash
 199  * CS1 - Ext SRAM
 200  * CS2 - Available
 201  * CS3 - Available
 202  * CS4 - Available
 203  * CS5 - Available
 204  */
 205 #define CONFIG_SYS_CS0_BASE             0
 206 #define CONFIG_SYS_CS0_MASK             0x00FF0001
 207 #define CONFIG_SYS_CS0_CTRL             0x00001FA0
 208
 209 #define CONFIG_SYS_CS1_BASE             0xC0000000
 210 #define CONFIG_SYS_CS1_MASK             0x00070001
 211 #define CONFIG_SYS_CS1_CTRL             0x00001FA0
 212
 213 #endif                          /* _M53017EVB_H */