include/configs/P1022DS.h

   1 /*
   2  * Copyright 2010-2012 Freescale Semiconductor, Inc.
   3  * Authors: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
   4  *          Timur Tabi <timur@freescale.com>
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 #include "../board/freescale/common/ics307_clk.h"
  13
  14 #ifdef CONFIG_SDCARD
  15 #define CONFIG_SPL_MMC_MINIMAL
  16 #define CONFIG_SPL_FLUSH_IMAGE
  17 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  18 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
  19 #define CONFIG_SYS_TEXT_BASE            0x11001000
  20 #define CONFIG_SPL_TEXT_BASE            0xf8f81000
  21 #define CONFIG_SPL_PAD_TO               0x20000
  22 #define CONFIG_SPL_MAX_SIZE             (128 * 1024)
  23 #define CONFIG_SYS_MMC_U_BOOT_SIZE      (768 << 10)
  24 #define CONFIG_SYS_MMC_U_BOOT_DST       (0x11000000)
  25 #define CONFIG_SYS_MMC_U_BOOT_START     (0x11000000)
  26 #define CONFIG_SYS_MMC_U_BOOT_OFFS      (128 << 10)
  27 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  28 #define CONFIG_SYS_LDSCRIPT             "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  29 #define CONFIG_SPL_MMC_BOOT
  30 #ifdef CONFIG_SPL_BUILD
  31 #define CONFIG_SPL_COMMON_INIT_DDR
  32 #endif
  33 #endif
  34
  35 #ifdef CONFIG_SPIFLASH
  36 #define CONFIG_SPL_SPI_FLASH_MINIMAL
  37 #define CONFIG_SPL_FLUSH_IMAGE
  38 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  39 #define CONFIG_FSL_LAW          /* Use common FSL init code */
  40 #define CONFIG_SYS_TEXT_BASE            0x11001000
  41 #define CONFIG_SPL_TEXT_BASE            0xf8f81000
  42 #define CONFIG_SPL_PAD_TO               0x20000
  43 #define CONFIG_SPL_MAX_SIZE             (128 * 1024)
  44 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE        (768 << 10)
  45 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST         (0x11000000)
  46 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START       (0x11000000)
  47 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS        (128 << 10)
  48 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  49 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot.lds"
  50 #define CONFIG_SPL_SPI_BOOT
  51 #ifdef CONFIG_SPL_BUILD
  52 #define CONFIG_SPL_COMMON_INIT_DDR
  53 #endif
  54 #endif
  55
  56 #define CONFIG_NAND_FSL_ELBC
  57 #define CONFIG_SYS_NAND_MAX_ECCPOS      56
  58 #define CONFIG_SYS_NAND_MAX_OOBFREE     5
  59
  60 #ifdef CONFIG_NAND
  61 #ifdef CONFIG_TPL_BUILD
  62 #define CONFIG_SPL_NAND_BOOT
  63 #define CONFIG_SPL_FLUSH_IMAGE
  64 #define CONFIG_SPL_NAND_INIT
  65 #define CONFIG_SPL_COMMON_INIT_DDR
  66 #define CONFIG_SPL_MAX_SIZE             (128 << 10)
  67 #define CONFIG_SPL_TEXT_BASE            0xf8f81000
  68 #define CONFIG_SYS_MPC85XX_NO_RESETVEC
  69 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (832 << 10)
  70 #define CONFIG_SYS_NAND_U_BOOT_DST      (0x11000000)
  71 #define CONFIG_SYS_NAND_U_BOOT_START    (0x11000000)
  72 #define CONFIG_SYS_NAND_U_BOOT_OFFS     ((128 + 128) << 10)
  73 #elif defined(CONFIG_SPL_BUILD)
  74 #define CONFIG_SPL_INIT_MINIMAL
  75 #define CONFIG_SPL_FLUSH_IMAGE
  76 #define CONFIG_SPL_TEXT_BASE            0xff800000
  77 #define CONFIG_SPL_MAX_SIZE             4096
  78 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (128 << 10)
  79 #define CONFIG_SYS_NAND_U_BOOT_DST      0xf8f80000
  80 #define CONFIG_SYS_NAND_U_BOOT_START    0xf8f80000
  81 #define CONFIG_SYS_NAND_U_BOOT_OFFS     (128 << 10)
  82 #endif
  83 #define CONFIG_SPL_PAD_TO               0x20000
  84 #define CONFIG_TPL_PAD_TO               0x20000
  85 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  86 #define CONFIG_SYS_TEXT_BASE            0x11001000
  87 #define CONFIG_SYS_LDSCRIPT     "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
  88 #endif
  89
  90 /* High Level Configuration Options */
  91 #define CONFIG_BOOKE                    /* BOOKE */
  92 #define CONFIG_E500                     /* BOOKE e500 family */
  93 #define CONFIG_P1022
  94 #define CONFIG_P1022DS
  95 #define CONFIG_MP                       /* support multiple processors */
  96
  97 #ifndef CONFIG_SYS_TEXT_BASE
  98 #define CONFIG_SYS_TEXT_BASE    0xeff40000
  99 #endif
 100
 101 #ifndef CONFIG_RESET_VECTOR_ADDRESS
 102 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
 103 #endif
 104
 105 #define CONFIG_FSL_ELBC                 /* Has Enhanced localbus controller */
 106 #define CONFIG_PCIE1                    /* PCIE controller 1 (slot 1) */
 107 #define CONFIG_PCIE2                    /* PCIE controller 2 (slot 2) */
 108 #define CONFIG_PCIE3                    /* PCIE controller 3 (ULI bridge) */
 109 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
 110 #define CONFIG_FSL_PCIE_RESET           /* need PCIe reset errata */
 111 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
 112
 113 #define CONFIG_ENABLE_36BIT_PHYS
 114
 115 #ifdef CONFIG_PHYS_64BIT
 116 #define CONFIG_ADDR_MAP
 117 #define CONFIG_SYS_NUM_ADDR_MAP         16      /* number of TLB1 entries */
 118 #endif
 119
 120 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
 121
 122 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk()
 123 #define CONFIG_DDR_CLK_FREQ     get_board_ddr_clk()
 124 #define CONFIG_ICS307_REFCLK_HZ 33333000  /* ICS307 clock chip ref freq */
 125
 126 /*
 127  * These can be toggled for performance analysis, otherwise use default.
 128  */
 129 #define CONFIG_L2_CACHE
 130 #define CONFIG_BTB
 131
 132 #define CONFIG_SYS_MEMTEST_START        0x00000000
 133 #define CONFIG_SYS_MEMTEST_END          0x7fffffff
 134
 135 #define CONFIG_SYS_CCSRBAR              0xffe00000
 136 #define CONFIG_SYS_CCSRBAR_PHYS_LOW     CONFIG_SYS_CCSRBAR
 137
 138 /* IN case of NAND bootloader relocate CCSRBAR in RAMboot code not in the 4k
 139        SPL code*/
 140 #ifdef CONFIG_SPL_BUILD
 141 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
 142 #endif
 143
 144 /* DDR Setup */
 145 #define CONFIG_DDR_SPD
 146 #define CONFIG_VERY_BIG_RAM
 147 #define CONFIG_SYS_FSL_DDR3
 148
 149 #ifdef CONFIG_DDR_ECC
 150 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 151 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 152 #endif
 153
 154 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 155 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 156
 157 #define CONFIG_NUM_DDR_CONTROLLERS      1
 158 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 159 #define CONFIG_CHIP_SELECTS_PER_CTRL    (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
 160
 161 /* I2C addresses of SPD EEPROMs */
 162 #define CONFIG_SYS_SPD_BUS_NUM          1
 163 #define SPD_EEPROM_ADDRESS              0x51    /* CTLR 0 DIMM 0 */
 164
 165 /* These are used when DDR doesn't use SPD.  */
 166 #define CONFIG_SYS_SDRAM_SIZE           2048
 167 #define CONFIG_SYS_SDRAM_SIZE_LAW       LAW_SIZE_2G
 168 #define CONFIG_SYS_DDR_CS0_BNDS         0x0000003F
 169 #define CONFIG_SYS_DDR_CS0_CONFIG       0x80014202
 170 #define CONFIG_SYS_DDR_CS1_BNDS         0x0040007F
 171 #define CONFIG_SYS_DDR_CS1_CONFIG       0x80014202
 172 #define CONFIG_SYS_DDR_TIMING_3         0x00010000
 173 #define CONFIG_SYS_DDR_TIMING_0         0x40110104
 174 #define CONFIG_SYS_DDR_TIMING_1         0x5c5bd746
 175 #define CONFIG_SYS_DDR_TIMING_2         0x0fa8d4ca
 176 #define CONFIG_SYS_DDR_MODE_1           0x00441221
 177 #define CONFIG_SYS_DDR_MODE_2           0x00000000
 178 #define CONFIG_SYS_DDR_INTERVAL         0x0a280100
 179 #define CONFIG_SYS_DDR_DATA_INIT        0xdeadbeef
 180 #define CONFIG_SYS_DDR_CLK_CTRL         0x02800000
 181 #define CONFIG_SYS_DDR_CONTROL          0xc7000008
 182 #define CONFIG_SYS_DDR_CONTROL_2        0x24401041
 183 #define CONFIG_SYS_DDR_TIMING_4         0x00220001
 184 #define CONFIG_SYS_DDR_TIMING_5         0x02401400
 185 #define CONFIG_SYS_DDR_ZQ_CONTROL       0x89080600
 186 #define CONFIG_SYS_DDR_WRLVL_CONTROL    0x8675f608
 187
 188 /*
 189  * Memory map
 190  *
 191  * 0x0000_0000  0x7fff_ffff     DDR                     2G Cacheable
 192  * 0x8000_0000  0xdfff_ffff     PCI Express Mem         1.5G non-cacheable
 193  * 0xffc0_0000  0xffc2_ffff     PCI IO range            192K non-cacheable
 194  *
 195  * Localbus cacheable (TBD)
 196  * 0xXXXX_XXXX  0xXXXX_XXXX     SRAM                    YZ M Cacheable
 197  *
 198  * Localbus non-cacheable
 199  * 0xe000_0000  0xe80f_ffff     Promjet/free            128M non-cacheable
 200  * 0xe800_0000  0xefff_ffff     FLASH                   128M non-cacheable
 201  * 0xff80_0000  0xff80_7fff     NAND                    32K non-cacheable
 202  * 0xffdf_0000  0xffdf_7fff     PIXIS                   32K non-cacheable TLB0
 203  * 0xffd0_0000  0xffd0_3fff     L1 for stack            16K Cacheable TLB0
 204  * 0xffe0_0000  0xffef_ffff     CCSR                    1M non-cacheable
 205  */
 206
 207 /*
 208  * Local Bus Definitions
 209  */
 210 #define CONFIG_SYS_FLASH_BASE           0xe8000000 /* start of FLASH 128M */
 211 #ifdef CONFIG_PHYS_64BIT
 212 #define CONFIG_SYS_FLASH_BASE_PHYS      0xfe8000000ull
 213 #else
 214 #define CONFIG_SYS_FLASH_BASE_PHYS      CONFIG_SYS_FLASH_BASE
 215 #endif
 216
 217 #define CONFIG_FLASH_BR_PRELIM  \
 218         (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V)
 219 #define CONFIG_FLASH_OR_PRELIM  (OR_AM_128MB | 0xff7)
 220
 221 #ifdef CONFIG_NAND
 222 #define CONFIG_SYS_BR1_PRELIM   CONFIG_FLASH_BR_PRELIM  /* NOR Base Address */
 223 #define CONFIG_SYS_OR1_PRELIM   CONFIG_FLASH_OR_PRELIM  /* NOR Options */
 224 #else
 225 #define CONFIG_SYS_BR0_PRELIM   CONFIG_FLASH_BR_PRELIM  /* NOR Base Address */
 226 #define CONFIG_SYS_OR0_PRELIM   CONFIG_FLASH_OR_PRELIM  /* NOR Options */
 227 #endif
 228
 229 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS}
 230 #define CONFIG_SYS_FLASH_QUIET_TEST
 231 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 232
 233 #define CONFIG_SYS_MAX_FLASH_BANKS      1
 234 #define CONFIG_SYS_MAX_FLASH_SECT       1024
 235
 236 #ifndef CONFIG_SYS_MONITOR_BASE
 237 #ifdef CONFIG_SPL_BUILD
 238 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SPL_TEXT_BASE
 239 #else
 240 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE    /* start of monitor */
 241 #endif
 242 #endif
 243
 244 #define CONFIG_FLASH_CFI_DRIVER
 245 #define CONFIG_SYS_FLASH_CFI
 246 #define CONFIG_SYS_FLASH_EMPTY_INFO
 247
 248 /* Nand Flash */
 249 #if defined(CONFIG_NAND_FSL_ELBC)
 250 #define CONFIG_SYS_NAND_BASE            0xff800000
 251 #ifdef CONFIG_PHYS_64BIT
 252 #define CONFIG_SYS_NAND_BASE_PHYS       0xfff800000ull
 253 #else
 254 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 255 #endif
 256
 257 #define CONFIG_SYS_NAND_BASE_LIST       {CONFIG_SYS_NAND_BASE}
 258 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 259 #define CONFIG_CMD_NAND                 1
 260 #define CONFIG_SYS_NAND_BLOCK_SIZE      (256 * 1024)
 261 #define CONFIG_ELBC_NAND_SPL_STATIC_PGSIZE
 262
 263 /* NAND flash config */
 264 #define CONFIG_SYS_NAND_BR_PRELIM  (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 265                                | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
 266                                | BR_PS_8               /* Port Size = 8 bit */ \
 267                                | BR_MS_FCM             /* MSEL = FCM */ \
 268                                | BR_V)                 /* valid */
 269 #define CONFIG_SYS_NAND_OR_PRELIM  (OR_AM_32KB         /* length 256K */ \
 270                                | OR_FCM_PGS            /* Large Page*/ \
 271                                | OR_FCM_CSCT \
 272                                | OR_FCM_CST \
 273                                | OR_FCM_CHT \
 274                                | OR_FCM_SCY_1 \
 275                                | OR_FCM_TRLX \
 276                                | OR_FCM_EHTR)
 277 #ifdef CONFIG_NAND
 278 #define CONFIG_SYS_BR0_PRELIM   CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
 279 #define CONFIG_SYS_OR0_PRELIM   CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 280 #else
 281 #define CONFIG_SYS_BR1_PRELIM   CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
 282 #define CONFIG_SYS_OR1_PRELIM   CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
 283 #endif
 284
 285 #endif /* CONFIG_NAND_FSL_ELBC */
 286
 287 #define CONFIG_BOARD_EARLY_INIT_F
 288 #define CONFIG_BOARD_EARLY_INIT_R
 289 #define CONFIG_MISC_INIT_R
 290 #define CONFIG_HWCONFIG
 291
 292 #define CONFIG_FSL_NGPIXIS
 293 #define PIXIS_BASE              0xffdf0000      /* PIXIS registers */
 294 #ifdef CONFIG_PHYS_64BIT
 295 #define PIXIS_BASE_PHYS         0xfffdf0000ull
 296 #else
 297 #define PIXIS_BASE_PHYS         PIXIS_BASE
 298 #endif
 299
 300 #define CONFIG_SYS_BR2_PRELIM   (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V)
 301 #define CONFIG_SYS_OR2_PRELIM   (OR_AM_32KB | 0x6ff7)
 302
 303 #define PIXIS_LBMAP_SWITCH      7
 304 #define PIXIS_LBMAP_MASK        0xF0
 305 #define PIXIS_LBMAP_ALTBANK     0x20
 306 #define PIXIS_SPD               0x07
 307 #define PIXIS_SPD_SYSCLK_MASK   0x07
 308 #define PIXIS_ELBC_SPI_MASK     0xc0
 309 #define PIXIS_SPI               0x80
 310
 311 #define CONFIG_SYS_INIT_RAM_LOCK
 312 #define CONFIG_SYS_INIT_RAM_ADDR        0xffd00000 /* Initial L1 address */
 313 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000 /* Size of used area in RAM */
 314
 315 #define CONFIG_SYS_GBL_DATA_OFFSET      \
 316         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 317 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 318
 319 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 320 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
 321
 322 /*
 323  * Config the L2 Cache as L2 SRAM
 324 */
 325 #if defined(CONFIG_SPL_BUILD)
 326 #if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH)
 327 #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000
 328 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
 329 #define CONFIG_SYS_L2_SIZE              (256 << 10)
 330 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 331 #define CONFIG_SPL_RELOC_TEXT_BASE      0xf8f81000
 332 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SYS_INIT_L2_ADDR + 116 * 1024)
 333 #define CONFIG_SPL_RELOC_STACK_SIZE     (32 << 10)
 334 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SYS_INIT_L2_ADDR + 148 * 1024)
 335 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (108 << 10)
 336 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L2_ADDR + 112 * 1024)
 337 #elif defined(CONFIG_NAND)
 338 #ifdef CONFIG_TPL_BUILD
 339 #define CONFIG_SYS_INIT_L2_ADDR         0xf8f80000
 340 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
 341 #define CONFIG_SYS_L2_SIZE              (256 << 10)
 342 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 343 #define CONFIG_SPL_RELOC_TEXT_BASE      0xf8f81000
 344 #define CONFIG_SPL_RELOC_STACK          (CONFIG_SYS_INIT_L2_ADDR + 192 * 1024)
 345 #define CONFIG_SPL_RELOC_MALLOC_ADDR    (CONFIG_SYS_INIT_L2_ADDR + 208 * 1024)
 346 #define CONFIG_SPL_RELOC_MALLOC_SIZE    (48 << 10)
 347 #define CONFIG_SPL_GD_ADDR              (CONFIG_SYS_INIT_L2_ADDR + 176 * 1024)
 348 #else
 349 #define CONFIG_SYS_INIT_L2_ADDR         0xf8f80000
 350 #define CONFIG_SYS_INIT_L2_ADDR_PHYS    CONFIG_SYS_INIT_L2_ADDR
 351 #define CONFIG_SYS_L2_SIZE              (256 << 10)
 352 #define CONFIG_SYS_INIT_L2_END  (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
 353 #define CONFIG_SPL_RELOC_TEXT_BASE      (CONFIG_SYS_INIT_L2_END - 0x2000)
 354 #define CONFIG_SPL_RELOC_STACK          ((CONFIG_SYS_INIT_L2_END - 1) & ~0xF)
 355 #endif
 356 #endif
 357 #endif
 358
 359 /*
 360  * Serial Port
 361  */
 362 #define CONFIG_CONS_INDEX               1
 363 #define CONFIG_SYS_NS16550_SERIAL
 364 #define CONFIG_SYS_NS16550_REG_SIZE     1
 365 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 366 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_INIT_MINIMAL)
 367 #define CONFIG_NS16550_MIN_FUNCTIONS
 368 #endif
 369
 370 #define CONFIG_SYS_BAUDRATE_TABLE       \
 371         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 372
 373 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
 374 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
 375
 376 /* Video */
 377
 378 #ifdef CONFIG_FSL_DIU_FB
 379 #define CONFIG_SYS_DIU_ADDR     (CONFIG_SYS_CCSRBAR + 0x10000)
 380 #define CONFIG_CMD_BMP
 381 #define CONFIG_VIDEO_LOGO
 382 #define CONFIG_VIDEO_BMP_LOGO
 383 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
 384 /*
 385  * With CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS, flash I/O is really slow, so
 386  * disable empty flash sector detection, which is I/O-intensive.
 387  */
 388 #undef CONFIG_SYS_FLASH_EMPTY_INFO
 389 #endif
 390
 391 #ifndef CONFIG_FSL_DIU_FB
 392 #endif
 393
 394 #ifdef CONFIG_ATI
 395 #define VIDEO_IO_OFFSET         CONFIG_SYS_PCIE1_IO_VIRT
 396 #define CONFIG_BIOSEMU
 397 #define CONFIG_ATI_RADEON_FB
 398 #define CONFIG_VIDEO_LOGO
 399 #define CONFIG_SYS_ISA_IO_BASE_ADDRESS VIDEO_IO_OFFSET
 400 #endif
 401
 402 /* I2C */
 403 #define CONFIG_SYS_I2C
 404 #define CONFIG_SYS_I2C_FSL
 405 #define CONFIG_SYS_FSL_I2C_SPEED        400000
 406 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 407 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
 408 #define CONFIG_SYS_FSL_I2C2_SPEED       400000
 409 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 410 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x3100
 411 #define CONFIG_SYS_I2C_NOPROBES         {{0, 0x29}}
 412
 413 /*
 414  * I2C2 EEPROM
 415  */
 416 #define CONFIG_ID_EEPROM
 417 #define CONFIG_SYS_I2C_EEPROM_NXID
 418 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 419 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 420 #define CONFIG_SYS_EEPROM_BUS_NUM       1
 421
 422 /*
 423  * eSPI - Enhanced SPI
 424  */
 425
 426 #define CONFIG_HARD_SPI
 427
 428 #define CONFIG_SF_DEFAULT_SPEED         10000000
 429 #define CONFIG_SF_DEFAULT_MODE          0
 430
 431 /*
 432  * General PCI
 433  * Memory space is mapped 1-1, but I/O space must start from 0.
 434  */
 435
 436 /* controller 1, Slot 2, tgtid 1, Base address a000 */
 437 #define CONFIG_SYS_PCIE1_MEM_VIRT       0xc0000000
 438 #ifdef CONFIG_PHYS_64BIT
 439 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 440 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc40000000ull
 441 #else
 442 #define CONFIG_SYS_PCIE1_MEM_BUS        0xc0000000
 443 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc0000000
 444 #endif
 445 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x20000000      /* 512M */
 446 #define CONFIG_SYS_PCIE1_IO_VIRT        0xffc20000
 447 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 448 #ifdef CONFIG_PHYS_64BIT
 449 #define CONFIG_SYS_PCIE1_IO_PHYS        0xfffc20000ull
 450 #else
 451 #define CONFIG_SYS_PCIE1_IO_PHYS        0xffc20000
 452 #endif
 453 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 454
 455 /* controller 2, direct to uli, tgtid 2, Base address 9000 */
 456 #define CONFIG_SYS_PCIE2_MEM_VIRT       0xa0000000
 457 #ifdef CONFIG_PHYS_64BIT
 458 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 459 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc20000000ull
 460 #else
 461 #define CONFIG_SYS_PCIE2_MEM_BUS        0xa0000000
 462 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xa0000000
 463 #endif
 464 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x20000000      /* 512M */
 465 #define CONFIG_SYS_PCIE2_IO_VIRT        0xffc10000
 466 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 467 #ifdef CONFIG_PHYS_64BIT
 468 #define CONFIG_SYS_PCIE2_IO_PHYS        0xfffc10000ull
 469 #else
 470 #define CONFIG_SYS_PCIE2_IO_PHYS        0xffc10000
 471 #endif
 472 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 473
 474 /* controller 3, Slot 1, tgtid 3, Base address b000 */
 475 #define CONFIG_SYS_PCIE3_MEM_VIRT       0x80000000
 476 #ifdef CONFIG_PHYS_64BIT
 477 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 478 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc00000000ull
 479 #else
 480 #define CONFIG_SYS_PCIE3_MEM_BUS        0x80000000
 481 #define CONFIG_SYS_PCIE3_MEM_PHYS       0x80000000
 482 #endif
 483 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x20000000      /* 512M */
 484 #define CONFIG_SYS_PCIE3_IO_VIRT        0xffc00000
 485 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 486 #ifdef CONFIG_PHYS_64BIT
 487 #define CONFIG_SYS_PCIE3_IO_PHYS        0xfffc00000ull
 488 #else
 489 #define CONFIG_SYS_PCIE3_IO_PHYS        0xffc00000
 490 #endif
 491 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 492
 493 #ifdef CONFIG_PCI
 494 #define CONFIG_PCI_INDIRECT_BRIDGE
 495 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 496 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 497 #endif
 498
 499 /* SATA */
 500 #define CONFIG_LIBATA
 501 #define CONFIG_FSL_SATA
 502 #define CONFIG_FSL_SATA_V2
 503
 504 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 505 #define CONFIG_SATA1
 506 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 507 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 508 #define CONFIG_SATA2
 509 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 510 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 511
 512 #ifdef CONFIG_FSL_SATA
 513 #define CONFIG_LBA48
 514 #define CONFIG_CMD_SATA
 515 #define CONFIG_DOS_PARTITION
 516 #endif
 517
 518 #define CONFIG_MMC
 519 #ifdef CONFIG_MMC
 520 #define CONFIG_FSL_ESDHC
 521 #define CONFIG_GENERIC_MMC
 522 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 523 #endif
 524
 525 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI)
 526 #define CONFIG_DOS_PARTITION
 527 #endif
 528
 529 #define CONFIG_TSEC_ENET
 530 #ifdef CONFIG_TSEC_ENET
 531
 532 #define CONFIG_TSECV2
 533
 534 #define CONFIG_MII                      /* MII PHY management */
 535 #define CONFIG_TSEC1            1
 536 #define CONFIG_TSEC1_NAME       "eTSEC1"
 537 #define CONFIG_TSEC2            1
 538 #define CONFIG_TSEC2_NAME       "eTSEC2"
 539
 540 #define TSEC1_PHY_ADDR          1
 541 #define TSEC2_PHY_ADDR          2
 542
 543 #define TSEC1_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 544 #define TSEC2_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 545
 546 #define TSEC1_PHYIDX            0
 547 #define TSEC2_PHYIDX            0
 548
 549 #define CONFIG_ETHPRIME         "eTSEC1"
 550
 551 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 552 #endif
 553
 554 /*
 555  * Dynamic MTD Partition support with mtdparts
 556  */
 557 #define CONFIG_MTD_DEVICE
 558 #define CONFIG_MTD_PARTITIONS
 559 #define CONFIG_CMD_MTDPARTS
 560 #define CONFIG_FLASH_CFI_MTD
 561 #ifdef CONFIG_PHYS_64BIT
 562 #define MTDIDS_DEFAULT "nor0=fe8000000.nor"
 563 #define MTDPARTS_DEFAULT "mtdparts=fe8000000.nor:48m(ramdisk)," \
 564                         "14m(diagnostic),2m(dink),6m(kernel),58112k(fs)," \
 565                         "512k(dtb),768k(u-boot)"
 566 #else
 567 #define MTDIDS_DEFAULT "nor0=e8000000.nor"
 568 #define MTDPARTS_DEFAULT "mtdparts=e8000000.nor:48m(ramdisk)," \
 569                         "14m(diagnostic),2m(dink),6m(kernel),58112k(fs)," \
 570                         "512k(dtb),768k(u-boot)"
 571 #endif
 572
 573 /*
 574  * Environment
 575  */
 576 #ifdef CONFIG_SPIFLASH
 577 #define CONFIG_ENV_IS_IN_SPI_FLASH
 578 #define CONFIG_ENV_SPI_BUS      0
 579 #define CONFIG_ENV_SPI_CS       0
 580 #define CONFIG_ENV_SPI_MAX_HZ   10000000
 581 #define CONFIG_ENV_SPI_MODE     0
 582 #define CONFIG_ENV_SIZE         0x2000  /* 8KB */
 583 #define CONFIG_ENV_OFFSET       0x100000        /* 1MB */
 584 #define CONFIG_ENV_SECT_SIZE    0x10000
 585 #elif defined(CONFIG_SDCARD)
 586 #define CONFIG_ENV_IS_IN_MMC
 587 #define CONFIG_FSL_FIXED_MMC_LOCATION
 588 #define CONFIG_ENV_SIZE         0x2000
 589 #define CONFIG_SYS_MMC_ENV_DEV  0
 590 #elif defined(CONFIG_NAND)
 591 #ifdef CONFIG_TPL_BUILD
 592 #define CONFIG_ENV_SIZE         0x2000
 593 #define CONFIG_ENV_ADDR         (CONFIG_SYS_INIT_L2_ADDR + (160 << 10))
 594 #else
 595 #define CONFIG_ENV_SIZE         CONFIG_SYS_NAND_BLOCK_SIZE
 596 #endif
 597 #define CONFIG_ENV_IS_IN_NAND
 598 #define CONFIG_ENV_OFFSET       (1024 * 1024)
 599 #define CONFIG_ENV_RANGE        (3 * CONFIG_ENV_SIZE)
 600 #elif defined(CONFIG_SYS_RAMBOOT)
 601 #define CONFIG_ENV_IS_NOWHERE   /* Store ENV in memory only */
 602 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - 0x1000)
 603 #define CONFIG_ENV_SIZE         0x2000
 604 #else
 605 #define CONFIG_ENV_IS_IN_FLASH
 606 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 607 #define CONFIG_ENV_SIZE         0x2000
 608 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 609 #endif
 610
 611 #define CONFIG_LOADS_ECHO
 612 #define CONFIG_SYS_LOADS_BAUD_CHANGE
 613
 614 /*
 615  * Command line configuration.
 616  */
 617 #define CONFIG_CMD_ERRATA
 618 #define CONFIG_CMD_IRQ
 619 #define CONFIG_CMD_REGINFO
 620
 621 #ifdef CONFIG_PCI
 622 #define CONFIG_CMD_PCI
 623 #endif
 624
 625 /*
 626  * USB
 627  */
 628 #define CONFIG_HAS_FSL_DR_USB
 629 #ifdef CONFIG_HAS_FSL_DR_USB
 630 #define CONFIG_USB_EHCI
 631
 632 #ifdef CONFIG_USB_EHCI
 633 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 634 #define CONFIG_USB_EHCI_FSL
 635 #endif
 636 #endif
 637
 638 /*
 639  * Miscellaneous configurable options
 640  */
 641 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 642 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 643 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 644 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 645 #ifdef CONFIG_CMD_KGDB
 646 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 647 #else
 648 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 649 #endif
 650 /* Print Buffer Size */
 651 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 652 #define CONFIG_SYS_MAXARGS      16
 653 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
 654
 655 /*
 656  * For booting Linux, the board info and command line data
 657  * have to be in the first 64 MB of memory, since this is
 658  * the maximum mapped by the Linux kernel during initialization.
 659  */
 660 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial Memory map for Linux*/
 661 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 662
 663 #ifdef CONFIG_CMD_KGDB
 664 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 665 #endif
 666
 667 /*
 668  * Environment Configuration
 669  */
 670
 671 #define CONFIG_HOSTNAME         p1022ds
 672 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 673 #define CONFIG_BOOTFILE         "uImage"
 674 #define CONFIG_UBOOTPATH        u-boot.bin      /* U-Boot image on TFTP server */
 675
 676 #define CONFIG_LOADADDR         1000000
 677
 678
 679 #define CONFIG_BAUDRATE 115200
 680
 681 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 682         "netdev=eth0\0"                                         \
 683         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 684         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 685         "tftpflash=tftpboot $loadaddr $uboot && "               \
 686                 "protect off $ubootaddr +$filesize && "         \
 687                 "erase $ubootaddr +$filesize && "               \
 688                 "cp.b $loadaddr $ubootaddr $filesize && "       \
 689                 "protect on $ubootaddr +$filesize && "          \
 690                 "cmp.b $loadaddr $ubootaddr $filesize\0"        \
 691         "consoledev=ttyS0\0"                                    \
 692         "ramdiskaddr=2000000\0"                                 \
 693         "ramdiskfile=rootfs.ext2.gz.uboot\0"                    \
 694         "fdtaddr=1e00000\0"                                     \
 695         "fdtfile=p1022ds.dtb\0"                                 \
 696         "bdev=sda3\0"                                           \
 697         "hwconfig=esdhc;audclk:12\0"
 698
 699 #define CONFIG_HDBOOT                                   \
 700         "setenv bootargs root=/dev/$bdev rw "           \
 701         "console=$consoledev,$baudrate $othbootargs $videobootargs;"    \
 702         "tftp $loadaddr $bootfile;"                     \
 703         "tftp $fdtaddr $fdtfile;"                       \
 704         "bootm $loadaddr - $fdtaddr"
 705
 706 #define CONFIG_NFSBOOTCOMMAND                                           \
 707         "setenv bootargs root=/dev/nfs rw "                             \
 708         "nfsroot=$serverip:$rootpath "                                  \
 709         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 710         "console=$consoledev,$baudrate $othbootargs $videobootargs;"    \
 711         "tftp $loadaddr $bootfile;"                                     \
 712         "tftp $fdtaddr $fdtfile;"                                       \
 713         "bootm $loadaddr - $fdtaddr"
 714
 715 #define CONFIG_RAMBOOTCOMMAND                                           \
 716         "setenv bootargs root=/dev/ram rw "                             \
 717         "console=$consoledev,$baudrate $othbootargs $videobootargs;"    \
 718         "tftp $ramdiskaddr $ramdiskfile;"                               \
 719         "tftp $loadaddr $bootfile;"                                     \
 720         "tftp $fdtaddr $fdtfile;"                                       \
 721         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 722
 723 #define CONFIG_BOOTCOMMAND              CONFIG_RAMBOOTCOMMAND
 724
 725 #endif