include/configs/T1040QDS.h

   1 /*
   2  * Copyright 2013-2014 Freescale Semiconductor, Inc.
   3  *
   4  * See file CREDITS for list of people who contributed to this
   5  * project.
   6  *
   7  * This program is free software; you can redistribute it and/or
   8  * modify it under the terms of the GNU General Public License as
   9  * published by the Free Software Foundation; either version 2 of
  10  * the License, or (at your option) any later version.
  11  *
  12  * This program is distributed in the hope that it will be useful,
  13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  15  * GNU General Public License for more details.
  16  *
  17  * You should have received a copy of the GNU General Public License
  18  * along with this program; if not, write to the Free Software
  19  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  20  * MA 02111-1307 USA
  21  */
  22
  23 #ifndef __CONFIG_H
  24 #define __CONFIG_H
  25
  26 /*
  27  * T1040 QDS board configuration file
  28  */
  29 #define CONFIG_T1040QDS
  30 #define CONFIG_PHYS_64BIT
  31 #define CONFIG_DISPLAY_BOARDINFO
  32
  33 #ifdef CONFIG_RAMBOOT_PBL
  34 #define CONFIG_RAMBOOT_TEXT_BASE        CONFIG_SYS_TEXT_BASE
  35 #define CONFIG_RESET_VECTOR_ADDRESS     0xfffffffc
  36 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t1040qds/t1040_pbi.cfg
  37 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t1040qds/t1040_rcw.cfg
  38 #endif
  39
  40 /* High Level Configuration Options */
  41 #define CONFIG_BOOKE
  42 #define CONFIG_E500                     /* BOOKE e500 family */
  43 #define CONFIG_E500MC                   /* BOOKE e500mc family */
  44 #define CONFIG_SYS_BOOK3E_HV            /* Category E.HV supported */
  45 #define CONFIG_MP                       /* support multiple processors */
  46
  47 /* support deep sleep */
  48 #define CONFIG_DEEP_SLEEP
  49 #if defined(CONFIG_DEEP_SLEEP)
  50 #define CONFIG_SILENT_CONSOLE
  51 #define CONFIG_BOARD_EARLY_INIT_F
  52 #endif
  53
  54 #ifndef CONFIG_SYS_TEXT_BASE
  55 #define CONFIG_SYS_TEXT_BASE    0xeff40000
  56 #endif
  57
  58 #ifndef CONFIG_RESET_VECTOR_ADDRESS
  59 #define CONFIG_RESET_VECTOR_ADDRESS     0xeffffffc
  60 #endif
  61
  62 #define CONFIG_SYS_FSL_CPC              /* Corenet Platform Cache */
  63 #define CONFIG_SYS_NUM_CPC              CONFIG_NUM_DDR_CONTROLLERS
  64 #define CONFIG_FSL_IFC                  /* Enable IFC Support */
  65 #define CONFIG_FSL_CAAM                 /* Enable SEC/CAAM */
  66 #define CONFIG_PCI                      /* Enable PCI/PCIE */
  67 #define CONFIG_PCI_INDIRECT_BRIDGE
  68 #define CONFIG_PCIE1                    /* PCIE controler 1 */
  69 #define CONFIG_PCIE2                    /* PCIE controler 2 */
  70 #define CONFIG_PCIE3                    /* PCIE controler 3 */
  71 #define CONFIG_PCIE4                    /* PCIE controler 4 */
  72
  73 #define CONFIG_FSL_PCI_INIT             /* Use common FSL init code */
  74 #define CONFIG_SYS_PCI_64BIT            /* enable 64-bit PCI resources */
  75
  76 #define CONFIG_FSL_LAW                  /* Use common FSL init code */
  77
  78 #define CONFIG_ENV_OVERWRITE
  79
  80 #ifdef CONFIG_SYS_NO_FLASH
  81 #define CONFIG_ENV_IS_NOWHERE
  82 #else
  83 #define CONFIG_FLASH_CFI_DRIVER
  84 #define CONFIG_SYS_FLASH_CFI
  85 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
  86 #endif
  87
  88 #ifndef CONFIG_SYS_NO_FLASH
  89 #if defined(CONFIG_SPIFLASH)
  90 #define CONFIG_SYS_EXTRA_ENV_RELOC
  91 #define CONFIG_ENV_IS_IN_SPI_FLASH
  92 #define CONFIG_ENV_SPI_BUS              0
  93 #define CONFIG_ENV_SPI_CS               0
  94 #define CONFIG_ENV_SPI_MAX_HZ           10000000
  95 #define CONFIG_ENV_SPI_MODE             0
  96 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
  97 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
  98 #define CONFIG_ENV_SECT_SIZE            0x10000
  99 #elif defined(CONFIG_SDCARD)
 100 #define CONFIG_SYS_EXTRA_ENV_RELOC
 101 #define CONFIG_ENV_IS_IN_MMC
 102 #define CONFIG_SYS_MMC_ENV_DEV          0
 103 #define CONFIG_ENV_SIZE                 0x2000
 104 #define CONFIG_ENV_OFFSET               (512 * 1658)
 105 #elif defined(CONFIG_NAND)
 106 #define CONFIG_SYS_EXTRA_ENV_RELOC
 107 #define CONFIG_ENV_IS_IN_NAND
 108 #define CONFIG_ENV_SIZE                 CONFIG_SYS_NAND_BLOCK_SIZE
 109 #define CONFIG_ENV_OFFSET               (7 * CONFIG_SYS_NAND_BLOCK_SIZE)
 110 #else
 111 #define CONFIG_ENV_IS_IN_FLASH
 112 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 113 #define CONFIG_ENV_SIZE         0x2000
 114 #define CONFIG_ENV_SECT_SIZE    0x20000 /* 128K (one sector) */
 115 #endif
 116 #else /* CONFIG_SYS_NO_FLASH */
 117 #define CONFIG_ENV_SIZE                0x2000
 118 #define CONFIG_ENV_SECT_SIZE   0x20000 /* 128K (one sector) */
 119 #endif
 120
 121 #ifndef __ASSEMBLY__
 122 unsigned long get_board_sys_clk(void);
 123 unsigned long get_board_ddr_clk(void);
 124 #endif
 125
 126 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk() /* sysclk for MPC85xx */
 127 #define CONFIG_DDR_CLK_FREQ     get_board_ddr_clk()
 128
 129 /*
 130  * These can be toggled for performance analysis, otherwise use default.
 131  */
 132 #define CONFIG_SYS_CACHE_STASHING
 133 #define CONFIG_BACKSIDE_L2_CACHE
 134 #define CONFIG_SYS_INIT_L2CSR0          L2CSR0_L2E
 135 #define CONFIG_BTB                      /* toggle branch predition */
 136 #define CONFIG_DDR_ECC
 137 #ifdef CONFIG_DDR_ECC
 138 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
 139 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
 140 #endif
 141
 142 #define CONFIG_ENABLE_36BIT_PHYS
 143
 144 #define CONFIG_ADDR_MAP
 145 #define CONFIG_SYS_NUM_ADDR_MAP         64      /* number of TLB1 entries */
 146
 147 #define CONFIG_SYS_MEMTEST_START        0x00200000      /* memtest works on */
 148 #define CONFIG_SYS_MEMTEST_END          0x00400000
 149 #define CONFIG_SYS_ALT_MEMTEST
 150 #define CONFIG_PANIC_HANG       /* do not reset board on panic */
 151
 152 /*
 153  *  Config the L3 Cache as L3 SRAM
 154  */
 155 #define CONFIG_SYS_INIT_L3_ADDR         0xFFFC0000
 156
 157 #define CONFIG_SYS_DCSRBAR              0xf0000000
 158 #define CONFIG_SYS_DCSRBAR_PHYS         0xf00000000ull
 159
 160 /* EEPROM */
 161 #define CONFIG_ID_EEPROM
 162 #define CONFIG_SYS_I2C_EEPROM_NXID
 163 #define CONFIG_SYS_EEPROM_BUS_NUM       0
 164 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x57
 165 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  1
 166 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
 167 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
 168
 169 /*
 170  * DDR Setup
 171  */
 172 #define CONFIG_VERY_BIG_RAM
 173 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000
 174 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
 175
 176 /* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */
 177 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
 178 #define CONFIG_CHIP_SELECTS_PER_CTRL    (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
 179
 180 #define CONFIG_DDR_SPD
 181 #ifndef CONFIG_SYS_FSL_DDR4
 182 #define CONFIG_SYS_FSL_DDR3
 183 #endif
 184 #define CONFIG_FSL_DDR_INTERACTIVE
 185
 186 #define CONFIG_SYS_SPD_BUS_NUM  0
 187 #define SPD_EEPROM_ADDRESS      0x51
 188
 189 #define CONFIG_SYS_SDRAM_SIZE   4096    /* for fixed parameter use */
 190
 191 /*
 192  * IFC Definitions
 193  */
 194 #define CONFIG_SYS_FLASH_BASE   0xe0000000
 195 #define CONFIG_SYS_FLASH_BASE_PHYS      (0xf00000000ull | CONFIG_SYS_FLASH_BASE)
 196
 197 #define CONFIG_SYS_NOR0_CSPR_EXT        (0xf)
 198 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 199                                 + 0x8000000) | \
 200                                 CSPR_PORT_SIZE_16 | \
 201                                 CSPR_MSEL_NOR | \
 202                                 CSPR_V)
 203 #define CONFIG_SYS_NOR1_CSPR_EXT        (0xf)
 204 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 205                                 CSPR_PORT_SIZE_16 | \
 206                                 CSPR_MSEL_NOR | \
 207                                 CSPR_V)
 208 #define CONFIG_SYS_NOR_AMASK    IFC_AMASK(128*1024*1024)
 209
 210 /*
 211  * TDM Definition
 212  */
 213 #define T1040_TDM_QUIRK_CCSR_BASE       0xfe000000
 214
 215 /* NOR Flash Timing Params */
 216 #define CONFIG_SYS_NOR_CSOR     CSOR_NAND_TRHZ_80
 217 #define CONFIG_SYS_NOR_FTIM0    (FTIM0_NOR_TACSE(0x4) | \
 218                                 FTIM0_NOR_TEADC(0x5) | \
 219                                 FTIM0_NOR_TEAHC(0x5))
 220 #define CONFIG_SYS_NOR_FTIM1    (FTIM1_NOR_TACO(0x35) | \
 221                                 FTIM1_NOR_TRAD_NOR(0x1A) |\
 222                                 FTIM1_NOR_TSEQRAD_NOR(0x13))
 223 #define CONFIG_SYS_NOR_FTIM2    (FTIM2_NOR_TCS(0x4) | \
 224                                 FTIM2_NOR_TCH(0x4) | \
 225                                 FTIM2_NOR_TWPH(0x0E) | \
 226                                 FTIM2_NOR_TWP(0x1c))
 227 #define CONFIG_SYS_NOR_FTIM3    0x0
 228
 229 #define CONFIG_SYS_FLASH_QUIET_TEST
 230 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
 231
 232 #define CONFIG_SYS_MAX_FLASH_BANKS      2       /* number of banks */
 233 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 234 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 235 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 236
 237 #define CONFIG_SYS_FLASH_EMPTY_INFO
 238 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS \
 239                                         + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
 240 #define CONFIG_FSL_QIXIS        /* use common QIXIS code */
 241 #define QIXIS_BASE              0xffdf0000
 242 #define QIXIS_BASE_PHYS         (0xf00000000ull | QIXIS_BASE)
 243 #define QIXIS_LBMAP_SWITCH              0x06
 244 #define QIXIS_LBMAP_MASK                0x0f
 245 #define QIXIS_LBMAP_SHIFT               0
 246 #define QIXIS_LBMAP_DFLTBANK            0x00
 247 #define QIXIS_LBMAP_ALTBANK             0x04
 248 #define QIXIS_RST_CTL_RESET             0x31
 249 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 250 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 251 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 252 #define QIXIS_RST_FORCE_MEM             0x01
 253
 254 #define CONFIG_SYS_CSPR3_EXT    (0xf)
 255 #define CONFIG_SYS_CSPR3        (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
 256                                 | CSPR_PORT_SIZE_8 \
 257                                 | CSPR_MSEL_GPCM \
 258                                 | CSPR_V)
 259 #define CONFIG_SYS_AMASK3       IFC_AMASK(4*1024)
 260 #define CONFIG_SYS_CSOR3        0x0
 261 /* QIXIS Timing parameters for IFC CS3 */
 262 #define CONFIG_SYS_CS3_FTIM0            (FTIM0_GPCM_TACSE(0x0e) | \
 263                                         FTIM0_GPCM_TEADC(0x0e) | \
 264                                         FTIM0_GPCM_TEAHC(0x0e))
 265 #define CONFIG_SYS_CS3_FTIM1            (FTIM1_GPCM_TACO(0xff) | \
 266                                         FTIM1_GPCM_TRAD(0x3f))
 267 #define CONFIG_SYS_CS3_FTIM2            (FTIM2_GPCM_TCS(0x0e) | \
 268                                         FTIM2_GPCM_TCH(0x8) | \
 269                                         FTIM2_GPCM_TWP(0x1f))
 270 #define CONFIG_SYS_CS3_FTIM3            0x0
 271
 272 #define CONFIG_NAND_FSL_IFC
 273 #define CONFIG_SYS_NAND_BASE            0xff800000
 274 #define CONFIG_SYS_NAND_BASE_PHYS       (0xf00000000ull | CONFIG_SYS_NAND_BASE)
 275
 276 #define CONFIG_SYS_NAND_CSPR_EXT        (0xf)
 277 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 278                                 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
 279                                 | CSPR_MSEL_NAND        /* MSEL = NAND */ \
 280                                 | CSPR_V)
 281 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 282
 283 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 284                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 285                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 286                                 | CSOR_NAND_RAL_3       /* RAL = 3Byes */ \
 287                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 288                                 | CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
 289                                 | CSOR_NAND_PB(64))     /*Pages Per Block = 64*/
 290
 291 #define CONFIG_SYS_NAND_ONFI_DETECTION
 292
 293 /* ONFI NAND Flash mode0 Timing Params */
 294 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x07) | \
 295                                         FTIM0_NAND_TWP(0x18)   | \
 296                                         FTIM0_NAND_TWCHT(0x07) | \
 297                                         FTIM0_NAND_TWH(0x0a))
 298 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 299                                         FTIM1_NAND_TWBE(0x39)  | \
 300                                         FTIM1_NAND_TRR(0x0e)   | \
 301                                         FTIM1_NAND_TRP(0x18))
 302 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0x0f) | \
 303                                         FTIM2_NAND_TREH(0x0a) | \
 304                                         FTIM2_NAND_TWHRE(0x1e))
 305 #define CONFIG_SYS_NAND_FTIM3           0x0
 306
 307 #define CONFIG_SYS_NAND_DDR_LAW         11
 308 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 309 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 310 #define CONFIG_CMD_NAND
 311
 312 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 313
 314 #if defined(CONFIG_NAND)
 315 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 316 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 317 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 318 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 319 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 320 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 321 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 322 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 323 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 324 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR0_CSPR
 325 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 326 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 327 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 328 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 329 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 330 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 331 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 332 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR1_CSPR
 333 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 334 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 335 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 336 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 337 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 338 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 339 #else
 340 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 341 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 342 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 343 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 344 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 345 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 346 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 347 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 348 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 349 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR
 350 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 351 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 352 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 353 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 354 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 355 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 356 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
 357 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
 358 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
 359 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
 360 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
 361 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
 362 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
 363 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
 364 #endif
 365
 366 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_TEXT_BASE
 367
 368 #if defined(CONFIG_RAMBOOT_PBL)
 369 #define CONFIG_SYS_RAMBOOT
 370 #endif
 371
 372 #define CONFIG_BOARD_EARLY_INIT_R
 373 #define CONFIG_MISC_INIT_R
 374
 375 #define CONFIG_HWCONFIG
 376
 377 /* define to use L1 as initial stack */
 378 #define CONFIG_L1_INIT_RAM
 379 #define CONFIG_SYS_INIT_RAM_LOCK
 380 #define CONFIG_SYS_INIT_RAM_ADDR        0xfdd00000      /* Initial L1 address */
 381 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH      0xf
 382 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW       0xfe03c000
 383 /* The assembler doesn't like typecast */
 384 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
 385         ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
 386           CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
 387 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 388
 389 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - \
 390                                         GENERATED_GBL_DATA_SIZE)
 391 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 392
 393 #define CONFIG_SYS_MONITOR_LEN          (768 * 1024)
 394 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
 395
 396 /* Serial Port - controlled on board with jumper J8
 397  * open - index 2
 398  * shorted - index 1
 399  */
 400 #define CONFIG_CONS_INDEX       1
 401 #define CONFIG_SYS_NS16550_SERIAL
 402 #define CONFIG_SYS_NS16550_REG_SIZE     1
 403 #define CONFIG_SYS_NS16550_CLK          (get_bus_freq(0)/2)
 404
 405 #define CONFIG_SYS_BAUDRATE_TABLE       \
 406         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 407
 408 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500)
 409 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600)
 410 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500)
 411 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600)
 412 #define CONFIG_SYS_CONSOLE_IS_IN_ENV    /* determine from environment */
 413
 414 /* Video */
 415 #define CONFIG_FSL_DIU_FB
 416 #ifdef CONFIG_FSL_DIU_FB
 417 #define CONFIG_FSL_DIU_CH7301
 418 #define CONFIG_SYS_DIU_ADDR     (CONFIG_SYS_CCSRBAR + 0x180000)
 419 #define CONFIG_VIDEO
 420 #define CONFIG_CMD_BMP
 421 #define CONFIG_CFB_CONSOLE
 422 #define CONFIG_VIDEO_SW_CURSOR
 423 #define CONFIG_VGA_AS_SINGLE_DEVICE
 424 #define CONFIG_VIDEO_LOGO
 425 #define CONFIG_VIDEO_BMP_LOGO
 426 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
 427 /*
 428  * With CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS, flash I/O is really slow, so
 429  * disable empty flash sector detection, which is I/O-intensive.
 430  */
 431 #undef CONFIG_SYS_FLASH_EMPTY_INFO
 432 #endif
 433
 434 /* I2C */
 435 #define CONFIG_SYS_I2C
 436 #define CONFIG_SYS_I2C_FSL              /* Use FSL common I2C driver */
 437 #define CONFIG_SYS_FSL_I2C_SPEED        50000   /* I2C speed in Hz */
 438 #define CONFIG_SYS_FSL_I2C2_SPEED       50000
 439 #define CONFIG_SYS_FSL_I2C3_SPEED       50000
 440 #define CONFIG_SYS_FSL_I2C4_SPEED       50000
 441 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 442 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 443 #define CONFIG_SYS_FSL_I2C3_SLAVE       0x7F
 444 #define CONFIG_SYS_FSL_I2C4_SLAVE       0x7F
 445 #define CONFIG_SYS_FSL_I2C_OFFSET       0x118000
 446 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x118100
 447 #define CONFIG_SYS_FSL_I2C3_OFFSET      0x119000
 448 #define CONFIG_SYS_FSL_I2C4_OFFSET      0x119100
 449
 450 #define I2C_MUX_PCA_ADDR                0x77
 451 #define I2C_MUX_PCA_ADDR_PRI            0x77 /* Primary Mux*/
 452
 453
 454 /* I2C bus multiplexer */
 455 #define I2C_MUX_CH_DEFAULT      0x8
 456 #define I2C_MUX_CH_DIU          0xC
 457
 458 /* LDI/DVI Encoder for display */
 459 #define CONFIG_SYS_I2C_LDI_ADDR         0x38
 460 #define CONFIG_SYS_I2C_DVI_ADDR         0x75
 461
 462 /*
 463  * RTC configuration
 464  */
 465 #define RTC
 466 #define CONFIG_RTC_DS3231               1
 467 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 468
 469 /*
 470  * eSPI - Enhanced SPI
 471  */
 472 #define CONFIG_CMD_SF
 473 #define CONFIG_SF_DEFAULT_SPEED         10000000
 474 #define CONFIG_SF_DEFAULT_MODE          0
 475
 476 /*
 477  * General PCI
 478  * Memory space is mapped 1-1, but I/O space must start from 0.
 479  */
 480
 481 #ifdef CONFIG_PCI
 482 /* controller 1, direct to uli, tgtid 3, Base address 20000 */
 483 #ifdef CONFIG_PCIE1
 484 #define CONFIG_SYS_PCIE1_MEM_VIRT       0x80000000
 485 #define CONFIG_SYS_PCIE1_MEM_BUS        0xe0000000
 486 #define CONFIG_SYS_PCIE1_MEM_PHYS       0xc00000000ull
 487 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x10000000      /* 256M */
 488 #define CONFIG_SYS_PCIE1_IO_VIRT        0xf8000000
 489 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 490 #define CONFIG_SYS_PCIE1_IO_PHYS        0xff8000000ull
 491 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00010000      /* 64k */
 492 #endif
 493
 494 /* controller 2, Slot 2, tgtid 2, Base address 201000 */
 495 #ifdef CONFIG_PCIE2
 496 #define CONFIG_SYS_PCIE2_MEM_VIRT       0x90000000
 497 #define CONFIG_SYS_PCIE2_MEM_BUS        0xe0000000
 498 #define CONFIG_SYS_PCIE2_MEM_PHYS       0xc10000000ull
 499 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000      /* 256M */
 500 #define CONFIG_SYS_PCIE2_IO_VIRT        0xf8010000
 501 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 502 #define CONFIG_SYS_PCIE2_IO_PHYS        0xff8010000ull
 503 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00010000      /* 64k */
 504 #endif
 505
 506 /* controller 3, Slot 1, tgtid 1, Base address 202000 */
 507 #ifdef CONFIG_PCIE3
 508 #define CONFIG_SYS_PCIE3_MEM_VIRT       0xa0000000
 509 #define CONFIG_SYS_PCIE3_MEM_BUS        0xe0000000
 510 #define CONFIG_SYS_PCIE3_MEM_PHYS       0xc20000000ull
 511 #define CONFIG_SYS_PCIE3_MEM_SIZE       0x10000000      /* 256M */
 512 #define CONFIG_SYS_PCIE3_IO_VIRT        0xf8020000
 513 #define CONFIG_SYS_PCIE3_IO_BUS         0x00000000
 514 #define CONFIG_SYS_PCIE3_IO_PHYS        0xff8020000ull
 515 #define CONFIG_SYS_PCIE3_IO_SIZE        0x00010000      /* 64k */
 516 #endif
 517
 518 /* controller 4, Base address 203000 */
 519 #ifdef CONFIG_PCIE4
 520 #define CONFIG_SYS_PCIE4_MEM_VIRT       0xb0000000
 521 #define CONFIG_SYS_PCIE4_MEM_BUS        0xe0000000
 522 #define CONFIG_SYS_PCIE4_MEM_PHYS       0xc30000000ull
 523 #define CONFIG_SYS_PCIE4_MEM_SIZE       0x10000000      /* 256M */
 524 #define CONFIG_SYS_PCIE4_IO_VIRT        0xf8030000
 525 #define CONFIG_SYS_PCIE4_IO_BUS         0x00000000
 526 #define CONFIG_SYS_PCIE4_IO_PHYS        0xff8030000ull
 527 #define CONFIG_SYS_PCIE4_IO_SIZE        0x00010000      /* 64k */
 528 #endif
 529
 530 #define CONFIG_PCI_PNP                  /* do pci plug-and-play */
 531
 532 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup */
 533 #define CONFIG_DOS_PARTITION
 534 #endif  /* CONFIG_PCI */
 535
 536 /* SATA */
 537 #define CONFIG_FSL_SATA_V2
 538 #ifdef CONFIG_FSL_SATA_V2
 539 #define CONFIG_LIBATA
 540 #define CONFIG_FSL_SATA
 541
 542 #define CONFIG_SYS_SATA_MAX_DEVICE      2
 543 #define CONFIG_SATA1
 544 #define CONFIG_SYS_SATA1                CONFIG_SYS_MPC85xx_SATA1_ADDR
 545 #define CONFIG_SYS_SATA1_FLAGS          FLAGS_DMA
 546 #define CONFIG_SATA2
 547 #define CONFIG_SYS_SATA2                CONFIG_SYS_MPC85xx_SATA2_ADDR
 548 #define CONFIG_SYS_SATA2_FLAGS          FLAGS_DMA
 549
 550 #define CONFIG_LBA48
 551 #define CONFIG_CMD_SATA
 552 #define CONFIG_DOS_PARTITION
 553 #define CONFIG_CMD_EXT2
 554 #endif
 555
 556 /*
 557 * USB
 558 */
 559 #define CONFIG_HAS_FSL_DR_USB
 560
 561 #ifdef CONFIG_HAS_FSL_DR_USB
 562 #define CONFIG_USB_EHCI
 563
 564 #ifdef CONFIG_USB_EHCI
 565 #define CONFIG_CMD_USB
 566 #define CONFIG_USB_STORAGE
 567 #define CONFIG_USB_EHCI_FSL
 568 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 569 #define CONFIG_CMD_EXT2
 570 #endif
 571 #endif
 572
 573 #define CONFIG_MMC
 574
 575 #ifdef CONFIG_MMC
 576 #define CONFIG_FSL_ESDHC
 577 #define CONFIG_FSL_ESDHC_USE_PERIPHERAL_CLK
 578 #define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
 579 #define CONFIG_CMD_MMC
 580 #define CONFIG_GENERIC_MMC
 581 #define CONFIG_CMD_EXT2
 582 #define CONFIG_CMD_FAT
 583 #define CONFIG_DOS_PARTITION
 584 #define CONFIG_FSL_ESDHC_ADAPTER_IDENT
 585 #endif
 586
 587 /* Qman/Bman */
 588 #ifndef CONFIG_NOBQFMAN
 589 #define CONFIG_SYS_DPAA_QBMAN           /* Support Q/Bman */
 590 #define CONFIG_SYS_BMAN_NUM_PORTALS     10
 591 #define CONFIG_SYS_BMAN_MEM_BASE        0xf4000000
 592 #define CONFIG_SYS_BMAN_MEM_PHYS        0xff4000000ull
 593 #define CONFIG_SYS_BMAN_MEM_SIZE        0x02000000
 594 #define CONFIG_SYS_BMAN_SP_CENA_SIZE    0x4000
 595 #define CONFIG_SYS_BMAN_SP_CINH_SIZE    0x1000
 596 #define CONFIG_SYS_BMAN_CENA_BASE       CONFIG_SYS_BMAN_MEM_BASE
 597 #define CONFIG_SYS_BMAN_CENA_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 598 #define CONFIG_SYS_BMAN_CINH_BASE       (CONFIG_SYS_BMAN_MEM_BASE + \
 599                                         CONFIG_SYS_BMAN_CENA_SIZE)
 600 #define CONFIG_SYS_BMAN_CINH_SIZE       (CONFIG_SYS_BMAN_MEM_SIZE >> 1)
 601 #define CONFIG_SYS_BMAN_SWP_ISDR_REG    0xE08
 602 #define CONFIG_SYS_QMAN_NUM_PORTALS     10
 603 #define CONFIG_SYS_QMAN_MEM_BASE        0xf6000000
 604 #define CONFIG_SYS_QMAN_MEM_PHYS        0xff6000000ull
 605 #define CONFIG_SYS_QMAN_MEM_SIZE        0x02000000
 606 #define CONFIG_SYS_QMAN_SP_CENA_SIZE    0x4000
 607 #define CONFIG_SYS_QMAN_SP_CINH_SIZE    0x1000
 608 #define CONFIG_SYS_QMAN_CENA_BASE       CONFIG_SYS_QMAN_MEM_BASE
 609 #define CONFIG_SYS_QMAN_CENA_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 610 #define CONFIG_SYS_QMAN_CINH_BASE       (CONFIG_SYS_QMAN_MEM_BASE + \
 611                                         CONFIG_SYS_QMAN_CENA_SIZE)
 612 #define CONFIG_SYS_QMAN_CINH_SIZE       (CONFIG_SYS_QMAN_MEM_SIZE >> 1)
 613 #define CONFIG_SYS_QMAN_SWP_ISDR_REG    0xE08
 614
 615 #define CONFIG_SYS_DPAA_FMAN
 616 #define CONFIG_SYS_DPAA_PME
 617
 618 #define CONFIG_QE
 619 #define CONFIG_U_QE
 620 /* Default address of microcode for the Linux Fman driver */
 621 #if defined(CONFIG_SPIFLASH)
 622 /*
 623  * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
 624  * env, so we got 0x110000.
 625  */
 626 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 627 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000
 628 #elif defined(CONFIG_SDCARD)
 629 /*
 630  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 631  * about 825KB (1650 blocks), Env is stored after the image, and the env size is
 632  * 0x2000 (16 blocks), 8 + 1650 + 16 = 1674, enlarge it to 1680.
 633  */
 634 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 635 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 1680)
 636 #elif defined(CONFIG_NAND)
 637 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 638 #define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE)
 639 #else
 640 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 641 #define CONFIG_SYS_FMAN_FW_ADDR         0xEFF00000
 642 #define CONFIG_SYS_QE_FW_ADDR           0xEFF10000
 643 #endif
 644 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 645 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 646 #endif /* CONFIG_NOBQFMAN */
 647
 648 #ifdef CONFIG_SYS_DPAA_FMAN
 649 #define CONFIG_FMAN_ENET
 650 #define CONFIG_PHYLIB_10G
 651 #define CONFIG_PHY_VITESSE
 652 #define CONFIG_PHY_REALTEK
 653 #define CONFIG_PHY_TERANETICS
 654 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
 655 #define SGMII_CARD_PORT2_PHY_ADDR 0x10
 656 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
 657 #define SGMII_CARD_PORT4_PHY_ADDR 0x11
 658 #endif
 659
 660 #ifdef CONFIG_FMAN_ENET
 661 #define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR  0x01
 662 #define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR  0x02
 663
 664 #define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR    0x1c
 665 #define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR    0x1d
 666 #define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR    0x1e
 667 #define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR    0x1f
 668
 669 #define CONFIG_MII              /* MII PHY management */
 670 #define CONFIG_ETHPRIME         "FM1@DTSEC1"
 671 #define CONFIG_PHY_GIGE         /* Include GbE speed/duplex detection */
 672 #endif
 673
 674 /* Enable VSC9953 L2 Switch driver */
 675 #define CONFIG_VSC9953
 676 #define CONFIG_CMD_ETHSW
 677 #define CONFIG_SYS_FM1_QSGMII11_PHY_ADDR        0x14
 678 #define CONFIG_SYS_FM1_QSGMII21_PHY_ADDR        0x18
 679
 680 /*
 681  * Dynamic MTD Partition support with mtdparts
 682  */
 683 #ifndef CONFIG_SYS_NO_FLASH
 684 #define CONFIG_MTD_DEVICE
 685 #define CONFIG_MTD_PARTITIONS
 686 #define CONFIG_CMD_MTDPARTS
 687 #define CONFIG_FLASH_CFI_MTD
 688 #define MTDIDS_DEFAULT "nor0=fe8000000.nor,nand0=fff800000.flash," \
 689                         "spi0=spife110000.0"
 690 #define MTDPARTS_DEFAULT        "mtdparts=fe8000000.nor:1m(uboot),5m(kernel)," \
 691                                 "128k(dtb),96m(fs),-(user);"\
 692                                 "fff800000.flash:2m(uboot),9m(kernel),"\
 693                                 "128k(dtb),96m(fs),-(user);spife110000.0:" \
 694                                 "2m(uboot),9m(kernel),128k(dtb),-(user)"
 695 #endif
 696
 697 /*
 698  * Environment
 699  */
 700 #define CONFIG_LOADS_ECHO               /* echo on for serial download */
 701 #define CONFIG_SYS_LOADS_BAUD_CHANGE    /* allow baudrate change */
 702
 703 /*
 704  * Command line configuration.
 705  */
 706 #define CONFIG_CMD_DATE
 707 #define CONFIG_CMD_DHCP
 708 #define CONFIG_CMD_EEPROM
 709 #define CONFIG_CMD_ERRATA
 710 #define CONFIG_CMD_GREPENV
 711 #define CONFIG_CMD_IRQ
 712 #define CONFIG_CMD_I2C
 713 #define CONFIG_CMD_MII
 714 #define CONFIG_CMD_PING
 715 #define CONFIG_CMD_REGINFO
 716
 717 #ifdef CONFIG_PCI
 718 #define CONFIG_CMD_PCI
 719 #endif
 720
 721 /* Hash command with SHA acceleration supported in hardware */
 722 #ifdef CONFIG_FSL_CAAM
 723 #define CONFIG_CMD_HASH
 724 #define CONFIG_SHA_HW_ACCEL
 725 #endif
 726
 727 /*
 728  * Miscellaneous configurable options
 729  */
 730 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 731 #define CONFIG_CMDLINE_EDITING                  /* Command-line editing */
 732 #define CONFIG_AUTO_COMPLETE                    /* add autocompletion support */
 733 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 734 #ifdef CONFIG_CMD_KGDB
 735 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O Buffer Size */
 736 #else
 737 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 738 #endif
 739 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
 740 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 741 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
 742
 743 /*
 744  * For booting Linux, the board info and command line data
 745  * have to be in the first 64 MB of memory, since this is
 746  * the maximum mapped by the Linux kernel during initialization.
 747  */
 748 #define CONFIG_SYS_BOOTMAPSZ    (64 << 20)      /* Initial map for Linux*/
 749 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* Increase max gunzip size */
 750
 751 #ifdef CONFIG_CMD_KGDB
 752 #define CONFIG_KGDB_BAUDRATE    230400  /* speed to run kgdb serial port */
 753 #endif
 754
 755 /*
 756  * Environment Configuration
 757  */
 758 #define CONFIG_ROOTPATH         "/opt/nfsroot"
 759 #define CONFIG_BOOTFILE         "uImage"
 760 #define CONFIG_UBOOTPATH        "u-boot.bin"    /* U-Boot image on TFTP server*/
 761
 762 /* default location for tftp and bootm */
 763 #define CONFIG_LOADADDR         1000000
 764
 765 #define CONFIG_BOOTDELAY        10      /* -1 disables auto-boot */
 766
 767 #define CONFIG_BAUDRATE 115200
 768
 769 #define __USB_PHY_TYPE  utmi
 770
 771 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 772         "hwconfig=fsl_ddr:bank_intlv=auto;"                     \
 773         "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
 774         "netdev=eth0\0"                                         \
 775         "video-mode=fslfb:1024x768-32@60,monitor=dvi\0"         \
 776         "uboot=" __stringify(CONFIG_UBOOTPATH) "\0"             \
 777         "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"     \
 778         "tftpflash=tftpboot $loadaddr $uboot && "               \
 779         "protect off $ubootaddr +$filesize && "                 \
 780         "erase $ubootaddr +$filesize && "                       \
 781         "cp.b $loadaddr $ubootaddr $filesize && "               \
 782         "protect on $ubootaddr +$filesize && "                  \
 783         "cmp.b $loadaddr $ubootaddr $filesize\0"                \
 784         "consoledev=ttyS0\0"                                    \
 785         "ramdiskaddr=2000000\0"                                 \
 786         "ramdiskfile=t1040qds/ramdisk.uboot\0"                  \
 787         "fdtaddr=c00000\0"                                      \
 788         "fdtfile=t1040qds/t1040qds.dtb\0"                       \
 789         "bdev=sda3\0"
 790
 791 #define CONFIG_LINUX                       \
 792         "setenv bootargs root=/dev/ram rw "            \
 793         "console=$consoledev,$baudrate $othbootargs;"  \
 794         "setenv ramdiskaddr 0x02000000;"               \
 795         "setenv fdtaddr 0x00c00000;"                   \
 796         "setenv loadaddr 0x1000000;"                   \
 797         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 798
 799 #define CONFIG_HDBOOT                                   \
 800         "setenv bootargs root=/dev/$bdev rw "           \
 801         "console=$consoledev,$baudrate $othbootargs;"   \
 802         "tftp $loadaddr $bootfile;"                     \
 803         "tftp $fdtaddr $fdtfile;"                       \
 804         "bootm $loadaddr - $fdtaddr"
 805
 806 #define CONFIG_NFSBOOTCOMMAND                   \
 807         "setenv bootargs root=/dev/nfs rw "     \
 808         "nfsroot=$serverip:$rootpath "          \
 809         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 810         "console=$consoledev,$baudrate $othbootargs;"   \
 811         "tftp $loadaddr $bootfile;"             \
 812         "tftp $fdtaddr $fdtfile;"               \
 813         "bootm $loadaddr - $fdtaddr"
 814
 815 #define CONFIG_RAMBOOTCOMMAND                           \
 816         "setenv bootargs root=/dev/ram rw "             \
 817         "console=$consoledev,$baudrate $othbootargs;"   \
 818         "tftp $ramdiskaddr $ramdiskfile;"               \
 819         "tftp $loadaddr $bootfile;"                     \
 820         "tftp $fdtaddr $fdtfile;"                       \
 821         "bootm $loadaddr $ramdiskaddr $fdtaddr"
 822
 823 #define CONFIG_BOOTCOMMAND              CONFIG_LINUX
 824
 825 #include <asm/fsl_secure_boot.h>
 826
 827 #endif  /* __CONFIG_H */