include/configs/TQM823M.h

   1 /*
   2  * (C) Copyright 2000-2014
   3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 /*
   9  * board/config.h - configuration options, board specific
  10  */
  11
  12 #ifndef __CONFIG_H
  13 #define __CONFIG_H
  14
  15 /*
  16  * High Level Configuration Options
  17  * (easy to change)
  18  */
  19
  20 #define CONFIG_MPC823           1       /* This is a MPC823 CPU         */
  21 #define CONFIG_TQM823M          1       /* ...on a TQM8xxM module       */
  22
  23 #define CONFIG_SYS_TEXT_BASE    0x40000000
  24
  25 #ifdef  CONFIG_LCD                      /* with LCD controller ?        */
  26 #define CONFIG_MPC8XX_LCD
  27 /* #define CONFIG_NEC_NL6448BC20 1 / * use NEC NL6448BC20 display       */
  28 #endif
  29
  30 #define CONFIG_8xx_CONS_SMC1    1       /* Console is on SMC1           */
  31 #define CONFIG_SYS_SMC_RXBUFLEN 128
  32 #define CONFIG_SYS_MAXIDLE      10
  33
  34 #define CONFIG_BOOTCOUNT_LIMIT
  35
  36
  37 #define CONFIG_BOARD_TYPES      1       /* support board types          */
  38
  39 #define CONFIG_PREBOOT  "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo"
  40
  41 #undef  CONFIG_BOOTARGS
  42
  43 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
  44         "netdev=eth0\0"                                                 \
  45         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
  46                 "nfsroot=${serverip}:${rootpath}\0"                     \
  47         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
  48         "addip=setenv bootargs ${bootargs} "                            \
  49                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
  50                 ":${hostname}:${netdev}:off panic=1\0"                  \
  51         "flash_nfs=run nfsargs addip;"                                  \
  52                 "bootm ${kernel_addr}\0"                                \
  53         "flash_self=run ramargs addip;"                                 \
  54                 "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
  55         "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"     \
  56         "rootpath=/opt/eldk/ppc_8xx\0"                                  \
  57         "hostname=TQM823M\0"                                            \
  58         "bootfile=TQM823M/uImage\0"                                     \
  59         "fdt_addr=40080000\0"                                           \
  60         "kernel_addr=400A0000\0"                                        \
  61         "ramdisk_addr=40280000\0"                                       \
  62         "u-boot=TQM823M/u-image.bin\0"                                  \
  63         "load=tftp 200000 ${u-boot}\0"                                  \
  64         "update=prot off 40000000 +${filesize};"                        \
  65                 "era 40000000 +${filesize};"                            \
  66                 "cp.b 200000 40000000 ${filesize};"                     \
  67                 "sete filesize;save\0"                                  \
  68         ""
  69 #define CONFIG_BOOTCOMMAND      "run flash_self"
  70
  71 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download  */
  72 #undef  CONFIG_SYS_LOADS_BAUD_CHANGE            /* don't allow baudrate change  */
  73
  74 #undef  CONFIG_WATCHDOG                 /* watchdog disabled            */
  75
  76 #undef  CONFIG_CAN_DRIVER               /* CAN Driver support disabled  */
  77
  78 /*
  79  * BOOTP options
  80  */
  81 #define CONFIG_BOOTP_SUBNETMASK
  82 #define CONFIG_BOOTP_GATEWAY
  83 #define CONFIG_BOOTP_HOSTNAME
  84 #define CONFIG_BOOTP_BOOTPATH
  85 #define CONFIG_BOOTP_BOOTFILESIZE
  86
  87 #define CONFIG_RTC_MPC8xx               /* use internal RTC of MPC8xx   */
  88
  89 /*
  90  * Command line configuration.
  91  */
  92
  93 #define CONFIG_NETCONSOLE
  94
  95 /*
  96  * Miscellaneous configurable options
  97  */
  98 #define CONFIG_SYS_LONGHELP                     /* undef to save memory         */
  99
 100 #define CONFIG_CMDLINE_EDITING  1       /* add command line history     */
 101
 102 #if defined(CONFIG_CMD_KGDB)
 103 #define CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size      */
 104 #else
 105 #define CONFIG_SYS_CBSIZE               256     /* Console I/O Buffer Size      */
 106 #endif
 107 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 108 #define CONFIG_SYS_MAXARGS              16      /* max number of command args   */
 109 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size    */
 110
 111 #define CONFIG_SYS_MEMTEST_START        0x0400000       /* memtest works on     */
 112 #define CONFIG_SYS_MEMTEST_END          0x0C00000       /* 4 ... 12 MB in DRAM  */
 113
 114 #define CONFIG_SYS_LOAD_ADDR            0x100000        /* default load address */
 115
 116 /*
 117  * Low Level Configuration Settings
 118  * (address mappings, register initial values, etc.)
 119  * You should know what you are doing if you make changes here.
 120  */
 121 /*-----------------------------------------------------------------------
 122  * Internal Memory Mapped Register
 123  */
 124 #define CONFIG_SYS_IMMR         0xFFF00000
 125
 126 /*-----------------------------------------------------------------------
 127  * Definitions for initial stack pointer and data area (in DPRAM)
 128  */
 129 #define CONFIG_SYS_INIT_RAM_ADDR        CONFIG_SYS_IMMR
 130 #define CONFIG_SYS_INIT_RAM_SIZE        0x2F00  /* Size of used area in DPRAM   */
 131 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 132 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 133
 134 /*-----------------------------------------------------------------------
 135  * Start addresses for the final memory configuration
 136  * (Set up by the startup code)
 137  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 138  */
 139 #define CONFIG_SYS_SDRAM_BASE           0x00000000
 140 #define CONFIG_SYS_FLASH_BASE           0x40000000
 141 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)     /* Reserve 256 kB for Monitor   */
 142 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
 143 #define CONFIG_SYS_MALLOC_LEN           (128 << 10)     /* Reserve 128 kB for malloc()  */
 144
 145 /*
 146  * For booting Linux, the board info and command line data
 147  * have to be in the first 8 MB of memory, since this is
 148  * the maximum mapped by the Linux kernel during initialization.
 149  */
 150 #define CONFIG_SYS_BOOTMAPSZ            (8 << 20)       /* Initial Memory map for Linux */
 151
 152 /*-----------------------------------------------------------------------
 153  * FLASH organization
 154  */
 155
 156 /* use CFI flash driver */
 157 #define CONFIG_SYS_FLASH_CFI            1       /* Flash is CFI conformant */
 158 #define CONFIG_FLASH_CFI_DRIVER 1       /* Use the common driver */
 159 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_FLASH_BASE }
 160 #define CONFIG_SYS_FLASH_EMPTY_INFO
 161 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE       1
 162 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* max number of memory banks */
 163 #define CONFIG_SYS_MAX_FLASH_SECT       256     /* max number of sectors on one chip */
 164
 165 #define CONFIG_ENV_IS_IN_FLASH  1
 166 #define CONFIG_ENV_OFFSET               0x40000 /*   Offset   of Environment Sector     */
 167 #define CONFIG_ENV_SIZE         0x08000 /* Total Size of Environment            */
 168 #define CONFIG_ENV_SECT_SIZE    0x20000 /* Total Size of Environment Sector     */
 169
 170 /* Address and size of Redundant Environment Sector     */
 171 #define CONFIG_ENV_OFFSET_REDUND        (CONFIG_ENV_OFFSET+CONFIG_ENV_SECT_SIZE)
 172 #define CONFIG_ENV_SIZE_REDUND  (CONFIG_ENV_SIZE)
 173
 174 #define CONFIG_SYS_USE_PPCENV                   /* Environment embedded in sect .ppcenv */
 175
 176 #define CONFIG_MISC_INIT_R              /* Make sure to remap flashes correctly */
 177
 178 /*-----------------------------------------------------------------------
 179  * Dynamic MTD partition support
 180  */
 181 #define CONFIG_CMD_MTDPARTS
 182 #define CONFIG_MTD_DEVICE               /* needed for mtdparts commands */
 183 #define CONFIG_FLASH_CFI_MTD
 184 #define MTDIDS_DEFAULT          "nor0=TQM8xxM-0"
 185
 186 #define MTDPARTS_DEFAULT        "mtdparts=TQM8xxM-0:512k(u-boot),"      \
 187                                                 "128k(dtb),"            \
 188                                                 "1920k(kernel),"        \
 189                                                 "5632(rootfs),"         \
 190                                                 "4m(data)"
 191
 192 /*-----------------------------------------------------------------------
 193  * Hardware Information Block
 194  */
 195 #define CONFIG_SYS_HWINFO_OFFSET        0x0003FFC0      /* offset of HW Info block */
 196 #define CONFIG_SYS_HWINFO_SIZE          0x00000040      /* size   of HW Info block */
 197 #define CONFIG_SYS_HWINFO_MAGIC 0x54514D38      /* 'TQM8' */
 198
 199 /*-----------------------------------------------------------------------
 200  * Cache Configuration
 201  */
 202 #define CONFIG_SYS_CACHELINE_SIZE       16      /* For all MPC8xx CPUs                  */
 203 #if defined(CONFIG_CMD_KGDB)
 204 #define CONFIG_SYS_CACHELINE_SHIFT      4       /* log base 2 of the above value        */
 205 #endif
 206
 207 /*-----------------------------------------------------------------------
 208  * SYPCR - System Protection Control                            11-9
 209  * SYPCR can only be written once after reset!
 210  *-----------------------------------------------------------------------
 211  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
 212  */
 213 #if defined(CONFIG_WATCHDOG)
 214 #define CONFIG_SYS_SYPCR        (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 215                          SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 216 #else
 217 #define CONFIG_SYS_SYPCR        (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 218 #endif
 219
 220 /*-----------------------------------------------------------------------
 221  * SIUMCR - SIU Module Configuration                            11-6
 222  *-----------------------------------------------------------------------
 223  * PCMCIA config., multi-function pin tri-state
 224  */
 225 #ifndef CONFIG_CAN_DRIVER
 226 #define CONFIG_SYS_SIUMCR       (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 227 #else   /* we must activate GPL5 in the SIUMCR for CAN */
 228 #define CONFIG_SYS_SIUMCR       (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 229 #endif  /* CONFIG_CAN_DRIVER */
 230
 231 /*-----------------------------------------------------------------------
 232  * TBSCR - Time Base Status and Control                         11-26
 233  *-----------------------------------------------------------------------
 234  * Clear Reference Interrupt Status, Timebase freezing enabled
 235  */
 236 #define CONFIG_SYS_TBSCR        (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 237
 238 /*-----------------------------------------------------------------------
 239  * RTCSC - Real-Time Clock Status and Control Register          11-27
 240  *-----------------------------------------------------------------------
 241  */
 242 #define CONFIG_SYS_RTCSC        (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
 243
 244 /*-----------------------------------------------------------------------
 245  * PISCR - Periodic Interrupt Status and Control                11-31
 246  *-----------------------------------------------------------------------
 247  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
 248  */
 249 #define CONFIG_SYS_PISCR        (PISCR_PS | PISCR_PITF)
 250
 251 /*-----------------------------------------------------------------------
 252  * PLPRCR - PLL, Low-Power, and Reset Control Register          15-30
 253  *-----------------------------------------------------------------------
 254  * Reset PLL lock status sticky bit, timer expired status bit and timer
 255  * interrupt status bit
 256  */
 257 #define CONFIG_SYS_PLPRCR       (PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
 258
 259 /*-----------------------------------------------------------------------
 260  * SCCR - System Clock and reset Control Register               15-27
 261  *-----------------------------------------------------------------------
 262  * Set clock output, timebase and RTC source and divider,
 263  * power management and some other internal clocks
 264  */
 265 #define SCCR_MASK       SCCR_EBDF11
 266 #define CONFIG_SYS_SCCR (SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 267                          SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
 268                          SCCR_DFALCD00)
 269
 270 /*-----------------------------------------------------------------------
 271  * PCMCIA stuff
 272  *-----------------------------------------------------------------------
 273  *
 274  */
 275 #define CONFIG_SYS_PCMCIA_MEM_ADDR      (0xE0000000)
 276 #define CONFIG_SYS_PCMCIA_MEM_SIZE      ( 64 << 20 )
 277 #define CONFIG_SYS_PCMCIA_DMA_ADDR      (0xE4000000)
 278 #define CONFIG_SYS_PCMCIA_DMA_SIZE      ( 64 << 20 )
 279 #define CONFIG_SYS_PCMCIA_ATTRB_ADDR    (0xE8000000)
 280 #define CONFIG_SYS_PCMCIA_ATTRB_SIZE    ( 64 << 20 )
 281 #define CONFIG_SYS_PCMCIA_IO_ADDR       (0xEC000000)
 282 #define CONFIG_SYS_PCMCIA_IO_SIZE       ( 64 << 20 )
 283
 284 /*-----------------------------------------------------------------------
 285  * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
 286  *-----------------------------------------------------------------------
 287  */
 288
 289 #define CONFIG_IDE_PREINIT      1       /* Use preinit IDE hook */
 290 #define CONFIG_IDE_8xx_PCCARD   1       /* Use IDE with PC Card Adapter */
 291
 292 #undef  CONFIG_IDE_8xx_DIRECT           /* Direct IDE    not supported  */
 293 #undef  CONFIG_IDE_LED                  /* LED   for ide not supported  */
 294 #undef  CONFIG_IDE_RESET                /* reset for ide not supported  */
 295
 296 #define CONFIG_SYS_IDE_MAXBUS           1       /* max. 1 IDE bus               */
 297 #define CONFIG_SYS_IDE_MAXDEVICE        1       /* max. 1 drive per IDE bus     */
 298
 299 #define CONFIG_SYS_ATA_IDE0_OFFSET      0x0000
 300
 301 #define CONFIG_SYS_ATA_BASE_ADDR        CONFIG_SYS_PCMCIA_MEM_ADDR
 302
 303 /* Offset for data I/O                  */
 304 #define CONFIG_SYS_ATA_DATA_OFFSET      (CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 305
 306 /* Offset for normal register accesses  */
 307 #define CONFIG_SYS_ATA_REG_OFFSET       (2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 308
 309 /* Offset for alternate registers       */
 310 #define CONFIG_SYS_ATA_ALT_OFFSET       0x0100
 311
 312 /*-----------------------------------------------------------------------
 313  *
 314  *-----------------------------------------------------------------------
 315  *
 316  */
 317 #define CONFIG_SYS_DER  0
 318
 319 /*
 320  * Init Memory Controller:
 321  *
 322  * BR0/1 and OR0/1 (FLASH)
 323  */
 324
 325 #define FLASH_BASE0_PRELIM      0x40000000      /* FLASH bank #0        */
 326 #define FLASH_BASE1_PRELIM      0x60000000      /* FLASH bank #0        */
 327
 328 /* used to re-map FLASH both when starting from SRAM or FLASH:
 329  * restrict access enough to keep SRAM working (if any)
 330  * but not too much to meddle with FLASH accesses
 331  */
 332 #define CONFIG_SYS_REMAP_OR_AM          0x80000000      /* OR addr mask */
 333 #define CONFIG_SYS_PRELIM_OR_AM 0xE0000000      /* OR addr mask */
 334
 335 /*
 336  * FLASH timing:
 337  */
 338 #define CONFIG_SYS_OR_TIMING_FLASH      (OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
 339                                  OR_SCY_3_CLK | OR_EHTR | OR_BI)
 340
 341 #define CONFIG_SYS_OR0_REMAP    (CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
 342 #define CONFIG_SYS_OR0_PRELIM   (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
 343 #define CONFIG_SYS_BR0_PRELIM   ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
 344
 345 #define CONFIG_SYS_OR1_REMAP    CONFIG_SYS_OR0_REMAP
 346 #define CONFIG_SYS_OR1_PRELIM   CONFIG_SYS_OR0_PRELIM
 347 #define CONFIG_SYS_BR1_PRELIM   ((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
 348
 349 /*
 350  * BR2/3 and OR2/3 (SDRAM)
 351  *
 352  */
 353 #define SDRAM_BASE2_PRELIM      0x00000000      /* SDRAM bank #0        */
 354 #define SDRAM_BASE3_PRELIM      0x20000000      /* SDRAM bank #1        */
 355 #define SDRAM_MAX_SIZE          0x04000000      /* max 64 MB per bank   */
 356
 357 /* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)      */
 358 #define CONFIG_SYS_OR_TIMING_SDRAM      0x00000A00
 359
 360 #define CONFIG_SYS_OR2_PRELIM   (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM )
 361 #define CONFIG_SYS_BR2_PRELIM   ((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 362
 363 #ifndef CONFIG_CAN_DRIVER
 364 #define CONFIG_SYS_OR3_PRELIM   CONFIG_SYS_OR2_PRELIM
 365 #define CONFIG_SYS_BR3_PRELIM   ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 366 #else   /* CAN uses CS3#, so we can have only one SDRAM bank anyway */
 367 #define CONFIG_SYS_CAN_BASE             0xC0000000      /* CAN mapped at 0xC0000000     */
 368 #define CONFIG_SYS_CAN_OR_AM            0xFFFF8000      /* 32 kB address mask           */
 369 #define CONFIG_SYS_OR3_CAN              (CONFIG_SYS_CAN_OR_AM | OR_G5LA | OR_BI)
 370 #define CONFIG_SYS_BR3_CAN              ((CONFIG_SYS_CAN_BASE & BR_BA_MSK) | \
 371                                         BR_PS_8 | BR_MS_UPMB | BR_V )
 372 #endif  /* CONFIG_CAN_DRIVER */
 373
 374 /*
 375  * Memory Periodic Timer Prescaler
 376  *
 377  * The Divider for PTA (refresh timer) configuration is based on an
 378  * example SDRAM configuration (64 MBit, one bank). The adjustment to
 379  * the number of chip selects (NCS) and the actually needed refresh
 380  * rate is done by setting MPTPR.
 381  *
 382  * PTA is calculated from
 383  *      PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS)
 384  *
 385  *      gclk      CPU clock (not bus clock!)
 386  *      Trefresh  Refresh cycle * 4 (four word bursts used)
 387  *
 388  * 4096  Rows from SDRAM example configuration
 389  * 1000  factor s -> ms
 390  *   32  PTP (pre-divider from MPTPR) from SDRAM example configuration
 391  *    4  Number of refresh cycles per period
 392  *   64  Refresh cycle in ms per number of rows
 393  * --------------------------------------------
 394  * Divider = 4096 * 32 * 1000 / (4 * 64) = 512000
 395  *
 396  * 50 MHz => 50.000.000 / Divider =  98
 397  * 66 Mhz => 66.000.000 / Divider = 129
 398  * 80 Mhz => 80.000.000 / Divider = 156
 399  */
 400
 401 #define CONFIG_SYS_PTA_PER_CLK  ((4096 * 32 * 1000) / (4 * 64))
 402 #define CONFIG_SYS_MAMR_PTA     98
 403
 404 /*
 405  * For 16 MBit, refresh rates could be 31.3 us
 406  * (= 64 ms / 2K = 125 / quad bursts).
 407  * For a simpler initialization, 15.6 us is used instead.
 408  *
 409  * #define CONFIG_SYS_MPTPR_2BK_2K      MPTPR_PTP_DIV32         for 2 banks
 410  * #define CONFIG_SYS_MPTPR_1BK_2K      MPTPR_PTP_DIV64         for 1 bank
 411  */
 412 #define CONFIG_SYS_MPTPR_2BK_4K MPTPR_PTP_DIV16         /* setting for 2 banks  */
 413 #define CONFIG_SYS_MPTPR_1BK_4K MPTPR_PTP_DIV32         /* setting for 1 bank   */
 414
 415 /* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit         */
 416 #define CONFIG_SYS_MPTPR_2BK_8K MPTPR_PTP_DIV8          /* setting for 2 banks  */
 417 #define CONFIG_SYS_MPTPR_1BK_8K MPTPR_PTP_DIV16         /* setting for 1 bank   */
 418
 419 /*
 420  * MAMR settings for SDRAM
 421  */
 422
 423 /* 8 column SDRAM */
 424 #define CONFIG_SYS_MAMR_8COL    ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE       |   \
 425                          MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |   \
 426                          MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 427 /* 9 column SDRAM */
 428 #define CONFIG_SYS_MAMR_9COL    ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE       |   \
 429                          MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |   \
 430                          MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 431
 432 #define CONFIG_HWCONFIG         1
 433
 434 #endif  /* __CONFIG_H */