include/configs/TQM850M.h

   1 /*
   2  * (C) Copyright 2000-2014
   3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 /*
   9  * board/config.h - configuration options, board specific
  10  */
  11
  12 #ifndef __CONFIG_H
  13 #define __CONFIG_H
  14
  15 /*
  16  * High Level Configuration Options
  17  * (easy to change)
  18  */
  19
  20 #define CONFIG_MPC850           1       /* This is a MPC850 CPU         */
  21 #define CONFIG_TQM850M          1       /* ...on a TQM8xxM module       */
  22 #define CONFIG_DISPLAY_BOARDINFO
  23
  24 #define CONFIG_SYS_TEXT_BASE    0x40000000
  25
  26 #define CONFIG_8xx_CONS_SMC1    1       /* Console is on SMC1           */
  27 #define CONFIG_SYS_SMC_RXBUFLEN 128
  28 #define CONFIG_SYS_MAXIDLE      10
  29 #define CONFIG_BAUDRATE         115200  /* console baudrate = 115kbps   */
  30
  31 #define CONFIG_BOOTCOUNT_LIMIT
  32
  33 #define CONFIG_BOOTDELAY        5       /* autoboot after 5 seconds     */
  34
  35 #define CONFIG_BOARD_TYPES      1       /* support board types          */
  36
  37 #define CONFIG_PREBOOT  "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo"
  38
  39 #undef  CONFIG_BOOTARGS
  40
  41 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
  42         "netdev=eth0\0"                                                 \
  43         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
  44                 "nfsroot=${serverip}:${rootpath}\0"                     \
  45         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
  46         "addip=setenv bootargs ${bootargs} "                            \
  47                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
  48                 ":${hostname}:${netdev}:off panic=1\0"                  \
  49         "flash_nfs=run nfsargs addip;"                                  \
  50                 "bootm ${kernel_addr}\0"                                \
  51         "flash_self=run ramargs addip;"                                 \
  52                 "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
  53         "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0"     \
  54         "rootpath=/opt/eldk/ppc_8xx\0"                                  \
  55         "hostname=TQM850M\0"                                            \
  56         "bootfile=TQM850M/uImage\0"                                     \
  57         "fdt_addr=40080000\0"                                           \
  58         "kernel_addr=400A0000\0"                                        \
  59         "ramdisk_addr=40280000\0"                                       \
  60         "u-boot=TQM850M/u-image.bin\0"                                  \
  61         "load=tftp 200000 ${u-boot}\0"                                  \
  62         "update=prot off 40000000 +${filesize};"                        \
  63                 "era 40000000 +${filesize};"                            \
  64                 "cp.b 200000 40000000 ${filesize};"                     \
  65                 "sete filesize;save\0"                                  \
  66         ""
  67 #define CONFIG_BOOTCOMMAND      "run flash_self"
  68
  69 #define CONFIG_LOADS_ECHO       1       /* echo on for serial download  */
  70 #undef  CONFIG_SYS_LOADS_BAUD_CHANGE            /* don't allow baudrate change  */
  71
  72 #undef  CONFIG_WATCHDOG                 /* watchdog disabled            */
  73
  74 #define CONFIG_STATUS_LED       1       /* Status LED enabled           */
  75
  76 #undef  CONFIG_CAN_DRIVER               /* CAN Driver support disabled  */
  77
  78 /*
  79  * BOOTP options
  80  */
  81 #define CONFIG_BOOTP_SUBNETMASK
  82 #define CONFIG_BOOTP_GATEWAY
  83 #define CONFIG_BOOTP_HOSTNAME
  84 #define CONFIG_BOOTP_BOOTPATH
  85 #define CONFIG_BOOTP_BOOTFILESIZE
  86
  87
  88 #define CONFIG_MAC_PARTITION
  89 #define CONFIG_DOS_PARTITION
  90
  91 #define CONFIG_RTC_MPC8xx               /* use internal RTC of MPC8xx   */
  92
  93 /*
  94  * Command line configuration.
  95  */
  96 #define CONFIG_CMD_ASKENV
  97 #define CONFIG_CMD_DATE
  98 #define CONFIG_CMD_DHCP
  99 #define CONFIG_CMD_EXT2
 100 #define CONFIG_CMD_IDE
 101 #define CONFIG_CMD_JFFS2
 102 #define CONFIG_CMD_SNTP
 103
 104
 105 #define CONFIG_NETCONSOLE
 106
 107
 108 /*
 109  * Miscellaneous configurable options
 110  */
 111 #define CONFIG_SYS_LONGHELP                     /* undef to save memory         */
 112
 113 #define CONFIG_CMDLINE_EDITING  1       /* add command line history     */
 114
 115 #if defined(CONFIG_CMD_KGDB)
 116 #define CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size      */
 117 #else
 118 #define CONFIG_SYS_CBSIZE               256     /* Console I/O Buffer Size      */
 119 #endif
 120 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 121 #define CONFIG_SYS_MAXARGS              16      /* max number of command args   */
 122 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size    */
 123
 124 #define CONFIG_SYS_MEMTEST_START        0x0400000       /* memtest works on     */
 125 #define CONFIG_SYS_MEMTEST_END          0x0C00000       /* 4 ... 12 MB in DRAM  */
 126
 127 #define CONFIG_SYS_LOAD_ADDR            0x100000        /* default load address */
 128
 129 /*
 130  * Low Level Configuration Settings
 131  * (address mappings, register initial values, etc.)
 132  * You should know what you are doing if you make changes here.
 133  */
 134 /*-----------------------------------------------------------------------
 135  * Internal Memory Mapped Register
 136  */
 137 #define CONFIG_SYS_IMMR         0xFFF00000
 138
 139 /*-----------------------------------------------------------------------
 140  * Definitions for initial stack pointer and data area (in DPRAM)
 141  */
 142 #define CONFIG_SYS_INIT_RAM_ADDR        CONFIG_SYS_IMMR
 143 #define CONFIG_SYS_INIT_RAM_SIZE        0x2F00  /* Size of used area in DPRAM   */
 144 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 145 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 146
 147 /*-----------------------------------------------------------------------
 148  * Start addresses for the final memory configuration
 149  * (Set up by the startup code)
 150  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
 151  */
 152 #define CONFIG_SYS_SDRAM_BASE           0x00000000
 153 #define CONFIG_SYS_FLASH_BASE           0x40000000
 154 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)     /* Reserve 256 kB for Monitor   */
 155 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
 156 #define CONFIG_SYS_MALLOC_LEN           (128 << 10)     /* Reserve 128 kB for malloc()  */
 157
 158 /*
 159  * For booting Linux, the board info and command line data
 160  * have to be in the first 8 MB of memory, since this is
 161  * the maximum mapped by the Linux kernel during initialization.
 162  */
 163 #define CONFIG_SYS_BOOTMAPSZ            (8 << 20)       /* Initial Memory map for Linux */
 164
 165 /*-----------------------------------------------------------------------
 166  * FLASH organization
 167  */
 168
 169 /* use CFI flash driver */
 170 #define CONFIG_SYS_FLASH_CFI            1       /* Flash is CFI conformant */
 171 #define CONFIG_FLASH_CFI_DRIVER 1       /* Use the common driver */
 172 #define CONFIG_SYS_FLASH_BANKS_LIST     { CONFIG_SYS_FLASH_BASE }
 173 #define CONFIG_SYS_FLASH_EMPTY_INFO
 174 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE       1
 175 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* max number of memory banks */
 176 #define CONFIG_SYS_MAX_FLASH_SECT       256     /* max number of sectors on one chip */
 177
 178 #define CONFIG_ENV_IS_IN_FLASH  1
 179 #define CONFIG_ENV_OFFSET               0x40000 /*   Offset   of Environment Sector     */
 180 #define CONFIG_ENV_SIZE         0x08000 /* Total Size of Environment            */
 181 #define CONFIG_ENV_SECT_SIZE    0x20000 /* Total Size of Environment Sector     */
 182
 183 /* Address and size of Redundant Environment Sector     */
 184 #define CONFIG_ENV_OFFSET_REDUND        (CONFIG_ENV_OFFSET+CONFIG_ENV_SECT_SIZE)
 185 #define CONFIG_ENV_SIZE_REDUND  (CONFIG_ENV_SIZE)
 186
 187 #define CONFIG_SYS_USE_PPCENV                   /* Environment embedded in sect .ppcenv */
 188
 189 #define CONFIG_MISC_INIT_R              /* Make sure to remap flashes correctly */
 190
 191 /*-----------------------------------------------------------------------
 192  * Dynamic MTD partition support
 193  */
 194 #define CONFIG_CMD_MTDPARTS
 195 #define CONFIG_MTD_DEVICE               /* needed for mtdparts commands */
 196 #define CONFIG_FLASH_CFI_MTD
 197 #define MTDIDS_DEFAULT          "nor0=TQM8xxM-0"
 198
 199 #define MTDPARTS_DEFAULT        "mtdparts=TQM8xxM-0:512k(u-boot),"      \
 200                                                 "128k(dtb),"            \
 201                                                 "1920k(kernel),"        \
 202                                                 "5632(rootfs),"         \
 203                                                 "4m(data)"
 204
 205 /*-----------------------------------------------------------------------
 206  * Hardware Information Block
 207  */
 208 #define CONFIG_SYS_HWINFO_OFFSET        0x0003FFC0      /* offset of HW Info block */
 209 #define CONFIG_SYS_HWINFO_SIZE          0x00000040      /* size   of HW Info block */
 210 #define CONFIG_SYS_HWINFO_MAGIC 0x54514D38      /* 'TQM8' */
 211
 212 /*-----------------------------------------------------------------------
 213  * Cache Configuration
 214  */
 215 #define CONFIG_SYS_CACHELINE_SIZE       16      /* For all MPC8xx CPUs                  */
 216 #if defined(CONFIG_CMD_KGDB)
 217 #define CONFIG_SYS_CACHELINE_SHIFT      4       /* log base 2 of the above value        */
 218 #endif
 219
 220 /*-----------------------------------------------------------------------
 221  * SYPCR - System Protection Control                            11-9
 222  * SYPCR can only be written once after reset!
 223  *-----------------------------------------------------------------------
 224  * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
 225  */
 226 #if defined(CONFIG_WATCHDOG)
 227 #define CONFIG_SYS_SYPCR        (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
 228                          SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
 229 #else
 230 #define CONFIG_SYS_SYPCR        (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
 231 #endif
 232
 233 /*-----------------------------------------------------------------------
 234  * SIUMCR - SIU Module Configuration                            11-6
 235  *-----------------------------------------------------------------------
 236  * PCMCIA config., multi-function pin tri-state
 237  */
 238 #ifndef CONFIG_CAN_DRIVER
 239 #define CONFIG_SYS_SIUMCR       (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 240 #else   /* we must activate GPL5 in the SIUMCR for CAN */
 241 #define CONFIG_SYS_SIUMCR       (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
 242 #endif  /* CONFIG_CAN_DRIVER */
 243
 244 /*-----------------------------------------------------------------------
 245  * TBSCR - Time Base Status and Control                         11-26
 246  *-----------------------------------------------------------------------
 247  * Clear Reference Interrupt Status, Timebase freezing enabled
 248  */
 249 #define CONFIG_SYS_TBSCR        (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
 250
 251 /*-----------------------------------------------------------------------
 252  * RTCSC - Real-Time Clock Status and Control Register          11-27
 253  *-----------------------------------------------------------------------
 254  */
 255 #define CONFIG_SYS_RTCSC        (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
 256
 257 /*-----------------------------------------------------------------------
 258  * PISCR - Periodic Interrupt Status and Control                11-31
 259  *-----------------------------------------------------------------------
 260  * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
 261  */
 262 #define CONFIG_SYS_PISCR        (PISCR_PS | PISCR_PITF)
 263
 264 /*-----------------------------------------------------------------------
 265  * PLPRCR - PLL, Low-Power, and Reset Control Register          15-30
 266  *-----------------------------------------------------------------------
 267  * Reset PLL lock status sticky bit, timer expired status bit and timer
 268  * interrupt status bit
 269  */
 270 #define CONFIG_SYS_PLPRCR       (PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
 271
 272 /*-----------------------------------------------------------------------
 273  * SCCR - System Clock and reset Control Register               15-27
 274  *-----------------------------------------------------------------------
 275  * Set clock output, timebase and RTC source and divider,
 276  * power management and some other internal clocks
 277  */
 278 #define SCCR_MASK       SCCR_EBDF11
 279 #define CONFIG_SYS_SCCR (SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
 280                          SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
 281                          SCCR_DFALCD00)
 282
 283 /*-----------------------------------------------------------------------
 284  * PCMCIA stuff
 285  *-----------------------------------------------------------------------
 286  *
 287  */
 288 #define CONFIG_SYS_PCMCIA_MEM_ADDR      (0xE0000000)
 289 #define CONFIG_SYS_PCMCIA_MEM_SIZE      ( 64 << 20 )
 290 #define CONFIG_SYS_PCMCIA_DMA_ADDR      (0xE4000000)
 291 #define CONFIG_SYS_PCMCIA_DMA_SIZE      ( 64 << 20 )
 292 #define CONFIG_SYS_PCMCIA_ATTRB_ADDR    (0xE8000000)
 293 #define CONFIG_SYS_PCMCIA_ATTRB_SIZE    ( 64 << 20 )
 294 #define CONFIG_SYS_PCMCIA_IO_ADDR       (0xEC000000)
 295 #define CONFIG_SYS_PCMCIA_IO_SIZE       ( 64 << 20 )
 296
 297 /*-----------------------------------------------------------------------
 298  * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
 299  *-----------------------------------------------------------------------
 300  */
 301
 302 #define CONFIG_IDE_PREINIT      1       /* Use preinit IDE hook */
 303 #define CONFIG_IDE_8xx_PCCARD   1       /* Use IDE with PC Card Adapter */
 304
 305 #undef  CONFIG_IDE_8xx_DIRECT           /* Direct IDE    not supported  */
 306 #undef  CONFIG_IDE_LED                  /* LED   for ide not supported  */
 307 #undef  CONFIG_IDE_RESET                /* reset for ide not supported  */
 308
 309 #define CONFIG_SYS_IDE_MAXBUS           1       /* max. 1 IDE bus               */
 310 #define CONFIG_SYS_IDE_MAXDEVICE        1       /* max. 1 drive per IDE bus     */
 311
 312 #define CONFIG_SYS_ATA_IDE0_OFFSET      0x0000
 313
 314 #define CONFIG_SYS_ATA_BASE_ADDR        CONFIG_SYS_PCMCIA_MEM_ADDR
 315
 316 /* Offset for data I/O                  */
 317 #define CONFIG_SYS_ATA_DATA_OFFSET      (CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 318
 319 /* Offset for normal register accesses  */
 320 #define CONFIG_SYS_ATA_REG_OFFSET       (2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
 321
 322 /* Offset for alternate registers       */
 323 #define CONFIG_SYS_ATA_ALT_OFFSET       0x0100
 324
 325 /*-----------------------------------------------------------------------
 326  *
 327  *-----------------------------------------------------------------------
 328  *
 329  */
 330 #define CONFIG_SYS_DER  0
 331
 332 /*
 333  * Init Memory Controller:
 334  *
 335  * BR0/1 and OR0/1 (FLASH)
 336  */
 337
 338 #define FLASH_BASE0_PRELIM      0x40000000      /* FLASH bank #0        */
 339 #define FLASH_BASE1_PRELIM      0x60000000      /* FLASH bank #0        */
 340
 341 /* used to re-map FLASH both when starting from SRAM or FLASH:
 342  * restrict access enough to keep SRAM working (if any)
 343  * but not too much to meddle with FLASH accesses
 344  */
 345 #define CONFIG_SYS_REMAP_OR_AM          0x80000000      /* OR addr mask */
 346 #define CONFIG_SYS_PRELIM_OR_AM 0xE0000000      /* OR addr mask */
 347
 348 /*
 349  * FLASH timing:
 350  */
 351 #define CONFIG_SYS_OR_TIMING_FLASH      (OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
 352                                  OR_SCY_3_CLK | OR_EHTR | OR_BI)
 353
 354 #define CONFIG_SYS_OR0_REMAP    (CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
 355 #define CONFIG_SYS_OR0_PRELIM   (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
 356 #define CONFIG_SYS_BR0_PRELIM   ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
 357
 358 #define CONFIG_SYS_OR1_REMAP    CONFIG_SYS_OR0_REMAP
 359 #define CONFIG_SYS_OR1_PRELIM   CONFIG_SYS_OR0_PRELIM
 360 #define CONFIG_SYS_BR1_PRELIM   ((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
 361
 362 /*
 363  * BR2/3 and OR2/3 (SDRAM)
 364  *
 365  */
 366 #define SDRAM_BASE2_PRELIM      0x00000000      /* SDRAM bank #0        */
 367 #define SDRAM_BASE3_PRELIM      0x20000000      /* SDRAM bank #1        */
 368 #define SDRAM_MAX_SIZE          0x04000000      /* max 64 MB per bank   */
 369
 370 /* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)      */
 371 #define CONFIG_SYS_OR_TIMING_SDRAM      0x00000A00
 372
 373 #define CONFIG_SYS_OR2_PRELIM   (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM )
 374 #define CONFIG_SYS_BR2_PRELIM   ((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 375
 376 #ifndef CONFIG_CAN_DRIVER
 377 #define CONFIG_SYS_OR3_PRELIM   CONFIG_SYS_OR2_PRELIM
 378 #define CONFIG_SYS_BR3_PRELIM   ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
 379 #else   /* CAN uses CS3#, so we can have only one SDRAM bank anyway */
 380 #define CONFIG_SYS_CAN_BASE             0xC0000000      /* CAN mapped at 0xC0000000     */
 381 #define CONFIG_SYS_CAN_OR_AM            0xFFFF8000      /* 32 kB address mask           */
 382 #define CONFIG_SYS_OR3_CAN              (CONFIG_SYS_CAN_OR_AM | OR_G5LA | OR_BI)
 383 #define CONFIG_SYS_BR3_CAN              ((CONFIG_SYS_CAN_BASE & BR_BA_MSK) | \
 384                                         BR_PS_8 | BR_MS_UPMB | BR_V )
 385 #endif  /* CONFIG_CAN_DRIVER */
 386
 387 /*
 388  * Memory Periodic Timer Prescaler
 389  *
 390  * The Divider for PTA (refresh timer) configuration is based on an
 391  * example SDRAM configuration (64 MBit, one bank). The adjustment to
 392  * the number of chip selects (NCS) and the actually needed refresh
 393  * rate is done by setting MPTPR.
 394  *
 395  * PTA is calculated from
 396  *      PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS)
 397  *
 398  *      gclk      CPU clock (not bus clock!)
 399  *      Trefresh  Refresh cycle * 4 (four word bursts used)
 400  *
 401  * 4096  Rows from SDRAM example configuration
 402  * 1000  factor s -> ms
 403  *   32  PTP (pre-divider from MPTPR) from SDRAM example configuration
 404  *    4  Number of refresh cycles per period
 405  *   64  Refresh cycle in ms per number of rows
 406  * --------------------------------------------
 407  * Divider = 4096 * 32 * 1000 / (4 * 64) = 512000
 408  *
 409  * 50 MHz => 50.000.000 / Divider =  98
 410  * 66 Mhz => 66.000.000 / Divider = 129
 411  * 80 Mhz => 80.000.000 / Divider = 156
 412  */
 413
 414 #define CONFIG_SYS_PTA_PER_CLK  ((4096 * 32 * 1000) / (4 * 64))
 415 #define CONFIG_SYS_MAMR_PTA     98
 416
 417 /*
 418  * For 16 MBit, refresh rates could be 31.3 us
 419  * (= 64 ms / 2K = 125 / quad bursts).
 420  * For a simpler initialization, 15.6 us is used instead.
 421  *
 422  * #define CONFIG_SYS_MPTPR_2BK_2K      MPTPR_PTP_DIV32         for 2 banks
 423  * #define CONFIG_SYS_MPTPR_1BK_2K      MPTPR_PTP_DIV64         for 1 bank
 424  */
 425 #define CONFIG_SYS_MPTPR_2BK_4K MPTPR_PTP_DIV16         /* setting for 2 banks  */
 426 #define CONFIG_SYS_MPTPR_1BK_4K MPTPR_PTP_DIV32         /* setting for 1 bank   */
 427
 428 /* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit         */
 429 #define CONFIG_SYS_MPTPR_2BK_8K MPTPR_PTP_DIV8          /* setting for 2 banks  */
 430 #define CONFIG_SYS_MPTPR_1BK_8K MPTPR_PTP_DIV16         /* setting for 1 bank   */
 431
 432 /*
 433  * MAMR settings for SDRAM
 434  */
 435
 436 /* 8 column SDRAM */
 437 #define CONFIG_SYS_MAMR_8COL    ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE       |   \
 438                          MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |   \
 439                          MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 440 /* 9 column SDRAM */
 441 #define CONFIG_SYS_MAMR_9COL    ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE       |   \
 442                          MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |   \
 443                          MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 444
 445 #define CONFIG_HWCONFIG         1
 446
 447 #endif  /* __CONFIG_H */