]> git.ipfire.org Git - people/ms/u-boot.git/blob - include/configs/at91sam9rlek.h
Convert CONFIG_BOOTP_BOOTPATH et al to Kconfig
[people/ms/u-boot.git] / include / configs / at91sam9rlek.h
1 /*
2 * (C) Copyright 2007-2008
3 * Stelian Pop <stelian@popies.net>
4 * Lead Tech Design <www.leadtechdesign.com>
5 *
6 * Configuation settings for the AT91SAM9RLEK board.
7 *
8 * SPDX-License-Identifier: GPL-2.0+
9 */
10
11 #ifndef __CONFIG_H
12 #define __CONFIG_H
13
14 #include <asm/hardware.h>
15
16 /* ARM asynchronous clock */
17 #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */
18 #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* main clock xtal */
19
20 #define CONFIG_AT91SAM9RLEK 1 /* It's an AT91SAM9RLEK Board */
21
22 #define CONFIG_ARCH_CPU_INIT
23 #define CONFIG_SKIP_LOWLEVEL_INIT
24
25 #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
26 #define CONFIG_SETUP_MEMORY_TAGS 1
27 #define CONFIG_INITRD_TAG 1
28
29 #define CONFIG_ATMEL_LEGACY
30
31 /*
32 * Hardware drivers
33 */
34
35 /* LCD */
36 #define LCD_BPP LCD_COLOR8
37 #define CONFIG_LCD_LOGO 1
38 #undef LCD_TEST_PATTERN
39 #define CONFIG_LCD_INFO 1
40 #define CONFIG_LCD_INFO_BELOW_LOGO 1
41 #define CONFIG_ATMEL_LCD 1
42 #define CONFIG_ATMEL_LCD_RGB565 1
43 /* Let board_init_f handle the framebuffer allocation */
44 #undef CONFIG_FB_ADDR
45
46 /* SDRAM */
47 #define CONFIG_NR_DRAM_BANKS 1
48 #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1
49 #define CONFIG_SYS_SDRAM_SIZE 0x04000000
50
51 #define CONFIG_SYS_INIT_SP_ADDR \
52 (ATMEL_BASE_SRAM + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
53
54 /* NAND flash */
55 #ifdef CONFIG_CMD_NAND
56 #define CONFIG_NAND_ATMEL
57 #define CONFIG_SYS_MAX_NAND_DEVICE 1
58 #define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3
59 #define CONFIG_SYS_NAND_DBW_8 1
60 /* our ALE is AD21 */
61 #define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
62 /* our CLE is AD22 */
63 #define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
64 #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PB6
65 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PD17
66
67 #endif
68
69 /* Ethernet - not present */
70
71 /* USB - not supported */
72
73 #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
74
75 #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
76 #define CONFIG_SYS_MEMTEST_END 0x23e00000
77
78 #ifdef CONFIG_SYS_USE_DATAFLASH
79
80 /* bootstrap + u-boot + env + linux in dataflash on CS0 */
81 #define CONFIG_ENV_OFFSET 0x4200
82 #define CONFIG_ENV_SIZE 0x4200
83 #define CONFIG_ENV_SECT_SIZE 0x210
84 #define CONFIG_ENV_SPI_MAX_HZ 15000000
85 #define CONFIG_BOOTCOMMAND "sf probe 0; " \
86 "sf read 0x22000000 0x84000 0x294000; " \
87 "bootm 0x22000000"
88
89 #elif CONFIG_SYS_USE_NANDFLASH
90
91 /* bootstrap + u-boot + env + linux in nandflash */
92 #define CONFIG_ENV_OFFSET 0x120000
93 #define CONFIG_ENV_OFFSET_REDUND 0x100000
94 #define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */
95 #define CONFIG_BOOTCOMMAND "nand read 0x22000000 0x200000 0x600000; " \
96 "nand read 0x21000000 0x180000 0x80000; " \
97 "bootz 0x22000000 - 0x21000000"
98
99 #else /* CONFIG_SYS_USE_MMC */
100
101 /* bootstrap + u-boot + env + linux in mmc */
102 #define CONFIG_ENV_SIZE 0x4000
103 #define CONFIG_BOOTCOMMAND "fatload mmc 0:1 0x21000000 at91sam9rlek.dtb; " \
104 "fatload mmc 0:1 0x22000000 zImage; " \
105 "bootz 0x22000000 - 0x21000000"
106 #endif
107
108 /*
109 * Size of malloc() pool
110 */
111 #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024, 0x1000)
112
113 #endif