include/configs/at91sam9x5ek.h

   1 /*
   2  * Copyright (C) 2012 Atmel Corporation
   3  *
   4  * Configuation settings for the AT91SAM9X5EK board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_H__
  10 #define __CONFIG_H__
  11
  12 #include <asm/hardware.h>
  13
  14 #define CONFIG_SYS_TEXT_BASE            0x26f00000
  15
  16 /* ARM asynchronous clock */
  17 #define CONFIG_SYS_AT91_SLOW_CLOCK      32768
  18 #define CONFIG_SYS_AT91_MAIN_CLOCK      12000000        /* 12 MHz crystal */
  19
  20 #define CONFIG_AT91SAM9X5EK
  21
  22 #define CONFIG_CMDLINE_TAG              /* enable passing of ATAGs */
  23 #define CONFIG_SETUP_MEMORY_TAGS
  24 #define CONFIG_INITRD_TAG
  25 #define CONFIG_SKIP_LOWLEVEL_INIT
  26
  27 /* general purpose I/O */
  28 #define CONFIG_ATMEL_LEGACY             /* required until (g)pio is fixed */
  29 #define CONFIG_AT91_GPIO
  30
  31 /* serial console */
  32 #define CONFIG_ATMEL_USART
  33 #define CONFIG_USART_BASE       ATMEL_BASE_DBGU
  34 #define CONFIG_USART_ID         ATMEL_ID_SYS
  35
  36 /* LCD */
  37 #define LCD_BPP                 LCD_COLOR16
  38 #define LCD_OUTPUT_BPP          24
  39 #define CONFIG_LCD_LOGO
  40 #define CONFIG_LCD_INFO
  41 #define CONFIG_LCD_INFO_BELOW_LOGO
  42 #define CONFIG_SYS_WHITE_ON_BLACK
  43 #define CONFIG_ATMEL_HLCD
  44 #define CONFIG_ATMEL_LCD_RGB565
  45
  46
  47 /*
  48  * BOOTP options
  49  */
  50 #define CONFIG_BOOTP_BOOTFILESIZE
  51 #define CONFIG_BOOTP_BOOTPATH
  52 #define CONFIG_BOOTP_GATEWAY
  53 #define CONFIG_BOOTP_HOSTNAME
  54
  55 /*
  56  * Command line configuration.
  57  */
  58 #define CONFIG_CMD_NAND
  59
  60 /*
  61  * define CONFIG_USB_EHCI to enable USB Hi-Speed (aka 2.0)
  62  * NB: in this case, USB 1.1 devices won't be recognized.
  63  */
  64
  65 /* SDRAM */
  66 #define CONFIG_NR_DRAM_BANKS            1
  67 #define CONFIG_SYS_SDRAM_BASE           0x20000000
  68 #define CONFIG_SYS_SDRAM_SIZE           0x08000000      /* 128 megs */
  69
  70 #define CONFIG_SYS_INIT_SP_ADDR \
  71         (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
  72
  73 /* DataFlash */
  74 #ifdef CONFIG_CMD_SF
  75 #define CONFIG_ATMEL_SPI
  76 #define CONFIG_SF_DEFAULT_SPEED         30000000
  77 #endif
  78
  79 /* NAND flash */
  80 #ifdef CONFIG_CMD_NAND
  81 #define CONFIG_NAND_ATMEL
  82 #define CONFIG_SYS_MAX_NAND_DEVICE      1
  83 #define CONFIG_SYS_NAND_BASE            0x40000000
  84 #define CONFIG_SYS_NAND_DBW_8           1
  85 /* our ALE is AD21 */
  86 #define CONFIG_SYS_NAND_MASK_ALE        (1 << 21)
  87 /* our CLE is AD22 */
  88 #define CONFIG_SYS_NAND_MASK_CLE        (1 << 22)
  89 #define CONFIG_SYS_NAND_ENABLE_PIN      AT91_PIN_PD4
  90 #define CONFIG_SYS_NAND_READY_PIN       AT91_PIN_PD5
  91
  92 /* PMECC & PMERRLOC */
  93 #define CONFIG_ATMEL_NAND_HWECC         1
  94 #define CONFIG_ATMEL_NAND_HW_PMECC      1
  95 #define CONFIG_PMECC_CAP                2
  96 #define CONFIG_PMECC_SECTOR_SIZE        512
  97
  98 #define CONFIG_CMD_NAND_TRIMFFS
  99
 100 #define CONFIG_MTD_DEVICE
 101 #define CONFIG_CMD_MTDPARTS
 102 #define CONFIG_MTD_PARTITIONS
 103 #define CONFIG_RBTREE
 104 #define CONFIG_LZO
 105 #define CONFIG_CMD_UBIFS
 106 #endif
 107
 108 /* MMC */
 109 #ifdef CONFIG_CMD_MMC
 110 #define CONFIG_GENERIC_ATMEL_MCI
 111 #endif
 112
 113 /* Ethernet */
 114 #define CONFIG_MACB
 115 #define CONFIG_RMII
 116 #define CONFIG_NET_RETRY_COUNT          20
 117 #define CONFIG_MACB_SEARCH_PHY
 118
 119 /* USB */
 120 #ifdef CONFIG_CMD_USB
 121 #ifdef CONFIG_USB_EHCI
 122 #define CONFIG_USB_EHCI_ATMEL
 123 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS      2
 124 #else
 125 #define CONFIG_USB_ATMEL
 126 #define CONFIG_USB_ATMEL_CLK_SEL_UPLL
 127 #define CONFIG_USB_OHCI_NEW
 128 #define CONFIG_SYS_USB_OHCI_CPU_INIT
 129 #define CONFIG_SYS_USB_OHCI_REGS_BASE           ATMEL_BASE_OHCI
 130 #define CONFIG_SYS_USB_OHCI_SLOT_NAME           "at91sam9x5"
 131 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS      3
 132 #endif
 133 #endif
 134
 135 #define CONFIG_SYS_LOAD_ADDR            0x22000000      /* load address */
 136
 137 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE
 138 #define CONFIG_SYS_MEMTEST_END          0x26e00000
 139
 140 #ifdef CONFIG_SYS_USE_NANDFLASH
 141 /* bootstrap + u-boot + env + linux in nandflash */
 142 #define CONFIG_ENV_IS_IN_NAND
 143 #define CONFIG_ENV_OFFSET               0xc0000
 144 #define CONFIG_ENV_OFFSET_REDUND        0x100000
 145 #define CONFIG_ENV_SIZE         0x20000         /* 1 sector = 128 kB */
 146 #define CONFIG_BOOTCOMMAND      "nand read " \
 147                                 "0x22000000 0x200000 0x300000; " \
 148                                 "bootm 0x22000000"
 149 #elif defined(CONFIG_SYS_USE_SPIFLASH)
 150 /* bootstrap + u-boot + env + linux in spi flash */
 151 #define CONFIG_ENV_IS_IN_SPI_FLASH
 152 #define CONFIG_ENV_OFFSET       0x5000
 153 #define CONFIG_ENV_SIZE         0x3000
 154 #define CONFIG_ENV_SECT_SIZE    0x1000
 155 #define CONFIG_ENV_SPI_MAX_HZ   30000000
 156 #define CONFIG_BOOTCOMMAND      "sf probe 0; " \
 157                                 "sf read 0x22000000 0x100000 0x300000; " \
 158                                 "bootm 0x22000000"
 159 #elif defined(CONFIG_SYS_USE_DATAFLASH)
 160 /* bootstrap + u-boot + env + linux in data flash */
 161 #define CONFIG_ENV_IS_IN_SPI_FLASH
 162 #define CONFIG_ENV_OFFSET       0x4200
 163 #define CONFIG_ENV_SIZE         0x4200
 164 #define CONFIG_ENV_SECT_SIZE    0x210
 165 #define CONFIG_ENV_SPI_MAX_HZ   30000000
 166 #define CONFIG_BOOTCOMMAND      "sf probe 0; " \
 167                                 "sf read 0x22000000 0x84000 0x294000; " \
 168                                 "bootm 0x22000000"
 169 #else /* CONFIG_SYS_USE_MMC */
 170 /* bootstrap + u-boot + env + linux in mmc */
 171 #define CONFIG_ENV_IS_IN_FAT
 172 #define CONFIG_FAT_WRITE
 173 #define FAT_ENV_INTERFACE       "mmc"
 174 #define FAT_ENV_FILE            "uboot.env"
 175 #define FAT_ENV_DEVICE_AND_PART "0"
 176 #define CONFIG_ENV_SIZE         0x4000
 177 #endif
 178
 179 #ifdef CONFIG_SYS_USE_MMC
 180 #define CONFIG_BOOTARGS         "mem=128M console=ttyS0,115200 " \
 181                                 "mtdparts=atmel_nand:" \
 182                                 "8M(bootstrap/uboot/kernel)ro,-(rootfs) " \
 183                                 "root=/dev/mmcblk0p2 " \
 184                                 "rw rootfstype=ext4 rootwait"
 185 #else
 186 #define CONFIG_BOOTARGS                                                 \
 187         "console=ttyS0,115200 earlyprintk "                             \
 188         "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro,"          \
 189         "256k(env),256k(env_redundant),256k(spare),"                    \
 190         "512k(dtb),6M(kernel)ro,-(rootfs) "                             \
 191         "rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs rw"
 192 #endif
 193
 194 #define CONFIG_BAUDRATE         115200
 195
 196 #define CONFIG_SYS_CBSIZE       256
 197 #define CONFIG_SYS_MAXARGS      16
 198 #define CONFIG_SYS_LONGHELP
 199 #define CONFIG_CMDLINE_EDITING
 200 #define CONFIG_AUTO_COMPLETE
 201
 202 /*
 203  * Size of malloc() pool
 204  */
 205 #define CONFIG_SYS_MALLOC_LEN           (512 * 1024 + 0x1000)
 206
 207 /* SPL */
 208 #define CONFIG_SPL_FRAMEWORK
 209 #define CONFIG_SPL_TEXT_BASE            0x300000
 210 #define CONFIG_SPL_MAX_SIZE             0x6000
 211 #define CONFIG_SPL_STACK                0x308000
 212
 213 #define CONFIG_SPL_BSS_START_ADDR       0x20000000
 214 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000
 215 #define CONFIG_SYS_SPL_MALLOC_START     0x20080000
 216 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x80000
 217
 218 #define CONFIG_SPL_BOARD_INIT
 219 #define CONFIG_SYS_MONITOR_LEN          (512 << 10)
 220
 221 #define CONFIG_SYS_MASTER_CLOCK         132096000
 222 #define CONFIG_SYS_AT91_PLLA            0x20c73f03
 223 #define CONFIG_SYS_MCKR                 0x1301
 224 #define CONFIG_SYS_MCKR_CSS             0x1302
 225
 226 #ifdef CONFIG_SYS_USE_MMC
 227 #define CONFIG_SPL_LDSCRIPT             arch/arm/mach-at91/arm926ejs/u-boot-spl.lds
 228 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION      1
 229 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME         "u-boot.img"
 230
 231 #elif CONFIG_SYS_USE_NANDFLASH
 232 #define CONFIG_SPL_NAND_DRIVERS
 233 #define CONFIG_SPL_NAND_BASE
 234 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x40000
 235 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 236 #define CONFIG_SYS_NAND_PAGE_SIZE       0x800
 237 #define CONFIG_SYS_NAND_PAGE_COUNT      64
 238 #define CONFIG_SYS_NAND_OOBSIZE         64
 239 #define CONFIG_SYS_NAND_BLOCK_SIZE      0x20000
 240 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   0x0
 241 #define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER
 242
 243 #elif CONFIG_SYS_USE_SPIFLASH
 244 #define CONFIG_SPL_SPI_LOAD
 245 #define CONFIG_SYS_SPI_U_BOOT_OFFS      0x8400
 246
 247 #endif
 248
 249 #endif