include/configs/clearfog.h

   1 /*
   2  * Copyright (C) 2015 Stefan Roese <sr@denx.de>
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef _CONFIG_CLEARFOG_H
   8 #define _CONFIG_CLEARFOG_H
   9
  10 /*
  11  * High Level Configuration Options (easy to change)
  12  */
  13
  14 #define CONFIG_DISPLAY_BOARDINFO_LATE
  15
  16 /*
  17  * TEXT_BASE needs to be below 16MiB, since this area is scrubbed
  18  * for DDR ECC byte filling in the SPL before loading the main
  19  * U-Boot into it.
  20  */
  21 #define CONFIG_SYS_TEXT_BASE    0x00800000
  22 #define CONFIG_SYS_TCLK         250000000       /* 250MHz */
  23
  24 /*
  25  * Commands configuration
  26  */
  27 #define CONFIG_SYS_NO_FLASH             /* Declare no flash (NOR/SPI) */
  28 #define CONFIG_CMD_ENV
  29 #define CONFIG_CMD_PCI
  30
  31 /* I2C */
  32 #define CONFIG_SYS_I2C
  33 #define CONFIG_SYS_I2C_MVTWSI
  34 #define CONFIG_I2C_MVTWSI_BASE0         MVEBU_TWSI_BASE
  35 #define CONFIG_SYS_I2C_SLAVE            0x0
  36 #define CONFIG_SYS_I2C_SPEED            100000
  37
  38 /* SPI NOR flash default params, used by sf commands */
  39 #define CONFIG_SF_DEFAULT_SPEED         1000000
  40 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_3
  41 #define CONFIG_SPI_FLASH_STMICRO
  42
  43 /*
  44  * SDIO/MMC Card Configuration
  45  */
  46 #define CONFIG_MMC
  47 #define CONFIG_MMC_SDMA
  48 #define CONFIG_GENERIC_MMC
  49 #define CONFIG_SDHCI
  50 #define CONFIG_MV_SDHCI
  51 #define CONFIG_SYS_MMC_BASE             MVEBU_SDIO_BASE
  52
  53 /* Partition support */
  54 #define CONFIG_DOS_PARTITION
  55 #define CONFIG_EFI_PARTITION
  56
  57 /* Additional FS support/configuration */
  58 #define CONFIG_SUPPORT_VFAT
  59
  60 /* USB/EHCI configuration */
  61 #define CONFIG_EHCI_IS_TDI
  62
  63 #define CONFIG_ENV_MIN_ENTRIES          128
  64
  65 /* Environment in MMC */
  66 #define CONFIG_ENV_IS_IN_MMC
  67 #define CONFIG_SYS_MMC_ENV_DEV          0
  68 #define CONFIG_ENV_SECT_SIZE            0x200
  69 #define CONFIG_ENV_SIZE                 0x10000
  70 /*
  71  * For SD - reserve 1 LBA for MBR + 1M for u-boot image. The MMC/eMMC
  72  * boot image starts @ LBA-0.
  73  * As result in MMC/eMMC case it will be a 1 sector gap between u-boot
  74  * image and environment
  75  */
  76 #define CONFIG_ENV_OFFSET               0xf0000
  77 #define CONFIG_ENV_ADDR                 CONFIG_ENV_OFFSET
  78
  79 #define CONFIG_PHY_MARVELL              /* there is a marvell phy */
  80 #define PHY_ANEG_TIMEOUT        8000    /* PHY needs a longer aneg time */
  81
  82 /* PCIe support */
  83 #ifndef CONFIG_SPL_BUILD
  84 #define CONFIG_PCI_MVEBU
  85 #define CONFIG_PCI_PNP
  86 #define CONFIG_PCI_SCAN_SHOW
  87 #endif
  88
  89 #define CONFIG_SYS_ALT_MEMTEST
  90
  91 /* Keep device tree and initrd in lower memory so the kernel can access them */
  92 #define CONFIG_EXTRA_ENV_SETTINGS       \
  93         "fdt_high=0x10000000\0"         \
  94         "initrd_high=0x10000000\0"
  95
  96 /* SPL */
  97 /*
  98  * Select the boot device here
  99  *
 100  * Currently supported are:
 101  * SPL_BOOT_SPI_NOR_FLASH       - Booting via SPI NOR flash
 102  * SPL_BOOT_SDIO_MMC_CARD       - Booting via SDIO/MMC card (partition 1)
 103  */
 104 #define SPL_BOOT_SPI_NOR_FLASH          1
 105 #define SPL_BOOT_SDIO_MMC_CARD          2
 106 #define CONFIG_SPL_BOOT_DEVICE          SPL_BOOT_SDIO_MMC_CARD
 107
 108 /* Defines for SPL */
 109 #define CONFIG_SPL_FRAMEWORK
 110 #define CONFIG_SPL_SIZE                 (140 << 10)
 111 #define CONFIG_SPL_TEXT_BASE            0x40000030
 112 #define CONFIG_SPL_MAX_SIZE             (CONFIG_SPL_SIZE - 0x0030)
 113
 114 #define CONFIG_SPL_BSS_START_ADDR       (0x40000000 + CONFIG_SPL_SIZE)
 115 #define CONFIG_SPL_BSS_MAX_SIZE         (16 << 10)
 116
 117 #ifdef CONFIG_SPL_BUILD
 118 #define CONFIG_SYS_MALLOC_SIMPLE
 119 #endif
 120
 121 #define CONFIG_SPL_STACK                (0x40000000 + ((192 - 16) << 10))
 122 #define CONFIG_SPL_BOOTROM_SAVE         (CONFIG_SPL_STACK + 4)
 123
 124 #if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SPI_NOR_FLASH
 125 /* SPL related SPI defines */
 126 #define CONFIG_SPL_SPI_LOAD
 127 #define CONFIG_SYS_SPI_U_BOOT_OFFS      0x20000
 128 #define CONFIG_SYS_U_BOOT_OFFS          CONFIG_SYS_SPI_U_BOOT_OFFS
 129 #endif
 130
 131 #if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SDIO_MMC_CARD
 132 /* SPL related MMC defines */
 133 #define CONFIG_SYS_MMC_U_BOOT_OFFS              (160 << 10)
 134 #define CONFIG_SYS_U_BOOT_OFFS                  CONFIG_SYS_MMC_U_BOOT_OFFS
 135 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR ((CONFIG_SYS_U_BOOT_OFFS / 512)\
 136                                                  + 1)
 137 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS      ((512 << 10) / 512) /* 512KiB */
 138 #ifdef CONFIG_SPL_BUILD
 139 #define CONFIG_FIXED_SDHCI_ALIGNED_BUFFER       0x00180000      /* in SDRAM */
 140 #endif
 141 #endif
 142
 143 /*
 144  * mv-common.h should be defined after CMD configs since it used them
 145  * to enable certain macros
 146  */
 147 #include "mv-common.h"
 148
 149 #endif /* _CONFIG_CLEARFOG_H */