include/configs/highbank.h

   1 /*
   2  * Copyright 2010-2011 Calxeda, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef __CONFIG_H
   8 #define __CONFIG_H
   9
  10 #include <config_distro_defaults.h>
  11
  12 #define CONFIG_SYS_DCACHE_OFF
  13 #define CONFIG_SYS_THUMB_BUILD
  14
  15 #define CONFIG_SYS_NO_FLASH
  16
  17 #define CONFIG_SYS_BOOTMAPSZ            (16 << 20)
  18
  19 #define CONFIG_SYS_TIMER_RATE           (150000000/256)
  20 #define CONFIG_SYS_TIMER_COUNTER        (0xFFF34000 + 0x4)
  21 #define CONFIG_SYS_TIMER_COUNTS_DOWN
  22
  23 /*
  24  * Size of malloc() pool
  25  */
  26 #define CONFIG_SYS_MALLOC_LEN           (512 * 1024)
  27
  28 #define CONFIG_PL011_SERIAL
  29 #define CONFIG_PL011_CLOCK              150000000
  30 #define CONFIG_PL01x_PORTS              { (void *)(0xFFF36000) }
  31 #define CONFIG_CONS_INDEX               0
  32
  33 #define CONFIG_BAUDRATE                 115200
  34
  35 #define CONFIG_BOOTCOUNT_LIMIT
  36 #define CONFIG_SYS_BOOTCOUNT_SINGLEWORD
  37 #define CONFIG_SYS_BOOTCOUNT_LE         /* Use little-endian accessors */
  38 #define CONFIG_SYS_BOOTCOUNT_ADDR       0xfff3cf0c
  39
  40 #define CONFIG_MISC_INIT_R
  41 #define CONFIG_LIBATA
  42 #define CONFIG_SCSI_AHCI
  43 #define CONFIG_SCSI_AHCI_PLAT
  44 #define CONFIG_SYS_SCSI_MAX_SCSI_ID     5
  45 #define CONFIG_SYS_SCSI_MAX_LUN         1
  46 #define CONFIG_SYS_SCSI_MAX_DEVICE      (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
  47                                         CONFIG_SYS_SCSI_MAX_LUN)
  48
  49 #define CONFIG_CALXEDA_XGMAC
  50
  51 /*
  52  * Command line configuration.
  53  */
  54 #define CONFIG_CMD_SCSI
  55
  56 #define CONFIG_BOOT_RETRY_TIME          -1
  57 #define CONFIG_RESET_TO_RETRY
  58
  59 /*
  60  * Miscellaneous configurable options
  61  */
  62 #define CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size */
  63 #define CONFIG_SYS_MAXARGS              16      /* max number of cmd args */
  64 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
  65 /* Print Buffer Size */
  66 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
  67                                          sizeof(CONFIG_SYS_PROMPT)+16)
  68
  69 #define CONFIG_SYS_LOAD_ADDR            0x800000
  70 #define CONFIG_SYS_64BIT_LBA
  71
  72
  73 /*-----------------------------------------------------------------------
  74  * Physical Memory Map
  75  * The DRAM is already setup, so do not touch the DT node later.
  76  */
  77 #define CONFIG_NR_DRAM_BANKS            0
  78 #define PHYS_SDRAM_1_SIZE               (4089 << 20)
  79 #define CONFIG_SYS_MEMTEST_START        0x100000
  80 #define CONFIG_SYS_MEMTEST_END          (PHYS_SDRAM_1_SIZE - 0x100000)
  81
  82 /* Environment data setup
  83 */
  84 #define CONFIG_ENV_IS_IN_NVRAM
  85 #define CONFIG_SYS_NVRAM_BASE_ADDR      0xfff88000      /* NVRAM base address */
  86 #define CONFIG_SYS_NVRAM_SIZE           0x8000          /* NVRAM size */
  87 #define CONFIG_ENV_SIZE                 0x2000          /* Size of Environ */
  88 #define CONFIG_ENV_ADDR                 CONFIG_SYS_NVRAM_BASE_ADDR
  89
  90 #define CONFIG_SYS_SDRAM_BASE           0x00000000
  91 #define CONFIG_SYS_TEXT_BASE            0x00008000
  92 #define CONFIG_SYS_INIT_SP_ADDR         0x01000000
  93 #define CONFIG_SKIP_LOWLEVEL_INIT
  94
  95 #endif