include/configs/km/km_arm.h

   1 /*
   2  * (C) Copyright 2009
   3  * Marvell Semiconductor <www.marvell.com>
   4  * Prafulla Wadaskar <prafulla@marvell.com>
   5  *
   6  * (C) Copyright 2009
   7  * Stefan Roese, DENX Software Engineering, sr@denx.de.
   8  *
   9  * (C) Copyright 2010-2011
  10  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
  11  *
  12  * SPDX-License-Identifier:     GPL-2.0+
  13  */
  14
  15 /*
  16  * for linking errors see
  17  * http://lists.denx.de/pipermail/u-boot/2009-July/057350.html
  18  */
  19
  20 #ifndef _CONFIG_KM_ARM_H
  21 #define _CONFIG_KM_ARM_H
  22
  23 /*
  24  * High Level Configuration Options (easy to change)
  25  */
  26 #define CONFIG_MARVELL
  27 #define CONFIG_FEROCEON_88FR131         /* CPU Core subversion */
  28 #define CONFIG_KW88F6281                /* SOC Name */
  29 #define CONFIG_MACH_KM_KIRKWOOD         /* Machine type */
  30
  31 #define CONFIG_MACH_TYPE        MACH_TYPE_KM_KIRKWOOD
  32
  33 #define CONFIG_NAND_ECC_BCH
  34 #define CONFIG_BCH
  35
  36 /* include common defines/options for all Keymile boards */
  37 #include "keymile-common.h"
  38
  39 #define CONFIG_CMD_NAND
  40
  41 /* SPI NOR Flash default params, used by sf commands */
  42 #define CONFIG_SF_DEFAULT_SPEED         8100000
  43 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_3
  44
  45 #if defined CONFIG_KM_ENV_IS_IN_SPI_NOR
  46 #define CONFIG_ENV_SPI_BUS              0
  47 #define CONFIG_ENV_SPI_CS               0
  48 #define CONFIG_ENV_SPI_MAX_HZ           8100000
  49 #define CONFIG_ENV_SPI_MODE             SPI_MODE_3
  50 #endif
  51
  52 /* Reserve 4 MB for malloc */
  53 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
  54
  55 #include "asm/arch/config.h"
  56
  57 #define CONFIG_SYS_TEXT_BASE    0x07d00000      /* code address before reloc */
  58 #define CONFIG_SYS_MEMTEST_START 0x00400000     /* 4M */
  59 #define CONFIG_SYS_MEMTEST_END  0x007fffff      /*(_8M -1) */
  60 #define CONFIG_SYS_LOAD_ADDR    0x00800000      /* default load adr- 8M */
  61
  62 /* pseudo-non volatile RAM [hex] */
  63 #define CONFIG_KM_PNVRAM        0x80000
  64 /* physical RAM MTD size [hex] */
  65 #define CONFIG_KM_PHRAM         0x17F000
  66
  67 #define CONFIG_KM_CRAMFS_ADDR   0x2400000
  68 #define CONFIG_KM_KERNEL_ADDR   0x2000000       /* 3098KBytes */
  69 #define CONFIG_KM_FDT_ADDR      0x23E0000       /*  128KBytes */
  70
  71 /* architecture specific default bootargs */
  72 #define CONFIG_KM_DEF_BOOT_ARGS_CPU                                     \
  73                 "bootcountaddr=${bootcountaddr} ${mtdparts}"            \
  74                 " boardid=0x${IVM_BoardId} hwkey=0x${IVM_HWKey}"
  75
  76 #define CONFIG_KM_DEF_ENV_CPU                                           \
  77         "u-boot="__stringify(CONFIG_HOSTNAME) "/u-boot.kwb\0"           \
  78         CONFIG_KM_UPDATE_UBOOT                                          \
  79         "set_fdthigh=setenv fdt_high ${kernelmem}\0"                    \
  80         "checkfdt="                                                     \
  81                 "if cramfsls fdt_0x${IVM_BoardId}_0x${IVM_HWKey}.dtb; " \
  82                 "then true; else setenv cramfsloadfdt true; "           \
  83                 "setenv boot bootm ${load_addr_r}; "                    \
  84                 "echo No FDT found, booting with the kernel "           \
  85                 "appended one; fi\0"                                    \
  86         ""
  87
  88 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  89 #define CONFIG_MISC_INIT_R
  90
  91 /*
  92  * NS16550 Configuration
  93  */
  94 #define CONFIG_SYS_NS16550_SERIAL
  95 #define CONFIG_SYS_NS16550_REG_SIZE     (-4)
  96 #define CONFIG_SYS_NS16550_CLK          CONFIG_SYS_TCLK
  97 #define CONFIG_SYS_NS16550_COM1         KW_UART0_BASE
  98 #define CONFIG_SYS_NS16550_COM2         KW_UART1_BASE
  99
 100 /*
 101  * Serial Port configuration
 102  * The following definitions let you select what serial you want to use
 103  * for your console driver.
 104  */
 105
 106 #define CONFIG_CONS_INDEX       1       /* Console on UART0 */
 107
 108 /*
 109  * For booting Linux, the board info and command line data
 110  * have to be in the first 8 MB of memory, since this is
 111  * the maximum mapped by the Linux kernel during initialization.
 112  */
 113 #define CONFIG_BOOTMAPSZ        (8 << 20)       /* Initial Memmap for Linux */
 114 #define CONFIG_CMDLINE_TAG              /* enable passing of ATAGs  */
 115 #define CONFIG_INITRD_TAG               /* enable INITRD tag */
 116 #define CONFIG_SETUP_MEMORY_TAGS        /* enable memory tag */
 117
 118 /*
 119  * Commands configuration
 120  */
 121 #define CONFIG_CMD_MTDPARTS
 122
 123 /*
 124  * Without NOR FLASH we need this
 125  */
 126 #define CONFIG_SYS_NO_FLASH
 127
 128 /*
 129  * NAND Flash configuration
 130  */
 131 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 132
 133 #define BOOTFLASH_START         0x0
 134
 135 /* Kirkwood has two serial IF */
 136 #if (CONFIG_CONS_INDEX == 2)
 137 #define CONFIG_KM_CONSOLE_TTY   "ttyS1"
 138 #else
 139 #define CONFIG_KM_CONSOLE_TTY   "ttyS0"
 140 #endif
 141
 142 /*
 143  * Other required minimal configurations
 144  */
 145 #define CONFIG_ARCH_CPU_INIT            /* call arch_cpu_init() */
 146 #define CONFIG_NR_DRAM_BANKS    4
 147 #define CONFIG_SYS_RESET_ADDRESS 0xffff0000     /* Rst Vector Adr */
 148
 149 /*
 150  * Ethernet Driver configuration
 151  */
 152 #define CONFIG_NETCONSOLE       /* include NetConsole support   */
 153 #define CONFIG_MII              /* expose smi ove miiphy interface */
 154 #define CONFIG_MVGBE            /* Enable Marvell Gbe Controller Driver */
 155 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */
 156 #define CONFIG_MVGBE_PORTS      {1, 0}  /* enable port 0 only */
 157 #define CONFIG_PHY_BASE_ADR     0
 158 #define CONFIG_ENV_OVERWRITE    /* ethaddr can be reprogrammed */
 159 #define CONFIG_KM_COMMON_ETH_INIT /* standard km ethernet_present for piggy */
 160
 161 /*
 162  * UBI related stuff
 163  */
 164 #define CONFIG_SYS_USE_UBI
 165
 166 /*
 167  * I2C related stuff
 168  */
 169 #undef CONFIG_I2C_MVTWSI
 170 #define CONFIG_SYS_I2C
 171 #define CONFIG_SYS_I2C_SOFT     /* I2C bit-banged       */
 172 #define CONFIG_SYS_I2C_INIT_BOARD
 173
 174 #define CONFIG_KIRKWOOD_GPIO            /* Enable GPIO Support */
 175 #define CONFIG_SYS_NUM_I2C_BUSES        6
 176 #define CONFIG_SYS_I2C_MAX_HOPS         1
 177 #define CONFIG_SYS_I2C_BUSES    {       {0, {I2C_NULL_HOP} }, \
 178                                         {0, {{I2C_MUX_PCA9547, 0x70, 1} } }, \
 179                                         {0, {{I2C_MUX_PCA9547, 0x70, 2} } }, \
 180                                         {0, {{I2C_MUX_PCA9547, 0x70, 3} } }, \
 181                                         {0, {{I2C_MUX_PCA9547, 0x70, 4} } }, \
 182                                         {0, {{I2C_MUX_PCA9547, 0x70, 5} } }, \
 183                                 }
 184
 185 #ifndef __ASSEMBLY__
 186 #include <asm/arch/gpio.h>
 187 extern void __set_direction(unsigned pin, int high);
 188 void set_sda(int state);
 189 void set_scl(int state);
 190 int get_sda(void);
 191 int get_scl(void);
 192 #define KM_KIRKWOOD_SDA_PIN     8
 193 #define KM_KIRKWOOD_SCL_PIN     9
 194 #define KM_KIRKWOOD_SOFT_I2C_GPIOS      0x0300
 195 #define KM_KIRKWOOD_ENV_WP      38
 196
 197 #define I2C_ACTIVE      __set_direction(KM_KIRKWOOD_SDA_PIN, 0)
 198 #define I2C_TRISTATE    __set_direction(KM_KIRKWOOD_SDA_PIN, 1)
 199 #define I2C_READ        (kw_gpio_get_value(KM_KIRKWOOD_SDA_PIN) ? 1 : 0)
 200 #define I2C_SDA(bit)    kw_gpio_set_value(KM_KIRKWOOD_SDA_PIN, bit)
 201 #define I2C_SCL(bit)    kw_gpio_set_value(KM_KIRKWOOD_SCL_PIN, bit)
 202 #endif
 203
 204 #define I2C_DELAY       udelay(1)
 205 #define I2C_SOFT_DECLARATIONS
 206
 207 #define CONFIG_SYS_I2C_SOFT_SLAVE       0x0
 208 #define CONFIG_SYS_I2C_SOFT_SPEED       100000
 209
 210 /* EEprom support 24C128, 24C256 valid for environment eeprom */
 211 #define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE
 212 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       6 /* 64 Byte write page */
 213 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   10
 214
 215 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50
 216 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN  2
 217
 218 /*
 219  *  Environment variables configurations
 220  */
 221 #if defined CONFIG_KM_ENV_IS_IN_SPI_NOR
 222 #define CONFIG_ENV_IS_IN_SPI_FLASH  /* use SPI-Flash for environment vars */
 223 #define CONFIG_ENV_OFFSET               0xc0000     /* no bracets! */
 224 #define CONFIG_ENV_SIZE                 0x02000     /* Size of Environment */
 225 #define CONFIG_ENV_SECT_SIZE            0x10000
 226 #define CONFIG_ENV_OFFSET_REDUND        (CONFIG_ENV_OFFSET + \
 227                                         CONFIG_ENV_SECT_SIZE)
 228 #define CONFIG_ENV_TOTAL_SIZE           0x20000     /* no bracets! */
 229 #else
 230 #define CONFIG_ENV_IS_IN_EEPROM         /* use EEPROM for environment vars */
 231 #define CONFIG_SYS_DEF_EEPROM_ADDR      0x50
 232 #define CONFIG_ENV_EEPROM_IS_ON_I2C
 233 #define CONFIG_SYS_EEPROM_WREN
 234 #define CONFIG_ENV_OFFSET               0x0 /* no bracets! */
 235 #define CONFIG_ENV_SIZE                 (0x2000 - CONFIG_ENV_OFFSET)
 236 #define CONFIG_I2C_ENV_EEPROM_BUS 5 /* I2C2 (Mux-Port 5) */
 237 #define CONFIG_ENV_OFFSET_REDUND        0x2000 /* no bracets! */
 238 #define CONFIG_ENV_SIZE_REDUND          (CONFIG_ENV_SIZE)
 239 #endif
 240
 241 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
 242
 243
 244 /* SPI bus claim MPP configuration */
 245 #define CONFIG_SYS_KW_SPI_MPP   0x0
 246
 247 #define FLASH_GPIO_PIN                  0x00010000
 248 #define KM_FLASH_GPIO_PIN       16
 249
 250 #ifndef MTDIDS_DEFAULT
 251 # define MTDIDS_DEFAULT         "nand0=orion_nand"
 252 #endif /* MTDIDS_DEFAULT */
 253
 254 #ifndef MTDPARTS_DEFAULT
 255 # define MTDPARTS_DEFAULT       "mtdparts="                     \
 256         "orion_nand:"                                           \
 257                 "-(" CONFIG_KM_UBI_PARTITION_NAME_BOOT ");"
 258 #endif /* MTDPARTS_DEFAULT */
 259
 260 #define CONFIG_KM_UPDATE_UBOOT                                          \
 261         "update="                                                       \
 262                 "sf probe 0;sf erase 0 +${filesize};"                   \
 263                 "sf write ${load_addr_r} 0 ${filesize};\0"
 264
 265 #if defined CONFIG_KM_ENV_IS_IN_SPI_NOR
 266 #define CONFIG_KM_NEW_ENV                                               \
 267         "newenv=sf probe 0;"                                            \
 268                 "sf erase " __stringify(CONFIG_ENV_OFFSET) " "          \
 269                 __stringify(CONFIG_ENV_TOTAL_SIZE)"\0"
 270 #else
 271 #define CONFIG_KM_NEW_ENV                                               \
 272         "newenv=setenv addr 0x100000 && "                               \
 273                 "i2c dev " __stringify(CONFIG_I2C_ENV_EEPROM_BUS) "; "  \
 274                 "mw.b ${addr} 0 4 && "                                  \
 275                 "eeprom write " __stringify(CONFIG_SYS_DEF_EEPROM_ADDR) \
 276                 " ${addr} " __stringify(CONFIG_ENV_OFFSET) " 4 && "     \
 277                 "eeprom write " __stringify(CONFIG_SYS_DEF_EEPROM_ADDR) \
 278                 " ${addr} " __stringify(CONFIG_ENV_OFFSET_REDUND) " 4\0"
 279 #endif
 280
 281 #ifndef CONFIG_KM_BOARD_EXTRA_ENV
 282 #define CONFIG_KM_BOARD_EXTRA_ENV       ""
 283 #endif
 284
 285 /*
 286  * Default environment variables
 287  */
 288 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 289         CONFIG_KM_BOARD_EXTRA_ENV                                       \
 290         CONFIG_KM_DEF_ENV                                               \
 291         CONFIG_KM_NEW_ENV                                               \
 292         "arch=arm\0"                                                    \
 293         ""
 294
 295 #if defined(CONFIG_SYS_NO_FLASH)
 296 #undef  CONFIG_FLASH_CFI_MTD
 297 #undef  CONFIG_JFFS2_CMDLINE
 298 #endif
 299
 300 /* additions for new relocation code, must be added to all boards */
 301 #define CONFIG_SYS_SDRAM_BASE           0x00000000
 302 /* Do early setups now in board_init_f() */
 303
 304 /*
 305  * resereved pram area at the end of memroy [hex]
 306  * 8Mbytes for switch + 4Kbytes for bootcount
 307  */
 308 #define CONFIG_KM_RESERVED_PRAM 0x801000
 309 /* address for the bootcount (taken from end of RAM) */
 310 #define BOOTCOUNT_ADDR          (CONFIG_KM_RESERVED_PRAM)
 311 /* Use generic bootcount RAM driver */
 312 #define CONFIG_BOOTCOUNT_RAM
 313
 314 /* enable POST tests */
 315 #define CONFIG_POST     (CONFIG_SYS_POST_MEM_REGIONS)
 316 #define CONFIG_POST_SKIP_ENV_FLAGS
 317 #define CONFIG_POST_EXTERNAL_WORD_FUNCS
 318 #define CONFIG_CMD_DIAG
 319
 320 /* we do the whole PCIe FPGA config stuff here */
 321
 322 #endif /* _CONFIG_KM_ARM_H */