include/configs/ls1043a_common.h

   1 /*
   2  * Copyright (C) 2015 Freescale Semiconductor
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef __LS1043A_COMMON_H
   8 #define __LS1043A_COMMON_H
   9
  10 #define CONFIG_REMAKE_ELF
  11 #define CONFIG_FSL_LAYERSCAPE
  12 #define CONFIG_LS1043A
  13 #define CONFIG_MP
  14 #define CONFIG_GICV2
  15
  16 #include <asm/arch/config.h>
  17
  18 /* Link Definitions */
  19 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
  20
  21 #define CONFIG_SUPPORT_RAW_INITRD
  22
  23 #define CONFIG_SKIP_LOWLEVEL_INIT
  24
  25 #define CONFIG_VERY_BIG_RAM
  26 #define CONFIG_SYS_DDR_SDRAM_BASE       0x80000000
  27 #define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY       0
  28 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  29 #define CONFIG_SYS_DDR_BLOCK2_BASE      0x880000000ULL
  30
  31 #define CPU_RELEASE_ADDR               secondary_boot_func
  32
  33 /* Generic Timer Definitions */
  34 #define COUNTER_FREQUENCY               25000000        /* 25MHz */
  35
  36 /* Size of malloc() pool */
  37 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 1024 * 1024)
  38
  39 /* Serial Port */
  40 #define CONFIG_CONS_INDEX               1
  41 #define CONFIG_SYS_NS16550_SERIAL
  42 #define CONFIG_SYS_NS16550_REG_SIZE     1
  43 #define CONFIG_SYS_NS16550_CLK          (get_serial_clock())
  44
  45 #define CONFIG_BAUDRATE                 115200
  46 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 19200, 38400, 57600, 115200 }
  47
  48 /* SD boot SPL */
  49 #ifdef CONFIG_SD_BOOT
  50 #define CONFIG_SPL_FRAMEWORK
  51 #define CONFIG_SPL_LDSCRIPT             "arch/arm/cpu/armv8/u-boot-spl.lds"
  52 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  53
  54 #define CONFIG_SPL_TEXT_BASE            0x10000000
  55 #define CONFIG_SPL_MAX_SIZE             0x1d000
  56 #define CONFIG_SPL_STACK                0x1001e000
  57 #define CONFIG_SPL_PAD_TO               0x1d000
  58
  59 #define CONFIG_SYS_SPL_MALLOC_START     (CONFIG_SYS_TEXT_BASE + \
  60                                         CONFIG_SYS_MONITOR_LEN)
  61 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000
  62 #define CONFIG_SPL_BSS_START_ADDR       0x80100000
  63 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000
  64 #define CONFIG_SYS_MONITOR_LEN          0xa0000
  65 #endif
  66
  67 /* NAND SPL */
  68 #ifdef CONFIG_NAND_BOOT
  69 #define CONFIG_SPL_PBL_PAD
  70 #define CONFIG_SPL_FRAMEWORK
  71 #define CONFIG_SPL_LDSCRIPT             "arch/arm/cpu/armv8/u-boot-spl.lds"
  72 #define CONFIG_SPL_TARGET               "u-boot-with-spl.bin"
  73 #define CONFIG_SPL_TEXT_BASE            0x10000000
  74 #define CONFIG_SPL_MAX_SIZE             0x1a000
  75 #define CONFIG_SPL_STACK                0x1001d000
  76 #define CONFIG_SYS_NAND_U_BOOT_DST      CONFIG_SYS_TEXT_BASE
  77 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
  78 #define CONFIG_SYS_SPL_MALLOC_START     0x80200000
  79 #define CONFIG_SPL_BSS_START_ADDR       0x80100000
  80 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000
  81 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000
  82 #define CONFIG_SYS_MONITOR_LEN          0xa0000
  83 #endif
  84
  85 /* IFC */
  86 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
  87 #define CONFIG_FSL_IFC
  88 /*
  89  * CONFIG_SYS_FLASH_BASE has the final address (core view)
  90  * CONFIG_SYS_FLASH_BASE_PHYS has the final address (IFC view)
  91  * CONFIG_SYS_FLASH_BASE_PHYS_EARLY has the temporary IFC address
  92  * CONFIG_SYS_TEXT_BASE is linked to 0x60000000 for booting
  93  */
  94 #define CONFIG_SYS_FLASH_BASE                   0x60000000
  95 #define CONFIG_SYS_FLASH_BASE_PHYS              CONFIG_SYS_FLASH_BASE
  96 #define CONFIG_SYS_FLASH_BASE_PHYS_EARLY        0x00000000
  97
  98 #ifdef CONFIG_MTD_NOR_FLASH
  99 #define CONFIG_FLASH_CFI_DRIVER
 100 #define CONFIG_SYS_FLASH_CFI
 101 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 102 #define CONFIG_SYS_FLASH_QUIET_TEST
 103 #define CONFIG_FLASH_SHOW_PROGRESS      45      /* count down from 45/5: 9..1 */
 104 #endif
 105 #endif
 106
 107 /* I2C */
 108 #define CONFIG_SYS_I2C
 109 #define CONFIG_SYS_I2C_MXC
 110 #define CONFIG_SYS_I2C_MXC_I2C1
 111 #define CONFIG_SYS_I2C_MXC_I2C2
 112 #define CONFIG_SYS_I2C_MXC_I2C3
 113 #define CONFIG_SYS_I2C_MXC_I2C4
 114
 115 /* PCIe */
 116 #define CONFIG_PCIE1            /* PCIE controller 1 */
 117 #define CONFIG_PCIE2            /* PCIE controller 2 */
 118 #define CONFIG_PCIE3            /* PCIE controller 3 */
 119
 120 #ifdef CONFIG_PCI
 121 #define CONFIG_NET_MULTI
 122 #define CONFIG_PCI_SCAN_SHOW
 123 #define CONFIG_CMD_PCI
 124 #endif
 125
 126 /* Command line configuration */
 127 #define CONFIG_CMD_ENV
 128
 129 /*  MMC  */
 130 #ifdef CONFIG_MMC
 131 #define CONFIG_FSL_ESDHC
 132 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33
 133 #endif
 134
 135 /*  DSPI  */
 136 #define CONFIG_FSL_DSPI
 137 #ifdef CONFIG_FSL_DSPI
 138 #define CONFIG_DM_SPI_FLASH
 139 #define CONFIG_SPI_FLASH_STMICRO        /* cs0 */
 140 #define CONFIG_SPI_FLASH_SST            /* cs1 */
 141 #define CONFIG_SPI_FLASH_EON            /* cs2 */
 142 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
 143 #define CONFIG_SF_DEFAULT_BUS           1
 144 #define CONFIG_SF_DEFAULT_CS            0
 145 #endif
 146 #endif
 147
 148 #define CONFIG_FSL_CAAM                 /* Enable SEC/CAAM */
 149
 150 /* FMan ucode */
 151 #define CONFIG_SYS_DPAA_FMAN
 152 #ifdef CONFIG_SYS_DPAA_FMAN
 153 #define CONFIG_SYS_FM_MURAM_SIZE        0x60000
 154
 155 #ifdef CONFIG_NAND_BOOT
 156 /* Store Fman ucode at offeset 0x160000(11 blocks). */
 157 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND
 158 #define CONFIG_SYS_FMAN_FW_ADDR         (11 * CONFIG_SYS_NAND_BLOCK_SIZE)
 159 #elif defined(CONFIG_SD_BOOT)
 160 /*
 161  * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
 162  * about 1MB (2040 blocks), Env is stored after the image, and the env size is
 163  * 0x2000 (16 blocks), 8 + 2040 + 16 = 2064, enlarge it to 2080(0x820).
 164  */
 165 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC
 166 #define CONFIG_SYS_FMAN_FW_ADDR         (512 * 0x820)
 167 #elif defined(CONFIG_QSPI_BOOT)
 168 #define CONFIG_SYS_QE_FW_IN_SPIFLASH
 169 #define CONFIG_SYS_FMAN_FW_ADDR         0x400d0000
 170 #define CONFIG_ENV_SPI_BUS              0
 171 #define CONFIG_ENV_SPI_CS               0
 172 #define CONFIG_ENV_SPI_MAX_HZ           1000000
 173 #define CONFIG_ENV_SPI_MODE             0x03
 174 #else
 175 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR
 176 /* FMan fireware Pre-load address */
 177 #define CONFIG_SYS_FMAN_FW_ADDR         0x60300000
 178 #endif
 179 #define CONFIG_SYS_QE_FMAN_FW_LENGTH    0x10000
 180 #define CONFIG_SYS_FDT_PAD              (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
 181 #endif
 182
 183 /* Miscellaneous configurable options */
 184 #define CONFIG_SYS_LOAD_ADDR    (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
 185
 186 #define CONFIG_HWCONFIG
 187 #define HWCONFIG_BUFFER_SIZE            128
 188
 189 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 190 #define MTDPARTS_DEFAULT "mtdparts=spi0.0:1m(uboot)," \
 191                         "5m(kernel),1m(dtb),9m(file_system)"
 192 #else
 193 #define MTDPARTS_DEFAULT "mtdparts=60000000.nor:1m(nor_bank0_rcw)," \
 194                         "1m(nor_bank0_uboot),1m(nor_bank0_uboot_env)," \
 195                         "1m(nor_bank0_fman_uconde),40m(nor_bank0_fit)," \
 196                         "1m(nor_bank4_rcw),1m(nor_bank4_uboot)," \
 197                         "1m(nor_bank4_uboot_env),1m(nor_bank4_fman_ucode)," \
 198                         "40m(nor_bank4_fit);7e800000.flash:" \
 199                         "1m(nand_uboot),1m(nand_uboot_env)," \
 200                         "20m(nand_fit);spi0.0:1m(uboot)," \
 201                         "5m(kernel),1m(dtb),9m(file_system)"
 202 #endif
 203
 204 /* Initial environment variables */
 205 #define CONFIG_EXTRA_ENV_SETTINGS               \
 206         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
 207         "loadaddr=0x80100000\0"                 \
 208         "fdt_high=0xffffffffffffffff\0"         \
 209         "initrd_high=0xffffffffffffffff\0"      \
 210         "kernel_start=0x61100000\0"             \
 211         "kernel_load=0xa0000000\0"              \
 212         "kernel_size=0x2800000\0"               \
 213         "console=ttyS0,115200\0"                \
 214         "mtdparts=" MTDPARTS_DEFAULT "\0"
 215
 216 #define CONFIG_BOOTARGS                 "console=ttyS0,115200 root=/dev/ram0 " \
 217                                         "earlycon=uart8250,mmio,0x21c0500 "    \
 218                                         MTDPARTS_DEFAULT
 219
 220 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 221 #define CONFIG_BOOTCOMMAND              "sf probe && sf read $kernel_load "    \
 222                                         "e0000 f00000 && bootm $kernel_load"
 223 #else
 224 #define CONFIG_BOOTCOMMAND              "cp.b $kernel_start $kernel_load "     \
 225                                         "$kernel_size && bootm $kernel_load"
 226 #endif
 227
 228 /* Monitor Command Prompt */
 229 #define CONFIG_SYS_CBSIZE               512     /* Console I/O Buffer Size */
 230 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
 231                                         sizeof(CONFIG_SYS_PROMPT) + 16)
 232 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE /* Boot args buffer */
 233 #define CONFIG_SYS_LONGHELP
 234 #define CONFIG_CMDLINE_EDITING          1
 235 #define CONFIG_AUTO_COMPLETE
 236 #define CONFIG_SYS_MAXARGS              64      /* max command args */
 237
 238 #define CONFIG_SYS_BOOTM_LEN   (64 << 20)      /* Increase max gunzip size */
 239
 240 /* Hash command with SHA acceleration supported in hardware */
 241 #ifdef CONFIG_FSL_CAAM
 242 #define CONFIG_CMD_HASH
 243 #define CONFIG_SHA_HW_ACCEL
 244 #endif
 245
 246 #endif /* __LS1043A_COMMON_H */