include/configs/ls1043aqds.h

   1 /*
   2  * Copyright 2015 Freescale Semiconductor, Inc.
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef __LS1043AQDS_H__
   8 #define __LS1043AQDS_H__
   9
  10 #include "ls1043a_common.h"
  11
  12 #define CONFIG_DISPLAY_CPUINFO
  13 #ifdef CONFIG_QSPI_BOOT
  14 #define CONFIG_DISPLAY_BOARDINFO_LATE
  15 #else
  16 #define CONFIG_DISPLAY_BOARDINFO
  17 #endif
  18
  19 #if defined(CONFIG_NAND_BOOT) || defined(CONFIG_SD_BOOT)
  20 #define CONFIG_SYS_TEXT_BASE            0x82000000
  21 #elif defined(CONFIG_QSPI_BOOT)
  22 #define CONFIG_SYS_TEXT_BASE            0x40010000
  23 #else
  24 #define CONFIG_SYS_TEXT_BASE            0x60100000
  25 #endif
  26
  27 #ifndef __ASSEMBLY__
  28 unsigned long get_board_sys_clk(void);
  29 unsigned long get_board_ddr_clk(void);
  30 #endif
  31
  32 #define CONFIG_SYS_CLK_FREQ             100000000
  33 #define CONFIG_DDR_CLK_FREQ             100000000
  34
  35 #define CONFIG_SKIP_LOWLEVEL_INIT
  36
  37 #define CONFIG_LAYERSCAPE_NS_ACCESS
  38
  39 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
  40 /* Physical Memory Map */
  41 #define CONFIG_CHIP_SELECTS_PER_CTRL    4
  42 #define CONFIG_NR_DRAM_BANKS            2
  43
  44 #define CONFIG_DDR_SPD
  45 #define SPD_EEPROM_ADDRESS              0x51
  46 #define CONFIG_SYS_SPD_BUS_NUM          0
  47
  48 #define CONFIG_FSL_DDR_INTERACTIVE      /* Interactive debugging */
  49 #ifndef CONFIG_SYS_FSL_DDR4
  50 #define CONFIG_SYS_FSL_DDR3             /* Use DDR3 memory */
  51 #endif
  52
  53 #define CONFIG_DDR_ECC
  54 #ifdef CONFIG_DDR_ECC
  55 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
  56 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
  57 #endif
  58
  59 #define CONFIG_SYS_HAS_SERDES
  60
  61 #ifdef CONFIG_SYS_DPAA_FMAN
  62 #define CONFIG_FMAN_ENET
  63 #define CONFIG_PHYLIB
  64 #define CONFIG_PHY_VITESSE
  65 #define CONFIG_PHY_REALTEK
  66 #define CONFIG_PHYLIB_10G
  67 #define RGMII_PHY1_ADDR         0x1
  68 #define RGMII_PHY2_ADDR         0x2
  69 #define SGMII_CARD_PORT1_PHY_ADDR 0x1C
  70 #define SGMII_CARD_PORT2_PHY_ADDR 0x1D
  71 #define SGMII_CARD_PORT3_PHY_ADDR 0x1E
  72 #define SGMII_CARD_PORT4_PHY_ADDR 0x1F
  73 /* PHY address on QSGMII riser card on slot 1 */
  74 #define QSGMII_CARD_PORT1_PHY_ADDR_S1 0x4
  75 #define QSGMII_CARD_PORT2_PHY_ADDR_S1 0x5
  76 #define QSGMII_CARD_PORT3_PHY_ADDR_S1 0x6
  77 #define QSGMII_CARD_PORT4_PHY_ADDR_S1 0x7
  78 /* PHY address on QSGMII riser card on slot 2 */
  79 #define QSGMII_CARD_PORT1_PHY_ADDR_S2 0x8
  80 #define QSGMII_CARD_PORT2_PHY_ADDR_S2 0x9
  81 #define QSGMII_CARD_PORT3_PHY_ADDR_S2 0xA
  82 #define QSGMII_CARD_PORT4_PHY_ADDR_S2 0xB
  83 #endif
  84
  85 #ifdef CONFIG_RAMBOOT_PBL
  86 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/ls1043aqds/ls1043aqds_pbi.cfg
  87 #endif
  88
  89 #ifdef CONFIG_NAND_BOOT
  90 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1043aqds/ls1043aqds_rcw_nand.cfg
  91 #endif
  92
  93 #ifdef CONFIG_SD_BOOT
  94 #ifdef CONFIG_SD_BOOT_QSPI
  95 #define CONFIG_SYS_FSL_PBL_RCW \
  96         board/freescale/ls1043aqds/ls1043aqds_rcw_sd_qspi.cfg
  97 #else
  98 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1043aqds/ls1043aqds_rcw_sd_ifc.cfg
  99 #endif
 100 #endif
 101
 102 /* LPUART */
 103 #ifdef CONFIG_LPUART
 104 #define CONFIG_LPUART_32B_REG
 105 #endif
 106
 107 /* SATA */
 108 #define CONFIG_LIBATA
 109 #define CONFIG_SCSI_AHCI
 110 #define CONFIG_SCSI_AHCI_PLAT
 111 #define CONFIG_CMD_SCSI
 112 #define CONFIG_CMD_FAT
 113 #define CONFIG_CMD_EXT2
 114 #define CONFIG_DOS_PARTITION
 115 #define CONFIG_BOARD_LATE_INIT
 116
 117
 118 /* EEPROM */
 119 #define CONFIG_ID_EEPROM
 120 #define CONFIG_SYS_I2C_EEPROM_NXID
 121 #define CONFIG_SYS_EEPROM_BUS_NUM               0
 122 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x57
 123 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1
 124 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       3
 125 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   5
 126
 127 #define CONFIG_SYS_SATA                         AHCI_BASE_ADDR
 128
 129 #define CONFIG_SYS_SCSI_MAX_SCSI_ID             1
 130 #define CONFIG_SYS_SCSI_MAX_LUN                 1
 131 #define CONFIG_SYS_SCSI_MAX_DEVICE              (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 132                                                 CONFIG_SYS_SCSI_MAX_LUN)
 133
 134 /*
 135  * IFC Definitions
 136  */
 137 #if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
 138 #define CONFIG_SYS_NOR0_CSPR_EXT        (0x0)
 139 #define CONFIG_SYS_NOR0_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 140                                 CSPR_PORT_SIZE_16 | \
 141                                 CSPR_MSEL_NOR | \
 142                                 CSPR_V)
 143 #define CONFIG_SYS_NOR1_CSPR_EXT        (0x0)
 144 #define CONFIG_SYS_NOR1_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
 145                                 + 0x8000000) | \
 146                                 CSPR_PORT_SIZE_16 | \
 147                                 CSPR_MSEL_NOR | \
 148                                 CSPR_V)
 149 #define CONFIG_SYS_NOR_AMASK            IFC_AMASK(128 * 1024 * 1024)
 150
 151 #define CONFIG_SYS_NOR_CSOR             (CSOR_NOR_ADM_SHIFT(4) | \
 152                                         CSOR_NOR_TRHZ_80)
 153 #define CONFIG_SYS_NOR_FTIM0            (FTIM0_NOR_TACSE(0x4) | \
 154                                         FTIM0_NOR_TEADC(0x5) | \
 155                                         FTIM0_NOR_TEAHC(0x5))
 156 #define CONFIG_SYS_NOR_FTIM1            (FTIM1_NOR_TACO(0x35) | \
 157                                         FTIM1_NOR_TRAD_NOR(0x1a) | \
 158                                         FTIM1_NOR_TSEQRAD_NOR(0x13))
 159 #define CONFIG_SYS_NOR_FTIM2            (FTIM2_NOR_TCS(0x4) | \
 160                                         FTIM2_NOR_TCH(0x4) | \
 161                                         FTIM2_NOR_TWPH(0xe) | \
 162                                         FTIM2_NOR_TWP(0x1c))
 163 #define CONFIG_SYS_NOR_FTIM3            0
 164
 165 #define CONFIG_SYS_MAX_FLASH_BANKS      1       /* number of banks */
 166 #define CONFIG_SYS_MAX_FLASH_SECT       1024    /* sectors per device */
 167 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000   /* Flash Erase Timeout (ms) */
 168 #define CONFIG_SYS_FLASH_WRITE_TOUT     500     /* Flash Write Timeout (ms) */
 169
 170 #define CONFIG_SYS_FLASH_EMPTY_INFO
 171 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE_PHYS, \
 172                                         CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000}
 173
 174 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
 175 #define CONFIG_SYS_WRITE_SWAPPED_DATA
 176
 177 /*
 178  * NAND Flash Definitions
 179  */
 180 #define CONFIG_NAND_FSL_IFC
 181
 182 #define CONFIG_SYS_NAND_BASE            0x7e800000
 183 #define CONFIG_SYS_NAND_BASE_PHYS       CONFIG_SYS_NAND_BASE
 184
 185 #define CONFIG_SYS_NAND_CSPR_EXT        (0x0)
 186
 187 #define CONFIG_SYS_NAND_CSPR    (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
 188                                 | CSPR_PORT_SIZE_8      \
 189                                 | CSPR_MSEL_NAND        \
 190                                 | CSPR_V)
 191 #define CONFIG_SYS_NAND_AMASK   IFC_AMASK(64*1024)
 192 #define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
 193                                 | CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
 194                                 | CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
 195                                 | CSOR_NAND_RAL_3       /* RAL = 3 Bytes */ \
 196                                 | CSOR_NAND_PGS_2K      /* Page Size = 2K */ \
 197                                 | CSOR_NAND_SPRZ_64     /* Spare size = 64 */ \
 198                                 | CSOR_NAND_PB(64))     /* 64 Pages Per Block */
 199
 200 #define CONFIG_SYS_NAND_ONFI_DETECTION
 201
 202 #define CONFIG_SYS_NAND_FTIM0           (FTIM0_NAND_TCCST(0x7) | \
 203                                         FTIM0_NAND_TWP(0x18)   | \
 204                                         FTIM0_NAND_TWCHT(0x7) | \
 205                                         FTIM0_NAND_TWH(0xa))
 206 #define CONFIG_SYS_NAND_FTIM1           (FTIM1_NAND_TADLE(0x32) | \
 207                                         FTIM1_NAND_TWBE(0x39)  | \
 208                                         FTIM1_NAND_TRR(0xe)   | \
 209                                         FTIM1_NAND_TRP(0x18))
 210 #define CONFIG_SYS_NAND_FTIM2           (FTIM2_NAND_TRAD(0xf) | \
 211                                         FTIM2_NAND_TREH(0xa) | \
 212                                         FTIM2_NAND_TWHRE(0x1e))
 213 #define CONFIG_SYS_NAND_FTIM3           0x0
 214
 215 #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
 216 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 217 #define CONFIG_MTD_NAND_VERIFY_WRITE
 218 #define CONFIG_CMD_NAND
 219
 220 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 221 #endif
 222
 223 #ifdef CONFIG_NAND_BOOT
 224 #define CONFIG_SPL_PAD_TO               0x20000         /* block aligned */
 225 #define CONFIG_SYS_NAND_U_BOOT_OFFS     CONFIG_SPL_PAD_TO
 226 #define CONFIG_SYS_NAND_U_BOOT_SIZE     (640 << 10)
 227 #endif
 228
 229 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 230 #define CONFIG_QIXIS_I2C_ACCESS
 231 #define CONFIG_SYS_NO_FLASH
 232 #undef CONFIG_CMD_IMLS
 233 #endif
 234
 235 /*
 236  * QIXIS Definitions
 237  */
 238 #define CONFIG_FSL_QIXIS
 239
 240 #ifdef CONFIG_FSL_QIXIS
 241 #define QIXIS_BASE                      0x7fb00000
 242 #define QIXIS_BASE_PHYS                 QIXIS_BASE
 243 #define CONFIG_SYS_I2C_FPGA_ADDR        0x66
 244 #define QIXIS_LBMAP_SWITCH              6
 245 #define QIXIS_LBMAP_MASK                0x0f
 246 #define QIXIS_LBMAP_SHIFT               0
 247 #define QIXIS_LBMAP_DFLTBANK            0x00
 248 #define QIXIS_LBMAP_ALTBANK             0x04
 249 #define QIXIS_LBMAP_NAND                0x09
 250 #define QIXIS_LBMAP_SD                  0x00
 251 #define QIXIS_LBMAP_SD_QSPI             0xff
 252 #define QIXIS_LBMAP_QSPI                0xff
 253 #define QIXIS_RCW_SRC_NAND              0x106
 254 #define QIXIS_RCW_SRC_SD                0x040
 255 #define QIXIS_RCW_SRC_QSPI              0x045
 256 #define QIXIS_RST_CTL_RESET             0x41
 257 #define QIXIS_RCFG_CTL_RECONFIG_IDLE    0x20
 258 #define QIXIS_RCFG_CTL_RECONFIG_START   0x21
 259 #define QIXIS_RCFG_CTL_WATCHDOG_ENBLE   0x08
 260
 261 #define CONFIG_SYS_FPGA_CSPR_EXT        (0x0)
 262 #define CONFIG_SYS_FPGA_CSPR            (CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) | \
 263                                         CSPR_PORT_SIZE_8 | \
 264                                         CSPR_MSEL_GPCM | \
 265                                         CSPR_V)
 266 #define CONFIG_SYS_FPGA_AMASK           IFC_AMASK(64 * 1024)
 267 #define CONFIG_SYS_FPGA_CSOR            (CSOR_NOR_ADM_SHIFT(4) | \
 268                                         CSOR_NOR_NOR_MODE_AVD_NOR | \
 269                                         CSOR_NOR_TRHZ_80)
 270
 271 /*
 272  * QIXIS Timing parameters for IFC GPCM
 273  */
 274 #define CONFIG_SYS_FPGA_FTIM0           (FTIM0_GPCM_TACSE(0xc) | \
 275                                         FTIM0_GPCM_TEADC(0x20) | \
 276                                         FTIM0_GPCM_TEAHC(0x10))
 277 #define CONFIG_SYS_FPGA_FTIM1           (FTIM1_GPCM_TACO(0x50) | \
 278                                         FTIM1_GPCM_TRAD(0x1f))
 279 #define CONFIG_SYS_FPGA_FTIM2           (FTIM2_GPCM_TCS(0x8) | \
 280                                         FTIM2_GPCM_TCH(0x8) | \
 281                                         FTIM2_GPCM_TWP(0xf0))
 282 #define CONFIG_SYS_FPGA_FTIM3           0x0
 283 #endif
 284
 285 #ifdef CONFIG_NAND_BOOT
 286 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NAND_CSPR_EXT
 287 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NAND_CSPR
 288 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NAND_AMASK
 289 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NAND_CSOR
 290 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NAND_FTIM0
 291 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NAND_FTIM1
 292 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NAND_FTIM2
 293 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NAND_FTIM3
 294 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 295 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR0_CSPR
 296 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 297 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 298 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 299 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 300 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 301 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 302 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 303 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NOR1_CSPR
 304 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NOR_AMASK
 305 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NOR_CSOR
 306 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NOR_FTIM0
 307 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NOR_FTIM1
 308 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NOR_FTIM2
 309 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NOR_FTIM3
 310 #define CONFIG_SYS_CSPR3_EXT            CONFIG_SYS_FPGA_CSPR_EXT
 311 #define CONFIG_SYS_CSPR3                CONFIG_SYS_FPGA_CSPR
 312 #define CONFIG_SYS_AMASK3               CONFIG_SYS_FPGA_AMASK
 313 #define CONFIG_SYS_CSOR3                CONFIG_SYS_FPGA_CSOR
 314 #define CONFIG_SYS_CS3_FTIM0            CONFIG_SYS_FPGA_FTIM0
 315 #define CONFIG_SYS_CS3_FTIM1            CONFIG_SYS_FPGA_FTIM1
 316 #define CONFIG_SYS_CS3_FTIM2            CONFIG_SYS_FPGA_FTIM2
 317 #define CONFIG_SYS_CS3_FTIM3            CONFIG_SYS_FPGA_FTIM3
 318 #else
 319 #define CONFIG_SYS_CSPR0_EXT            CONFIG_SYS_NOR0_CSPR_EXT
 320 #define CONFIG_SYS_CSPR0                CONFIG_SYS_NOR0_CSPR
 321 #define CONFIG_SYS_AMASK0               CONFIG_SYS_NOR_AMASK
 322 #define CONFIG_SYS_CSOR0                CONFIG_SYS_NOR_CSOR
 323 #define CONFIG_SYS_CS0_FTIM0            CONFIG_SYS_NOR_FTIM0
 324 #define CONFIG_SYS_CS0_FTIM1            CONFIG_SYS_NOR_FTIM1
 325 #define CONFIG_SYS_CS0_FTIM2            CONFIG_SYS_NOR_FTIM2
 326 #define CONFIG_SYS_CS0_FTIM3            CONFIG_SYS_NOR_FTIM3
 327 #define CONFIG_SYS_CSPR1_EXT            CONFIG_SYS_NOR1_CSPR_EXT
 328 #define CONFIG_SYS_CSPR1                CONFIG_SYS_NOR1_CSPR
 329 #define CONFIG_SYS_AMASK1               CONFIG_SYS_NOR_AMASK
 330 #define CONFIG_SYS_CSOR1                CONFIG_SYS_NOR_CSOR
 331 #define CONFIG_SYS_CS1_FTIM0            CONFIG_SYS_NOR_FTIM0
 332 #define CONFIG_SYS_CS1_FTIM1            CONFIG_SYS_NOR_FTIM1
 333 #define CONFIG_SYS_CS1_FTIM2            CONFIG_SYS_NOR_FTIM2
 334 #define CONFIG_SYS_CS1_FTIM3            CONFIG_SYS_NOR_FTIM3
 335 #define CONFIG_SYS_CSPR2_EXT            CONFIG_SYS_NAND_CSPR_EXT
 336 #define CONFIG_SYS_CSPR2                CONFIG_SYS_NAND_CSPR
 337 #define CONFIG_SYS_AMASK2               CONFIG_SYS_NAND_AMASK
 338 #define CONFIG_SYS_CSOR2                CONFIG_SYS_NAND_CSOR
 339 #define CONFIG_SYS_CS2_FTIM0            CONFIG_SYS_NAND_FTIM0
 340 #define CONFIG_SYS_CS2_FTIM1            CONFIG_SYS_NAND_FTIM1
 341 #define CONFIG_SYS_CS2_FTIM2            CONFIG_SYS_NAND_FTIM2
 342 #define CONFIG_SYS_CS2_FTIM3            CONFIG_SYS_NAND_FTIM3
 343 #define CONFIG_SYS_CSPR3_EXT            CONFIG_SYS_FPGA_CSPR_EXT
 344 #define CONFIG_SYS_CSPR3                CONFIG_SYS_FPGA_CSPR
 345 #define CONFIG_SYS_AMASK3               CONFIG_SYS_FPGA_AMASK
 346 #define CONFIG_SYS_CSOR3                CONFIG_SYS_FPGA_CSOR
 347 #define CONFIG_SYS_CS3_FTIM0            CONFIG_SYS_FPGA_FTIM0
 348 #define CONFIG_SYS_CS3_FTIM1            CONFIG_SYS_FPGA_FTIM1
 349 #define CONFIG_SYS_CS3_FTIM2            CONFIG_SYS_FPGA_FTIM2
 350 #define CONFIG_SYS_CS3_FTIM3            CONFIG_SYS_FPGA_FTIM3
 351 #endif
 352
 353 /*
 354  * I2C bus multiplexer
 355  */
 356 #define I2C_MUX_PCA_ADDR_PRI            0x77
 357 #define I2C_MUX_PCA_ADDR_SEC            0x76 /* Secondary multiplexer */
 358 #define I2C_RETIMER_ADDR                0x18
 359 #define I2C_MUX_CH_DEFAULT              0x8
 360 #define I2C_MUX_CH_CH7301               0xC
 361 #define I2C_MUX_CH5                     0xD
 362 #define I2C_MUX_CH7                     0xF
 363
 364 #define I2C_MUX_CH_VOL_MONITOR 0xa
 365
 366 /* Voltage monitor on channel 2*/
 367 #define I2C_VOL_MONITOR_ADDR           0x40
 368 #define I2C_VOL_MONITOR_BUS_V_OFFSET   0x2
 369 #define I2C_VOL_MONITOR_BUS_V_OVF      0x1
 370 #define I2C_VOL_MONITOR_BUS_V_SHIFT    3
 371
 372 #define CONFIG_VID_FLS_ENV              "ls1043aqds_vdd_mv"
 373 #ifndef CONFIG_SPL_BUILD
 374 #define CONFIG_VID
 375 #endif
 376 #define CONFIG_VOL_MONITOR_IR36021_SET
 377 #define CONFIG_VOL_MONITOR_INA220
 378 /* The lowest and highest voltage allowed for LS1043AQDS */
 379 #define VDD_MV_MIN                      819
 380 #define VDD_MV_MAX                      1212
 381
 382 /* QSPI device */
 383 #if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 384 #define CONFIG_FSL_QSPI
 385 #ifdef CONFIG_FSL_QSPI
 386 #define CONFIG_SPI_FLASH_SPANSION
 387 #define FSL_QSPI_FLASH_SIZE             (1 << 24)
 388 #define FSL_QSPI_FLASH_NUM              2
 389 #endif
 390 #endif
 391
 392 /* USB */
 393 #define CONFIG_HAS_FSL_XHCI_USB
 394 #ifdef CONFIG_HAS_FSL_XHCI_USB
 395 #define CONFIG_USB_XHCI
 396 #define CONFIG_USB_XHCI_FSL
 397 #define CONFIG_USB_XHCI_DWC3
 398 #define CONFIG_USB_MAX_CONTROLLER_COUNT         3
 399 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS      2
 400 #define CONFIG_CMD_USB
 401 #define CONFIG_USB_STORAGE
 402 #define CONFIG_CMD_EXT2
 403 #endif
 404
 405 /*
 406  * Miscellaneous configurable options
 407  */
 408 #define CONFIG_MISC_INIT_R
 409 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 410 #define CONFIG_SYS_PROMPT               "=> "
 411 #define CONFIG_AUTO_COMPLETE
 412 #define CONFIG_SYS_PBSIZE               \
 413                 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 414 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 415
 416 #define CONFIG_CMD_GREPENV
 417 #define CONFIG_CMD_MEMINFO
 418 #define CONFIG_CMD_MEMTEST
 419 #define CONFIG_SYS_MEMTEST_START        0x80000000
 420 #define CONFIG_SYS_MEMTEST_END          0x9fffffff
 421
 422 #define CONFIG_SYS_HZ                   1000
 423
 424 /*
 425  * Stack sizes
 426  * The stack sizes are set up in start.S using the settings below
 427  */
 428 #define CONFIG_STACKSIZE                (30 * 1024)
 429
 430 #define CONFIG_SYS_INIT_SP_OFFSET \
 431         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 432
 433 #ifdef CONFIG_SPL_BUILD
 434 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
 435 #else
 436 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 437 #endif
 438
 439 /*
 440  * Environment
 441  */
 442 #define CONFIG_ENV_OVERWRITE
 443
 444 #ifdef CONFIG_NAND_BOOT
 445 #define CONFIG_ENV_IS_IN_NAND
 446 #define CONFIG_ENV_SIZE                 0x2000
 447 #define CONFIG_ENV_OFFSET               (10 * CONFIG_SYS_NAND_BLOCK_SIZE)
 448 #elif defined(CONFIG_SD_BOOT)
 449 #define CONFIG_ENV_OFFSET               (1024 * 1024)
 450 #define CONFIG_ENV_IS_IN_MMC
 451 #define CONFIG_SYS_MMC_ENV_DEV          0
 452 #define CONFIG_ENV_SIZE                 0x2000
 453 #elif defined(CONFIG_QSPI_BOOT)
 454 #define CONFIG_ENV_IS_IN_SPI_FLASH
 455 #define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
 456 #define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
 457 #define CONFIG_ENV_SECT_SIZE            0x10000
 458 #else
 459 #define CONFIG_ENV_IS_IN_FLASH
 460 #define CONFIG_ENV_ADDR                 (CONFIG_SYS_FLASH_BASE + 0x200000)
 461 #define CONFIG_ENV_SECT_SIZE            0x20000
 462 #define CONFIG_ENV_SIZE                 0x20000
 463 #endif
 464
 465 #define CONFIG_CMD_BOOTZ
 466 #define CONFIG_CMD_MII
 467 #define CONFIG_CMDLINE_TAG
 468
 469 #include <asm/fsl_secure_boot.h>
 470
 471 #endif /* __LS1043AQDS_H__ */