include/configs/m53evk.h

   1 /*
   2  * DENX M53 configuration
   3  * Copyright (C) 2012-2013 Marek Vasut <marex@denx.de>
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 #ifndef __M53EVK_CONFIG_H__
   9 #define __M53EVK_CONFIG_H__
  10
  11 #define CONFIG_MX53
  12 #define CONFIG_MXC_GPIO
  13
  14 #include <asm/arch/imx-regs.h>
  15
  16 #define CONFIG_DISPLAY_CPUINFO
  17 #define CONFIG_BOARD_EARLY_INIT_F
  18 #define CONFIG_REVISION_TAG
  19 #define CONFIG_SYS_NO_FLASH
  20 #define CONFIG_SYS_FSL_CLK
  21
  22 #define CONFIG_TIMESTAMP                /* Print image info with timestamp */
  23
  24 /*
  25  * U-Boot Commands
  26  */
  27 #define CONFIG_DISPLAY_BOARDINFO
  28 #define CONFIG_DOS_PARTITION
  29 #define CONFIG_FAT_WRITE
  30
  31 #define CONFIG_CMD_ASKENV
  32 #define CONFIG_CMD_BMP
  33 #define CONFIG_CMD_DATE
  34 #define CONFIG_CMD_DHCP
  35 #define CONFIG_CMD_EXT4
  36 #define CONFIG_CMD_EXT4_WRITE
  37 #define CONFIG_CMD_FAT
  38 #define CONFIG_CMD_FS_GENERIC
  39 #define CONFIG_CMD_GREPENV
  40 #define CONFIG_CMD_I2C
  41 #define CONFIG_CMD_MII
  42 #define CONFIG_CMD_MMC
  43 #define CONFIG_CMD_NAND
  44 #define CONFIG_CMD_PING
  45 #define CONFIG_CMD_SATA
  46 #define CONFIG_CMD_USB
  47 #define CONFIG_VIDEO
  48
  49
  50 /*
  51  * Memory configurations
  52  */
  53 #define CONFIG_NR_DRAM_BANKS            2
  54 #define PHYS_SDRAM_1                    CSD0_BASE_ADDR
  55 #define PHYS_SDRAM_1_SIZE               (gd->bd->bi_dram[0].size)
  56 #define PHYS_SDRAM_2                    CSD1_BASE_ADDR
  57 #define PHYS_SDRAM_2_SIZE               (gd->bd->bi_dram[1].size)
  58 #define PHYS_SDRAM_SIZE                 (gd->ram_size)
  59 #define CONFIG_SYS_MALLOC_LEN           (10 * 1024 * 1024)
  60 #define CONFIG_SYS_MEMTEST_START        0x70000000
  61 #define CONFIG_SYS_MEMTEST_END          0x8ff00000
  62
  63 #define CONFIG_SYS_SDRAM_BASE           (PHYS_SDRAM_1)
  64 #define CONFIG_SYS_INIT_RAM_ADDR        (IRAM_BASE_ADDR)
  65 #define CONFIG_SYS_INIT_RAM_SIZE        (IRAM_SIZE)
  66
  67 #define CONFIG_SYS_INIT_SP_OFFSET \
  68         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  69 #define CONFIG_SYS_INIT_SP_ADDR \
  70         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
  71
  72 #define CONFIG_SYS_TEXT_BASE            0x71000000
  73
  74 /*
  75  * U-Boot general configurations
  76  */
  77 #define CONFIG_SYS_LONGHELP
  78 #define CONFIG_SYS_CBSIZE       1024            /* Console I/O buffer size */
  79 #define CONFIG_SYS_PBSIZE       \
  80         (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
  81                                                 /* Print buffer size */
  82 #define CONFIG_SYS_MAXARGS      32              /* Max number of command args */
  83 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE
  84                                                 /* Boot argument buffer size */
  85 #define CONFIG_VERSION_VARIABLE                 /* U-BOOT version */
  86 #define CONFIG_AUTO_COMPLETE                    /* Command auto complete */
  87 #define CONFIG_CMDLINE_EDITING                  /* Command history etc */
  88 #define CONFIG_SYS_HUSH_PARSER
  89
  90 /*
  91  * Serial Driver
  92  */
  93 #define CONFIG_MXC_UART
  94 #define CONFIG_MXC_UART_BASE            UART2_BASE
  95 #define CONFIG_CONS_INDEX               1
  96 #define CONFIG_BAUDRATE                 115200
  97
  98 /*
  99  * MMC Driver
 100  */
 101 #ifdef CONFIG_CMD_MMC
 102 #define CONFIG_MMC
 103 #define CONFIG_GENERIC_MMC
 104 #define CONFIG_FSL_ESDHC
 105 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
 106 #define CONFIG_SYS_FSL_ESDHC_NUM        1
 107 #endif
 108
 109 /*
 110  * NAND
 111  */
 112 #define CONFIG_ENV_SIZE                 (16 * 1024)
 113 #ifdef CONFIG_CMD_NAND
 114 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 115 #define CONFIG_SYS_NAND_BASE            NFC_BASE_ADDR_AXI
 116 #define CONFIG_NAND_MXC
 117 #define CONFIG_MXC_NAND_REGS_BASE       NFC_BASE_ADDR_AXI
 118 #define CONFIG_MXC_NAND_IP_REGS_BASE    NFC_BASE_ADDR
 119 #define CONFIG_SYS_NAND_LARGEPAGE
 120 #define CONFIG_MXC_NAND_HWECC
 121 #define CONFIG_SYS_NAND_USE_FLASH_BBT
 122
 123 /* Environment is in NAND */
 124 #define CONFIG_ENV_IS_IN_NAND
 125 #define CONFIG_ENV_SIZE_REDUND          CONFIG_ENV_SIZE
 126 #define CONFIG_ENV_SECT_SIZE            (128 * 1024)
 127 #define CONFIG_ENV_RANGE                (4 * CONFIG_ENV_SECT_SIZE)
 128 #define CONFIG_ENV_OFFSET               (8 * CONFIG_ENV_SECT_SIZE) /* 1 MiB */
 129 #define CONFIG_ENV_OFFSET_REDUND        \
 130                 (CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)
 131
 132 #define CONFIG_CMD_UBI
 133 #define CONFIG_CMD_UBIFS
 134 #define CONFIG_CMD_MTDPARTS
 135 #define CONFIG_RBTREE
 136 #define CONFIG_LZO
 137 #define CONFIG_MTD_DEVICE
 138 #define CONFIG_MTD_PARTITIONS
 139 #define MTDIDS_DEFAULT                  "nand0=mxc_nand"
 140 #define MTDPARTS_DEFAULT                        \
 141         "mtdparts=mxc_nand:"                    \
 142                 "1024k(u-boot),"                \
 143                 "512k(env1),"                   \
 144                 "512k(env2),"                   \
 145                 "14m(boot),"                    \
 146                 "240m(data),"                   \
 147                 "-@2048k(UBI)"
 148 #else
 149 #define CONFIG_ENV_IS_NOWHERE
 150 #endif
 151
 152 /*
 153  * Ethernet on SOC (FEC)
 154  */
 155 #ifdef CONFIG_CMD_NET
 156 #define CONFIG_FEC_MXC
 157 #define IMX_FEC_BASE                    FEC_BASE_ADDR
 158 #define CONFIG_FEC_MXC_PHYADDR          0x0
 159 #define CONFIG_MII
 160 #define CONFIG_DISCOVER_PHY
 161 #define CONFIG_FEC_XCV_TYPE             RMII
 162 #define CONFIG_PHYLIB
 163 #define CONFIG_PHY_MICREL
 164 #define CONFIG_ETHPRIME                 "FEC0"
 165 #endif
 166
 167 /*
 168  * I2C
 169  */
 170 #ifdef CONFIG_CMD_I2C
 171 #define CONFIG_SYS_I2C
 172 #define CONFIG_SYS_I2C_MXC
 173 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
 174 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
 175 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
 176 #define CONFIG_SYS_RTC_BUS_NUM          1 /* I2C2 */
 177 #endif
 178
 179 /*
 180  * RTC
 181  */
 182 #ifdef CONFIG_CMD_DATE
 183 #define CONFIG_RTC_M41T62
 184 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 185 #define CONFIG_SYS_M41T11_BASE_YEAR     2000
 186 #endif
 187
 188 /*
 189  * USB
 190  */
 191 #ifdef CONFIG_CMD_USB
 192 #define CONFIG_USB_EHCI
 193 #define CONFIG_USB_EHCI_MX5
 194 #define CONFIG_USB_STORAGE
 195 #define CONFIG_USB_HOST_ETHER
 196 #define CONFIG_USB_ETHER_ASIX
 197 #define CONFIG_USB_ETHER_MCS7830
 198 #define CONFIG_USB_ETHER_SMSC95XX
 199 #define CONFIG_MXC_USB_PORT             1
 200 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
 201 #define CONFIG_MXC_USB_FLAGS            0
 202 #endif
 203
 204 /*
 205  * SATA
 206  */
 207 #ifdef CONFIG_CMD_SATA
 208 #define CONFIG_DWC_AHSATA
 209 #define CONFIG_SYS_SATA_MAX_DEVICE      1
 210 #define CONFIG_DWC_AHSATA_PORT_ID       0
 211 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_BASE_ADDR
 212 #define CONFIG_LBA48
 213 #define CONFIG_LIBATA
 214 #endif
 215
 216 /*
 217  * LCD
 218  */
 219 #ifdef CONFIG_VIDEO
 220 #define CONFIG_VIDEO_IPUV3
 221 #define CONFIG_CFB_CONSOLE
 222 #define CONFIG_VGA_AS_SINGLE_DEVICE
 223 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 224 #define CONFIG_VIDEO_BMP_RLE8
 225 #define CONFIG_VIDEO_BMP_GZIP
 226 #define CONFIG_SPLASH_SCREEN
 227 #define CONFIG_SPLASHIMAGE_GUARD
 228 #define CONFIG_SPLASH_SCREEN_ALIGN
 229 #define CONFIG_BMP_16BPP
 230 #define CONFIG_VIDEO_LOGO
 231 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE  (2 << 20)
 232 #define CONFIG_IPUV3_CLK                200000000
 233 #endif
 234
 235 /*
 236  * Boot Linux
 237  */
 238 #define CONFIG_CMDLINE_TAG
 239 #define CONFIG_INITRD_TAG
 240 #define CONFIG_REVISION_TAG
 241 #define CONFIG_SETUP_MEMORY_TAGS
 242 #define CONFIG_BOOTDELAY        3
 243 #define CONFIG_BOOTFILE         "fitImage"
 244 #define CONFIG_BOOTARGS         "console=ttymxc1,115200"
 245 #define CONFIG_LOADADDR         0x70800000
 246 #define CONFIG_BOOTCOMMAND      "run mmc_mmc"
 247 #define CONFIG_SYS_LOAD_ADDR    CONFIG_LOADADDR
 248
 249 /*
 250  * NAND SPL
 251  */
 252 #define CONFIG_SPL_FRAMEWORK
 253 #define CONFIG_SPL_TARGET               "u-boot-with-nand-spl.imx"
 254 #define CONFIG_SPL_BOARD_INIT
 255 #define CONFIG_SPL_TEXT_BASE            0x70008000
 256 #define CONFIG_SPL_PAD_TO               0x8000
 257 #define CONFIG_SPL_STACK                0x70004000
 258 #define CONFIG_SPL_GPIO_SUPPORT
 259 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 260 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 261 #define CONFIG_SPL_NAND_SUPPORT
 262 #define CONFIG_SPL_SERIAL_SUPPORT
 263
 264 #define CONFIG_SYS_NAND_U_BOOT_OFFS     CONFIG_SPL_PAD_TO
 265 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
 266 #define CONFIG_SYS_NAND_OOBSIZE         64
 267 #define CONFIG_SYS_NAND_PAGE_COUNT      64
 268 #define CONFIG_SYS_NAND_SIZE            (256 * 1024 * 1024)
 269 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   0
 270
 271 /*
 272  * Extra Environments
 273  */
 274 #define CONFIG_PREBOOT          "run try_bootscript"
 275 #define CONFIG_HOSTNAME         m53evk
 276
 277 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 278         "consdev=ttymxc1\0"                                             \
 279         "baudrate=115200\0"                                             \
 280         "bootscript=boot.scr\0"                                         \
 281         "bootdev=/dev/mmcblk0p1\0"                                      \
 282         "rootdev=/dev/mmcblk0p2\0"                                      \
 283         "netdev=eth0\0"                                                 \
 284         "rootpath=/opt/eldk-5.5/armv7a-hf/rootfs-qte-sdk\0"             \
 285         "kernel_addr_r=0x72000000\0"                                    \
 286         "addcons="                                                      \
 287                 "setenv bootargs ${bootargs} "                          \
 288                 "console=${consdev},${baudrate}\0"                      \
 289         "addip="                                                        \
 290                 "setenv bootargs ${bootargs} "                          \
 291                 "ip=${ipaddr}:${serverip}:${gatewayip}:"                \
 292                         "${netmask}:${hostname}:${netdev}:off\0"        \
 293         "addmisc="                                                      \
 294                 "setenv bootargs ${bootargs} ${miscargs}\0"             \
 295         "adddfltmtd="                                                   \
 296                 "if test \"x${mtdparts}\" == \"x\" ; then "             \
 297                         "mtdparts default ; "                           \
 298                 "fi\0"                                                  \
 299         "addmtd="                                                       \
 300                 "run adddfltmtd ; "                                     \
 301                 "setenv bootargs ${bootargs} ${mtdparts}\0"             \
 302         "addargs=run addcons addmtd addmisc\0"                          \
 303         "mmcload="                                                      \
 304                 "mmc rescan ; "                                         \
 305                 "load mmc 0:1 ${kernel_addr_r} ${bootfile}\0"           \
 306         "ubiload="                                                      \
 307                 "ubi part UBI ; ubifsmount ubi0:rootfs ; "              \
 308                 "ubifsload ${kernel_addr_r} /boot/${bootfile}\0"        \
 309         "netload="                                                      \
 310                 "tftp ${kernel_addr_r} ${hostname}/${bootfile}\0"       \
 311         "miscargs=nohlt panic=1\0"                                      \
 312         "mmcargs=setenv bootargs root=${rootdev} rw rootwait\0"         \
 313         "ubiargs="                                                      \
 314                 "setenv bootargs ubi.mtd=5 "                            \
 315                 "root=ubi0:rootfs rootfstype=ubifs\0"                   \
 316         "nfsargs="                                                      \
 317                 "setenv bootargs root=/dev/nfs rw "                     \
 318                         "nfsroot=${serverip}:${rootpath},v3,tcp\0"      \
 319         "mmc_mmc="                                                      \
 320                 "run mmcload mmcargs addargs ; "                        \
 321                 "bootm ${kernel_addr_r}\0"                              \
 322         "mmc_ubi="                                                      \
 323                 "run mmcload ubiargs addargs ; "                        \
 324                 "bootm ${kernel_addr_r}\0"                              \
 325         "mmc_nfs="                                                      \
 326                 "run mmcload nfsargs addip addargs ; "                  \
 327                 "bootm ${kernel_addr_r}\0"                              \
 328         "ubi_mmc="                                                      \
 329                 "run ubiload mmcargs addargs ; "                        \
 330                 "bootm ${kernel_addr_r}\0"                              \
 331         "ubi_ubi="                                                      \
 332                 "run ubiload ubiargs addargs ; "                        \
 333                 "bootm ${kernel_addr_r}\0"                              \
 334         "ubi_nfs="                                                      \
 335                 "run ubiload nfsargs addip addargs ; "                  \
 336                 "bootm ${kernel_addr_r}\0"                              \
 337         "net_mmc="                                                      \
 338                 "run netload mmcargs addargs ; "                        \
 339                 "bootm ${kernel_addr_r}\0"                              \
 340         "net_ubi="                                                      \
 341                 "run netload ubiargs addargs ; "                        \
 342                 "bootm ${kernel_addr_r}\0"                              \
 343         "net_nfs="                                                      \
 344                 "run netload nfsargs addip addargs ; "                  \
 345                 "bootm ${kernel_addr_r}\0"                              \
 346         "try_bootscript="                                               \
 347                 "mmc rescan;"                                           \
 348                 "if test -e mmc 0:1 ${bootscript} ; then "              \
 349                 "if load mmc 0:1 ${kernel_addr_r} ${bootscript};"       \
 350                 "then ; "                                               \
 351                         "echo Running bootscript... ; "                 \
 352                         "source ${kernel_addr_r} ; "                    \
 353                 "fi ; "                                                 \
 354                 "fi\0"
 355
 356 #endif  /* __M53EVK_CONFIG_H__ */