include/configs/microblaze-generic.h

   1 /*
   2  * (C) Copyright 2007-2010 Michal Simek
   3  *
   4  * Michal SIMEK <monstr@monstr.eu>
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 #include "../board/xilinx/microblaze-generic/xparameters.h"
  13
  14 /* MicroBlaze CPU */
  15 #define MICROBLAZE_V5           1
  16
  17 /* linear and spi flash memory */
  18 #ifdef XILINX_FLASH_START
  19 #define FLASH
  20 #undef  SPIFLASH
  21 #undef  RAMENV  /* hold environment in flash */
  22 #else
  23 #ifdef XILINX_SPI_FLASH_BASEADDR
  24 #undef  FLASH
  25 #define SPIFLASH
  26 #undef  RAMENV  /* hold environment in flash */
  27 #else
  28 #undef  FLASH
  29 #undef  SPIFLASH
  30 #define RAMENV  /* hold environment in RAM */
  31 #endif
  32 #endif
  33
  34 /* uart */
  35 /* The following table includes the supported baudrates */
  36 # define CONFIG_SYS_BAUDRATE_TABLE \
  37         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
  38
  39 /* setting reset address */
  40 /*#define       CONFIG_SYS_RESET_ADDRESS        CONFIG_SYS_TEXT_BASE*/
  41
  42 /* gpio */
  43 #ifdef XILINX_GPIO_BASEADDR
  44 # define CONFIG_XILINX_GPIO
  45 # define CONFIG_SYS_GPIO_0_ADDR         XILINX_GPIO_BASEADDR
  46 #endif
  47
  48 /* watchdog */
  49 #if defined(XILINX_WATCHDOG_BASEADDR) && defined(XILINX_WATCHDOG_IRQ)
  50 # define CONFIG_WATCHDOG_BASEADDR       XILINX_WATCHDOG_BASEADDR
  51 # define CONFIG_WATCHDOG_IRQ            XILINX_WATCHDOG_IRQ
  52 # ifndef CONFIG_SPL_BUILD
  53 #  define CONFIG_HW_WATCHDOG
  54 #  define CONFIG_XILINX_TB_WATCHDOG
  55 # endif
  56 #endif
  57
  58 #define CONFIG_SYS_MALLOC_LEN   0xC0000
  59
  60 /* Stack location before relocation */
  61 #define CONFIG_SYS_INIT_SP_OFFSET       (CONFIG_SYS_TEXT_BASE - \
  62                                          CONFIG_SYS_MALLOC_F_LEN)
  63
  64 /*
  65  * CFI flash memory layout - Example
  66  * CONFIG_SYS_FLASH_BASE = 0x2200_0000;
  67  * CONFIG_SYS_FLASH_SIZE = 0x0080_0000;   8MB
  68  *
  69  * SECT_SIZE = 0x20000;                 128kB is one sector
  70  * CONFIG_ENV_SIZE = SECT_SIZE;         128kB environment store
  71  *
  72  * 0x2200_0000  CONFIG_SYS_FLASH_BASE
  73  *                                      FREE            256kB
  74  * 0x2204_0000  CONFIG_ENV_ADDR
  75  *                                      ENV_AREA        128kB
  76  * 0x2206_0000
  77  *                                      FREE
  78  * 0x2280_0000  CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE
  79  *
  80  */
  81
  82 #ifdef FLASH
  83 # define CONFIG_SYS_FLASH_BASE          XILINX_FLASH_START
  84 # define CONFIG_SYS_FLASH_SIZE          XILINX_FLASH_SIZE
  85 # define CONFIG_SYS_FLASH_CFI           1
  86 # define CONFIG_FLASH_CFI_DRIVER        1
  87 /* ?empty sector */
  88 # define CONFIG_SYS_FLASH_EMPTY_INFO    1
  89 /* max number of memory banks */
  90 # define CONFIG_SYS_MAX_FLASH_BANKS     1
  91 /* max number of sectors on one chip */
  92 # define CONFIG_SYS_MAX_FLASH_SECT      512
  93 /* hardware flash protection */
  94 # define CONFIG_SYS_FLASH_PROTECTION
  95 /* use buffered writes (20x faster) */
  96 # define        CONFIG_SYS_FLASH_USE_BUFFER_WRITE       1
  97 # ifdef RAMENV
  98 #  define CONFIG_ENV_IS_NOWHERE 1
  99 #  define CONFIG_ENV_SIZE       0x1000
 100 #  define CONFIG_ENV_ADDR       (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
 101
 102 # else  /* FLASH && !RAMENV */
 103 #  define CONFIG_ENV_IS_IN_FLASH        1
 104 /* 128K(one sector) for env */
 105 #  define CONFIG_ENV_SECT_SIZE  0x20000
 106 #  define CONFIG_ENV_ADDR \
 107                         (CONFIG_SYS_FLASH_BASE + (2 * CONFIG_ENV_SECT_SIZE))
 108 #  define CONFIG_ENV_SIZE       0x20000
 109 # endif /* FLASH && !RAMBOOT */
 110 #else /* !FLASH */
 111
 112 #ifdef SPIFLASH
 113 # define CONFIG_SYS_SPI_BASE            XILINX_SPI_FLASH_BASEADDR
 114 # define CONFIG_SPI                     1
 115 # define CONFIG_SF_DEFAULT_MODE         SPI_MODE_3
 116 # define CONFIG_SF_DEFAULT_SPEED        XILINX_SPI_FLASH_MAX_FREQ
 117 # define CONFIG_SF_DEFAULT_CS           XILINX_SPI_FLASH_CS
 118
 119 # ifdef RAMENV
 120 #  define CONFIG_ENV_IS_NOWHERE 1
 121 #  define CONFIG_ENV_SIZE       0x1000
 122 #  define CONFIG_ENV_ADDR       (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
 123
 124 # else  /* SPIFLASH && !RAMENV */
 125 #  define CONFIG_ENV_IS_IN_SPI_FLASH    1
 126 #  define CONFIG_ENV_SPI_MODE           SPI_MODE_3
 127 #  define CONFIG_ENV_SPI_MAX_HZ         CONFIG_SF_DEFAULT_SPEED
 128 #  define CONFIG_ENV_SPI_CS             CONFIG_SF_DEFAULT_CS
 129 /* 128K(two sectors) for env */
 130 #  define CONFIG_ENV_SECT_SIZE  0x10000
 131 #  define CONFIG_ENV_SIZE       (2 * CONFIG_ENV_SECT_SIZE)
 132 /* Warning: adjust the offset in respect of other flash content and size */
 133 #  define CONFIG_ENV_OFFSET     (128 * CONFIG_ENV_SECT_SIZE) /* at 8MB */
 134 # endif /* SPIFLASH && !RAMBOOT */
 135 #else /* !SPIFLASH */
 136
 137 /* ENV in RAM */
 138 # define CONFIG_ENV_IS_NOWHERE  1
 139 # define CONFIG_ENV_SIZE        0x1000
 140 # define CONFIG_ENV_ADDR        (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SIZE)
 141 #endif /* !SPIFLASH */
 142 #endif /* !FLASH */
 143
 144 #if defined(XILINX_USE_ICACHE)
 145 # define CONFIG_ICACHE
 146 #else
 147 # undef CONFIG_ICACHE
 148 #endif
 149
 150 #if defined(XILINX_USE_DCACHE)
 151 # define CONFIG_DCACHE
 152 #else
 153 # undef CONFIG_DCACHE
 154 #endif
 155
 156 #ifndef XILINX_DCACHE_BYTE_SIZE
 157 #define XILINX_DCACHE_BYTE_SIZE 32768
 158 #endif
 159
 160 /*
 161  * BOOTP options
 162  */
 163 #define CONFIG_BOOTP_BOOTFILESIZE
 164 #define CONFIG_BOOTP_BOOTPATH
 165 #define CONFIG_BOOTP_GATEWAY
 166 #define CONFIG_BOOTP_HOSTNAME
 167
 168 /*
 169  * Command line configuration.
 170  */
 171 #define CONFIG_CMD_MFSL
 172
 173 #if defined(FLASH)
 174 # if !defined(RAMENV)
 175 #  define CONFIG_CMD_SAVES
 176 # endif
 177
 178 #else
 179 #if defined(SPIFLASH)
 180
 181 # if !defined(RAMENV)
 182 #  define CONFIG_CMD_SAVES
 183 # endif
 184 #endif
 185 #endif
 186
 187 #if defined(CONFIG_CMD_JFFS2)
 188 # define CONFIG_MTD_PARTITIONS
 189 #endif
 190
 191 #if defined(CONFIG_CMD_UBI)
 192 # define CONFIG_MTD_PARTITIONS
 193 #endif
 194
 195 #if defined(CONFIG_MTD_PARTITIONS)
 196 /* MTD partitions */
 197 #define CONFIG_MTD_DEVICE       /* needed for mtdparts commands */
 198 #define CONFIG_FLASH_CFI_MTD
 199 #define MTDIDS_DEFAULT          "nor0=flash-0"
 200
 201 /* default mtd partition table */
 202 #define MTDPARTS_DEFAULT        "mtdparts=flash-0:256k(u-boot),"\
 203                                 "256k(env),3m(kernel),1m(romfs),"\
 204                                 "1m(cramfs),-(jffs2)"
 205 #endif
 206
 207 /* size of console buffer */
 208 #define CONFIG_SYS_CBSIZE       512
 209  /* print buffer size */
 210 #define CONFIG_SYS_PBSIZE \
 211                 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 212 /* max number of command args */
 213 #define CONFIG_SYS_MAXARGS      15
 214 #define CONFIG_SYS_LONGHELP
 215 /* default load address */
 216 #define CONFIG_SYS_LOAD_ADDR    0
 217
 218 #define CONFIG_BOOTARGS         "root=romfs"
 219 #define CONFIG_HOSTNAME         XILINX_BOARD_NAME
 220 #define CONFIG_BOOTCOMMAND      "base 0;tftp 11000000 image.img;bootm"
 221
 222 /* architecture dependent code */
 223 #define CONFIG_SYS_USR_EXCEP    /* user exception */
 224
 225 #define CONFIG_PREBOOT  "echo U-BOOT for ${hostname};setenv preboot;echo"
 226
 227 #ifndef CONFIG_EXTRA_ENV_SETTINGS
 228 #define CONFIG_EXTRA_ENV_SETTINGS       "unlock=yes\0" \
 229                                         "nor0=flash-0\0"\
 230                                         "mtdparts=mtdparts=flash-0:"\
 231                                         "256k(u-boot),256k(env),3m(kernel),"\
 232                                         "1m(romfs),1m(cramfs),-(jffs2)\0"\
 233                                         "nc=setenv stdout nc;"\
 234                                         "setenv stdin nc\0" \
 235                                         "serial=setenv stdout serial;"\
 236                                         "setenv stdin serial\0"
 237 #endif
 238
 239 #define CONFIG_CMDLINE_EDITING
 240
 241 /* Enable flat device tree support */
 242 #define CONFIG_LMB              1
 243
 244 #if defined(CONFIG_XILINX_AXIEMAC)
 245 # define CONFIG_MII             1
 246 # define CONFIG_PHY_GIGE        1
 247 # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN        1
 248 # define CONFIG_PHY_ATHEROS     1
 249 # define CONFIG_PHY_BROADCOM    1
 250 # define CONFIG_PHY_DAVICOM     1
 251 # define CONFIG_PHY_LXT         1
 252 # define CONFIG_PHY_MARVELL     1
 253 # define CONFIG_PHY_MICREL      1
 254 # define CONFIG_PHY_MICREL_KSZ9021
 255 # define CONFIG_PHY_NATSEMI     1
 256 # define CONFIG_PHY_REALTEK     1
 257 # define CONFIG_PHY_VITESSE     1
 258 #else
 259 # undef CONFIG_MII
 260 #endif
 261
 262 /* SPL part */
 263 #define CONFIG_CMD_SPL
 264 #define CONFIG_SPL_FRAMEWORK
 265
 266 #define CONFIG_SPL_LDSCRIPT     "arch/microblaze/cpu/u-boot-spl.lds"
 267
 268 #ifdef CONFIG_SYS_FLASH_BASE
 269 # define CONFIG_SYS_UBOOT_BASE          CONFIG_SYS_FLASH_BASE
 270 #endif
 271
 272 /* for booting directly linux */
 273
 274 #define CONFIG_SYS_FDT_BASE             (CONFIG_SYS_FLASH_BASE + \
 275                                          0x40000)
 276 #define CONFIG_SYS_FDT_SIZE             (16<<10)
 277 #define CONFIG_SYS_SPL_ARGS_ADDR        (CONFIG_SYS_TEXT_BASE + \
 278                                          0x1000000)
 279
 280 /* SP location before relocation, must use scratch RAM */
 281 /* BRAM start */
 282 #define CONFIG_SYS_INIT_RAM_ADDR        0x0
 283 /* BRAM size - will be generated */
 284 #define CONFIG_SYS_INIT_RAM_SIZE        0x100000
 285
 286 # define CONFIG_SPL_STACK_ADDR          (CONFIG_SYS_INIT_RAM_ADDR + \
 287                                          CONFIG_SYS_INIT_RAM_SIZE - \
 288                                          CONFIG_SYS_MALLOC_F_LEN)
 289
 290 /* Just for sure that there is a space for stack */
 291 #define CONFIG_SPL_STACK_SIZE           0x100
 292
 293 #define CONFIG_SYS_UBOOT_START          CONFIG_SYS_TEXT_BASE
 294
 295 #define CONFIG_SPL_MAX_FOOTPRINT        (CONFIG_SYS_INIT_RAM_SIZE - \
 296                                          CONFIG_SYS_INIT_RAM_ADDR - \
 297                                          CONFIG_SYS_MALLOC_F_LEN - \
 298                                          CONFIG_SPL_STACK_SIZE)
 299
 300 #endif  /* __CONFIG_H */