include/configs/omap3_evm_common.h

   1 /*
   2  * Common configuration settings for the TI OMAP3 EVM board.
   3  *
   4  * Copyright (C) 2006-2011 Texas Instruments Incorporated - http://www.ti.com/
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __OMAP3_EVM_COMMON_H
  10 #define __OMAP3_EVM_COMMON_H
  11
  12 /*
  13  * High level configuration options
  14  */
  15 #define CONFIG_OMAP                     /* This is TI OMAP core */
  16 #define CONFIG_OMAP_GPIO
  17 #define CONFIG_OMAP_COMMON
  18 /* Common ARM Erratas */
  19 #define CONFIG_ARM_ERRATA_454179
  20 #define CONFIG_ARM_ERRATA_430973
  21 #define CONFIG_ARM_ERRATA_621766
  22
  23 #define CONFIG_SDRC                     /* The chip has SDRC controller */
  24
  25 #define CONFIG_OMAP3_EVM                /* This is a OMAP3 EVM */
  26 #define CONFIG_TWL4030_POWER            /* with TWL4030 PMIC */
  27
  28 /*
  29  * Clock related definitions
  30  */
  31 #define V_OSCK                  26000000        /* Clock output from T2 */
  32 #define V_SCLK                  (V_OSCK >> 1)
  33
  34 /*
  35  * OMAP3 has 12 GP timers, they can be driven by the system clock
  36  * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
  37  * This rate is divided by a local divisor.
  38  */
  39 #define CONFIG_SYS_TIMERBASE            OMAP34XX_GPT2
  40 #define CONFIG_SYS_PTV                  2       /* Divisor: 2^(PTV+1) => 8 */
  41
  42 /* Size of environment - 128KB */
  43 #define CONFIG_ENV_SIZE                 (128 << 10)
  44
  45 /* Size of malloc pool */
  46 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + (128 << 10))
  47
  48 /*
  49  * Physical Memory Map
  50  * Note 1: CS1 may or may not be populated
  51  * Note 2: SDRAM size is expected to be at least 32MB
  52  */
  53 #define CONFIG_NR_DRAM_BANKS            2
  54 #define PHYS_SDRAM_1                    OMAP34XX_SDRC_CS0
  55 #define PHYS_SDRAM_2                    OMAP34XX_SDRC_CS1
  56
  57 /* Limits for memtest */
  58 #define CONFIG_SYS_MEMTEST_START        (OMAP34XX_SDRC_CS0)
  59 #define CONFIG_SYS_MEMTEST_END          (OMAP34XX_SDRC_CS0 + \
  60                                                 0x01F00000) /* 31MB */
  61
  62 /* Default load address */
  63 #define CONFIG_SYS_LOAD_ADDR            (OMAP34XX_SDRC_CS0)
  64
  65 /* -----------------------------------------------------------------------------
  66  * Hardware drivers
  67  * -----------------------------------------------------------------------------
  68  */
  69
  70 /*
  71  * NS16550 Configuration
  72  */
  73 #define V_NS16550_CLK                   48000000        /* 48MHz (APLL96/2) */
  74
  75 #define CONFIG_SYS_NS16550_SERIAL
  76 #define CONFIG_SYS_NS16550_REG_SIZE     (-4)
  77 #define CONFIG_SYS_NS16550_CLK          V_NS16550_CLK
  78
  79 /*
  80  * select serial console configuration
  81  */
  82 #define CONFIG_CONS_INDEX               1
  83 #define CONFIG_SERIAL1                  1       /* UART1 on OMAP3 EVM */
  84 #define CONFIG_SYS_NS16550_COM1         OMAP34XX_UART1
  85 #define CONFIG_BAUDRATE                 115200
  86 #define CONFIG_SYS_BAUDRATE_TABLE       {4800, 9600, 19200, 38400, 57600,\
  87                                         115200}
  88
  89 /*
  90  * I2C
  91  */
  92 #define CONFIG_SYS_I2C
  93 #define CONFIG_SYS_OMAP24_I2C_SPEED     100000
  94 #define CONFIG_SYS_OMAP24_I2C_SLAVE     1
  95 #define CONFIG_SYS_I2C_OMAP34XX
  96
  97 /*
  98  * PISMO support
  99  */
 100 /* Monitor at start of flash - Reserve 2 sectors */
 101 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_FLASH_BASE
 102
 103 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)
 104
 105 /* Start location & size of environment */
 106 #define ONENAND_ENV_OFFSET              0x260000
 107 #define SMNAND_ENV_OFFSET               0x260000
 108
 109 #define CONFIG_SYS_ENV_SECT_SIZE        (128 << 10)     /* 128 KiB */
 110
 111 /*
 112  * NAND
 113  */
 114 /* Physical address to access NAND */
 115 #define CONFIG_SYS_NAND_ADDR            NAND_BASE
 116
 117 /* Physical address to access NAND at CS0 */
 118 #define CONFIG_SYS_NAND_BASE            NAND_BASE
 119
 120 /* Max number of NAND devices */
 121 #define CONFIG_SYS_MAX_NAND_DEVICE      1
 122 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT
 123 /* Timeout values (in ticks) */
 124 #define CONFIG_SYS_FLASH_ERASE_TOUT     (100 * CONFIG_SYS_HZ)
 125 #define CONFIG_SYS_FLASH_WRITE_TOUT     (100 * CONFIG_SYS_HZ)
 126
 127 /* Flash banks JFFS2 should use */
 128 #define CONFIG_SYS_MAX_MTD_BANKS        (CONFIG_SYS_MAX_FLASH_BANKS + \
 129                                                 CONFIG_SYS_MAX_NAND_DEVICE)
 130
 131 #define CONFIG_SYS_JFFS2_MEM_NAND
 132 #define CONFIG_SYS_JFFS2_FIRST_BANK     CONFIG_SYS_MAX_FLASH_BANKS
 133 #define CONFIG_SYS_JFFS2_NUM_BANKS      1
 134
 135 #define CONFIG_JFFS2_NAND
 136 /* nand device jffs2 lives on */
 137 #define CONFIG_JFFS2_DEV                "nand0"
 138 /* Start of jffs2 partition */
 139 #define CONFIG_JFFS2_PART_OFFSET        0x680000
 140 /* Size of jffs2 partition */
 141 #define CONFIG_JFFS2_PART_SIZE          0xf980000
 142
 143 /*
 144  * USB
 145  */
 146 #ifdef CONFIG_USB_OMAP3
 147
 148 #ifdef CONFIG_USB_MUSB_HCD
 149 #define CONFIG_CMD_USB
 150
 151 #define CONFIG_USB_STORAGE
 152 #define CONGIG_CMD_STORAGE
 153 #define CONFIG_CMD_FAT
 154
 155 #ifdef CONFIG_USB_KEYBOARD
 156 #define CONFIG_SYS_USB_EVENT_POLL
 157 #define CONFIG_PREBOOT                  "usb start"
 158 #endif /* CONFIG_USB_KEYBOARD */
 159
 160 #endif /* CONFIG_USB_MUSB_HCD */
 161
 162 #ifdef CONFIG_USB_MUSB_UDC
 163 /* USB device configuration */
 164 #define CONFIG_USB_DEVICE
 165 #define CONFIG_USB_TTY
 166 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 167
 168 /* Change these to suit your needs */
 169 #define CONFIG_USBD_VENDORID            0x0451
 170 #define CONFIG_USBD_PRODUCTID           0x5678
 171 #define CONFIG_USBD_MANUFACTURER        "Texas Instruments"
 172 #define CONFIG_USBD_PRODUCT_NAME        "EVM"
 173 #endif /* CONFIG_USB_MUSB_UDC */
 174
 175 #endif /* CONFIG_USB_OMAP3 */
 176
 177 /* ----------------------------------------------------------------------------
 178  * U-boot features
 179  * ----------------------------------------------------------------------------
 180  */
 181 #define CONFIG_SYS_MAXARGS              16      /* max args for a command */
 182
 183 #define CONFIG_MISC_INIT_R
 184
 185 #define CONFIG_CMDLINE_TAG                      /* enable passing of ATAGs */
 186 #define CONFIG_SETUP_MEMORY_TAGS
 187 #define CONFIG_INITRD_TAG
 188 #define CONFIG_REVISION_TAG
 189
 190 /* Size of Console IO buffer */
 191 #define CONFIG_SYS_CBSIZE               512
 192
 193 /* Size of print buffer */
 194 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
 195                                                 sizeof(CONFIG_SYS_PROMPT) + 16)
 196
 197 /* Size of bootarg buffer */
 198 #define CONFIG_SYS_BARGSIZE             (CONFIG_SYS_CBSIZE)
 199
 200 #define CONFIG_BOOTFILE                 "uImage"
 201
 202 /*
 203  * NAND / OneNAND
 204  */
 205 #if defined(CONFIG_CMD_NAND)
 206 #define CONFIG_SYS_FLASH_BASE           NAND_BASE
 207
 208 #define CONFIG_NAND_OMAP_GPMC
 209 #define CONFIG_ENV_OFFSET               SMNAND_ENV_OFFSET
 210 #elif defined(CONFIG_CMD_ONENAND)
 211 #define CONFIG_SYS_FLASH_BASE           ONENAND_MAP
 212 #define CONFIG_SYS_ONENAND_BASE         ONENAND_MAP
 213 #endif
 214
 215 #if !defined(CONFIG_ENV_IS_NOWHERE)
 216 #if defined(CONFIG_CMD_NAND)
 217 #define CONFIG_ENV_IS_IN_NAND
 218 #elif defined(CONFIG_CMD_ONENAND)
 219 #define CONFIG_ENV_IS_IN_ONENAND
 220 #define CONFIG_ENV_OFFSET               ONENAND_ENV_OFFSET
 221 #endif
 222 #endif /* CONFIG_ENV_IS_NOWHERE */
 223
 224 #define CONFIG_ENV_ADDR                 CONFIG_ENV_OFFSET
 225
 226 #if defined(CONFIG_CMD_NET)
 227
 228 /* Ethernet (SMSC9115 from SMSC9118 family) */
 229 #define CONFIG_SMC911X
 230 #define CONFIG_SMC911X_32_BIT
 231 #define CONFIG_SMC911X_BASE             0x2C000000
 232
 233 /* BOOTP fields */
 234 #define CONFIG_BOOTP_SUBNETMASK         0x00000001
 235 #define CONFIG_BOOTP_GATEWAY            0x00000002
 236 #define CONFIG_BOOTP_HOSTNAME           0x00000004
 237 #define CONFIG_BOOTP_BOOTPATH           0x00000010
 238
 239 #endif /* CONFIG_CMD_NET */
 240
 241 /* Support for relocation */
 242 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
 243 #define CONFIG_SYS_INIT_RAM_ADDR        0x4020f800
 244 #define CONFIG_SYS_INIT_RAM_SIZE        0x800
 245 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_INIT_RAM_ADDR + \
 246                                          CONFIG_SYS_INIT_RAM_SIZE - \
 247                                          GENERATED_GBL_DATA_SIZE)
 248
 249 /* -----------------------------------------------------------------------------
 250  * Board specific
 251  * -----------------------------------------------------------------------------
 252  */
 253 #define CONFIG_SYS_NO_FLASH
 254
 255 /* Uncomment to define the board revision statically */
 256 /* #define CONFIG_STATIC_BOARD_REV      OMAP3EVM_BOARD_GEN_2 */
 257
 258 #define CONFIG_SYS_CACHELINE_SIZE       64
 259
 260 /* Defines for SPL */
 261 #define CONFIG_SPL_FRAMEWORK
 262 #define CONFIG_SPL_TEXT_BASE            0x40200800
 263 #define CONFIG_SPL_MAX_SIZE             (54 * 1024)     /* 8 KB for stack */
 264
 265 #define CONFIG_SPL_BSS_START_ADDR       0x80000000
 266 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000         /* 512 KB */
 267
 268 #define CONFIG_SPL_BOARD_INIT
 269 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 270 #define CONFIG_SPL_LIBDISK_SUPPORT
 271 #define CONFIG_SPL_I2C_SUPPORT
 272 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 273 #define CONFIG_SPL_SERIAL_SUPPORT
 274 #define CONFIG_SPL_POWER_SUPPORT
 275 #define CONFIG_SPL_OMAP3_ID_NAND
 276 #define CONFIG_SPL_LDSCRIPT             "$(CPUDIR)/omap-common/u-boot-spl.lds"
 277
 278 /*
 279  * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
 280  * 64 bytes before this address should be set aside for u-boot.img's
 281  * header. That is 0x800FFFC0--0x80100000 should not be used for any
 282  * other needs.
 283  */
 284 #define CONFIG_SYS_TEXT_BASE            0x80100000
 285 #define CONFIG_SYS_SPL_MALLOC_START     0x80208000
 286 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000
 287
 288 #endif /* __OMAP3_EVM_COMMON_H */