include/configs/qemu-mips64.h

   1 /*
   2  * (C) Copyright 2003
   3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 /*
   9  * This file contains the configuration parameters for qemu-mips64 target.
  10  */
  11
  12 #ifndef __CONFIG_H
  13 #define __CONFIG_H
  14
  15 #define CONFIG_QEMU_MIPS
  16
  17 #define CONFIG_DISPLAY_BOARDINFO
  18 #define CONFIG_MISC_INIT_R
  19
  20 #define CONFIG_BOOTDELAY        10      /* autoboot after 10 seconds */
  21
  22 #define CONFIG_BAUDRATE         115200
  23
  24 #define CONFIG_TIMESTAMP                /* Print image info with timestamp */
  25 #undef CONFIG_BOOTARGS
  26
  27 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
  28         "addmisc=setenv bootargs ${bootargs} "                          \
  29                 "console=ttyS0,${baudrate} "                            \
  30                 "panic=1\0"                                             \
  31         "bootfile=/tftpboot/vmlinux\0"                                  \
  32         "load=tftp ffffffff80500000 ${u-boot}\0"                        \
  33         ""
  34
  35 #define CONFIG_BOOTCOMMAND      "bootp;bootelf"
  36
  37 /*
  38  * BOOTP options
  39  */
  40 #define CONFIG_BOOTP_BOOTFILESIZE
  41 #define CONFIG_BOOTP_BOOTPATH
  42 #define CONFIG_BOOTP_GATEWAY
  43 #define CONFIG_BOOTP_HOSTNAME
  44
  45 /*
  46  * Command line configuration.
  47  */
  48 #define CONFIG_CMD_FAT
  49 #define CONFIG_CMD_EXT2
  50 #define CONFIG_CMD_DHCP
  51
  52 #define CONFIG_DRIVER_NE2000
  53 #define CONFIG_DRIVER_NE2000_BASE       0xffffffffb4000300
  54
  55 #define CONFIG_SYS_NS16550_SERIAL
  56 #define CONFIG_SYS_NS16550_REG_SIZE     1
  57 #define CONFIG_SYS_NS16550_CLK          115200
  58 #define CONFIG_SYS_NS16550_COM1         0xffffffffb40003f8
  59 #define CONFIG_CONS_INDEX               1
  60
  61 #define CONFIG_CMD_IDE
  62 #define CONFIG_DOS_PARTITION
  63
  64 #define CONFIG_SYS_IDE_MAXBUS           2
  65 #define CONFIG_SYS_ATA_IDE0_OFFSET      0x1f0
  66 #define CONFIG_SYS_ATA_IDE1_OFFSET      0x170
  67 #define CONFIG_SYS_ATA_DATA_OFFSET      0
  68 #define CONFIG_SYS_ATA_REG_OFFSET       0
  69 #define CONFIG_SYS_ATA_BASE_ADDR        0xffffffffb4000000
  70
  71 #define CONFIG_SYS_IDE_MAXDEVICE        4
  72
  73 #define CONFIG_CMD_RARP
  74
  75 /*
  76  * Miscellaneous configurable options
  77  */
  78 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
  79
  80 /* Monitor Command Prompt */
  81 #undef CONFIG_SYS_PROMPT
  82 #if defined(CONFIG_SYS_LITTLE_ENDIAN)
  83 #define CONFIG_SYS_PROMPT               "qemu-mips64el # "
  84 #else
  85 #define CONFIG_SYS_PROMPT               "qemu-mips64 # "
  86 #endif
  87
  88 #define CONFIG_AUTO_COMPLETE
  89 #define CONFIG_CMDLINE_EDITING
  90
  91 /* Console I/O Buffer Size */
  92 #define CONFIG_SYS_CBSIZE               256
  93 /* Print Buffer Size */
  94 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
  95 /* max number of command args */
  96 #define CONFIG_SYS_MAXARGS              16
  97
  98 #define CONFIG_SYS_MALLOC_LEN           128*1024
  99
 100 #define CONFIG_SYS_BOOTPARAMS_LEN       128*1024
 101
 102 #define CONFIG_SYS_MHZ                  132
 103
 104 #define CONFIG_SYS_MIPS_TIMER_FREQ      (CONFIG_SYS_MHZ * 1000000)
 105
 106 /* Cached addr */
 107 #define CONFIG_SYS_SDRAM_BASE           0xffffffff80000000
 108
 109 /* default load address */
 110 #define CONFIG_SYS_LOAD_ADDR            0xffffffff81000000
 111
 112 #define CONFIG_SYS_MEMTEST_START        0xffffffff80100000
 113 #define CONFIG_SYS_MEMTEST_END          0xffffffff80800000
 114
 115 /*-----------------------------------------------------------------------
 116  * FLASH and environment organization
 117  */
 118 /* The following #defines are needed to get flash environment right */
 119 #define CONFIG_SYS_TEXT_BASE            0xffffffffbfc00000 /* Rom version */
 120 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
 121 #define CONFIG_SYS_MONITOR_LEN          (192 << 10)
 122
 123 #define CONFIG_SYS_INIT_SP_OFFSET       0x400000
 124
 125 /* We boot from this flash, selected with dip switch */
 126 #define CONFIG_SYS_FLASH_BASE           0xffffffffbfc00000
 127 #define CONFIG_SYS_MAX_FLASH_BANKS      1
 128 #define CONFIG_SYS_MAX_FLASH_SECT       128
 129 #define CONFIG_SYS_FLASH_CFI
 130 #define CONFIG_FLASH_CFI_DRIVER
 131 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 132
 133 #define CONFIG_ENV_IS_IN_FLASH
 134 #define CONFIG_ENV_ADDR         (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
 135
 136 /* Address and size of Primary Environment Sector */
 137 #define CONFIG_ENV_SIZE         0x8000
 138
 139 #define CONFIG_ENV_OVERWRITE    1
 140
 141 #define MEM_SIZE                128
 142
 143 #define CONFIG_LZMA
 144
 145 /*-----------------------------------------------------------------------
 146  * Cache Configuration
 147  */
 148 #define CONFIG_SYS_DCACHE_SIZE          16384
 149 #define CONFIG_SYS_ICACHE_SIZE          16384
 150 #define CONFIG_SYS_CACHELINE_SIZE       32
 151
 152 #endif /* __CONFIG_H */