include/configs/siemens-am33x-common.h

   1 /*
   2  * siemens am33x common board options
   3  * (C) Copyright 2013 Siemens Schweiz AG
   4  * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
   5  *
   6  * Based on:
   7  * U-Boot file:/include/configs/am335x_evm.h
   8  *
   9  * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
  10  *
  11  * SPDX-License-Identifier:     GPL-2.0+
  12  */
  13
  14 #ifndef __CONFIG_SIEMENS_AM33X_COMMON_H
  15 #define __CONFIG_SIEMENS_AM33X_COMMON_H
  16
  17 #include <asm/arch/omap.h>
  18
  19 #define CONFIG_DMA_COHERENT
  20 #define CONFIG_DMA_COHERENT_SIZE        (1 << 20)
  21
  22 #define CONFIG_ENV_SIZE                 (0x2000)
  23 #define CONFIG_SYS_MALLOC_LEN           (16 * 1024 * 1024)
  24 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
  25 #ifdef CONFIG_SIEMENS_MACH_TYPE
  26 #define CONFIG_MACH_TYPE                CONFIG_SIEMENS_MACH_TYPE
  27 #endif
  28
  29 #define CONFIG_CMDLINE_TAG              /* enable passing of ATAGs */
  30 #define CONFIG_SETUP_MEMORY_TAGS
  31 #define CONFIG_INITRD_TAG
  32
  33 /* commands to include */
  34
  35 #define CONFIG_ENV_VARS_UBOOT_CONFIG
  36 #ifndef CONFIG_SPL_BUILD
  37 #define CONFIG_ROOTPATH         "/opt/eldk"
  38 #endif
  39
  40 #define CONFIG_ENV_OVERWRITE            1
  41
  42 #define CONFIG_SYS_LONGHELP
  43 #define CONFIG_CMDLINE_EDITING
  44 #define CONFIG_AUTO_COMPLETE
  45 #define CONFIG_SYS_AUTOLOAD     "yes"
  46
  47 /* Clock Defines */
  48 #define V_OSCK                          24000000  /* Clock output from T2 */
  49 #define V_SCLK                          (V_OSCK)
  50
  51 /* We set the max number of command args high to avoid HUSH bugs. */
  52 #define CONFIG_SYS_MAXARGS              32
  53
  54 /* Console I/O Buffer Size */
  55 #define CONFIG_SYS_CBSIZE               1024
  56
  57 /* Boot Argument Buffer Size */
  58 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
  59
  60 /*
  61  * memtest works on 8 MB in DRAM after skipping 32MB from
  62  * start addr of ram disk
  63  */
  64 #define CONFIG_SYS_MEMTEST_START        (PHYS_DRAM_1 + (64 * 1024 * 1024))
  65 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START \
  66                                         + (8 * 1024 * 1024))
  67
  68 #define CONFIG_SYS_LOAD_ADDR            0x81000000 /* Default load address */
  69
  70 #define CONFIG_SPI
  71 #define CONFIG_MTD_DEVICE
  72 #define CONFIG_SF_DEFAULT_SPEED         (75000000)
  73
  74  /* Physical Memory Map */
  75 #define CONFIG_NR_DRAM_BANKS            1               /*  1 bank of DRAM */
  76 #define PHYS_DRAM_1                     0x80000000      /* DRAM Bank #1 */
  77
  78 #define CONFIG_SYS_SDRAM_BASE           PHYS_DRAM_1
  79 #define CONFIG_SYS_INIT_SP_ADDR         (NON_SECURE_SRAM_END - \
  80                                                 GENERATED_GBL_DATA_SIZE)
  81  /* Platform/Board specific defs */
  82 #define CONFIG_SYS_TIMERBASE            0x48040000      /* Use Timer2 */
  83 #define CONFIG_SYS_PTV                  2       /* Divisor: 2^(PTV+1) => 8 */
  84
  85 /* NS16550 Configuration */
  86 #ifdef CONFIG_SPL_BUILD
  87 #define CONFIG_SYS_NS16550_SERIAL
  88 #define CONFIG_SYS_NS16550_REG_SIZE     (-4)
  89 #endif
  90 #define CONFIG_SYS_NS16550_CLK          (48000000)
  91 #define CONFIG_SYS_NS16550_COM1         0x44e09000
  92 #define CONFIG_SYS_NS16550_COM4         0x481a6000
  93
  94 #define CONFIG_SERIAL1                  1
  95 #define CONFIG_CONS_INDEX               1
  96
  97 /* I2C Configuration */
  98 #define CONFIG_I2C
  99 #define CONFIG_SYS_I2C
 100
 101 /* Defines for SPL */
 102 #define CONFIG_SPL_TEXT_BASE            0x402F0400
 103 #define CONFIG_SPL_MAX_SIZE             (SRAM_SCRATCH_SPACE_ADDR - \
 104                                          CONFIG_SPL_TEXT_BASE)
 105
 106 #define CONFIG_SPL_BSS_START_ADDR       0x80000000
 107 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000         /* 512 KB */
 108
 109 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION      1
 110 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
 111
 112 #define CONFIG_SPL_SPI_LOAD
 113 #define CONFIG_SYS_SPI_U_BOOT_OFFS      0x20000
 114
 115 #define CONFIG_SPL_NAND_BASE
 116 #define CONFIG_SPL_NAND_DRIVERS
 117 #define CONFIG_SPL_NAND_ECC
 118 #define CONFIG_SYS_NAND_ONFI_DETECTION
 119 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 120 #define CONFIG_SYS_NAND_PAGE_COUNT      (CONFIG_SYS_NAND_BLOCK_SIZE / \
 121                                          CONFIG_SYS_NAND_PAGE_SIZE)
 122 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
 123 #define CONFIG_SYS_NAND_OOBSIZE         64
 124 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128*1024)
 125 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   NAND_LARGE_BADBLOCK_POS
 126 #define CONFIG_SYS_NAND_ECCPOS          { 2, 3, 4, 5, 6, 7, 8, 9, \
 127                                          10, 11, 12, 13, 14, 15, 16, 17, \
 128                                          18, 19, 20, 21, 22, 23, 24, 25, \
 129                                          26, 27, 28, 29, 30, 31, 32, 33, \
 130                                          34, 35, 36, 37, 38, 39, 40, 41, \
 131                                          42, 43, 44, 45, 46, 47, 48, 49, \
 132                                          50, 51, 52, 53, 54, 55, 56, 57, }
 133
 134 #define CONFIG_SYS_NAND_ECCSIZE         512
 135 #define CONFIG_SYS_NAND_ECCBYTES        14
 136 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_BCH8_CODE_HW
 137
 138 #define CONFIG_SYS_NAND_ECCSTEPS        4
 139 #define CONFIG_SYS_NAND_ECCTOTAL        (CONFIG_SYS_NAND_ECCBYTES * \
 140                                                 CONFIG_SYS_NAND_ECCSTEPS)
 141
 142 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
 143
 144 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x80000
 145
 146 /*
 147  * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
 148  * 64 bytes before this address should be set aside for u-boot.img's
 149  * header. That is 0x800FFFC0--0x80100000 should not be used for any
 150  * other needs.
 151  */
 152 #define CONFIG_SYS_SPL_MALLOC_START     0x80208000
 153 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000
 154
 155 /*
 156  * Since SPL did pll and ddr initialization for us,
 157  * we don't need to do it twice.
 158  */
 159 #ifndef CONFIG_SPL_BUILD
 160 #define CONFIG_SKIP_LOWLEVEL_INIT
 161 #endif
 162
 163 #ifndef CONFIG_SPL_BUILD
 164 /*
 165  * USB configuration
 166  */
 167 #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
 168
 169 #define CONFIG_AM335X_USB0
 170 #define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL
 171 #define CONFIG_AM335X_USB1
 172 #define CONFIG_AM335X_USB1_MODE MUSB_HOST
 173
 174 /* USB DRACO ID as default */
 175 #define CONFIG_USBD_HS
 176
 177 /* USB Device Firmware Update support */
 178 #define CONFIG_SYS_DFU_DATA_BUF_SIZE    (1 << 20)
 179 #define DFU_MANIFEST_POLL_TIMEOUT       25000
 180
 181 #endif /* CONFIG_SPL_BUILD */
 182
 183 /*
 184  * Default to using SPI for environment, etc.  We have multiple copies
 185  * of SPL as the ROM will check these locations.
 186  * 0x0 - 0x20000 : First copy of SPL
 187  * 0x20000 - 0x40000 : Second copy of SPL
 188  * 0x40000 - 0x60000 : Third copy of SPL
 189  * 0x60000 - 0x80000 : Fourth copy of SPL
 190  * 0x80000 - 0xDF000 : U-Boot
 191  * 0xDF000 - 0xE0000 : U-Boot Environment
 192  * 0xE0000 - 0x442000 : Linux Kernel
 193  * 0x442000 - 0x800000 : Userland
 194  */
 195 #if defined(CONFIG_SPI_BOOT)
 196 # define CONFIG_ENV_SPI_MAX_HZ          CONFIG_SF_DEFAULT_SPEED
 197 # define CONFIG_ENV_OFFSET              (892 << 10) /* 892 KiB in */
 198 # define CONFIG_ENV_SECT_SIZE           (4 << 10) /* 4 KB sectors */
 199 #endif /* SPI support */
 200
 201 #define CONFIG_DRIVER_TI_CPSW
 202 #define CONFIG_MII
 203 #define CONFIG_BOOTP_DEFAULT
 204 #define CONFIG_BOOTP_DNS
 205 #define CONFIG_BOOTP_DNS2
 206 #define CONFIG_BOOTP_SEND_HOSTNAME
 207 #define CONFIG_BOOTP_GATEWAY
 208 #define CONFIG_BOOTP_SUBNETMASK
 209 #define CONFIG_NET_RETRY_COUNT         10
 210
 211 /* NAND support */
 212 #ifdef CONFIG_NAND
 213 /* UBI Support */
 214 #ifndef CONFIG_SPL_BUILD
 215 #define CONFIG_MTD_PARTITIONS
 216 #define CONFIG_MTD_DEVICE
 217 #endif
 218
 219 /* Commen environment */
 220 #define CONFIG_PREBOOT
 221 #define COMMON_ENV_DFU_ARGS     "dfu_args=run bootargs_defaults;" \
 222                                 "setenv bootargs ${bootargs};" \
 223                                 "mtdparts default;" \
 224                                 "draco_led 1;" \
 225                                 "dfu 0 nand 0;" \
 226                                 "draco_led 0;\0" \
 227
 228 #define COMMON_ENV_NAND_BOOT \
 229                 "nand_boot=echo Booting from nand; " \
 230                 "if test ${upgrade_available} -eq 1; then " \
 231                         "if test ${bootcount} -gt ${bootlimit}; " \
 232                                 "then " \
 233                                 "setenv upgrade_available 0;" \
 234                                 "setenv ${partitionset_active} true;" \
 235                                 "if test -n ${A}; then " \
 236                                         "setenv partitionset_active B; " \
 237                                         "env delete A; " \
 238                                 "fi;" \
 239                                 "if test -n ${B}; then " \
 240                                         "setenv partitionset_active A; " \
 241                                         "env delete B; " \
 242                                 "fi;" \
 243                                 "saveenv; " \
 244                         "fi;" \
 245                 "fi;" \
 246                 "echo set ${partitionset_active}...;" \
 247                 "run nand_args; "
 248
 249 #define COMMON_ENV_NAND_CMDS    "flash_self=run nand_boot\0" \
 250                                 "flash_self_test=setenv testargs test; " \
 251                                         "run nand_boot\0" \
 252                                 "dfu_start=echo Preparing for dfu mode ...; " \
 253                                 "run dfu_args; \0"
 254
 255 #define COMMON_ENV_SETTINGS \
 256         "verify=no \0" \
 257         "project_dir=targetdir\0" \
 258         "upgrade_available=0\0" \
 259         "altbootcmd=run bootcmd\0" \
 260         "bootlimit=3\0" \
 261         "partitionset_active=A\0" \
 262         "loadaddr=0x82000000\0" \
 263         "kloadaddr=0x81000000\0" \
 264         "script_addr=0x81900000\0" \
 265         "console=console=ttyMTD,mtdoops console=ttyO0,115200n8 panic=5\0" \
 266         "nfsopts=nolock rw\0" \
 267         "ip_method=none\0" \
 268         "bootenv=uEnv.txt\0" \
 269         "bootargs_defaults=setenv bootargs " \
 270                 "console=${console} " \
 271                 "${testargs} " \
 272                 "${optargs}\0" \
 273         "siemens_help=echo; "\
 274                 "echo Type 'run flash_self' to use kernel and root " \
 275                 "filesystem on memory; echo Type 'run flash_self_test' to " \
 276                 "use kernel and root filesystem on memory, boot in test " \
 277                 "mode; echo Not ready yet: 'run flash_nfs' to use kernel " \
 278                 "from memory and root filesystem over NFS; echo Type " \
 279                 "'run net_nfs' to get Kernel over TFTP and mount root " \
 280                 "filesystem over NFS; " \
 281                 "echo Set partitionset_active variable to 'A' " \
 282                 "or 'B' to select kernel and rootfs partition; " \
 283                 "echo" \
 284                 "\0"
 285
 286 /*
 287  * Variant 1 partition layout
 288  * chip-size = 256MiB
 289  *|         name |        size |           address area |
 290  *-------------------------------------------------------
 291  *|          spl | 128.000 KiB | 0x       0..0x   1ffff |
 292  *|  spl.backup1 | 128.000 KiB | 0x   20000..0x   3ffff |
 293  *|  spl.backup2 | 128.000 KiB | 0x   40000..0x   5ffff |
 294  *|  spl.backup3 | 128.000 KiB | 0x   60000..0x   7ffff |
 295  *|       u-boot |   1.875 MiB | 0x   80000..0x  25ffff |
 296  *|    uboot.env | 128.000 KiB | 0x  260000..0x  27ffff |
 297  *|     kernel_a |   5.000 MiB | 0x  280000..0x  77ffff |
 298  *|     kernel_b |   5.000 MiB | 0x  780000..0x  c7ffff |
 299  *|      mtdoops |   8.000 MiB | 0x  c80000..0x 147ffff |
 300  *|       rootfs | 235.500 MiB | 0x 1480000..0x fffffff |
 301  *-------------------------------------------------------
 302
 303                                         "mtdparts=omap2-nand.0:" \
 304                                         "128k(spl),"            \
 305                                         "128k(spl.backup1),"    \
 306                                         "128k(spl.backup2),"    \
 307                                         "128k(spl.backup3),"    \
 308                                         "1920k(u-boot),"        \
 309                                         "128k(uboot.env),"      \
 310                                         "5120k(kernel_a),"      \
 311                                         "5120k(kernel_b),"      \
 312                                         "8192k(mtdoops),"       \
 313                                         "-(rootfs)"
 314  */
 315
 316 #define DFU_ALT_INFO_NAND_V1 \
 317         "spl part 0 1;" \
 318         "spl.backup1 part 0 2;" \
 319         "spl.backup2 part 0 3;" \
 320         "spl.backup3 part 0 4;" \
 321         "u-boot part 0 5;" \
 322         "u-boot.env part 0 6;" \
 323         "kernel_a part 0 7;" \
 324         "kernel_b part 0 8;" \
 325         "rootfs partubi 0 10"
 326
 327 #define CONFIG_ENV_SETTINGS_NAND_V1 \
 328         "nand_active_ubi_vol=rootfs_a\0" \
 329         "nand_active_ubi_vol_A=rootfs_a\0" \
 330         "nand_active_ubi_vol_B=rootfs_b\0" \
 331         "nand_root_fs_type=ubifs rootwait=1\0" \
 332         "nand_src_addr=0x280000\0" \
 333         "nand_src_addr_A=0x280000\0" \
 334         "nand_src_addr_B=0x780000\0" \
 335         "nand_args=run bootargs_defaults;" \
 336                 "mtdparts default;" \
 337                 "setenv ${partitionset_active} true;" \
 338                 "if test -n ${A}; then " \
 339                         "setenv nand_active_ubi_vol ${nand_active_ubi_vol_A};" \
 340                         "setenv nand_src_addr ${nand_src_addr_A};" \
 341                 "fi;" \
 342                 "if test -n ${B}; then " \
 343                         "setenv nand_active_ubi_vol ${nand_active_ubi_vol_B};" \
 344                         "setenv nand_src_addr ${nand_src_addr_B};" \
 345                 "fi;" \
 346                 "setenv nand_root ubi0:${nand_active_ubi_vol} rw " \
 347                 "ubi.mtd=9,${ubi_off};" \
 348                 "setenv bootargs ${bootargs} " \
 349                 "root=${nand_root} noinitrd ${mtdparts} " \
 350                 "rootfstype=${nand_root_fs_type} ip=${ip_method} " \
 351                 "console=ttyMTD,mtdoops console=ttyO0,115200n8 mtdoops.mtddev" \
 352                 "=mtdoops\0" \
 353         COMMON_ENV_DFU_ARGS \
 354                 "dfu_alt_info=" DFU_ALT_INFO_NAND_V1 "\0" \
 355         COMMON_ENV_NAND_BOOT \
 356                 "nand read.i ${kloadaddr} ${nand_src_addr} " \
 357                 "${nand_img_size}; bootm ${kloadaddr}\0" \
 358         COMMON_ENV_NAND_CMDS
 359
 360 #define CONFIG_ENV_SETTINGS_V1 \
 361                 COMMON_ENV_SETTINGS \
 362         "net_args=run bootargs_defaults;" \
 363                 "mtdparts default;" \
 364                 "setenv bootfile ${project_dir}/kernel/uImage;" \
 365                 "setenv rootpath /home/projects/${project_dir}/rootfs;" \
 366                 "setenv bootargs ${bootargs} " \
 367                 "root=/dev/nfs ${mtdparts} " \
 368                 "nfsroot=${serverip}:${rootpath},${nfsopts} " \
 369                 "ip=${ipaddr}:${serverip}:" \
 370                 "${gatewayip}:${netmask}:${hostname}:eth0:off\0" \
 371         "net_nfs=echo Booting from network ...; " \
 372                 "run net_args; " \
 373                 "tftpboot ${kloadaddr} ${serverip}:${bootfile}; " \
 374                 "bootm ${kloadaddr}\0"
 375
 376 /*
 377  * Variant 2 partition layout (default)
 378  * chip-size = 256MiB or 512 MiB
 379  *|         name |        size |           address area |
 380  *-------------------------------------------------------
 381  *|          spl | 128.000 KiB | 0x       0..0x   1ffff |
 382  *|  spl.backup1 | 128.000 KiB | 0x   20000..0x   3ffff |
 383  *|  spl.backup2 | 128.000 KiB | 0x   40000..0x   5ffff |
 384  *|  spl.backup3 | 128.000 KiB | 0x   60000..0x   7ffff |
 385  *|       u-boot |   1.875 MiB | 0x   80000..0x  25ffff |
 386  *|   uboot.env0 | 512.000 KiB | 0x  260000..0x  2Dffff |
 387  *|   uboot.env1 | 512.000 KiB | 0x  2E0000..0x  35ffff |
 388  *|      mtdoops | 512.000 KiB | 0x  360000..0x  3dffff |
 389  *| (256) rootfs | 252.125 MiB | 0x  3E0000..0x fffffff |
 390  *| (512) rootfs | 508.125 MiB | 0x  3E0000..0x1fffffff |
 391  *-------------------------------------------------------
 392  */
 393
 394 #define DFU_ALT_INFO_NAND_V2 \
 395         "spl part 0 1;" \
 396         "spl.backup1 part 0 2;" \
 397         "spl.backup2 part 0 3;" \
 398         "spl.backup3 part 0 4;" \
 399         "u-boot part 0 5;" \
 400         "u-boot.env0 part 0 6;" \
 401         "u-boot.env1 part 0 7;" \
 402         "rootfs partubi 0 9" \
 403
 404 #define CONFIG_ENV_SETTINGS_NAND_V2 \
 405         "nand_active_ubi_vol=rootfs_a\0" \
 406         "rootfs_name=rootfs\0" \
 407         "kernel_name=uImage\0"\
 408         "nand_root_fs_type=ubifs rootwait=1\0" \
 409         "nand_args=run bootargs_defaults;" \
 410                 "mtdparts default;" \
 411                 "setenv ${partitionset_active} true;" \
 412                 "if test -n ${A}; then " \
 413                         "setenv nand_active_ubi_vol ${rootfs_name}_a;" \
 414                 "fi;" \
 415                 "if test -n ${B}; then " \
 416                         "setenv nand_active_ubi_vol ${rootfs_name}_b;" \
 417                 "fi;" \
 418                 "setenv nand_root ubi0:${nand_active_ubi_vol} rw " \
 419                 "ubi.mtd=rootfs,2048;" \
 420                 "setenv bootargs ${bootargs} " \
 421                 "root=${nand_root} noinitrd ${mtdparts} " \
 422                 "rootfstype=${nand_root_fs_type} ip=${ip_method} " \
 423                 "console=ttyMTD,mtdoops console=ttyO0,115200n8 mtdoops.mtddev" \
 424                 "=mtdoops\0" \
 425         COMMON_ENV_DFU_ARGS \
 426                 "dfu_alt_info=" DFU_ALT_INFO_NAND_V2 "\0" \
 427         COMMON_ENV_NAND_BOOT \
 428                 "ubi part rootfs ${ubi_off};" \
 429                 "ubifsmount ubi0:${nand_active_ubi_vol};" \
 430                 "ubifsload ${kloadaddr} boot/${kernel_name};" \
 431                 "ubifsload ${loadaddr} boot/${dtb_name}.dtb;" \
 432                 "bootm ${kloadaddr} - ${loadaddr}\0" \
 433         "nand_boot_backup=ubifsload ${loadaddr} boot/am335x-draco.dtb;" \
 434                 "bootm ${kloadaddr} - ${loadaddr}\0" \
 435         COMMON_ENV_NAND_CMDS
 436
 437 #define CONFIG_ENV_SETTINGS_V2 \
 438                 COMMON_ENV_SETTINGS \
 439         "net_args=run bootargs_defaults;" \
 440                 "mtdparts default;" \
 441                 "setenv bootfile ${project_dir}/kernel/uImage;" \
 442                 "setenv bootdtb ${project_dir}/kernel/dtb;" \
 443                 "setenv rootpath /home/projects/${project_dir}/rootfs;" \
 444                 "setenv bootargs ${bootargs} " \
 445                 "root=/dev/nfs ${mtdparts} " \
 446                 "nfsroot=${serverip}:${rootpath},${nfsopts} " \
 447                 "ip=${ipaddr}:${serverip}:" \
 448                 "${gatewayip}:${netmask}:${hostname}:eth0:off\0" \
 449         "net_nfs=echo Booting from network ...; " \
 450                 "run net_args; " \
 451                 "tftpboot ${kloadaddr} ${serverip}:${bootfile}; " \
 452                 "tftpboot ${loadaddr} ${serverip}:${bootdtb}; " \
 453                 "bootm ${kloadaddr} - ${loadaddr}\0"
 454
 455 /*
 456  * Variant 3 partition layout
 457  * chip-size = 512MiB
 458  *|         name |        size |           address area |
 459  *-------------------------------------------------------
 460  *|          spl | 128.000 KiB | 0x       0..0x   1ffff |
 461  *|  spl.backup1 | 128.000 KiB | 0x   20000..0x   3ffff |
 462  *|  spl.backup2 | 128.000 KiB | 0x   40000..0x   5ffff |
 463  *|  spl.backup3 | 128.000 KiB | 0x   60000..0x   7ffff |
 464  *|       u-boot |   1.875 MiB | 0x   80000..0x  25ffff |
 465  *|   uboot.env0 | 512.000 KiB | 0x  260000..0x  2Dffff |
 466  *|   uboot.env1 | 512.000 KiB | 0x  2E0000..0x  35ffff |
 467  *|       rootfs | 300.000 MiB | 0x  360000..0x12f5ffff |
 468  *|      mtdoops | 512.000 KiB | 0x12f60000..0x12fdffff |
 469  *|configuration | 104.125 MiB | 0x12fe0000..0x1fffffff |
 470  *-------------------------------------------------------
 471
 472                                         "mtdparts=omap2-nand.0:" \
 473                                         "128k(spl),"            \
 474                                         "128k(spl.backup1),"    \
 475                                         "128k(spl.backup2),"    \
 476                                         "128k(spl.backup3),"    \
 477                                         "1920k(u-boot),"        \
 478                                         "512k(u-boot.env0),"    \
 479                                         "512k(u-boot.env1),"    \
 480                                         "300m(rootfs),"         \
 481                                         "512k(mtdoops),"        \
 482                                         "-(configuration)"
 483
 484  */
 485
 486 #define CONFIG_SYS_NAND_BASE            (0x08000000)    /* physical address */
 487                                                         /* to access nand at */
 488                                                         /* CS0 */
 489 #define CONFIG_SYS_MAX_NAND_DEVICE      1               /* Max number of NAND
 490                                                            devices */
 491 #if !defined(CONFIG_SPI_BOOT)
 492 #define CONFIG_ENV_OFFSET               0x260000 /* environment starts here */
 493 #define CONFIG_SYS_ENV_SECT_SIZE        (128 << 10)     /* 128 KiB */
 494 #endif
 495 #endif
 496
 497 /* Reboot after 60 sec if bootcmd fails */
 498 #define CONFIG_RESET_TO_RETRY
 499 #define CONFIG_BOOT_RETRY_TIME 60
 500
 501 #define CONFIG_BOOTCOUNT_ENV
 502
 503 #endif  /* ! __CONFIG_SIEMENS_AM33X_COMMON_H */