include/configs/socfpga_sr1500.h

   1 /*
   2  * Copyright (C) 2015 Stefan Roese <sr@denx.de>
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6 #ifndef __CONFIG_SOCFPGA_SR1500_H__
   7 #define __CONFIG_SOCFPGA_SR1500_H__
   8
   9 #include <asm/arch/base_addr_ac5.h>
  10
  11 /* Memory configurations */
  12 #define PHYS_SDRAM_1_SIZE               0x40000000      /* 1GiB on SR1500 */
  13
  14 /* Booting Linux */
  15 #define CONFIG_LOADADDR         0x01000000
  16 #define CONFIG_SYS_LOAD_ADDR    CONFIG_LOADADDR
  17
  18 /* Ethernet on SoC (EMAC) */
  19 #define CONFIG_PHY_INTERFACE_MODE       PHY_INTERFACE_MODE_RGMII
  20 /* The PHY is autodetected, so no MII PHY address is needed here */
  21 #define CONFIG_PHY_MARVELL
  22 #define PHY_ANEG_TIMEOUT        8000
  23
  24 /* Environment */
  25
  26 /* Enable SPI NOR flash reset, needed for SPI booting */
  27 #define CONFIG_SPI_N25Q256A_RESET
  28
  29 /*
  30  * Bootcounter
  31  */
  32 /* last 2 lwords in OCRAM */
  33 #define CONFIG_SYS_BOOTCOUNT_ADDR       0xfffffff8
  34 #define CONFIG_SYS_BOOTCOUNT_BE
  35
  36 /* Environment setting for SPI flash */
  37 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
  38 #define CONFIG_ENV_SECT_SIZE    (64 * 1024)
  39 #define CONFIG_ENV_SIZE         (16 * 1024)
  40 #define CONFIG_ENV_OFFSET       0x000e0000
  41 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SECT_SIZE)
  42 #define CONFIG_ENV_SPI_BUS      0
  43 #define CONFIG_ENV_SPI_CS       0
  44 #define CONFIG_ENV_SPI_MODE     SPI_MODE_3
  45 #define CONFIG_ENV_SPI_MAX_HZ   100000000       /* Use max of 100MHz */
  46 #define CONFIG_SF_DEFAULT_SPEED 100000000
  47
  48 /*
  49  * The QSPI NOR flash layout on SR1500:
  50  *
  51  * 0000.0000 - 0003.ffff: SPL (4 times)
  52  * 0004.0000 - 000d.ffff: U-Boot
  53  * 000e.0000 - 000e.ffff: env1
  54  * 000f.0000 - 000f.ffff: env2
  55  */
  56
  57 /* The rest of the configuration is shared */
  58 #include <configs/socfpga_common.h>
  59
  60 #endif  /* __CONFIG_SOCFPGA_SR1500_H__ */