include/configs/theadorable.h

   1 /*
   2  * Copyright (C) 2015-2016 Stefan Roese <sr@denx.de>
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6
   7 #ifndef _CONFIG_THEADORABLE_H
   8 #define _CONFIG_THEADORABLE_H
   9
  10 /*
  11  * High Level Configuration Options (easy to change)
  12  */
  13 #define CONFIG_DISPLAY_BOARDINFO_LATE
  14
  15 /*
  16  * TEXT_BASE needs to be below 16MiB, since this area is scrubbed
  17  * for DDR ECC byte filling in the SPL before loading the main
  18  * U-Boot into it.
  19  */
  20 #define CONFIG_SYS_TEXT_BASE    0x00800000
  21 #define CONFIG_SYS_TCLK         250000000       /* 250MHz */
  22
  23 /*
  24  * Commands configuration
  25  */
  26 #define CONFIG_CMD_ENV
  27 #define CONFIG_CMD_SATA
  28
  29 /*
  30  * The debugging version enables USB support via defconfig.
  31  * This version should also enable all other non-production
  32  * interfaces / features.
  33  */
  34 #ifdef CONFIG_USB
  35 #define CONFIG_CMD_PCI
  36 #endif
  37
  38 /* I2C */
  39 #define CONFIG_SYS_I2C
  40 #define CONFIG_SYS_I2C_MVTWSI
  41 #define CONFIG_I2C_MVTWSI_BASE0         MVEBU_TWSI_BASE
  42 #define CONFIG_I2C_MVTWSI_BASE1         MVEBU_TWSI1_BASE
  43 #define CONFIG_SYS_I2C_SLAVE            0x0
  44 #define CONFIG_SYS_I2C_SPEED            100000
  45
  46 /* USB/EHCI configuration */
  47 #define CONFIG_EHCI_IS_TDI
  48 #define CONFIG_USB_MAX_CONTROLLER_COUNT 3
  49
  50 #define CONFIG_SYS_NO_FLASH             /* Declare no flash (NOR/SPI) */
  51
  52 /* SPI NOR flash default params, used by sf commands */
  53 #define CONFIG_SF_DEFAULT_SPEED         27777777 /* for fast SPL booting */
  54 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_3
  55
  56 /* Environment in SPI NOR flash */
  57 #define CONFIG_ENV_IS_IN_SPI_FLASH
  58 #define CONFIG_ENV_OFFSET               (1 << 20) /* 1MiB in */
  59 #define CONFIG_ENV_SIZE                 (64 << 10) /* 64KiB */
  60 #define CONFIG_ENV_SECT_SIZE            (256 << 10) /* 256KiB sectors */
  61 #define CONFIG_ENV_OVERWRITE
  62
  63 #define CONFIG_PHY_MARVELL              /* there is a marvell phy */
  64 #define PHY_ANEG_TIMEOUT        8000    /* PHY needs a longer aneg time */
  65
  66 #define CONFIG_SYS_ALT_MEMTEST
  67 #define CONFIG_PREBOOT
  68
  69 /* Keep device tree and initrd in lower memory so the kernel can access them */
  70 #define CONFIG_EXTRA_ENV_SETTINGS       \
  71         "fdt_high=0x10000000\0"         \
  72         "initrd_high=0x10000000\0"
  73
  74 /* SATA support */
  75 #define CONFIG_SYS_SATA_MAX_DEVICE      1
  76 #define CONFIG_SATA_MV
  77 #define CONFIG_LIBATA
  78 #define CONFIG_LBA48
  79 #define CONFIG_EFI_PARTITION
  80 #define CONFIG_DOS_PARTITION
  81
  82 /* Additional FS support/configuration */
  83 #define CONFIG_SUPPORT_VFAT
  84
  85 /* PCIe support */
  86 #ifdef CONFIG_CMD_PCI
  87 #ifndef CONFIG_SPL_BUILD
  88 #define CONFIG_PCI_MVEBU
  89 #endif
  90 #endif
  91
  92 /* Enable LCD and reserve 512KB from top of memory*/
  93 #define CONFIG_SYS_MEM_TOP_HIDE         0x80000
  94
  95 #define CONFIG_CMD_BMP
  96
  97 /* FPGA programming support */
  98 #define CONFIG_FPGA
  99 #define CONFIG_FPGA_ALTERA
 100 #define CONFIG_FPGA_STRATIX_V
 101
 102 /*
 103  * Bootcounter
 104  */
 105 #define CONFIG_BOOTCOUNT_LIMIT
 106 #define CONFIG_BOOTCOUNT_RAM
 107 /* Max size of RAM minus BOOTCOUNT_ADDR is the bootcounter address */
 108 #define BOOTCOUNT_ADDR                  0x1000
 109
 110 /*
 111  * mv-common.h should be defined after CMD configs since it used them
 112  * to enable certain macros
 113  */
 114 #include "mv-common.h"
 115
 116 /*
 117  * Memory layout while starting into the bin_hdr via the
 118  * BootROM:
 119  *
 120  * 0x4000.4000 - 0x4003.4000    headers space (192KiB)
 121  * 0x4000.4030                  bin_hdr start address
 122  * 0x4003.4000 - 0x4004.7c00    BootROM memory allocations (15KiB)
 123  * 0x4007.fffc                  BootROM stack top
 124  *
 125  * The address space between 0x4007.fffc and 0x400f.fff is not locked in
 126  * L2 cache thus cannot be used.
 127  */
 128
 129 /* SPL */
 130 /* Defines for SPL */
 131 #define CONFIG_SPL_FRAMEWORK
 132 #define CONFIG_SPL_TEXT_BASE            0x40004030
 133 #define CONFIG_SPL_MAX_SIZE             ((128 << 10) - 0x4030)
 134
 135 #define CONFIG_SPL_BSS_START_ADDR       (0x40000000 + (128 << 10))
 136 #define CONFIG_SPL_BSS_MAX_SIZE         (16 << 10)
 137
 138 #ifdef CONFIG_SPL_BUILD
 139 #define CONFIG_SYS_MALLOC_SIMPLE
 140 #endif
 141
 142 #define CONFIG_SPL_STACK                (0x40000000 + ((192 - 16) << 10))
 143 #define CONFIG_SPL_BOOTROM_SAVE         (CONFIG_SPL_STACK + 4)
 144
 145 /* SPL related SPI defines */
 146 #define CONFIG_SPL_SPI_LOAD
 147 #define CONFIG_SYS_SPI_U_BOOT_OFFS      0x1a000
 148 #define CONFIG_SYS_U_BOOT_OFFS          CONFIG_SYS_SPI_U_BOOT_OFFS
 149
 150 /* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */
 151 #define CONFIG_DDR_FIXED_SIZE           (2 << 20)       /* 2GiB */
 152
 153 #endif /* _CONFIG_THEADORABLE_H */