include/configs/trats2.h

   1 /*
   2  * Copyright (C) 2013 Samsung Electronics
   3  * Sanghee Kim <sh0130.kim@samsung.com>
   4  * Piotr Wilczek <p.wilczek@samsung.com>
   5  *
   6  * Configuation settings for the SAMSUNG TRATS2 (EXYNOS4412) board.
   7  *
   8  * SPDX-License-Identifier:     GPL-2.0+
   9  */
  10
  11 #ifndef __CONFIG_TRATS2_H
  12 #define __CONFIG_TRATS2_H
  13
  14 #include <configs/exynos4-common.h>
  15
  16 #define CONFIG_TIZEN                    /* TIZEN lib */
  17
  18 #define CONFIG_SYS_L2CACHE_OFF
  19 #ifndef CONFIG_SYS_L2CACHE_OFF
  20 #define CONFIG_SYS_L2_PL310
  21 #define CONFIG_SYS_PL310_BASE   0x10502000
  22 #endif
  23
  24 /* TRATS2 has 4 banks of DRAM */
  25 #define CONFIG_NR_DRAM_BANKS            4
  26 #define CONFIG_SYS_SDRAM_BASE           0x40000000
  27 #define PHYS_SDRAM_1                    CONFIG_SYS_SDRAM_BASE
  28 #define SDRAM_BANK_SIZE                 (256 << 20)     /* 256 MB */
  29 /* memtest works on */
  30 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE
  31 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_SDRAM_BASE + 0x5E00000)
  32 #define CONFIG_SYS_LOAD_ADDR            (CONFIG_SYS_SDRAM_BASE + 0x3E00000)
  33
  34 /* select serial console configuration */
  35 #define CONFIG_SERIAL2
  36
  37 /* Console configuration */
  38
  39 #define CONFIG_BOOTCOMMAND              "run autoboot"
  40 #define CONFIG_DEFAULT_CONSOLE          "ttySAC2,115200n8"
  41
  42 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \
  43                                         - GENERATED_GBL_DATA_SIZE)
  44
  45 #define CONFIG_SYS_MEM_TOP_HIDE (1 << 20)       /* ram console */
  46
  47 #define CONFIG_SYS_MONITOR_BASE 0x00000000
  48
  49 #define CONFIG_SYS_MMC_ENV_DEV          CONFIG_MMC_DEFAULT_DEV
  50 #define CONFIG_ENV_SIZE                 4096
  51 #define CONFIG_ENV_OFFSET               ((32 - 4) << 10) /* 32KiB - 4KiB */
  52
  53 #define CONFIG_ENV_OVERWRITE
  54
  55 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
  56
  57 /* Tizen - partitions definitions */
  58 #define PARTS_CSA               "csa-mmc"
  59 #define PARTS_BOOT              "boot"
  60 #define PARTS_QBOOT             "qboot"
  61 #define PARTS_CSC               "csc"
  62 #define PARTS_ROOT              "platform"
  63 #define PARTS_DATA              "data"
  64 #define PARTS_UMS               "ums"
  65
  66 #define PARTS_DEFAULT \
  67         "uuid_disk=${uuid_gpt_disk};" \
  68         "name="PARTS_CSA",start=5MiB,size=8MiB,uuid=${uuid_gpt_"PARTS_CSA"};" \
  69         "name="PARTS_BOOT",size=60MiB,uuid=${uuid_gpt_"PARTS_BOOT"};" \
  70         "name="PARTS_QBOOT",size=100MiB,uuid=${uuid_gpt_"PARTS_QBOOT"};" \
  71         "name="PARTS_CSC",size=150MiB,uuid=${uuid_gpt_"PARTS_CSC"};" \
  72         "name="PARTS_ROOT",size=1536MiB,uuid=${uuid_gpt_"PARTS_ROOT"};" \
  73         "name="PARTS_DATA",size=3000MiB,uuid=${uuid_gpt_"PARTS_DATA"};" \
  74         "name="PARTS_UMS",size=-,uuid=${uuid_gpt_"PARTS_UMS"}\0" \
  75
  76 #define CONFIG_DFU_ALT \
  77         "u-boot raw 0x80 0x800;" \
  78         "/uImage ext4 0 2;" \
  79         "/modem.bin ext4 0 2;" \
  80         "/exynos4412-trats2.dtb ext4 0 2;" \
  81         ""PARTS_CSA" part 0 1;" \
  82         ""PARTS_BOOT" part 0 2;" \
  83         ""PARTS_QBOOT" part 0 3;" \
  84         ""PARTS_CSC" part 0 4;" \
  85         ""PARTS_ROOT" part 0 5;" \
  86         ""PARTS_DATA" part 0 6;" \
  87         ""PARTS_UMS" part 0 7;" \
  88         "params.bin raw 0x38 0x8;" \
  89         "/Image.itb ext4 0 2\0"
  90
  91 #define CONFIG_EXTRA_ENV_SETTINGS \
  92         "bootk=" \
  93                 "run loaduimage;" \
  94                 "if run loaddtb; then " \
  95                         "bootm 0x40007FC0 - ${fdtaddr};" \
  96                 "fi;" \
  97                 "bootm 0x40007FC0;\0" \
  98         "updatebackup=" \
  99                 "mmc dev 0 2; mmc write 0x51000000 0 0x800;" \
 100                 " mmc dev 0 0\0" \
 101         "updatebootb=" \
 102                 "mmc read 0x51000000 0x80 0x800; run updatebackup\0" \
 103         "mmcboot=" \
 104                 "setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
 105                 "${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo}; " \
 106                 "run bootk\0" \
 107         "bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \
 108         "boottrace=setenv opts initcall_debug; run bootcmd\0" \
 109         "verify=n\0" \
 110         "rootfstype=ext4\0" \
 111         "console=" CONFIG_DEFAULT_CONSOLE "\0" \
 112         "kernelname=uImage\0" \
 113         "loaduimage=ext4load mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 " \
 114                 "${kernelname}\0" \
 115         "loaddtb=ext4load mmc ${mmcdev}:${mmcbootpart} ${fdtaddr} " \
 116                 "${fdtfile}\0" \
 117         "mmcdev=" __stringify(CONFIG_MMC_DEFAULT_DEV) "\0" \
 118         "mmcbootpart=2\0" \
 119         "mmcrootpart=5\0" \
 120         "opts=always_resume=1\0" \
 121         "partitions=" PARTS_DEFAULT \
 122         "dfu_alt_info=" CONFIG_DFU_ALT \
 123         "uartpath=ap\0" \
 124         "usbpath=ap\0" \
 125         "consoleon=set console console=ttySAC2,115200n8; save; reset\0" \
 126         "consoleoff=set console console=ram; save; reset\0" \
 127         "spladdr=0x40000100\0" \
 128         "splsize=0x200\0" \
 129         "splfile=falcon.bin\0" \
 130         "spl_export=" \
 131                    "setexpr spl_imgsize ${splsize} + 8 ;" \
 132                    "setenv spl_imgsize 0x${spl_imgsize};" \
 133                    "setexpr spl_imgaddr ${spladdr} - 8 ;" \
 134                    "setexpr spl_addr_tmp ${spladdr} - 4 ;" \
 135                    "mw.b ${spl_imgaddr} 0x00 ${spl_imgsize};run loaduimage;" \
 136                    "setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
 137                    "${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo};" \
 138                    "spl export atags 0x40007FC0;" \
 139                    "crc32 ${spladdr} ${splsize} ${spl_imgaddr};" \
 140                    "mw.l ${spl_addr_tmp} ${splsize};" \
 141                    "ext4write mmc ${mmcdev}:${mmcbootpart}" \
 142                    " /${splfile} ${spl_imgaddr} ${spl_imgsize};" \
 143                    "setenv spl_imgsize;" \
 144                    "setenv spl_imgaddr;" \
 145                    "setenv spl_addr_tmp;\0" \
 146         CONFIG_EXTRA_ENV_ITB \
 147         "fdtaddr=40800000\0" \
 148
 149 /* GPT */
 150
 151 /* Security subsystem - enable hw_rand() */
 152 #define CONFIG_EXYNOS_ACE_SHA
 153
 154 /* Common misc for Samsung */
 155 #define CONFIG_MISC_COMMON
 156
 157 #define CONFIG_MISC_INIT_R
 158
 159 /* Download menu - Samsung common */
 160 #define CONFIG_LCD_MENU
 161
 162 /* Download menu - definitions for check keys */
 163 #ifndef __ASSEMBLY__
 164
 165 #define KEY_PWR_PMIC_NAME               "MAX77686_PMIC"
 166 #define KEY_PWR_STATUS_REG              MAX77686_REG_PMIC_STATUS1
 167 #define KEY_PWR_STATUS_MASK             (1 << 0)
 168 #define KEY_PWR_INTERRUPT_REG           MAX77686_REG_PMIC_INT1
 169 #define KEY_PWR_INTERRUPT_MASK          (1 << 1)
 170
 171 #define KEY_VOL_UP_GPIO                 EXYNOS4X12_GPIO_X22
 172 #define KEY_VOL_DOWN_GPIO               EXYNOS4X12_GPIO_X33
 173 #endif /* __ASSEMBLY__ */
 174
 175 /* LCD console */
 176 #define LCD_BPP                 LCD_COLOR16
 177
 178 /* LCD */
 179 #define CONFIG_BMP_16BPP
 180 #define CONFIG_FB_ADDR          0x52504000
 181 #define CONFIG_EXYNOS_MIPI_DSIM
 182 #define CONFIG_VIDEO_BMP_GZIP
 183 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((500 * 160 * 4) + 54)
 184
 185 #endif  /* __CONFIG_H */