include/netdev.h

   1 /*
   2  * (C) Copyright 2008
   3  * Benjamin Warren, biggerbadderben@gmail.com
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 /*
   9  * netdev.h - definitions an prototypes for network devices
  10  */
  11
  12 #ifndef _NETDEV_H_
  13 #define _NETDEV_H_
  14
  15 /*
  16  * Board and CPU-specific initialization functions
  17  * board_eth_init() has highest priority.  cpu_eth_init() only
  18  * gets called if board_eth_init() isn't instantiated or fails.
  19  * Return values:
  20  *      0: success
  21  *     -1: failure
  22  */
  23
  24 int board_eth_init(bd_t *bis);
  25 int cpu_eth_init(bd_t *bis);
  26
  27 /* Driver initialization prototypes */
  28 int at91emac_register(bd_t *bis, unsigned long iobase);
  29 int au1x00_enet_initialize(bd_t*);
  30 int ax88180_initialize(bd_t *bis);
  31 int bcm_sf2_eth_register(bd_t *bis, u8 dev_num);
  32 int bfin_EMAC_initialize(bd_t *bis);
  33 int calxedaxgmac_initialize(u32 id, ulong base_addr);
  34 int cs8900_initialize(u8 dev_num, int base_addr);
  35 int davinci_emac_initialize(void);
  36 int dc21x4x_initialize(bd_t *bis);
  37 int designware_initialize(ulong base_addr, u32 interface);
  38 int dm9000_initialize(bd_t *bis);
  39 int dnet_eth_initialize(int id, void *regs, unsigned int phy_addr);
  40 int e1000_initialize(bd_t *bis);
  41 int eepro100_initialize(bd_t *bis);
  42 int enc28j60_initialize(unsigned int bus, unsigned int cs,
  43         unsigned int max_hz, unsigned int mode);
  44 int ep93xx_eth_initialize(u8 dev_num, int base_addr);
  45 int eth_3com_initialize (bd_t * bis);
  46 int ethoc_initialize(u8 dev_num, int base_addr);
  47 int fec_initialize (bd_t *bis);
  48 int fecmxc_initialize(bd_t *bis);
  49 int fecmxc_initialize_multi(bd_t *bis, int dev_id, int phy_id, uint32_t addr);
  50 int ftgmac100_initialize(bd_t *bits);
  51 int ftmac100_initialize(bd_t *bits);
  52 int ftmac110_initialize(bd_t *bits);
  53 void gt6426x_eth_initialize(bd_t *bis);
  54 int ks8851_mll_initialize(u8 dev_num, int base_addr);
  55 int lan91c96_initialize(u8 dev_num, int base_addr);
  56 int lpc32xx_eth_initialize(bd_t *bis);
  57 int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
  58 int mcdmafec_initialize(bd_t *bis);
  59 int mcffec_initialize(bd_t *bis);
  60 int mvgbe_initialize(bd_t *bis);
  61 int mvneta_initialize(bd_t *bis, int base_addr, int devnum, int phy_addr);
  62 int natsemi_initialize(bd_t *bis);
  63 int ne2k_register(void);
  64 int npe_initialize(bd_t *bis);
  65 int ns8382x_initialize(bd_t *bis);
  66 int pcnet_initialize(bd_t *bis);
  67 int ppc_4xx_eth_initialize (bd_t *bis);
  68 int rtl8139_initialize(bd_t *bis);
  69 int rtl8169_initialize(bd_t *bis);
  70 int scc_initialize(bd_t *bis);
  71 int sh_eth_initialize(bd_t *bis);
  72 int skge_initialize(bd_t *bis);
  73 int smc91111_initialize(u8 dev_num, int base_addr);
  74 int smc911x_initialize(u8 dev_num, int base_addr);
  75 int tsi108_eth_initialize(bd_t *bis);
  76 int uec_standard_init(bd_t *bis);
  77 int uli526x_initialize(bd_t *bis);
  78 int armada100_fec_register(unsigned long base_addr);
  79
  80 /* Boards with PCI network controllers can call this from their board_eth_init()
  81  * function to initialize whatever's on board.
  82  * Return value is total # of devices found */
  83
  84 static inline int pci_eth_init(bd_t *bis)
  85 {
  86         int num = 0;
  87
  88 #ifdef CONFIG_PCI
  89
  90 #ifdef CONFIG_EEPRO100
  91         num += eepro100_initialize(bis);
  92 #endif
  93 #ifdef CONFIG_TULIP
  94         num += dc21x4x_initialize(bis);
  95 #endif
  96 #ifdef CONFIG_E1000
  97         num += e1000_initialize(bis);
  98 #endif
  99 #ifdef CONFIG_PCNET
 100         num += pcnet_initialize(bis);
 101 #endif
 102 #ifdef CONFIG_NATSEMI
 103         num += natsemi_initialize(bis);
 104 #endif
 105 #ifdef CONFIG_NS8382X
 106         num += ns8382x_initialize(bis);
 107 #endif
 108 #if defined(CONFIG_RTL8139)
 109         num += rtl8139_initialize(bis);
 110 #endif
 111 #if defined(CONFIG_RTL8169)
 112         num += rtl8169_initialize(bis);
 113 #endif
 114 #if defined(CONFIG_ULI526X)
 115         num += uli526x_initialize(bis);
 116 #endif
 117
 118 #endif  /* CONFIG_PCI */
 119         return num;
 120 }
 121
 122 #ifdef CONFIG_DM_ETH
 123 struct mii_dev *fec_get_miibus(struct udevice *dev, int dev_id);
 124 #else
 125 struct mii_dev *fec_get_miibus(uint32_t base_addr, int dev_id);
 126 #endif
 127
 128 #ifdef CONFIG_PHYLIB
 129 struct phy_device;
 130 int fec_probe(bd_t *bd, int dev_id, uint32_t base_addr,
 131                 struct mii_dev *bus, struct phy_device *phydev);
 132 #else
 133 /*
 134  * Allow FEC to fine-tune MII configuration on boards which require this.
 135  */
 136 int fecmxc_register_mii_postcall(struct eth_device *dev, int (*cb)(int));
 137 #endif
 138
 139 #endif /* _NETDEV_H_ */