include/netdev.h

   1 /*
   2  * (C) Copyright 2008
   3  * Benjamin Warren, biggerbadderben@gmail.com
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 /*
   9  * netdev.h - definitions an prototypes for network devices
  10  */
  11
  12 #ifndef _NETDEV_H_
  13 #define _NETDEV_H_
  14
  15 /*
  16  * Board and CPU-specific initialization functions
  17  * board_eth_init() has highest priority.  cpu_eth_init() only
  18  * gets called if board_eth_init() isn't instantiated or fails.
  19  * Return values:
  20  *      0: success
  21  *     -1: failure
  22  */
  23
  24 int board_eth_init(bd_t *bis);
  25 int cpu_eth_init(bd_t *bis);
  26
  27 /* Driver initialization prototypes */
  28 int at91emac_register(bd_t *bis, unsigned long iobase);
  29 int au1x00_enet_initialize(bd_t*);
  30 int ax88180_initialize(bd_t *bis);
  31 int bcm_sf2_eth_register(bd_t *bis, u8 dev_num);
  32 int bfin_EMAC_initialize(bd_t *bis);
  33 int calxedaxgmac_initialize(u32 id, ulong base_addr);
  34 int cs8900_initialize(u8 dev_num, int base_addr);
  35 int davinci_emac_initialize(void);
  36 int dc21x4x_initialize(bd_t *bis);
  37 int designware_initialize(ulong base_addr, u32 interface);
  38 int dm9000_initialize(bd_t *bis);
  39 int dnet_eth_initialize(int id, void *regs, unsigned int phy_addr);
  40 int e1000_initialize(bd_t *bis);
  41 int eepro100_initialize(bd_t *bis);
  42 int enc28j60_initialize(unsigned int bus, unsigned int cs,
  43         unsigned int max_hz, unsigned int mode);
  44 int ep93xx_eth_initialize(u8 dev_num, int base_addr);
  45 int eth_3com_initialize (bd_t * bis);
  46 int ethoc_initialize(u8 dev_num, int base_addr);
  47 int fec_initialize (bd_t *bis);
  48 int fecmxc_initialize(bd_t *bis);
  49 int fecmxc_initialize_multi(bd_t *bis, int dev_id, int phy_id, uint32_t addr);
  50 int ftgmac100_initialize(bd_t *bits);
  51 int ftmac100_initialize(bd_t *bits);
  52 int ftmac110_initialize(bd_t *bits);
  53 void gt6426x_eth_initialize(bd_t *bis);
  54 int ks8851_mll_initialize(u8 dev_num, int base_addr);
  55 int lan91c96_initialize(u8 dev_num, int base_addr);
  56 int lpc32xx_eth_initialize(bd_t *bis);
  57 int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
  58 int mcdmafec_initialize(bd_t *bis);
  59 int mcffec_initialize(bd_t *bis);
  60 int mvgbe_initialize(bd_t *bis);
  61 int mvneta_initialize(bd_t *bis, int base_addr, int devnum, int phy_addr);
  62 int natsemi_initialize(bd_t *bis);
  63 int ne2k_register(void);
  64 int npe_initialize(bd_t *bis);
  65 int ns8382x_initialize(bd_t *bis);
  66 int pcnet_initialize(bd_t *bis);
  67 int ppc_4xx_eth_initialize (bd_t *bis);
  68 int rtl8139_initialize(bd_t *bis);
  69 int rtl8169_initialize(bd_t *bis);
  70 int scc_initialize(bd_t *bis);
  71 int sh_eth_initialize(bd_t *bis);
  72 int skge_initialize(bd_t *bis);
  73 int smc91111_initialize(u8 dev_num, int base_addr);
  74 int smc911x_initialize(u8 dev_num, int base_addr);
  75 int tsi108_eth_initialize(bd_t *bis);
  76 int uec_standard_init(bd_t *bis);
  77 int uli526x_initialize(bd_t *bis);
  78 int armada100_fec_register(unsigned long base_addr);
  79 int xilinx_ll_temac_eth_init(bd_t *bis, unsigned long base_addr, int flags,
  80                                                 unsigned long ctrl_addr);
  81 /*
  82  * As long as the Xilinx xps_ll_temac ethernet driver has not its own interface
  83  * exported by a public hader file, we need a global definition at this point.
  84  */
  85 #if defined(CONFIG_XILINX_LL_TEMAC)
  86 #define XILINX_LL_TEMAC_M_FIFO          0       /* use FIFO Ctrl */
  87 #define XILINX_LL_TEMAC_M_SDMA_PLB      (1 << 0)/* use SDMA Ctrl via PLB */
  88 #define XILINX_LL_TEMAC_M_SDMA_DCR      (1 << 1)/* use SDMA Ctrl via DCR */
  89 #endif
  90
  91 /* Boards with PCI network controllers can call this from their board_eth_init()
  92  * function to initialize whatever's on board.
  93  * Return value is total # of devices found */
  94
  95 static inline int pci_eth_init(bd_t *bis)
  96 {
  97         int num = 0;
  98
  99 #ifdef CONFIG_PCI
 100
 101 #ifdef CONFIG_EEPRO100
 102         num += eepro100_initialize(bis);
 103 #endif
 104 #ifdef CONFIG_TULIP
 105         num += dc21x4x_initialize(bis);
 106 #endif
 107 #ifdef CONFIG_E1000
 108         num += e1000_initialize(bis);
 109 #endif
 110 #ifdef CONFIG_PCNET
 111         num += pcnet_initialize(bis);
 112 #endif
 113 #ifdef CONFIG_NATSEMI
 114         num += natsemi_initialize(bis);
 115 #endif
 116 #ifdef CONFIG_NS8382X
 117         num += ns8382x_initialize(bis);
 118 #endif
 119 #if defined(CONFIG_RTL8139)
 120         num += rtl8139_initialize(bis);
 121 #endif
 122 #if defined(CONFIG_RTL8169)
 123         num += rtl8169_initialize(bis);
 124 #endif
 125 #if defined(CONFIG_ULI526X)
 126         num += uli526x_initialize(bis);
 127 #endif
 128
 129 #endif  /* CONFIG_PCI */
 130         return num;
 131 }
 132
 133 #ifdef CONFIG_DM_ETH
 134 struct mii_dev *fec_get_miibus(struct udevice *dev, int dev_id);
 135 #else
 136 struct mii_dev *fec_get_miibus(uint32_t base_addr, int dev_id);
 137 #endif
 138
 139 #ifdef CONFIG_PHYLIB
 140 struct phy_device;
 141 int fec_probe(bd_t *bd, int dev_id, uint32_t base_addr,
 142                 struct mii_dev *bus, struct phy_device *phydev);
 143 #else
 144 /*
 145  * Allow FEC to fine-tune MII configuration on boards which require this.
 146  */
 147 int fecmxc_register_mii_postcall(struct eth_device *dev, int (*cb)(int));
 148 #endif
 149
 150 #endif /* _NETDEV_H_ */