source "drivers/net/phy/Kconfig" config DM_ETH bool "Enable Driver Model for Ethernet drivers" depends on DM help Enable driver model for Ethernet. The eth_*() interface will be implemented by the UC_ETH class This is currently implemented in net/eth.c Look in include/net.h for details. menuconfig NETDEVICES bool "Network device support" depends on NET default y if DM_ETH help You must select Y to enable any network device support Generally if you have any networking support this is a given If unsure, say Y if NETDEVICES config AG7XXX bool "Atheros AG7xxx Ethernet MAC support" depends on DM_ETH && ARCH_ATH79 select PHYLIB help This driver supports the Atheros AG7xxx Ethernet MAC. This MAC is present in the Atheros AR7xxx, AR9xxx and QCA9xxx MIPS chips. config ALTERA_TSE bool "Altera Triple-Speed Ethernet MAC support" depends on DM_ETH select PHYLIB help This driver supports the Altera Triple-Speed (TSE) Ethernet MAC. Please find details on the "Triple-Speed Ethernet MegaCore Function Resource Center" of Altera. config DWC_ETH_QOS bool "Synopsys DWC Ethernet QOS device support" depends on DM_ETH select PHYLIB help This driver supports the Synopsys Designware Ethernet QOS (Quality Of Service) IP block. The IP supports many options for bus type, clocking/reset structure, and feature list. This driver currently supports the specific configuration used in NVIDIA's Tegra186 chip, but should be extensible to other combinations quite easily. config E1000 bool "Intel PRO/1000 Gigabit Ethernet support" help This driver supports Intel(R) PRO/1000 gigabit ethernet family of adapters. For more information on how to identify your adapter, go to the Adapter & Driver ID Guide at: config E1000_SPI_GENERIC bool "Allow access to the Intel 8257x SPI bus" depends on E1000 help Allow generic access to the SPI bus on the Intel 8257x, for example with the "sspi" command. config E1000_SPI bool "Enable SPI bus utility code" depends on E1000 help Utility code for direct access to the SPI bus on Intel 8257x. This does not do anything useful unless you set at least one of CONFIG_CMD_E1000 or CONFIG_E1000_SPI_GENERIC. config CMD_E1000 bool "Enable the e1000 command" depends on E1000 help This enables the 'e1000' management command for E1000 devices. When used on devices with SPI support you can reprogram the EEPROM from U-Boot. config ETH_SANDBOX depends on DM_ETH && SANDBOX default y bool "Sandbox: Mocked Ethernet driver" help This driver simply responds with fake ARP replies and ping replies that are used to verify network stack functionality This driver is particularly useful in the test/dm/eth.c tests config ETH_SANDBOX_RAW depends on DM_ETH && SANDBOX default y bool "Sandbox: Bridge to Linux Raw Sockets" help This driver is a bridge from the bottom of the network stack in U-Boot to the RAW AF_PACKET API in Linux. This allows real network traffic to be tested from within sandbox. See board/sandbox/README.sandbox for more details. config ETH_DESIGNWARE bool "Synopsys Designware Ethernet MAC" select PHYLIB help This MAC is present in SoCs from various vendors. It supports 100Mbit and 1 Gbit operation. You must enable CONFIG_PHYLIB to provide the PHY (physical media interface). config ETHOC bool "OpenCores 10/100 Mbps Ethernet MAC" help This MAC is present in OpenRISC and Xtensa XTFPGA boards. config FEC_MXC bool "FEC Ethernet controller" depends on MX5 || MX6 help This driver supports the 10/100 Fast Ethernet controller for NXP i.MX processors. config MVPP2 bool "Marvell Armada 375/7K/8K network interface support" depends on ARMADA_375 || ARMADA_8K select PHYLIB help This driver supports the network interface units in the Marvell ARMADA 375, 7K and 8K SoCs. config MACB bool "Cadence MACB/GEM Ethernet Interface" depends on DM_ETH select PHYLIB help The Cadence MACB ethernet interface is found on many Atmel AT91 and SAMA5 parts. This driver also supports the Cadence GEM (Gigabit Ethernet MAC) found in some ARM SoC devices. Say Y to include support for the MACB/GEM chip. config PCH_GBE bool "Intel Platform Controller Hub EG20T GMAC driver" depends on DM_ETH && DM_PCI select PHYLIB help This MAC is present in Intel Platform Controller Hub EG20T. It supports 10/100/1000 Mbps operation. config RTL8139 bool "Realtek 8139 series Ethernet controller driver" help This driver supports Realtek 8139 series fast ethernet family of PCI chipsets/adapters. config RTL8169 bool "Realtek 8169 series Ethernet controller driver" help This driver supports Realtek 8169 series gigabit ethernet family of PCI/PCIe chipsets/adapters. config SUN8I_EMAC bool "Allwinner Sun8i Ethernet MAC support" depends on DM_ETH select PHYLIB help This driver supports the Allwinner based SUN8I/SUN50I Ethernet MAC. It can be found in H3/A64/A83T based SoCs and compatible with both External and Internal PHYs. config XILINX_AXIEMAC depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP) select PHYLIB select MII bool "Xilinx AXI Ethernet" help This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs. config XILINX_EMACLITE depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP || MIPS) select PHYLIB select MII bool "Xilinx Ethernetlite" help This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs. config ZYNQ_GEM depends on DM_ETH && (ARCH_ZYNQ || ARCH_ZYNQMP) select PHYLIB bool "Xilinx Ethernet GEM" help This MAC is present in Xilinx Zynq and ZynqMP SoCs. config PIC32_ETH bool "Microchip PIC32 Ethernet Support" depends on DM_ETH && MACH_PIC32 select PHYLIB help This driver implements 10/100 Mbps Ethernet and MAC layer for Microchip PIC32 microcontrollers. config GMAC_ROCKCHIP bool "Rockchip Synopsys Designware Ethernet MAC" depends on DM_ETH && ETH_DESIGNWARE help This driver provides Rockchip SoCs network support based on the Synopsys Designware driver. endif # NETDEVICES