Patch by Travis Sawyer, 30 Dec 2003:

[people/ms/u-boot.git] / CHANGELOG

diff --git a/CHANGELOG b/CHANGELOG
index ef42071a3d0d6bcb487c24e9b3889bf1750818d0..fa3bbfe048045024f5af8809037239dbcce7ff02 100644 (file)
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -1,7 +1,80 @@
 ======================================================================
-Changes since U-Boot 1.0.0:
+Changes since U-Boot 1.0.1:
 ======================================================================
 
+* Patch by Travis Sawyer, 30 Dec 2003:
+  Add support for IBM PPC440GX. Multiple EMAC Ethernet devices,
+  select MDI port based on enabled EMAC device.
+  Add support for XES Inc <http://www.xes-inc.com> XPedite1000 440GX
+  base PrPMC board.
+
+* Patch by Wolter Kamphuis, 15 Dec 2003:
+  made CONFIG_SILENT_CONSOLE usable on all architectures
+
+* Disable date command on TQM866M - there is no RTC on MPC866
+
+* Fix variable CPU clock for MPC859/866 systems for low CPU clocks
+
+* Implement adaptive SDRAM timing configuration based on actual CPU
+  clock frequency for INCA-IP; fix problem with board hanging when
+  switching from 150MHz to 100MHz
+
+* Add PCMCIA CS support for BMS2003 board
+
+* Add variable CPU clock for MPC859/866 systems (so far only TQM866M):
+  see doc/README.MPC866 for details;
+  implement workaround for "SIU4" and "SIU9" silicon bugs on MPC866;
+  calculate CPU clock frequency from PLL register values.
+
+* Add support for 128 MB RAM on TQM8xxL/M modules
+
+* Fix PS/2 keyboard problem caused by statically initialized variable
+  pointing to a location in flash
+
+* Fix INCA-IP clock calculation: 400/3 = 133.3 MHz, not 130.
+
+* The PS/2 mux on the BMS2003 board needs 450 ms after power on
+  before we can access it; add delay in case we are faster (with no
+  CF card inserted)
+
+* Cleanup of some init functions
+
+* Make sure SCC Ethernet is always stopped by the time we boot Linux
+  to avoid Linux crashes by early packets coming in.
+
+* Accelerate flash accesses on LWMON board by using buffered writes
+
+* Fix typo in Makefile;
+  fix problem with PARTNUM detection
+
+* Patch by Reinhard Meyer, 09 Jan 2004:
+  - add RTC support for MPC5200 based boards (requires RTC_XTAL)
+
+* Add support for IDE LED on BMS2003 board
+  (exclusive with status LED!)
+
+* Add support for PS/2 keyboard (used with PS/2 multiplexor on
+  BMS2003 board)
+
+* Patches by Reinhard Meyer, 4 Jan 2004 + 7 Jan 2004:
+  Add common files for "emk" boards
+
+* Add a common get_ram_size() function and modify the the
+  board-specific files to invoke that common implementation.
+
+======================================================================
+Changes for U-Boot 1.0.1:
+======================================================================
+
+* Set default clock for INCA-IP to 150 MHz
+
+* Make BMS2003 use a separate config file to avoid #ifdef mess;
+  add I2C support; add support for DS1337 RTC
+
+* Add CompactFlash support  for BMS2003 board
+
+* Add support for status LED on BMS2003 board
+
 * Patch by Scott McNutt, 02 Jan 2004:
   Add support for the Nios Active Serial Memory Interface (ASMI)
   on Cyclone devices