net/ethoc: add CONFIG_DM_ETH support

[people/ms/u-boot.git] / Kconfig

diff --git a/Kconfig b/Kconfig
index 817f4f08a02f0806a0d1d63c04e0e1e6829abf07..cb5af5b0f76b3d594cb5c88b470fbe03755925c9 100644 (file)
--- a/Kconfig
+++ b/Kconfig
@@ -53,6 +53,23 @@ config CC_OPTIMIZE_FOR_SIZE
 
          This option is enabled by default for U-Boot.
 
+config DISTRO_DEFAULTS
+       bool "Select defaults suitable for booting general purpose Linux distributions"
+       default y if ARCH_SUNXI
+       default n
+       select CMD_BOOTZ
+       select CMD_DHCP
+       select CMD_EXT2
+       select CMD_EXT4
+       select CMD_FAT
+       select CMD_FS_GENERIC
+       select CMD_MII
+       select CMD_PING
+       select HUSH_PARSER
+       help
+         Select this to enable various options and commands which are suitable
+         for building u-boot for booting general purpose Linux distributions.
+
 config SYS_MALLOC_F
        bool "Enable malloc() pool before relocation"
        default y if DM
@@ -97,7 +114,24 @@ if EXPERT
          Warning:
          When disabling this, please check if malloc calls, maybe
          should be replaced by calloc - if one expects zeroed memory.
+
+config TOOLS_DEBUG
+       bool "Enable debug information for tools"
+       help
+         Enable generation of debug information for tools such as mkimage.
+         This can be used for debugging purposes. With debug information
+         it is possible to set breakpoints on particular lines, single-step
+         debug through the source code, etc.
+
 endif
+
+config PHYS_64BIT
+       bool "64bit physical address support"
+       help
+         Say Y here to support 64bit physical memory address.
+         This can be used not only for 64bit SoCs, but also for
+         large physical address extention on 32bit SoCs.
+
 endmenu                # General setup
 
 menu "Boot images"
@@ -296,12 +330,49 @@ config SPL_LOAD_FIT
          particular it can handle selecting from multiple device tree
          and passing the correct one to U-Boot.
 
+config SPL_FIT_IMAGE_POST_PROCESS
+       bool "Enable post-processing of FIT artifacts after loading by the SPL"
+       depends on SPL_LOAD_FIT && TI_SECURE_DEVICE
+       help
+         Allows doing any sort of manipulation to blobs after they got extracted
+         from the U-Boot FIT image like stripping off headers or modifying the
+         size of the blob, verification, authentication, decryption etc. in a
+         platform or board specific way. In order to use this feature a platform
+         or board-specific implementation of board_fit_image_post_process() must
+         be provided. Also, anything done during this post-processing step would
+         need to be comprehended in how the images were prepared before being
+         injected into the FIT creation (i.e. the blobs would have been pre-
+         processed before being added to the FIT image).
+
+config FIT_IMAGE_POST_PROCESS
+       bool "Enable post-processing of FIT artifacts after loading by U-Boot"
+       depends on FIT && TI_SECURE_DEVICE
+       help
+         Allows doing any sort of manipulation to blobs after they got extracted
+         from FIT images like stripping off headers or modifying the size of the
+         blob, verification, authentication, decryption etc. in a platform or
+         board specific way. In order to use this feature a platform or board-
+         specific implementation of board_fit_image_post_process() must be
+         provided. Also, anything done during this post-processing step would
+         need to be comprehended in how the images were prepared before being
+         injected into the FIT creation (i.e. the blobs would have been pre-
+         processed before being added to the FIT image).
+
 config SYS_CLK_FREQ
        depends on ARC || ARCH_SUNXI
        int "CPU clock frequency"
        help
          TODO: Move CONFIG_SYS_CLK_FREQ for all the architecture
 
+config ARCH_FIXUP_FDT
+       bool "Enable arch_fixup_fdt() call"
+       depends on ARM || MIPS
+       default y
+       help
+         Enable FDT memory map syncup before OS boot. This feature can be
+         used for booting OS with different memory setup where the part of
+         the memory location should be used for different purpose.
+
 endmenu                # Boot images
 
 source "common/Kconfig"