-VERSION = 2015
-PATCHLEVEL = 10
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+VERSION = 2016
+PATCHLEVEL = 01
SUBLEVEL =
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc2
NAME =
# *DOCUMENTATION*
UBOOTINCLUDE := \
-Iinclude \
$(if $(KBUILD_SRC), -I$(srctree)/include) \
+ $(if $(CONFIG_SYS_THUMB_BUILD), $(if $(CONFIG_HAS_THUMB2),, \
+ -I$(srctree)/arch/$(ARCH)/thumb1/include),) \
-I$(srctree)/arch/$(ARCH)/include \
-include $(srctree)/include/linux/kconfig.h
libs-y += drivers/spi/
libs-$(CONFIG_FMAN_ENET) += drivers/net/fm/
libs-$(CONFIG_SYS_FSL_DDR) += drivers/ddr/fsl/
+libs-$(CONFIG_ALTERA_SDRAM) += drivers/ddr/altera/
libs-y += drivers/serial/
libs-y += drivers/usb/dwc3/
libs-y += drivers/usb/emul/
endif
ALL-$(CONFIG_REMAKE_ELF) += u-boot.elf
ALL-$(CONFIG_EFI_APP) += u-boot-app.efi
+ALL-$(CONFIG_EFI_STUB) += u-boot-payload.efi
ifneq ($(BUILD_ROM),)
ALL-$(CONFIG_X86_RESET_VECTOR) += u-boot.rom
quiet_cmd_zobjcopy = OBJCOPY $@
cmd_zobjcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
+quiet_cmd_efipayload = OBJCOPY $@
+cmd_efipayload = $(OBJCOPY) -I binary -O $(EFIPAYLOAD_BFDTARGET) -B $(EFIPAYLOAD_BFDARCH) $< $@
+
quiet_cmd_mkimage = MKIMAGE $@
cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
$(if $(KBUILD_VERBOSE:1=), >/dev/null)
-T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE)
MKIMAGEFLAGS_u-boot-spl.kwb = -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) \
- -T kwbimage -a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE)
+ -T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE)
MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
-R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage
u-boot.img u-boot.kwb u-boot.pbl: u-boot.bin FORCE
$(call if_changed,mkimage)
-u-boot-spl.kwb: u-boot.img spl/u-boot-spl.bin FORCE
+# If the kwboot xmodem protocol is used, to boot U-Boot on the MVEBU
+# SoC's, the SPL U-Boot returns to the BootROM after it completes
+# the SDRAM setup. The BootROM expects no U-Boot header in the main
+# U-Boot image. So we need to combine SPL and u-boot.bin instead of
+# u-boot.img in this case.
+ifdef CONFIG_MVEBU_BOOTROM_UARTBOOT
+u-boot-spl.kwb: u-boot-dtb.bin spl/u-boot-spl.bin FORCE
+ $(call if_changed,mkimage)
+else
+u-boot-spl.kwb: u-boot-dtb.img spl/u-boot-spl.bin FORCE
$(call if_changed,mkimage)
+endif
MKIMAGEFLAGS_u-boot-dtb.img = $(MKIMAGEFLAGS_u-boot.img)
u-boot.spr: spl/u-boot-spl.img u-boot.img FORCE
$(call if_changed,pad_cat)
-MKIMAGEFLAGS_u-boot-spl.gph = -A $(ARCH) -T gpimage -C none \
- -a $(CONFIG_SPL_TEXT_BASE) -e $(CONFIG_SPL_TEXT_BASE) -n SPL
-spl/u-boot-spl.gph: spl/u-boot-spl.bin FORCE
- $(call if_changed,mkimage)
-
-OBJCOPYFLAGS_u-boot-spi.gph = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \
- --gap-fill=0
-u-boot-spi.gph: spl/u-boot-spl.gph u-boot.img FORCE
- $(call if_changed,pad_cat)
-
-MKIMAGEFLAGS_u-boot-nand.gph = -A $(ARCH) -T gpimage -C none \
- -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) -n U-Boot
-u-boot-nand.gph: u-boot.bin FORCE
- $(call if_changed,mkimage)
- @dd if=/dev/zero bs=8 count=1 2>/dev/null >> $@
+ifneq ($(CONFIG_ARCH_SOCFPGA),)
+quiet_cmd_socboot = SOCBOOT $@
+cmd_socboot = cat spl/u-boot-spl-dtb.sfp spl/u-boot-spl-dtb.sfp \
+ spl/u-boot-spl-dtb.sfp spl/u-boot-spl-dtb.sfp \
+ u-boot-dtb.img > $@ || rm -f $@
+u-boot-with-spl-dtb.sfp: spl/u-boot-spl-dtb.sfp u-boot-dtb.img FORCE
+ $(call if_changed,socboot)
+endif
# x86 uses a large ROM. We fill it with 0xff, put the 16-bit stuff (including
# reset vector) at the top, Intel ME descriptor at the bottom, and U-Boot in
IFDTOOL_FLAGS += -m 0x$(shell $(NM) u-boot |grep _dt_ucode_base_size |cut -d' ' -f1)
IFDTOOL_FLAGS += -U $(CONFIG_SYS_TEXT_BASE):$(objtree)/u-boot.bin
IFDTOOL_FLAGS += -w $(CONFIG_SYS_X86_START16):$(objtree)/u-boot-x86-16bit.bin
+IFDTOOL_FLAGS += -C
ifneq ($(CONFIG_HAVE_INTEL_ME),)
IFDTOOL_ME_FLAGS = -D $(srctree)/board/$(BOARDDIR)/descriptor.bin
u-boot-app.efi: u-boot FORCE
$(call if_changed,zobjcopy)
+u-boot-dtb.bin.o: u-boot-dtb.bin FORCE
+ $(call if_changed,efipayload)
+
+u-boot-payload.lds: $(LDSCRIPT_EFI) FORCE
+ $(call if_changed_dep,cpp_lds)
+
+# Rule to link the EFI payload which contains a stub and a U-Boot binary
+quiet_cmd_u-boot_payload ?= LD $@
+ cmd_u-boot_payload ?= $(LD) $(LDFLAGS_EFI_PAYLOAD) -o $@ \
+ -T u-boot-payload.lds arch/x86/cpu/call32.o \
+ lib/efi/efi.o lib/efi/efi_stub.o u-boot-dtb.bin.o \
+ $(addprefix arch/$(ARCH)/lib/efi/,$(EFISTUB))
+
+u-boot-payload: u-boot-dtb.bin.o u-boot-payload.lds FORCE
+ $(call if_changed,u-boot_payload)
+
+OBJCOPYFLAGS_u-boot-payload.efi := $(OBJCOPYFLAGS_EFI)
+u-boot-payload.efi: u-boot-payload FORCE
+ $(call if_changed,zobjcopy)
+
u-boot-img.bin: spl/u-boot-spl.bin u-boot.img FORCE
$(call if_changed,cat)
$(call if_changed,mkimage)
ifeq ($(ARCH),arm)
+ifdef CONFIG_DM
+UBOOT_BINLOAD := u-boot-dtb.img
+else
UBOOT_BINLOAD := u-boot.img
+endif
else
UBOOT_BINLOAD := u-boot.bin
endif
echo \#define LD_VERSION_STRING \"$$($(LD) --version | head -n 1)\"; )
endef
+# The SOURCE_DATE_EPOCH mechanism requires a date that behaves like GNU date.
+# The BSD date on the other hand behaves different and would produce errors
+# with the misused '-d' switch. Respect that and search a working date with
+# well known pre- and suffixes for the GNU variant of date.
define filechk_timestamp.h
- (SOURCE_DATE="$${SOURCE_DATE_EPOCH:+@$$SOURCE_DATE_EPOCH}"; \
- LC_ALL=C date -u -d "$${SOURCE_DATE:-now}" +'#define U_BOOT_DATE "%b %d %C%y"'; \
- LC_ALL=C date -u -d "$${SOURCE_DATE:-now}" +'#define U_BOOT_TIME "%T"'; \
- LC_ALL=C date -u -d "$${SOURCE_DATE:-now}" +'#define U_BOOT_TZ "%z"' )
+ (if test -n "$${SOURCE_DATE_EPOCH}"; then \
+ SOURCE_DATE="@$${SOURCE_DATE_EPOCH}"; \
+ DATE=""; \
+ for date in gdate date.gnu date; do \
+ $${date} -u -d "$${SOURCE_DATE}" >/dev/null 2>&1 && DATE="$${date}"; \
+ done; \
+ if test -n "$${DATE}"; then \
+ LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_DATE "%b %d %C%y"'; \
+ LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_TIME "%T"'; \
+ LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_TZ "%z"'; \
+ LC_ALL=C $${DATE} -u -d "$${SOURCE_DATE}" +'#define U_BOOT_DMI_DATE "%m/%d/%Y"'; \
+ else \
+ return 42; \
+ fi; \
+ else \
+ LC_ALL=C date +'#define U_BOOT_DATE "%b %d %C%y"'; \
+ LC_ALL=C date +'#define U_BOOT_TIME "%T"'; \
+ LC_ALL=C date +'#define U_BOOT_TZ "%z"'; \
+ LC_ALL=C date +'#define U_BOOT_DMI_DATE "%m/%d/%Y"'; \
+ fi)
endef
$(version_h): include/config/uboot.release FORCE
spl/sunxi-spl.bin: spl/u-boot-spl
@:
+spl/u-boot-spl-dtb.sfp: spl/u-boot-spl
+ @:
+
+spl/boot.bin: spl/u-boot-spl
+ @:
+
tpl/u-boot-tpl.bin: tools prepare
$(Q)$(MAKE) obj=tpl -f $(srctree)/scripts/Makefile.spl all
projects / people / ms / u-boot.git / blobdiff