common: env_sf: Use CONFIG_SF_DEFAULT_xxx as the default value for CONFIG_ENV_SPI_xxx

[people/ms/u-boot.git] / Makefile

diff --git a/Makefile b/Makefile
index 7688e875331072888f7675b5f04c888730eea4de..0b1e8a6f97297e460d7a0c757ac869752aad2cae 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -3,7 +3,7 @@
 #
 
 VERSION = 2017
-PATCHLEVEL = 01
+PATCHLEVEL = 03
 SUBLEVEL =
 EXTRAVERSION = -rc1
 NAME =
@@ -482,6 +482,13 @@ else
 # Build targets only - this includes vmlinux, arch specific targets, clean
 # targets and others. In general all targets except *config targets.
 
+# Additional helpers built in scripts/
+# Carefully list dependencies so we do not try to build scripts twice
+# in parallel
+PHONY += scripts
+scripts: scripts_basic include/config/auto.conf
+       $(Q)$(MAKE) $(build)=$(@)
+
 ifeq ($(dot-config),1)
 # Read in config
 -include include/config/auto.conf
@@ -763,7 +770,11 @@ ALL-$(CONFIG_RAMBOOT_PBL) += u-boot.pbl
 endif
 endif
 ALL-$(CONFIG_SPL) += spl/u-boot-spl.bin
+ifeq ($(CONFIG_MX6)$(CONFIG_SECURE_BOOT), yy)
+ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot-ivt.img
+else
 ALL-$(CONFIG_SPL_FRAMEWORK) += u-boot.img
+endif
 ALL-$(CONFIG_TPL) += tpl/u-boot-tpl.bin
 ALL-$(CONFIG_OF_SEPARATE) += u-boot.dtb
 ifeq ($(CONFIG_SPL_FRAMEWORK),y)
@@ -809,9 +820,11 @@ cmd_zobjcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
 quiet_cmd_efipayload = OBJCOPY $@
 cmd_efipayload = $(OBJCOPY) -I binary -O $(EFIPAYLOAD_BFDTARGET) -B $(EFIPAYLOAD_BFDARCH) $< $@
 
+MKIMAGEOUTPUT ?= /dev/null
+
 quiet_cmd_mkimage = MKIMAGE $@
 cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
-       $(if $(KBUILD_VERBOSE:1=), >/dev/null)
+       $(if $(KBUILD_VERBOSE:1=), >$(MKIMAGEOUTPUT))
 
 quiet_cmd_cat = CAT     $@
 cmd_cat = cat $(filter-out $(PHONY), $^) > $@
@@ -823,6 +836,10 @@ cmd_pad_cat = $(cmd_objcopy) && $(append) || rm -f $@
 
 cfg: u-boot.cfg
 
+quiet_cmd_cfgcheck = CFGCHK  $2
+cmd_cfgcheck = $(srctree)/scripts/check-config.sh $2 \
+               $(srctree)/scripts/config_whitelist.txt $(srctree)
+
 all:           $(ALL-y)
 ifeq ($(CONFIG_DM_I2C_COMPAT)$(CONFIG_SANDBOX),y)
        @echo "===================== WARNING ======================"
@@ -834,8 +851,7 @@ endif
        @# Check that this build does not use CONFIG options that we do not
        @# know about unless they are in Kconfig. All the existing CONFIG
        @# options are whitelisted, so new ones should not be added.
-       $(srctree)/scripts/check-config.sh u-boot.cfg \
-               $(srctree)/scripts/config_whitelist.txt ${srctree} 1>&2
+       $(call cmd,cfgcheck,u-boot.cfg)
 
 PHONY += dtbs
 dtbs: dts/dt.dtb
@@ -877,7 +893,7 @@ u-boot.hex u-boot.srec: u-boot FORCE
        $(call if_changed,objcopy)
 
 OBJCOPYFLAGS_u-boot-nodtb.bin := -O binary \
-               $(if $(CONFIG_X86_RESET_VECTOR),-R .start16 -R .resetvec)
+               $(if $(CONFIG_X86_16BIT_INIT),-R .start16 -R .resetvec)
 
 binary_size_check: u-boot-nodtb.bin FORCE
        @file_size=$(shell wc -c u-boot-nodtb.bin | awk '{print $$1}') ; \
@@ -938,6 +954,11 @@ else
 MKIMAGEFLAGS_u-boot.img = -A $(ARCH) -T firmware -C none -O u-boot \
        -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
        -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
+MKIMAGEFLAGS_u-boot-ivt.img = -A $(ARCH) -T firmware_ivt -C none -O u-boot \
+       -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
+       -n "U-Boot $(UBOOTRELEASE) for $(BOARD) board"
+u-boot-ivt.img: MKIMAGEOUTPUT = u-boot-ivt.img.log
+CLEAN_FILES += u-boot-ivt.img.log u-boot-dtb.imx.log SPL.log u-boot.imx.log
 endif
 
 MKIMAGEFLAGS_u-boot-dtb.img = $(MKIMAGEFLAGS_u-boot.img)
@@ -946,12 +967,13 @@ MKIMAGEFLAGS_u-boot.kwb = -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) \
        -T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE)
 
 MKIMAGEFLAGS_u-boot-spl.kwb = -n $(srctree)/$(CONFIG_SYS_KWD_CONFIG:"%"=%) \
-       -T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE)
+       -T kwbimage -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_TEXT_BASE) \
+       $(if $(KEYDIR),-k $(KEYDIR))
 
 MKIMAGEFLAGS_u-boot.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \
                -R $(srctree)/$(CONFIG_SYS_FSL_PBL_PBI:"%"=%) -T pblimage
 
-u-boot-dtb.img u-boot.img u-boot.kwb u-boot.pbl: \
+u-boot-dtb.img u-boot.img u-boot.kwb u-boot.pbl u-boot-ivt.img: \
                $(if $(CONFIG_SPL_LOAD_FIT),u-boot-nodtb.bin dts/dt.dtb,u-boot.bin) FORCE
        $(call if_changed,mkimage)
 
@@ -1053,50 +1075,11 @@ endif
 
 # x86 uses a large ROM. We fill it with 0xff, put the 16-bit stuff (including
 # reset vector) at the top, Intel ME descriptor at the bottom, and U-Boot in
-# the middle.
+# the middle. This is handled by binman based on an image description in the
+# board's device tree.
 ifneq ($(CONFIG_X86_RESET_VECTOR),)
 rom: u-boot.rom FORCE
 
-IFDTOOL=$(objtree)/tools/ifdtool
-IFDTOOL_FLAGS  = -f 0:$(objtree)/u-boot.dtb
-IFDTOOL_FLAGS += -m 0x$(shell $(NM) u-boot |grep _dt_ucode_base_size |cut -d' ' -f1)
-IFDTOOL_FLAGS += -U $(CONFIG_SYS_TEXT_BASE):$(objtree)/u-boot-nodtb.bin
-IFDTOOL_FLAGS += -w $(CONFIG_SYS_X86_START16):$(objtree)/u-boot-x86-16bit.bin
-IFDTOOL_FLAGS += -C
-
-ifneq ($(CONFIG_HAVE_INTEL_ME),)
-IFDTOOL_ME_FLAGS  = -D $(srctree)/board/$(BOARDDIR)/descriptor.bin
-IFDTOOL_ME_FLAGS += -i ME:$(srctree)/board/$(BOARDDIR)/me.bin
-endif
-
-ifneq ($(CONFIG_HAVE_MRC),)
-IFDTOOL_FLAGS += -w $(CONFIG_X86_MRC_ADDR):$(srctree)/board/$(BOARDDIR)/mrc.bin
-endif
-
-ifneq ($(CONFIG_HAVE_FSP),)
-IFDTOOL_FLAGS += -w $(CONFIG_FSP_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_FSP_FILE)
-endif
-
-ifneq ($(CONFIG_HAVE_CMC),)
-IFDTOOL_FLAGS += -w $(CONFIG_CMC_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_CMC_FILE)
-endif
-
-ifneq ($(CONFIG_HAVE_VGA_BIOS),)
-IFDTOOL_FLAGS += -w $(CONFIG_VGA_BIOS_ADDR):$(srctree)/board/$(BOARDDIR)/$(CONFIG_VGA_BIOS_FILE)
-endif
-
-ifneq ($(CONFIG_HAVE_REFCODE),)
-IFDTOOL_FLAGS += -w $(CONFIG_X86_REFCODE_ADDR):refcode.bin
-endif
-
-quiet_cmd_ifdtool = IFDTOOL $@
-cmd_ifdtool  = $(IFDTOOL) -c -r $(CONFIG_ROM_SIZE) u-boot.tmp;
-ifneq ($(CONFIG_HAVE_INTEL_ME),)
-cmd_ifdtool += $(IFDTOOL) $(IFDTOOL_ME_FLAGS) u-boot.tmp;
-endif
-cmd_ifdtool += $(IFDTOOL) $(IFDTOOL_FLAGS) u-boot.tmp;
-cmd_ifdtool += mv u-boot.tmp $@
-
 refcode.bin: $(srctree)/board/$(BOARDDIR)/refcode.bin FORCE
        $(call if_changed,copy)
 
@@ -1104,9 +1087,10 @@ quiet_cmd_ldr = LD      $@
 cmd_ldr = $(LD) $(LDFLAGS_$(@F)) \
               $(filter-out FORCE,$^) -o $@
 
-u-boot.rom: u-boot-x86-16bit.bin u-boot.bin FORCE \
-               $(if $(CONFIG_HAVE_REFCODE),refcode.bin)
-       $(call if_changed,ifdtool)
+u-boot.rom: u-boot-x86-16bit.bin u-boot.bin \
+               $(if $(CONFIG_SPL_X86_16BIT_INIT),spl/u-boot-spl.bin) \
+               $(if $(CONFIG_HAVE_REFCODE),refcode.bin) FORCE
+       $(call if_changed,binman)
 
 OBJCOPYFLAGS_u-boot-x86-16bit.bin := -O binary -j .start16 -j .resetvec
 u-boot-x86-16bit.bin: u-boot FORCE
@@ -1114,10 +1098,8 @@ u-boot-x86-16bit.bin: u-boot FORCE
 endif
 
 ifneq ($(CONFIG_ARCH_SUNXI),)
-OBJCOPYFLAGS_u-boot-sunxi-with-spl.bin = -I binary -O binary \
-                                  --pad-to=$(CONFIG_SPL_PAD_TO) --gap-fill=0xff
-u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.img FORCE
-       $(call if_changed,pad_cat)
+u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.img u-boot.dtb FORCE
+       $(call if_changed,binman)
 endif
 
 ifneq ($(CONFIG_TEGRA),)
@@ -1446,7 +1428,7 @@ CLEAN_DIRS  += $(MODVERDIR) \
               $(foreach d, spl tpl, $(patsubst %,$d/%, \
                        $(filter-out include, $(shell ls -1 $d 2>/dev/null))))
 
-CLEAN_FILES += include/bmp_logo.h include/bmp_logo_data.h include/license.h \
+CLEAN_FILES += include/bmp_logo.h include/bmp_logo_data.h \
               boot* u-boot* MLO* SPL System.map
 
 # Directories & files removed with 'make mrproper'
@@ -1567,11 +1549,6 @@ tests:
        $(Q)$(MAKE) $(build)=scripts build_docproc
        $(Q)$(MAKE) $(build)=doc/DocBook $@
 
-# Dummies...
-PHONY += prepare scripts
-prepare: ;
-scripts: ;
-
 endif #ifeq ($(config-targets),1)
 endif #ifeq ($(mixed-targets),1)