axs10x: Get rid of both I2C and EEPROM who used to use I2C

[people/ms/u-boot.git] / Makefile

diff --git a/Makefile b/Makefile
index 8d4e6050b37d07a145d7a23bcf475d0c0cf6b6b9..2385285bb87e8b4ba1d58f5702c738622e0c72f9 100644 (file)
--- a/Makefile
+++ b/Makefile
@@ -3,9 +3,9 @@
 #
 
 VERSION = 2017
-PATCHLEVEL = 05
+PATCHLEVEL = 07
 SUBLEVEL =
-EXTRAVERSION = -rc1
+EXTRAVERSION = -rc2
 NAME =
 
 # *DOCUMENTATION*
@@ -653,7 +653,6 @@ libs-y += drivers/
 libs-y += drivers/dma/
 libs-y += drivers/gpio/
 libs-y += drivers/i2c/
-libs-y += drivers/mmc/
 libs-y += drivers/mtd/
 libs-$(CONFIG_CMD_NAND) += drivers/mtd/nand/
 libs-y += drivers/mtd/onenand/
@@ -747,6 +746,9 @@ BOARD_SIZE_CHECK =
 endif
 
 # Statically apply RELA-style relocations (currently arm64 only)
+# This is useful for arm64 where static relocation needs to be performed on
+# the raw binary, but certain simulators only accept an ELF file (but don't
+# do the relocation).
 ifneq ($(CONFIG_STATIC_RELA),)
 # $(1) is u-boot ELF, $(2) is u-boot bin, $(3) is text base
 DO_STATIC_RELA = \
@@ -831,6 +833,10 @@ quiet_cmd_mkimage = MKIMAGE $@
 cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
        $(if $(KBUILD_VERBOSE:1=), >$(MKIMAGEOUTPUT))
 
+quiet_cmd_mkfitimage = MKIMAGE $@
+cmd_mkfitimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -f $(U_BOOT_ITS) -E $@ \
+       $(if $(KBUILD_VERBOSE:1=), >$(MKIMAGEOUTPUT))
+
 quiet_cmd_cat = CAT     $@
 cmd_cat = cat $(filter-out $(PHONY), $^) > $@
 
@@ -950,6 +956,19 @@ quiet_cmd_cpp_cfg = CFG     $@
 cmd_cpp_cfg = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) -ansi \
        -DDO_DEPS_ONLY -D__ASSEMBLY__ -x assembler-with-cpp -P -dM -E -o $@ $<
 
+# Boards with more complex image requirments can provide an .its source file
+# or a generator script
+ifneq ($(CONFIG_SPL_FIT_SOURCE),"")
+U_BOOT_ITS = $(subst ",,$(CONFIG_SPL_FIT_SOURCE))
+else
+ifneq ($(CONFIG_SPL_FIT_GENERATOR),"")
+U_BOOT_ITS := u-boot.its
+$(U_BOOT_ITS): FORCE
+       $(srctree)/$(CONFIG_SPL_FIT_GENERATOR) \
+       $(patsubst %,arch/$(ARCH)/dts/%.dtb,$(subst ",,$(CONFIG_OF_LIST))) > $@
+endif
+endif
+
 ifdef CONFIG_SPL_LOAD_FIT
 MKIMAGEFLAGS_u-boot.img = -f auto -A $(ARCH) -T firmware -C none -O u-boot \
        -a $(CONFIG_SYS_TEXT_BASE) -e $(CONFIG_SYS_UBOOT_START) \
@@ -982,6 +1001,9 @@ u-boot-dtb.img u-boot.img u-boot.kwb u-boot.pbl u-boot-ivt.img: \
                $(if $(CONFIG_SPL_LOAD_FIT),u-boot-nodtb.bin dts/dt.dtb,u-boot.bin) FORCE
        $(call if_changed,mkimage)
 
+u-boot.itb: u-boot-nodtb.bin dts/dt.dtb $(U_BOOT_ITS) FORCE
+       $(call if_changed,mkfitimage)
+
 u-boot-spl.kwb: u-boot.img spl/u-boot-spl.bin FORCE
        $(call if_changed,mkimage)
 
@@ -1094,7 +1116,7 @@ cmd_ldr = $(LD) $(LDFLAGS_$(@F)) \
 
 u-boot.rom: u-boot-x86-16bit.bin u-boot.bin \
                $(if $(CONFIG_SPL_X86_16BIT_INIT),spl/u-boot-spl.bin) \
-               $(if $(CONFIG_HAVE_REFCODE),refcode.bin) FORCE
+               $(if $(CONFIG_HAVE_REFCODE),refcode.bin) checkbinman FORCE
        $(call if_changed,binman)
 
 OBJCOPYFLAGS_u-boot-x86-16bit.bin := -O binary -j .start16 -j .resetvec
@@ -1103,7 +1125,8 @@ u-boot-x86-16bit.bin: u-boot FORCE
 endif
 
 ifneq ($(CONFIG_ARCH_SUNXI),)
-u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.img u-boot.dtb FORCE
+u-boot-sunxi-with-spl.bin: spl/sunxi-spl.bin u-boot.img u-boot.dtb \
+               checkbinman FORCE
        $(call if_changed,binman)
 endif
 
@@ -1180,17 +1203,17 @@ OBJCOPYFLAGS_u-boot-img-spl-at-end.bin := -I binary -O binary \
 u-boot-img-spl-at-end.bin: u-boot.img spl/u-boot-spl.bin FORCE
        $(call if_changed,pad_cat)
 
-# Create a new ELF from a raw binary file.  This is useful for arm64
-# where static relocation needs to be performed on the raw binary,
-# but certain simulators only accept an ELF file (but don't do the
-# relocation).
-# FIXME refactor dts/Makefile to share target/arch detection
+# Create a new ELF from a raw binary file.
+ifndef PLATFORM_ELFENTRY
+  PLATFORM_ELFENTRY = "_start"
+endif
+quiet_cmd_u-boot-elf ?= LD      $@
+       cmd_u-boot-elf ?= $(LD) u-boot-elf.o -o $@ \
+       --defsym=$(PLATFORM_ELFENTRY)=$(CONFIG_SYS_TEXT_BASE) \
+       -Ttext=$(CONFIG_SYS_TEXT_BASE)
 u-boot.elf: u-boot.bin
-       @$(OBJCOPY)  -B aarch64 -I binary -O elf64-littleaarch64 \
-               $< u-boot-elf.o
-       @$(LD) u-boot-elf.o -o $@ \
-               --defsym=_start=$(CONFIG_SYS_TEXT_BASE) \
-               -Ttext=$(CONFIG_SYS_TEXT_BASE)
+       $(Q)$(OBJCOPY) -I binary $(PLATFORM_ELFFLAGS) $< u-boot-elf.o
+       $(call if_changed,u-boot-elf)
 
 # Rule to link u-boot
 # May be overridden by arch/$(ARCH)/config.mk
@@ -1332,6 +1355,18 @@ $(version_h): include/config/uboot.release FORCE
 $(timestamp_h): $(srctree)/Makefile FORCE
        $(call filechk,timestamp.h)
 
+checkbinman: tools
+       @if ! ( echo 'import libfdt' | ( PYTHONPATH=tools python )); then \
+               echo >&2; \
+               echo >&2 '*** binman needs the Python libfdt library.'; \
+               echo >&2 '*** Either install it on your system, or try:'; \
+               echo >&2 '***'; \
+               echo >&2 '*** sudo apt-get install swig libpython-dev'; \
+               echo >&2 '***'; \
+               echo >&2 '*** to have U-Boot build its own version.'; \
+               false; \
+       fi
+
 # ---------------------------------------------------------------------------
 quiet_cmd_cpp_lds = LDS     $@
 cmd_cpp_lds = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) \