mx6qsabreauto: Fix the EIM clock for the mx6qp variant

[people/ms/u-boot.git] / README

diff --git a/README b/README
index 7443b9fd41fe151ca3afa3a51a33eadc0f747557..0bd6e6cb92601de3d733f7337d3847f034bb437a 100644 (file)
--- a/README
+++ b/README
@@ -127,7 +127,7 @@ releases in "stable" maintenance trees.
 Examples:
        U-Boot v2009.11     - Release November 2009
        U-Boot v2009.11.1   - Release 1 in version November 2009 stable tree
-       U-Boot v2010.09-rc1 - Release candiate 1 for September 2010 release
+       U-Boot v2010.09-rc1 - Release candidate 1 for September 2010 release
 
 
 Directory Hierarchy:
@@ -770,11 +770,6 @@ The following options need to be configured:
                port routines must be defined elsewhere
                (i.e. serial_init(), serial_getc(), ...)
 
-               CONFIG_SYS_CONSOLE_BG_COL: define the backgroundcolor, default
-                       is 0x00.
-               CONFIG_SYS_CONSOLE_FG_COL: define the foregroundcolor, default
-                       is 0xa0.
-
 - Console Baudrate:
                CONFIG_BAUDRATE - in bps
                Select one of the baudrates listed in
@@ -1594,7 +1589,7 @@ The following options need to be configured:
                This will also enable the command "fatwrite" enabling the
                user to write files to FAT.
 
-CBFS (Coreboot Filesystem) support
+- CBFS (Coreboot Filesystem) support:
                CONFIG_CMD_CBFS
 
                Define this to enable support for reading from a Coreboot
@@ -1619,17 +1614,6 @@ CBFS (Coreboot Filesystem) support
                instead.
 
 - Video support:
-               CONFIG_VIDEO_SMI_LYNXEM
-               Enable Silicon Motion SMI 712/710/810 Video chip. The
-               video output is selected via environment 'videoout'
-               (1 = LCD and 2 = CRT). If videoout is undefined, CRT is
-               assumed.
-
-               CONFIG_VIDEO_SED13806
-               Enable Epson SED13806 driver. This driver supports 8bpp
-               and 16bpp modes defined by CONFIG_VIDEO_SED13806_8BPP
-               or CONFIG_VIDEO_SED13806_16BPP
-
                CONFIG_FSL_DIU_FB
                Enable the Freescale DIU video driver.  Reference boards for
                SOCs that have a DIU should define this macro to enable DIU
@@ -1709,12 +1693,6 @@ CBFS (Coreboot Filesystem) support
                here, since it is cheaper to change data cache settings on
                a per-section basis.
 
-               CONFIG_CONSOLE_SCROLL_LINES
-
-               When the console need to be scrolled, this is the number of
-               lines to scroll by. It defaults to 1. Increasing this makes
-               the console jump but can help speed up operation when scrolling
-               is slow.
 
                CONFIG_LCD_ROTATION
 
@@ -3360,11 +3338,6 @@ FIT uImage format:
                CONFIG_SPL_INIT_MINIMAL
                Arch init code should be built for a very small image
 
-               CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR,
-               CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS,
-               Address and partition on the MMC to load U-Boot from
-               when the MMC is being used in raw mode.
-
                CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION
                Partition on the MMC to load U-Boot from when the MMC is being
                used in raw mode
@@ -3549,15 +3522,6 @@ Configuration Settings:
 - CONFIG_SYS_BAUDRATE_TABLE:
                List of legal baudrate settings for this board.
 
-- CONFIG_SYS_CONSOLE_INFO_QUIET
-               Suppress display of console information at boot.
-
-- CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
-               Enable the call to overwrite_console().
-
-- CONFIG_SYS_CONSOLE_ENV_OVERWRITE
-               Enable overwrite of previous console environment settings.
-
 - CONFIG_SYS_MEMTEST_START, CONFIG_SYS_MEMTEST_END:
                Begin and End addresses of the area used by the
                simple memory test.
@@ -4146,7 +4110,7 @@ but it can not erase, write this NOR flash by SRIO or PCIE interface.
 
          Define this to a string that is the name of the block device.
 
-       - FAT_ENV_DEV_AND_PART:
+       - FAT_ENV_DEVICE_AND_PART:
 
          Define this to a string to specify the partition of the device. It can
          be as following:
@@ -4629,12 +4593,6 @@ Low Level (hardware related) configuration options:
                addressable memory. This option causes some memory accesses
                to be mapped through map_sysmem() / unmap_sysmem().
 
-- CONFIG_USE_ARCH_MEMCPY
-  CONFIG_USE_ARCH_MEMSET
-               If these options are used a optimized version of memcpy/memset will
-               be used if available. These functions may be faster under some
-               conditions but may increase the binary size.
-
 - CONFIG_X86_RESET_VECTOR
                If defined, the x86 reset vector code is included. This is not
                needed when U-Boot is running from Coreboot.