arm: imx6q: Add Engicam i.CoreM6 Solo/Duallite RQS Starter Kit initial support

[people/ms/u-boot.git] / README

diff --git a/README b/README
index b4dc217142407c53f5a0925c34c13e6ff3d12c16..25cad2ff01962e0fb7a540773b0a028b08761181 100644 (file)
--- a/README
+++ b/README
@@ -127,7 +127,7 @@ releases in "stable" maintenance trees.
 Examples:
        U-Boot v2009.11     - Release November 2009
        U-Boot v2009.11.1   - Release 1 in version November 2009 stable tree
-       U-Boot v2010.09-rc1 - Release candiate 1 for September 2010 release
+       U-Boot v2010.09-rc1 - Release candidate 1 for September 2010 release
 
 
 Directory Hierarchy:
@@ -770,15 +770,6 @@ The following options need to be configured:
                port routines must be defined elsewhere
                (i.e. serial_init(), serial_getc(), ...)
 
-               When CONFIG_CFB_CONSOLE_ANSI is defined, console will support
-               a limited number of ANSI escape sequences (cursor control,
-               erase functions and limited graphics rendition control).
-
-               CONFIG_SYS_CONSOLE_BG_COL: define the backgroundcolor, default
-                       is 0x00.
-               CONFIG_SYS_CONSOLE_FG_COL: define the foregroundcolor, default
-                       is 0xa0.
-
 - Console Baudrate:
                CONFIG_BAUDRATE - in bps
                Select one of the baudrates listed in
@@ -1598,7 +1589,7 @@ The following options need to be configured:
                This will also enable the command "fatwrite" enabling the
                user to write files to FAT.
 
-CBFS (Coreboot Filesystem) support
+- CBFS (Coreboot Filesystem) support:
                CONFIG_CMD_CBFS
 
                Define this to enable support for reading from a Coreboot
@@ -1623,40 +1614,6 @@ CBFS (Coreboot Filesystem) support
                instead.
 
 - Video support:
-               CONFIG_VIDEO_CT69000
-
-               Enable Chips & Technologies 69000 Video chip
-
-               CONFIG_VIDEO_SMI_LYNXEM
-               Enable Silicon Motion SMI 712/710/810 Video chip. The
-               video output is selected via environment 'videoout'
-               (1 = LCD and 2 = CRT). If videoout is undefined, CRT is
-               assumed.
-
-               For the CT69000 and SMI_LYNXEM drivers, videomode is
-               selected via environment 'videomode'. Two different ways
-               are possible:
-               - "videomode=num"   'num' is a standard LiLo mode numbers.
-               Following standard modes are supported  (* is default):
-
-                     Colors    640x480 800x600 1024x768 1152x864 1280x1024
-               -------------+---------------------------------------------
-                     8 bits |  0x301*  0x303    0x305    0x161     0x307
-                    15 bits |  0x310   0x313    0x316    0x162     0x319
-                    16 bits |  0x311   0x314    0x317    0x163     0x31A
-                    24 bits |  0x312   0x315    0x318      ?       0x31B
-               -------------+---------------------------------------------
-               (i.e. setenv videomode 317; saveenv; reset;)
-
-               - "videomode=bootargs" all the video parameters are parsed
-               from the bootargs. (See drivers/video/videomodes.c)
-
-
-               CONFIG_VIDEO_SED13806
-               Enable Epson SED13806 driver. This driver supports 8bpp
-               and 16bpp modes defined by CONFIG_VIDEO_SED13806_8BPP
-               or CONFIG_VIDEO_SED13806_16BPP
-
                CONFIG_FSL_DIU_FB
                Enable the Freescale DIU video driver.  Reference boards for
                SOCs that have a DIU should define this macro to enable DIU
@@ -1736,12 +1693,6 @@ CBFS (Coreboot Filesystem) support
                here, since it is cheaper to change data cache settings on
                a per-section basis.
 
-               CONFIG_CONSOLE_SCROLL_LINES
-
-               When the console need to be scrolled, this is the number of
-               lines to scroll by. It defaults to 1. Increasing this makes
-               the console jump but can help speed up operation when scrolling
-               is slow.
 
                CONFIG_LCD_ROTATION
 
@@ -3387,11 +3338,6 @@ FIT uImage format:
                CONFIG_SPL_INIT_MINIMAL
                Arch init code should be built for a very small image
 
-               CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR,
-               CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS,
-               Address and partition on the MMC to load U-Boot from
-               when the MMC is being used in raw mode.
-
                CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION
                Partition on the MMC to load U-Boot from when the MMC is being
                used in raw mode
@@ -3576,15 +3522,6 @@ Configuration Settings:
 - CONFIG_SYS_BAUDRATE_TABLE:
                List of legal baudrate settings for this board.
 
-- CONFIG_SYS_CONSOLE_INFO_QUIET
-               Suppress display of console information at boot.
-
-- CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
-               Enable the call to overwrite_console().
-
-- CONFIG_SYS_CONSOLE_ENV_OVERWRITE
-               Enable overwrite of previous console environment settings.
-
 - CONFIG_SYS_MEMTEST_START, CONFIG_SYS_MEMTEST_END:
                Begin and End addresses of the area used by the
                simple memory test.
@@ -4173,7 +4110,7 @@ but it can not erase, write this NOR flash by SRIO or PCIE interface.
 
          Define this to a string that is the name of the block device.
 
-       - FAT_ENV_DEV_AND_PART:
+       - FAT_ENV_DEVICE_AND_PART:
 
          Define this to a string to specify the partition of the device. It can
          be as following: