gpio/hsdk: Depend on DM_GPIO instead of simple DM

[people/ms/u-boot.git] / README

diff --git a/README b/README
index 1b31d0e58f5fe2910ad9fa536cc3710974df604e..2df0e1f8a78e66f075a6c5c0991402440f064c4f 100644 (file)
--- a/README
+++ b/README
@@ -312,6 +312,19 @@ Many of the options are named exactly as the corresponding Linux
 kernel configuration options. The intention is to make it easier to
 build a config tool - later.
 
+- ARM Platform Bus Type(CCI):
+               CoreLink Cache Coherent Interconnect (CCI) is ARM BUS which
+               provides full cache coherency between two clusters of multi-core
+               CPUs and I/O coherency for devices and I/O masters
+
+               CONFIG_SYS_FSL_HAS_CCI400
+
+               Defined For SoC that has cache coherent interconnect
+               CCN-400
+
+               CONFIG_SYS_FSL_HAS_CCN504
+
+               Defined for SoC that has cache coherent interconnect CCN-504
 
 The following options need to be configured:
 
@@ -776,7 +789,7 @@ The following options need to be configured:
                binary in its image. This device tree file should be in the
                board directory and called <soc>-<board>.dts. The binary file
                is then picked up in board_init_f() and made available through
-               the global data structure as gd->blob.
+               the global data structure as gd->fdt_blob.
 
                CONFIG_OF_SEPARATE
                If this variable is defined, U-Boot will build a device tree
@@ -1015,21 +1028,6 @@ The following options need to be configured:
                        control registers. This behavior won't affect the
                        correctnessof 10/100 link speed update.
 
-               CONFIG_SMC911X
-               Support for SMSC's LAN911x and LAN921x chips
-
-                       CONFIG_SMC911X_BASE
-                       Define this to hold the physical address
-                       of the device (I/O space)
-
-                       CONFIG_SMC911X_32_BIT
-                       Define this if data bus is 32 bits
-
-                       CONFIG_SMC911X_16_BIT
-                       Define this if data bus is 16 bits. If your processor
-                       automatically converts one 32 bit word to two 16 bit
-                       words you may also try CONFIG_SMC911X_32_BIT.
-
                CONFIG_SH_ETHER
                Support for Renesas on-chip Ethernet controller
 
@@ -2299,13 +2297,6 @@ The following options need to be configured:
                this is instead controlled by the value of
                /config/load-environment.
 
-- DataFlash Support:
-               CONFIG_HAS_DATAFLASH
-
-               Defining this option enables DataFlash features and
-               allows to read/write in Dataflash via the standard
-               commands cp, md...
-
 - Serial Flash support
                Usage requires an initial 'sf probe' to define the serial
                flash parameters, followed by read/write/erase/update
@@ -2371,6 +2362,13 @@ The following options need to be configured:
                        CONFIG_SYS_BOOTCOUNT_ADDR = i2c addr which is used for
                                                    the bootcounter.
                        CONFIG_BOOTCOUNT_ALEN = address len
+               CONFIG_BOOTCOUNT_EXT
+               enable support for the bootcounter in EXT filesystem
+                       CONFIG_SYS_BOOTCOUNT_ADDR = RAM address used for read
+                                                    and write.
+                       CONFIG_SYS_BOOTCOUNT_EXT_INTERFACE = interface
+                       CONFIG_SYS_BOOTCOUNT_EXT_DEVPART = device and part
+                       CONFIG_SYS_BOOTCOUNT_EXT_NAME = filename
 
 - Show boot progress:
                CONFIG_SHOW_BOOT_PROGRESS
@@ -2835,10 +2833,6 @@ FIT uImage format:
                Define this if you need to first read the OOB and then the
                data. This is used, for example, on davinci platforms.
 
-               CONFIG_SPL_OMAP3_ID_NAND
-               Support for an OMAP3-specific set of functions to return the
-               ID and MFR of the first attached NAND chip, if present.
-
                CONFIG_SPL_RAM_DEVICE
                Support for running image already present in ram, in SPL binary
 
@@ -5165,7 +5159,7 @@ may be rejected, even when they contain important and valuable stuff.
 Please see http://www.denx.de/wiki/U-Boot/Patches for details.
 
 Patches shall be sent to the u-boot mailing list <u-boot@lists.denx.de>;
-see http://lists.denx.de/mailman/listinfo/u-boot
+see https://lists.denx.de/listinfo/u-boot
 
 When you send a patch, please include the following information with
 it: