rockchip: dts: rk3399-puma: add a 'tsd, usb-port-power' stringlist for USB1

[people/ms/u-boot.git] / README

diff --git a/README b/README
index 242287ca9b930c6a33a8bd9b523b8b48d22da856..2df0e1f8a78e66f075a6c5c0991402440f064c4f 100644 (file)
--- a/README
+++ b/README
@@ -1028,21 +1028,6 @@ The following options need to be configured:
                        control registers. This behavior won't affect the
                        correctnessof 10/100 link speed update.
 
-               CONFIG_SMC911X
-               Support for SMSC's LAN911x and LAN921x chips
-
-                       CONFIG_SMC911X_BASE
-                       Define this to hold the physical address
-                       of the device (I/O space)
-
-                       CONFIG_SMC911X_32_BIT
-                       Define this if data bus is 32 bits
-
-                       CONFIG_SMC911X_16_BIT
-                       Define this if data bus is 16 bits. If your processor
-                       automatically converts one 32 bit word to two 16 bit
-                       words you may also try CONFIG_SMC911X_32_BIT.
-
                CONFIG_SH_ETHER
                Support for Renesas on-chip Ethernet controller
 
@@ -2377,6 +2362,13 @@ The following options need to be configured:
                        CONFIG_SYS_BOOTCOUNT_ADDR = i2c addr which is used for
                                                    the bootcounter.
                        CONFIG_BOOTCOUNT_ALEN = address len
+               CONFIG_BOOTCOUNT_EXT
+               enable support for the bootcounter in EXT filesystem
+                       CONFIG_SYS_BOOTCOUNT_ADDR = RAM address used for read
+                                                    and write.
+                       CONFIG_SYS_BOOTCOUNT_EXT_INTERFACE = interface
+                       CONFIG_SYS_BOOTCOUNT_EXT_DEVPART = device and part
+                       CONFIG_SYS_BOOTCOUNT_EXT_NAME = filename
 
 - Show boot progress:
                CONFIG_SHOW_BOOT_PROGRESS
@@ -5167,7 +5159,7 @@ may be rejected, even when they contain important and valuable stuff.
 Please see http://www.denx.de/wiki/U-Boot/Patches for details.
 
 Patches shall be sent to the u-boot mailing list <u-boot@lists.denx.de>;
-see http://lists.denx.de/mailman/listinfo/u-boot
+see https://lists.denx.de/listinfo/u-boot
 
 When you send a patch, please include the following information with
 it: