net/ethoc: add Kconfig entry for the driver

[people/ms/u-boot.git] / README

diff --git a/README b/README
index af37d4125f257fe9e89709f51cde7227b9320d26..30d7ee3970cd096d5e713084eb3b3bc4ef69b779 100644 (file)
--- a/README
+++ b/README
@@ -511,7 +511,7 @@ The following options need to be configured:
                implemetation.
 
                CONFIG_SYS_FSL_DDR2
-               Board config to use DDR2. It can be eanbeld for SoCs with
+               Board config to use DDR2. It can be enabled for SoCs with
                Freescale DDR2 or DDR3 controllers, depending on the board
                implementation.
 
@@ -840,6 +840,9 @@ The following options need to be configured:
                        CONFIG_CONSOLE_EXTRA_INFO
                                                additional board info beside
                                                the logo
+                       CONFIG_HIDE_LOGO_VERSION
+                                               do not display bootloader
+                                               version string
 
                When CONFIG_CFB_CONSOLE_ANSI is defined, console will support
                a limited number of ANSI escape sequences (cursor control,
@@ -2753,7 +2756,7 @@ CBFS (Coreboot Filesystem) support
                with a special header) as build targets. By defining
                CONFIG_BUILD_TARGET in the SoC / board header, this
                special image will be automatically built upon calling
-               make / MAKEALL.
+               make / buildman.
 
                CONFIG_IDENT_STRING
 
@@ -3583,6 +3586,10 @@ FIT uImage format:
                Support for NAND boot using simple NAND drivers that
                expose the cmd_ctrl() interface.
 
+               CONFIG_SPL_UBI
+               Support for a lightweight UBI (fastmap) scanner and
+               loader
+
                CONFIG_SPL_MTD_SUPPORT
                Support for the MTD subsystem within SPL.  Useful for
                environment on NAND support within SPL.
@@ -3836,9 +3843,6 @@ Configuration Settings:
                The memory will be freed (or in fact just forgotten) when
                U-Boot relocates itself.
 
-               Pre-relocation malloc() is only supported on ARM and sandbox
-               at present but is fairly easy to enable for other archs.
-
 - CONFIG_SYS_MALLOC_SIMPLE
                Provides a simple and small malloc() and calloc() for those
                boards which do not use the full malloc in SPL (which is
@@ -4810,7 +4814,7 @@ Low Level (hardware related) configuration options:
 
 - CONFIG_SKIP_LOWLEVEL_INIT_ONLY
                [ARM926EJ-S only] This allows just the call to lowlevel_init()
-               to be skipped. The normal CPU15 init (such as enabling the
+               to be skipped. The normal CP15 init (such as enabling the
                instruction cache) is still performed.
 
 - CONFIG_SPL_BUILD
@@ -5079,33 +5083,10 @@ official or latest in the git repository) version of U-Boot sources.
 But before you submit such a patch, please verify that your modifi-
 cation did not break existing code. At least make sure that *ALL* of
 the supported boards compile WITHOUT ANY compiler warnings. To do so,
-just run the "MAKEALL" script, which will configure and build U-Boot
-for ALL supported system. Be warned, this will take a while. You can
-select which (cross) compiler to use by passing a `CROSS_COMPILE'
-environment variable to the script, i. e. to use the ELDK cross tools
-you can type
-
-       CROSS_COMPILE=ppc_8xx- MAKEALL
-
-or to build on a native PowerPC system you can type
-
-       CROSS_COMPILE=' ' MAKEALL
-
-When using the MAKEALL script, the default behaviour is to build
-U-Boot in the source directory. This location can be changed by
-setting the BUILD_DIR environment variable. Also, for each target
-built, the MAKEALL script saves two log files (<target>.ERR and
-<target>.MAKEALL) in the <source dir>/LOG directory. This default
-location can be changed by setting the MAKEALL_LOGDIR environment
-variable. For example:
-
-       export BUILD_DIR=/tmp/build
-       export MAKEALL_LOGDIR=/tmp/log
-       CROSS_COMPILE=ppc_8xx- MAKEALL
-
-With the above settings build objects are saved in the /tmp/build,
-log files are saved in the /tmp/log and the source tree remains clean
-during the whole build process.
+just run the buildman script (tools/buildman/buildman), which will
+configure and build U-Boot for ALL supported system. Be warned, this
+will take a while. Please see the buildman README, or run 'buildman -H'
+for documentation.
 
 
 See also "U-Boot Porting Guide" below.
@@ -6561,7 +6542,7 @@ it:
 
 Notes:
 
-* Before sending the patch, run the MAKEALL script on your patched
+* Before sending the patch, run the buildman script on your patched
   source tree and make sure that no errors or warnings are reported
   for any of the boards.