Convert CONFIG_BOOTCOUNT_EXT to Kconfig

[people/ms/u-boot.git] / README

diff --git a/README b/README
index cce59ad7c05e23c8f95d989a9f3e41b9ea6ef048..4b2e97652e5b7aa6165c97fdec06548d687af65d 100644 (file)
--- a/README
+++ b/README
@@ -713,17 +713,6 @@ The following options need to be configured:
                as a convenience, when switching between booting from
                RAM and NFS.
 
-- Bootcount:
-               CONFIG_BOOTCOUNT_ENV
-               If no softreset save registers are found on the hardware
-               "bootcount" is stored in the environment. To prevent a
-               saveenv on all reboots, the environment variable
-               "upgrade_available" is used. If "upgrade_available" is
-               0, "bootcount" is always 0, if "upgrade_available" is
-               1 "bootcount" is incremented in the environment.
-               So the Userspace Applikation must set the "upgrade_available"
-               and "bootcount" variable to 0, if a boot was successfully.
-
 - Pre-Boot Commands:
                CONFIG_PREBOOT
 
@@ -2281,23 +2270,6 @@ The following options need to be configured:
 - bootcount support:
                CONFIG_AT91SAM9XE
                enable special bootcounter support on at91sam9xe based boards.
-               CONFIG_SOC_DA8XX
-               enable special bootcounter support on da850 based boards.
-               CONFIG_BOOTCOUNT_RAM
-               enable support for the bootcounter in RAM
-               CONFIG_BOOTCOUNT_I2C
-               enable support for the bootcounter on an i2c (like RTC) device.
-                       CONFIG_SYS_I2C_RTC_ADDR = i2c chip address
-                       CONFIG_SYS_BOOTCOUNT_ADDR = i2c addr which is used for
-                                                   the bootcounter.
-                       CONFIG_BOOTCOUNT_ALEN = address len
-               CONFIG_BOOTCOUNT_EXT
-               enable support for the bootcounter in EXT filesystem
-                       CONFIG_SYS_BOOTCOUNT_ADDR = RAM address used for read
-                                                    and write.
-                       CONFIG_SYS_BOOTCOUNT_EXT_INTERFACE = interface
-                       CONFIG_SYS_BOOTCOUNT_EXT_DEVPART = device and part
-                       CONFIG_SYS_BOOTCOUNT_EXT_NAME = filename
 
 - Show boot progress:
                CONFIG_SHOW_BOOT_PROGRESS