- arm925t Files specific to ARM 925 CPUs
- arm926ejs Files specific to ARM 926 CPUs
- arm1136 Files specific to ARM 1136 CPUs
+ - at32ap Files specific to Atmel AVR32 AP CPUs
- i386 Files specific to i386 CPUs
- ixp Files specific to Intel XScale IXP CPUs
- mcf52x2 Files specific to Freescale ColdFire MCF52x2 CPUs
- examples Example code for standalone applications, etc.
- include Header Files
- lib_arm Files generic to ARM architecture
+- lib_avr32 Files generic to AVR32 architecture
- lib_generic Files generic to all architectures
- lib_i386 Files generic to i386 architecture
- lib_m68k Files generic to m68k architecture
----------------------
CONFIG_NIOS2
+ AVR32 based CPUs:
+ ----------------------
+ CONFIG_AT32AP
- Board Type: Define exactly one of
CONFIG_ARMADILLO, CONFIG_AT91RM9200DK, CONFIG_CERF250,
CONFIG_CSB637, CONFIG_DELTA, CONFIG_DNP1110,
- CONFIG_EP7312, CONFIG_H2_OMAP1610, CONFIG_HHP_CRADLE,
+ CONFIG_EP7312, CONFIG_H2_OMAP1610, CONFIG_HHP_CRADLE,
CONFIG_IMPA7, CONFIG_INNOVATOROMAP1510, CONFIG_INNOVATOROMAP1610,
CONFIG_KB9202, CONFIG_LART, CONFIG_LPD7A400,
CONFIG_LUBBOCK, CONFIG_OSK_OMAP5912, CONFIG_OMAP2420H4,
CONFIG_PCI5441 CONFIG_PK1C20
CONFIG_EP1C20 CONFIG_EP1S10 CONFIG_EP1S40
+ AVR32 based boards:
+ -------------------
+
+ CONFIG_ATSTK1000
+
+- CPU Daughterboard Type: (if CONFIG_ATSTK1000 is defined)
+ Define exactly one of
+ CONFIG_ATSTK1002
+
- CPU Module Type: (if CONFIG_COGENT is defined)
Define exactly one of
clock chips. See common/cmd_i2c.c for a description of the
command line interface.
- CONFIG_HARD_I2C selects the CPM hardware driver for I2C.
+ CONFIG_I2C_CMD_TREE is a recommended option that places
+ all I2C commands under a single 'i2c' root command. The
+ older 'imm', 'imd', 'iprobe' etc. commands are considered
+ deprecated and may disappear in the future.
+
+ CONFIG_HARD_I2C selects a hardware I2C controller.
CONFIG_SOFT_I2C configures u-boot to use a software (aka
bit-banging) driver instead of CPM or similar hardware
in u-boot bd_info structure based on u-boot environment
variable "i2cfast". (see also i2cfast)
+ CONFIG_I2C_MULTI_BUS
+
+ This option allows the use of multiple I2C buses, each of which
+ must have a controller. At any point in time, only one bus is
+ active. To switch to a different bus, use the 'i2c dev' command.
+ Note that bus numbering is zero-based.
+
+ CFG_I2C_NOPROBES
+
+ This option specifies a list of I2C devices that will be skipped
+ when the 'i2c probe' command is issued (or 'iprobe' using the legacy
+ command). If CONFIG_I2C_MULTI_BUS is set, specify a list of bus-device
+ pairs. Otherwise, specify a 1D array of device addresses
+
+ e.g.
+ #undef CONFIG_I2C_MULTI_BUS
+ #define CFG_I2C_NOPROBES {0x50,0x68}
+
+ will skip addresses 0x50 and 0x68 on a board with one I2C bus
+
+ #define CONFIG_I2C_MULTI_BUS
+ #define CFG_I2C_MULTI_NOPROBES {{0,0x50},{0,0x68},{1,0x54}}
+
+ will skip addresses 0x50 and 0x68 on bus 0 and address 0x54 on bus 1
+
- SPI Support: CONFIG_SPI
Enables SPI driver (so far only tested with
default value of 5 is used.
- Command Interpreter:
- CFG_AUTO_COMPLETE
+ CONFIG_AUTO_COMPLETE
Enable auto completion of commands using TAB.
+ Note that this feature has NOT been implemented yet
+ for the "hush" shell.
+
+
CFG_HUSH_PARSER
Define this variable to enable the "hush" shell (from
of the backslashes before semicolons and special
symbols.
+- Commandline Editing and History:
+ CONFIG_CMDLINE_EDITING
+
+ Enable editiong and History functions for interactive
+ commandline input operations
+
- Default Environment:
CONFIG_EXTRA_ENV_SETTINGS
CFG_POCMR2_MASK_ATTRIB: (MPC826x only)
Overrides the default PCI memory map in cpu/mpc8260/pci.c if set.
+- CONFIG_SPD_EEPROM
+ Get DDR timing information from an I2C EEPROM. Common with pluggable
+ memory modules such as SODIMMs
+ SPD_EEPROM_ADDRESS
+ I2C address of the SPD EEPROM
+
+- CFG_SPD_BUS_NUM
+ If SPD EEPROM is on an I2C bus other than the first one, specify here.
+ Note that the value must resolve to something your driver can deal with.
+
- CONFIG_ETHER_ON_FEC[12]
Define to enable FEC[12] on a 8xx series processor.
- "u-boot" is an image in ELF binary format
- "u-boot.srec" is in Motorola S-Record format
+By default the build is performed locally and the objects are saved
+in the source directory. One of the two methods can be used to change
+this behavior and build U-Boot to some external directory:
+
+1. Add O= to the make command line invocations:
+
+ make O=/tmp/build distclean
+ make O=/tmp/build NAME_config
+ make O=/tmp/build all
+
+2. Set environment variable BUILD_DIR to point to the desired location:
+
+ export BUILD_DIR=/tmp/build
+ make distclean
+ make NAME_config
+ make all
+
+Note that the command line "O=" setting overrides the BUILD_DIR environment
+variable.
+
Please be aware that the Makefiles assume you are using GNU make, so
for instance on NetBSD you might need to use "gmake" instead of
CROSS_COMPILE=' ' MAKEALL
+When using the MAKEALL script, the default behaviour is to build U-Boot
+in the source directory. This location can be changed by setting the
+BUILD_DIR environment variable. Also, for each target built, the MAKEALL
+script saves two log files (<target>.ERR and <target>.MAKEALL) in the
+<source dir>/LOG directory. This default location can be changed by
+setting the MAKEALL_LOGDIR environment variable. For example:
+
+ export BUILD_DIR=/tmp/build
+ export MAKEALL_LOGDIR=/tmp/log
+ CROSS_COMPILE=ppc_8xx- MAKEALL
+
+With the above settings build objects are saved in the /tmp/build, log
+files are saved in the /tmp/log and the source tree remains clean during
+the whole build process.
+
+
See also "U-Boot Porting Guide" below.
4.4BSD, Linux, SVR4, Esix, Solaris, Irix, SCO, Dell, NCR, VxWorks,
LynxOS, pSOS, QNX, RTEMS, ARTOS;
Currently supported: Linux, NetBSD, VxWorks, QNX, RTEMS, ARTOS, LynxOS).
-* Target CPU Architecture (Provisions for Alpha, ARM, Intel x86,
+* Target CPU Architecture (Provisions for Alpha, ARM, AVR32, Intel x86,
IA64, MIPS, NIOS, PowerPC, IBM S390, SuperH, Sparc, Sparc 64 Bit;
- Currently supported: ARM, Intel x86, MIPS, NIOS, PowerPC).
+ Currently supported: ARM, AVR32, Intel x86, MIPS, NIOS, PowerPC).
* Compression Type (uncompressed, gzip, bzip2)
* Load Address
* Entry Point
-----------------
All contributions to U-Boot should conform to the Linux kernel
-coding style; see the file "Documentation/CodingStyle" in your Linux
-kernel source directory.
-
-Please note that U-Boot is implemented in C (and to some small parts
-in Assembler); no C++ is used, so please do not use C++ style
-comments (//) in your code.
+coding style; see the file "Documentation/CodingStyle" and the script
+"scripts/Lindent" in your Linux kernel source directory. In sources
+originating from U-Boot a style corresponding to "Lindent -pcs" (adding
+spaces before parameters to function calls) is actually used.
+
+Source files originating from a different project (for example the
+MTD subsystem) are generally exempt from these guidelines and are not
+reformated to ease subsequent migration to newer versions of those
+sources.
+
+Please note that U-Boot is implemented in C (and to some small parts in
+Assembler); no C++ is used, so please do not use C++ style comments (//)
+in your code.
Please also stick to the following formatting rules:
- remove any trailing white space